Double Helix of Icosahedra Structure and Spin Glass Magnetism of the δ-Co2.5Zn17.5-xMnx (x = 0.4-3.5) Pseudo-Binary Alloys.

We have synthesized δ-Co2.5Zn17.5-xMnx (x = 0.4-3.5) pseudo-binary alloys of 10 different compositions by a high-temperature solid-state synthetic route, determined their crystal structures and the Mn substitution pattern, and estimated the existence range of the δ-phase. The alloys crystallize in two chiral enantiomorphic space groups P62 and P64, where the basic atomic polyhedron of the chiral structure is an icosahedron and the neighboring icosahedra share vertices to form an infinitely long double helix along the hexagonal axis (like in the δ-Co2.5Zn17.5 parent binary phase). The alloys are pure δ-phase up to the Mn content x ≈ 3.5. The Mn atoms partially substitute Zn atoms at particular crystallographic sites located on the icosahedra. The study of magnetism was performed on the Co2.5Zn17.1Mn0.4 alloy with the lowest Mn content. Contrary to the expectation that structural chirality may induce the formation of a nontrivial magnetic state, a spin glass state with no relation to the structural chirality was found. The magnetic sublattice contains all of the necessary ingredients (randomness and frustration) for the formation of a spin glass state. Typical out-of-equilibrium dynamic phenomena of a spin system with broken ergodicity were detected below the spin freezing temperature Tf ≈ 8 K.

Resolving a structural issue in cerium-nickel-based oxide: a single compound or a two-phase system?

CeNiO3 has been reported in the literature in the last few years as a novel LnNiO3 compound with promising applications in different catalytic fields, but its structure has not been correctly reported so far. In this research, CeNiO3 (RB1), CeO2 and NiO have been synthesized in a nanocrystalline form using a modified citrate aqueous sol-gel route. A direct comparison between the equimolar physical mixture (n(CeO2) : n(NiO) = 1 : 1) and compound RB1 was made. Their structural differences were investigated by laboratory powder X-ray diffraction (PXRD), selected area electron diffraction (SAED), transmission electron microscopy (TEM) with an energy-dispersive X-ray spectroscopy (EDS) detector, and Raman spectroscopy. The surface of the compounds was analyzed by X-ray photoelectron spectroscopy (XPS), while the thermal behaviour was explored by thermogravimetric analysis (TGA). Their magnetic properties were also investigated with the aim of exploring the differences between these two compounds. There were clear differences between the physical mixture of CeO2 + NiO and RB1 presented by all of these employed methods. Synchrotron methods, such as atomic pair distribution function analysis (PDF), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), were used to explore the structure of RB1 in more detail. Three different models for the structural solution of RB1 were proposed. One structural solution proposes that RB1 is a single-phase pyrochlore compound (Ce2Ni2O7) while the other two solutions suggest that RB1 is a two-phase system of either CeO2 + NiO or Ce1-xNixO2 and NiO.

Photophysical Behavior of Triethylmethylammonium Tetrabromoferrate(III) under High Pressure.

The pressure-induced properties of hybrid organic-inorganic ferroelectrics (HOIFs) with tunable structures and selectable organic and inorganic components are important for device fabrication. However, given the structural complexity of polycrystalline HOIFs and the limited resolution of pressure data, resolving the structure-property puzzle has so far been the exception rather than the rule. With this in mind, we present a collection of in situ high-pressure data measured for triethylmethylammonium tetrabromoferrate(III), ([N(C2H5)3CH3][FeBr4]) (EMAFB) by unraveling its flexible physical and photophysical behavior up to 80 GPa. Pressure-driven X-ray diffraction and Raman spectroscopy disclose its soft and reversible structural distortion, creating room for delicate band gap modulation. During compression, orange turns dark red at ∼2 GPa, and further compression results in piezochromism, leading to opaque black, while decompressed EMAFB appears in an orange hue. Assuming that the mechanical softness of EMAFB is the basis for reversible piezochromic control, we present alternations in the electronic landscape leading to a 1.22 eV band narrowing at 20.3 GPa while maintaining the semiconducting character at 72 GPa. EMAFB exhibits an emission enhancement, manifested by an increase of photoluminescence up to 17.3 GPa, correlating with the onsets of structural distortion and amorphization. The stimuli-responsive behavior of EMAFB, exhibiting stress-activated modification of the electronic structure, can enrich the physical library of HOIFs suitable for pressure-sensing technologies.

Magneto-structural studies on a number of doubly end-on cyanate and azide bridged dinuclear nickel(ii) complexes with {N3O} donor Schiff base ligands.

Two new doubly µ 1,1-N3 bridged (1 and 3) and six new doubly µ 1,1-NCO bridged NiII complexes (2, 4-8) with six different N3O donor Schiff base ligands have been synthesized and magneto-structurally characterized. All these neutral complex molecules are isostructural and constitute edge sharing bioctahedral structures. Magnetic studies revealed that all these complexes exhibit ferromagnetic interaction through bridging pseudohalides with ferromagnetic coupling constant J being significantly higher for azide-bridged complexes than that of the cyanate analogues. This is consistent with the literature reported data and also the presence of polarizable π systems and two different N and O donor atoms in cyanate ion, rendering it a poor magnetic coupler in comparison to azide analogues. Although, the magneto-structurally characterized doubly µ 1,1-N3 bridged NiII complexes are abundant, only few such complexes with µ 1,1-bridging NCO- ions are reported in the literature. Remarkably, addition of these six new examples in this ever-growing series of doubly µ 1,1-NCO bridged systems gives us an opportunity to analyse the precise magneto-structural correlation in this system, showing a general trend in which the J value increases with an increase in bridging angles. Therefore, the high degree of structural and magnetic resemblances by inclusion of six new examples in this series is the major achievement of the present work. An elaborate DFT study was performed resulting in magneto-structural correlation showing that nature and value of the J-parameter is defined not only by Ni-Nb-Ni bond angles, but an important role is also played by the Ni1-Ni2-Nb-Xt dihedral angle (Nb and Xt are bridging N and terminal N or O atom of bridging ligands, respectively).

Combined experimental and theoretical studies on a series of mononuclear LnIII single-molecule magnets: dramatic influence of remote substitution on the magnetic dynamics in Dy analogues.

A series of LnIII complexes of general formula [Ln(H2L1)2(NO3)2(H2O)](NO3) (1-5) [Ln = Dy (1), Tb (2) Ho (3), Er (4), and Yb (5)] and an analogous DyIII complex with ligand H2L2, [Dy(H2L2)2(NO3)3(H2O)](NO3) (6), where H2L1 and H2L2 stand for (E)-2-[(2-hydroxyphenyl)iminomethyl]-6-methoxy-4-methylphenol and (E)-2-[(2-hydroxy-5-methylphenyl)iminomethyl]-6-methoxy-4-methylphenol, respectively, have been synthesized and magneto-structurally characterized. All these complexes are isostructural and isomorphous, in which the zwitterionic form of the ligands predominantly coordinate the metal centers. The magnetic study revealed that complex 3 displays negligible SMM behaviour, while 1 and 6 are zero field SMMs, the performance of which can largely be improved in the presence of an applied dc field by lowering under barrier relaxation processes, and finally 2, 4, and 5 are field-induced SMMs. The most remarkable observation in the present study is the dramatically-enhanced SMM performance in 6 compared to 1, achieved by only a remote methyl substitution at the ligand framework to increase the intermolecular separation. Although SINGLE_ANISO ab initio calculations for 1 and 6 are very similar, the POLY_ANISO module revealed weak dipolar interactions in both the compounds but significant antiferromagnetic interaction in 1, thereby justifying the experimental fact. The present work discloses that even a small substitution such as a methyl group can adequately increase the intermolecular separation, leading to several-fold enhanced effective energy barrier.

DFT Insight into Conductive and Magnetic Properties of Heterostructures with BaTiO3 Overlayer.

The ab initio calculations of a heterostructure based on the ferroelectric phase of barium titanate and dielectrics lanthanum manganese (LaMnO3) or silicon (Si) are presented. We analyze structures of BaTiO3/LaMnO3 and BaTiO3/Si interfaces, investigate magnetic properties and the impact of ferroelectric polarization. The use of ferroelectrics in the heterostructure plays a crucial role; in particular, ferroelectric polarization leads to the appearance of the conducting state at the interface and in the layers close to it. We show that defects (here, oxygen vacancies) incorporated into the system may change the electronic and magnetic properties of a system. Experimental results of magnetic susceptibility measurements for the Ba0.8Sr0.2TiO3/LaMnO3 heterostructure are also presented. It is shown that a correlation between the behavior of the ferromagnetic ordering and the resistance takes place. In addition, the ferromagnetic ordering at the interface of the heterostructure can be associated with the exchange interaction through current carriers that appear in high carrier concentration regions.

Finding the True Catalyst for Water Oxidation at Low Overpotential in the Presence of a Metal Complex.

The design of molecular-based catalysts for oxygen-evolution reaction (OER) requires more investigations for the true catalyst to be found. First-row transition metal complexes are extensively investigated for OER, but the role of these metal complexes as a true catalyst is doubtful. Some doubts have been expressed about the role of first-row transition metal complexes for OER at high overpotentials (η > 450). Generally, the detection of the true catalyst has so far been focused on high overpotentials (η > 450) because at low overpotentials (η < 450), many methods are not sensitive enough to detect small amounts of heterogeneous catalysts on the electrode surface during the first seconds of the reaction. Ni(II) phthalocyanine-tetra sulfonate tetrasodium (1) is in moderate conditions (at 20-50 °C and pH 5-13) in the absence of electrochemical driving forces, which could make it noteworthy for OER. Herein, the results of OER in the presence of 1 at low overpotentials under alkaline conditions are presented. In addition, in the presence of Ni complexes, using an Fe ion is introduced as a new method for detecting Ni (hydr)oxide under OER. Our experiments indicate that in the presence of a homogeneous OER (pre)catalyst, a deep investigation is necessary to rule out the heterogeneous catalysts formed. Our approach is a roadmap in the field of catalysis to understand the OER mechanism in the presence of a molecular Ni-based catalyst design. Our results shown in this study are likely to open up new perspectives and discussion on many molecular catalysts in a considerable part of the chemistry community.

Humidity-Sensing Properties of an 1D Antiferromagnetic Oxalate-Bridged Coordination Polymer of Iron(III) and Its Temperature-Induced Structural Flexibility.

A novel one-dimensional (1D) oxalate-bridged coordination polymer of iron(III), {[NH(CH3)(C2H5)2][FeCl2(C2O4)]}n (1), exhibits remarkable humidity-sensing properties and very high proton conductivity at room temperature (2.70 × 10-4 (Ω·cm)-1 at 298 K under 93% relative humidity), in addition to the independent antiferromagnetic spin chains of iron(III) ions bridged by oxalate groups (J = -7.58(9) cm-1). Moreover, the time-dependent measurements show that 1 could maintain a stable proton conductivity for at least 12 h. Charge transport and magnetic properties were investigated by impedance spectroscopy and magnetization measurements, respectively. Compound 1 consists of infinite anionic zig-zag chains [FeCl2(C2O4)]nn- and interposed diethylmethylammonium cations (C2H5)2(CH3)NH+, which act as hydrogen bond donors toward carbonyl oxygen atoms. Extraordinarily, the studied coordination polymer exhibits two reversible phase transitions: from the high-temperature phase HT to the mid-temperature phase MT at T ~213 K and from the mid-temperature phase MT to the low-temperature phase LT at T ~120 K, as revealed by in situ powder and single-crystal X-ray diffraction. All three polymorphs show large linear thermal expansion coefficients.

Proton controlled synthesis of two dicopper(II) complexes and their magnetic and biomimetic catalytic studies together with probing the binding mode of the substrate to the metal center.

This paper describes the synthesis, and structural and spectroscopic characterizations of two doubly bridged dicopper(II) complexes, [Cu2(µ-H2L)(µ-OMe)](ClO4)4·2H2O (1) and [Cu2(µ-L)(µ-OH)](ClO4)2 (2), with a binucleating ligand (HL) derived from the Schiff base condensation of DFMP and N,N-dimethyldipropylenetriamine, and their biomimetic catalytic activities were related to CAO and phenoxazinone synthase using 3,5-di-tert-butylcatechol and o-aminophenol (OAPH), respectively, as model substrates. Structural studies reveal that the major differences in these structures appear to be from the distinct roles of the tertiary amine groups of the ligands, which are protonated in 1, whereas it coordinates the metal centers in 2. Magnetic studies disclose that two copper(II) centers are strongly antiferromagnetically coupled with slightly different J values, which is further interpreted and discussed. They exhibited very different biomimetic catalytic activities; whereas 2 is an efficient catalyst, complex 1 showed somewhat lower substrate oxidation. The higher reactivity in 2 is rationalized by the strong involvement of the tertiary amine group of the Schiff base ligand, where the substrate oxidation is favored because of the transfer of protons from the substrate to the tertiary amine group, showing the importance of the functional groups in proximity to the bimetallic active site. Emphasis was also given to probing the binding mode of the substrate using an electronically deficient tetrabromomocatechol (Br4CatH2) and the isolated compound [Cu6(µ-HL)2(µ-OH)2(Br4Cat)4](NO3)2·4H2O (3) which suggests that monodentate asymmetric binding of 3,5-di-tert-butylcatechol and OAPH occurs during the course of the catalytic reaction.

A Carbonate-Templated Decanuclear Mn Nanocage with Two Different Silsesquioxane Ligands.

The mild reaction of the preorganized silsesquioxane precursor with Mn(II) acetate under ambient conditions results in a mixed-valent {MnII6MnIII4} nanocage (SD/Mn10) which is protected by both acyclic trimer [Si3] and cyclic tetramer [Si4]. Serendipitous capture of atmospheric CO2 as a µ5-carbonate anion placed at the center supports the formation of the cluster. The magnetic analysis reveals the strong antiferromagnetic interactions between Mn ions. Moreover, the drop-casting film of SD/Mn10 shows photoelectric activity indicating its great potential as a semiconductor for photoelectric conversion applications.

Carboxylic acid-tuned nickel(ii) clusters: syntheses, structures, solution behaviours and magnetic properties.

Three novel cicada-like nickel(ii) clusters, formulated as [Ni6(bdped)2(mba)6(Hdmpz)2(NO3)2(H2O)2]·4MeCN (SD/Ni6b), [Ni5(bdped)2(tca)6(Hdmpz)(MeOH)2(H2O)]·MeOH (SD/Ni5a) and [Ni4(Hbdped)2(ba)4(Hdmpz)2]·2NO3·2MeCN (SD/Ni4a), were obtained by tuning the auxiliary carboxylic acids, where H2bdped = 1,2-bis-(3,5-dimethylpyrazol-1-yl)-ethane-1,2-diol; Hmba = 2-methylbenzoic acid; Hdmpz = 3,5-dimethyl-1H-pyrazole; Htca = 3-thiophenecarboxylic acid; and Hba = benzoic acid. The structures of SD/Ni6b, SD/Ni5a and SD/Ni4a are built from a central Ni4O4 opened cube, appending two to zero NiNO5 octahedra. The solution behaviours of SD/Ni6b, SD/Ni5a and SD/Ni4a were studied in detail via an ESI-MS technique and their solution stabilities were confirmed. Magnetic analysis indicated the presence of Ising-type anisotropy: D = -13, -10, and -11 cm-1 for SD/Ni6b, SD/Ni5a, and SD/Ni4a, respectively; moreover, dominantly ferromagnetic interactions were found between magnetic centers: J1 = 6.5 cm-1, J2 = -0.44 cm-1 and J1 = 5.9 cm-1, J2 = 2.6 cm-1 for SD/Ni5a and SD/Ni4a, respectively. Besides, the photocurrent signals were observed and they reached the maximum very quickly for these three nickel(ii) clusters and then their current intensities remained almost constant, which provide a possibility to be used for light-harvesting and photo-related catalysis.

Structural Model and Spin-Glass Magnetism of the Ce3Au13Ge4 Quasicrystalline Approximant.

In a search for unconventional heavy-Fermion compounds with the localized 4f moments distributed quasiperiodically instead of a conventional distribution on a regular, translationally periodic lattice, we have successfully synthesized a stable Ce3Au13Ge4 Tsai-type 1/1 quasicrystalline approximant of the off-stoichiometric composition Ce3+xAu13+yGe4+z (x = 0.17, y = 0.49, z = 1.08) and determined its structural model. The structure is body-centered-cubic (bcc), with space group Im3̅, unit cell parameter a = 14.874(3) Å, and Pearson symbol cI174, and can be described as a bcc packing of partially interpenetrating multishell rhombic triacontahedral clusters. The cerium sublattice, corresponding to the magnetic sublattice, consists of a bcc packing of Ce icosahedra with an additional Ce atom in a partially occupied site (occupation 0.7) at the center of each icosahedron. The measurements of its magnetic properties and the specific heat have demonstrated that it is a regular intermetallic compound with no resemblance to heavy-Fermion systems. The partially occupied Ce2 site in the center of each Ce1 icosahedron, the mixed-occupied Au/Ge ligand sites between the Ce2 and Ce1 atoms, and the random compositional fluctuations due to nonstoichiometry of the investigated Ce3+xAu13+yGe4+z alloy introduce randomness into the Ce magnetic sublattice, which causes a distribution of the indirect-exchange antiferromagnetic interactions between the spins. Together with the geometric frustration of the triangularly distributed Ce moments, this leads to a spin-glass phase below the spin freezing temperature Tf ≈ 0.28 K.

Aggregated manganese complex-nanolayered manganese oxide: a new hybrid molecular-inorganic material.

Layered materials such as clays, layered double hydroxides, and layered hydroxides are promising compounds for material science applications because, in addition to their structural and functional properties, the aggregation of these compounds with others results in new structural and functional characteristics. Notably, the aggregation of a metal complex and nanolayered material leads to new structures and properties. Mn oxides and complexes are different compounds, which show promising properties. Herein, a new hybrid molecular-inorganic material was synthesized by the aggregation of a manganese complex with a 2,4,6-tris(2-pyridyl)-1,3,5-triazine ligand and monolayers of Mn oxide. This new hybrid molecular-inorganic material was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, microanalysis, UV-Vis spectroscopy, nitrogen adsorption-desorption isotherm, magnetic properties, and electron paramagnetic resonance spectroscopy. All these methods showed that the aggregation of the manganese complex and layered Mn oxide occurred. A larger extent of aggregation for this hybrid molecular-inorganic material was observed compared to monolayered Mn oxide. The new material constitutes a new family of hybrid molecular-inorganic materials, in which transition metal complexes could be placed in a new environment.

Copper(II)-Assisted Ligand Fragmentation Leading to Three Families of Metallamacrocycle.

We present an unprecedented copper(II)-assisted organic ligand fragmentation process under basic conditions leading to several ligands within three families of metallamacrocycle, Cu6, Cu8, and Cu16. The sequential multistep reaction include (i) the deprotonation of the starting alcohol, 1,2-bis(3,5-dimethyl-pyrazol-1-yl)ethane-1,2-diol (H2bdped) to its diolate bdped followed by complexation through six bonds (µ6) to three copper atoms in a ring, (ii) the breaking of the ethane-pyrazole C-N bonds by the different solvent alcohols to form 1-(3,5-dimethyl-pyrazol-1-yl)-2-methoxyethane-1,2-diolate (dpmed) or 2-(3,5-dimethyl-pyrazol-1-yl)-2-hydroxyacetate (dpet), while retaining coordination to the copper centers and (iii) the final step to ethane-1,1,2,2-tetraolate, C2H2O44- (et). Importantly, the latter product, only observed on two previous occasions, occupies the core of Cu6 and Cu16 through exceptionally eight coordination bonds (µ8). Its alkyl esters, 2-alkoxyethane-1,1,2-triolate (met, eet, and pet), also occupy the central parts of Cu8 but forming six bonds (µ6) instead. The other product, 3,5-dimethylpyrazolate (dp), acts as peripheral bridges (µ2) but it is not involved in coordination if the starting salt is copper acetate, this may be a consequence of acetate being a better µ2-chelating ligand. In the presence of an oxidizing agent, K2Cr2O7, C2H2O44- (et) is oxidized to oxalate, C2O42- (ox). Thus, an additional µ3-hydroxide and µ4-oxalate in Cu16 widen the complexity of the structures, not to mention the range of coordination geometries of the copper centers, though in the present cases they can be classed in only two types: distorted square-planar and square-pyramid. In addition to single-crystal crystallography, the results from different techniques such as IR, ESI-MS, optical UV-vis, and SQUID magnetometry help in the characterization of these rare metallamacrocycles made from unexpected and in situ generated ligands. We believe the results of the organic transformations are highly relevant to von Liebig's benzil-benzilic acid rearrangement.

Nanocrystalline Antiferromagnetic High-κ Dielectric Sr2NiMO6 (M = Te, W) with Double Perovskite Structure Type.

Double perovskites have been extensively studied in materials chemistry due to their excellent properties and novel features attributed to the coexistence of ferro/ferri/antiferro-magnetic ground state and semiconductor band gap within the same material. Double perovskites with Sr2NiMO6 (M = Te, W) structure type have been synthesized using simple, non-toxic and costless aqueous citrate sol-gel route. The reaction yielded phase-pure nanocrystalline powders of two compounds: Sr2NiWO6 (SNWO) and Sr2NiTeO6 (SNTO). According to the Rietveld refinement of powder X-ray diffraction data at room temperature, Sr2NiWO6 is tetragonal (I4/m) and Sr2NiTeO6 is monoclinic (C12/m1), with average crystallite sizes of 49 and 77 nm, respectively. Structural studies have been additionally performed by Raman spectroscopy revealing optical phonons typical for vibrations of Te6+/W6+O6 octahedra. Both SNTO and SNWO possess high values of dielectric constants (341 and 308, respectively) with low dielectric loss (0.06 for SNWO) at a frequency of 1 kHz. These values decrease exponentially with the increase of frequency to 1000 kHz, with the dielectric constant being around 260 for both compounds and dielectric loss being 0.01 for SNWO and 0.04 for SNTO. The Nyquist plot for both samples confirms the non-Debye type of relaxation behavior and the dominance of shorter-range movement of charge carriers. Magnetic studies of both compounds revealed antiferromagnetic behavior, with Néel temperature (TN) being 57 K for SNWO and 35 K for SNTO.

Self-assembly of a nonanuclear NiII cluster via atmospheric CO2 fixation: synthesis, structure, collision-induced dissociation mass spectrometry and magnetic property.

A novel nonanuclear nickel(ii) cluster identified as [Ni9(OH)6(CO3)2(ba)8(Hdmpz)6(DMF)2]·EtOH·2DMF (SD/Ni9a, Hba = benzoic acid, Hdmpz = 3,5-dimethyl-1H-pyrazole) is successfully constructed from mixed ligands. The single-crystal X-ray diffraction (SCXRD) structural analysis confirms the composition and reveals the "drum-like" inner core structure surrounded by ba- and DMF. Six Hdmpz ligands in their neutral form further sandwich the "drum" up and down, and is hydrogen bonded with two carbonate anions that are derived from the atmospheric CO2 with the help of Et3N. Electrospray ionization mass spectrometry (ESI-MS) reveals that the SD/Ni9a maintains an intact core in the solution with a slight exchange of outer ligands. Detailed collision-induced dissociation (CID) experiments reveal the collision energy (CE)-promoted ligand loss and exchange between ba- and Hdmpz. Furthermore, the magnetic study shows that there is no interaction between the Ni centers at room temperature, whereas the ferromagnetic coupling between the Ni centers is found with an S = 3 spin ground state of the cluster at low temperature. Moreover, the UV-vis spectrum and the photocurrent response measurements show its good optical properties with an indirect bandgap of about 2.35 eV and fast current response upon visible light irradiation.

Magnetoelectric Coupling Springing Up in Molecular Ferroelectric: [N(C2H5)3CH3][FeCl4].

A molecule-based ferroelectric triethylmethylammonium tetrachloroferrate(III) ([N(C2H5)3CH3][FeCl4]) powder was designed as a multifunctional material exhibiting excellent multiple bistability. Prepared by the slow evaporation method at room temperature, the compound crystallizes in the non-centrosymmetric assembly of hexagonal symmetry (P63mc space group) which undergoes a reversible temperature-triggered phase transition pinpointed at 363 K to the centrosymmetric packing within the P63/mmc space group. Aside from the inseparable role of the symmetry-breaking process smoothly unveiled from the X-ray powder diffraction data, a striking change in the dielectric permittivity observed during the paraelectric-to-ferroelectric phase transition directly discloses the bistable dielectric behavior-an exceptionally high increase in the dielectric permittivity of about 360% at 100 kHz across the heating and cooling cycles is direct proof showing the highly desirable stimuli-responsive electric ordering in this improper ferroelectric architecture. Due to the magnetically modulated physical properties resulting in the coupling of magnetic and electric orderings, the flexible assembly of [N(C2H5)3CH3][FeCl4] could be used to boost the design and development of novel magnetoelectric devices.

An Octanuclear Cobalt Cluster Protected by Macrocyclic Ligand: In Situ Ligand-Transformation-Assisted Assembly and Single-Molecule Magnet Behavior.

Macrocyclic molecules with multiple coordination sites have been widely used as promising ligands to build polynuclear metal clusters; however, cyclic silsesquioxane-based metal clusters are still rare. Herein, we report a new octanuclear Co-silsesquioxane cluster [Co8(OH)2{(MeSiO2)6}2(bpy)2(Obpy)2] (SD/Co8c; SD = SunDi), wherein the Co8 disc-like core is sandwiched by two hexamethylcyclohexasiloxanolate ligands (MeSiO2)6 at two poles and finally encircled by two bpy (bpy = 2,2'-bipyridine) and two Obpy (HObpy = 6-hydroxy-2,2'-bipyridine) ligands at the equatorial region. Interestingly, both MeSi(OMe)3 and bpy undergo in situ transformations to generate hexameric cyclic (MeSiO2)6 and Obpy, respectively. The unusual hydroxylation of bpy and the OH- anion in the center of Co8 core provide additional binding sites to induce the formation of the larger cluster instead of the traditional hexanuclear cluster. The solution stability and fragmentation route in the gas phase were studied by cold-spray ionization and collision-induced dissociation mass spectrometry, respectively. Both results reveal that the Co8 core is quite stable in solution as well as in the gas phase, even with increased collision voltage. Magnetic susceptibility studies of SD/Co8c show the slow magnetization relaxation indicative of single-molecule magnet (SMM) behavior. This work not only presents the multiple in situ ligand-transformation-assisted assembly of polynuclear cobalt cluster but also provides some new insights into the magnetism-structure relationship for SMMs.

A Polyoxochromate Templated 56-Nuclei Silver Nanocluster.

Most of polyoxometallates (POMs) templated silver nanoclusters recorded so far are polyoxomolybdates and polyoxotungstates; however, as congeneric polyoxochromates, they are rarely observed in silver nanoclusters. Herein, a high-nuclearity polyoxochromate, (CrIII4CrVI8O36)12-, is uncovered in a novel silver nanocluster (SD/Ag56a) as an anion template. The mixed-valent (CrIII4CrVI8O36)12- consists of four edge-sharing CrIIIO6 octahedra and eight CrVIO4 tetrahedra, which are fused together by sharing one or two vertexes. The (CrIII4CrVI8O36)12- is the by far highest nuclearity polyoxochromate and is trapped by outer Ag56 bracelet-like shell coprotected by quaternary ligands including iPrS-, NapCOO- (2-naphthalenecarboxylate), CF3COO-, and CH3CN. The antiferromagnetic property and solution behavior of SD/Ag56a are discussed in detail.

A biradical oxo-molybdenum complex containing semiquinone and o-aminophenol benzoxazole-based ligands.

We report a new mononuclear molybdenum(iv) complex, MoOLBISLSQ, in which LSQ (2,4-di-tert-butyl o-semibenzoquinone ligand) has been prepared from the reaction of the o-iminosemibenzoquinone form of a tridentate non-innocent benzoxazole ligand, LBIS, and MoO2(acac)2. The complex was characterized by X-ray crystallography, elemental analysis, IR and UV-vis spectroscopy and magnetic susceptibility measurements. The crystal structure of MoOLBISLSQ revealed a distorted octahedral geometry around the metal centre, surrounded by one O and two N atoms of LBIS and two O atoms of LSQ. The effective magnetic moment (µ eff) of MoOLBISLSQ decreased from 2.36 to 0.2 µB in the temperature range of 290 to 2 K, indicating a singlet ground state caused by antiferromagnetic coupling between the metal and ligand centred unpaired electrons. Also, the latter led to the EPR silence of the complex. Cyclic voltammetry (CV) studies indicate both ligand and metal-centered redox processes. MoOLBISLSQ was applied as a catalyst for the oxidative cleavage of cyclohexene to adipic acid and selective oxidation of sulfides to sulfones with aqueous hydrogen peroxide.