Nanotechnology synergized immunoengineering for cancer.

Novel strategies modulating the immune system yielded enhanced anticancer responses and improved cancer survival. Nevertheless, the success rate of immunotherapy in cancer treatment has been below expectation(s) due to unpredictable efficacy and off-target effects from systemic dosing of immunotherapeutic(s). As a result, there is an unmet clinical need for improving conventional immunotherapy. Nanotechnology offers several new strategies, multimodality, and multiplex biological targeting advantage to overcome many of these challenges. These efforts enable programming the pharmacodynamics, pharmacokinetics, and delivery of immunomodulatory agents/co-delivery of compounds to prime at the tumor sites for improved therapeutic benefits. This review provides an overview of the design and clinical principles of biomaterials driven nanotechnology and their potential use in personalized nanomedicines, vaccines, localized tumor modulation, and delivery strategies for cancer immunotherapy. In this review, we also summarize the latest highlights and recent advances in combinatorial therapies availed in the treatment of cold and complicated tumors. It also presents key steps and parameters implemented for clinical success. Finally, we analyse, discuss, and provide clinical perspectives on the integrated opportunities of nanotechnology and immunology to achieve synergistic and durable responses in cancer treatment.

Ultrahigh Penetration and Retention of Graphene Quantum Dot Mesoporous Silica Nanohybrids for Image Guided Tumor Regression.

So far, near-infrared (NIR) light responsive nanostructures have been well-defined in cancer nanomedicine. However, poor penetration and retention in tumors are the limiting factors. Here, we report the ultrahigh penetration and retention of carbanosilica (graphene quantum dots, GQDs embedded mesoporous silica) in solid tumors. After NIR light exposure, quick (0.5 h) emission from the tumor area is observed that is further retained up to a week (tested up to 10 days) with a single dose administration of nanohybrids. Emissive and photothermally active GQDs and porous silica shell (about 31% drug loading) make carbanosilica a promising nanotheranostic agent exhibiting 68.75% tumor shrinking compared to without NIR light exposure (34.48%). Generated heat (∼52 °C) alters the permeability of tumor enhancing the accumulation of nanotheranostics into the tumor environment. Successive tumor imaging ensures the prolonged follow-up of image guided tumor regression due to synergistic therapeutic effect of nanohybrids.

Liposomal nanotheranostics for multimode targeted in vivo bioimaging and near-infrared light mediated cancer therapy.

Developing a nanotheranostic agent with better image resolution and high accumulation into solid tumor microenvironment is a challenging task. Herein, we established a light mediated phototriggered strategy for enhanced tumor accumulation of nanohybrids. A multifunctional liposome based nanotheranostics loaded with gold nanoparticles (AuNPs) and emissive graphene quantum dots (GQDs) were engineered named as NFGL. Further, doxorubicin hydrochloride was encapsulated in NFGL to exhibit phototriggered chemotherapy and functionalized with folic acid targeting ligands. Encapsulated agents showed imaging bimodality for in vivo tumor diagnosis due to their high contrast and emissive nature. Targeted NFGL nanohybrids demonstrated near infrared light (NIR, 750 nm) mediated tumor reduction because of generated heat and Reactive Oxygen Species (ROS). Moreover, NFGL nanohybrids exhibited remarkable ROS scavenging ability as compared to GQDs loaded liposomes validated by antitumor study. Hence, this approach and engineered system could open new direction for targeted imaging and cancer therapy.

Polymeric Core-Shell Combinatorial Nanomedicine for Synergistic Anticancer Therapy.

Core-shell nanostructures are promising platforms for combination drug delivery. However, their complicated synthesis process, poor stability, surface engineering, and low biocompatibility are major hurdles. Herein, a carboxymethyl chitosan-coated poly(lactide-co-glycolide) (cmcPLGA) core-shell nanostructure is prepared via a simple one-step nanoprecipitation self-assembly process. Engineered core-shell nanostructures are tested for combination delivery of loaded docetaxel and doxorubicin in a cancer-mimicked environment. The drugs are compartmentalized in a shell (doxorubicin, Dox) and a core (docetaxel, Dtxl) with loading contents of ∼1.2 and ∼2.06%, respectively. Carboxymethyl chitosan with both amine and carboxyl groups act as a polyampholyte in diminishing ζ-potential of nanoparticles from fairly negative (-13 mV) to near neutral (-2 mV) while moving from a physiological pH (7.4) to an acidic tumor pH (6) that can help the nanoparticles to accumulate and release the drug on-site. The dual-drug formulation was found to carry a clinically comparable 1.7:1 weight ratio of Dtxl/Dox, nanoengineered for the sequential release of Dox followed by Dtxl. Single and engineered combinatorial nanoformulations show better growth inhibition toward three different cancer cells compared to free drug treatment. Importantly, Dox-Dtxl cmcPLGA nanoparticles scored synergism with combination index values between 0.2 and 0.3 in BT549 (breast ductal carcinoma), PC3 (prostate cancer), and A549 (lung adenocarcinoma) cell lines, demonstrating significant cell growth inhibition at lower drug concentrations as compared to single-drug control groups. The observed promising performance of dual-drug formulation is due to the G2/M phase arrest and apoptosis.

Specific detection of tetanus toxoid using an aptamer-based matrix.

Batch-to-batch variation of therapeutic proteins produced by biological means requires rigorous monitoring at all stages of the production process. A large number of animals are employed for risk assessment of biologicals, which has low ethical and economic acceptability. Research is now focussed on the validation of in vitro and ex vivo tests to replace live challenges. Among in vitro methods, enzyme-linked immunosorbent assay (ELISA) is considered to be the gold standard for estimation of integrity of tetanus toxoid. ELISA utilizes antibodies for detection, which, because of their biological origin and limited modifiability, may have low stability and result in irreproducibility. We have developed a method using highly specific and selective RNA aptamers for detection of tetanus toxoid. Using displacement assay, we first identified aptamers which bind to different aptatopes on the surface of the toxoid. Pairs of these aptamers were employed as capture-detection ligands in a sandwich-ALISA (aptamer-linked immobilized sorbent assay) format. The binding efficiency was confirmed by the fluorescence intensity in each microtire plate well. Using aptamers alone, detection of tetanus toxoid was possible with the same level of sensitivity as antibody. Aptamers were also used in the capture ALISA format. Adjuvanted tetanus toxoid was subjected to accelerated stress testing, including thermal, mechanical and freeze-thawing stress conditions. The loss in antigenicity of the preparation determined by ALISA in each case was found to be similar to that determined by conventional ELISA. Thus, it is possible to replace antibodies with aptamers to develop a more robust detection tool for tetanus toxoid.

Glassy-state stabilization of a dominant negative inhibitor anthrax vaccine containing aluminum hydroxide and glycopyranoside lipid A adjuvants.

During transport and storage, vaccines may be exposed to temperatures outside of the range recommended for storage, potentially causing efficacy losses. To better understand and prevent such losses, dominant negative inhibitor (DNI), a recombinant protein antigen for a candidate vaccine against anthrax, was formulated as a liquid and as a glassy lyophilized powder with the adjuvants aluminum hydroxide and glycopyranoside lipid A (GLA). Freeze-thawing of the liquid vaccine caused the adjuvants to aggregate and decreased its immunogenicity in mice. Immunogenicity of liquid vaccines also decreased when stored at 40°C for 8 weeks, as measured by decreases in neutralizing antibody titers in vaccinated mice. Concomitant with efficacy losses at elevated temperatures, changes in DNI structure were detected by fluorescence spectroscopy and increased deamidation was observed by capillary isoelectric focusing (cIEF) after only 1 week of storage of the liquid formulation at 40°C. In contrast, upon lyophilization, no additional deamidation after 4 weeks at 40°C and no detectable changes in DNI structure or reduction in immunogenicity after 16 weeks at 40°C were observed. Vaccines containing aluminum hydroxide and GLA elicited higher immune responses than vaccines adjuvanted with only aluminum hydroxide, with more mice responding to a single dose.

Formulation and stabilization of recombinant protein based virus-like particle vaccines.

Vaccine formulation development has traditionally focused on improving antigen storage stability and compatibility with conventional adjuvants. More recently, it has also provided an opportunity to modify the interaction and presentation of an antigen/adjuvant to the immune system to better stimulate the desired immune responses for maximal efficacy. In the last decade, there has been a paradigm shift in vaccine antigen and formulation design involving an improved physical understanding of antigens and a better understanding of the immune system. In addition, the discovery of novel adjuvants and delivery systems promises to further improve the design of new, more effective vaccines. Here we describe some of the fundamental aspects of formulation design applicable to virus-like-particle based vaccine antigens (VLPs). Case studies are presented for commercially approved VLP vaccines as well as some investigational VLP vaccine candidates. An emphasis is placed on the biophysical analysis of vaccines to facilitate formulation and stabilization of these particulate antigens.

Protein comparability assessments and potential applicability of high throughput biophysical methods and data visualization tools to compare physical stability profiles.

In this review, some of the challenges and opportunities encountered during protein comparability assessments are summarized with an emphasis on developing new analytical approaches to better monitor higher-order protein structures. Several case studies are presented using high throughput biophysical methods to collect protein physical stability data as function of temperature, agitation, ionic strength and/or solution pH. These large data sets were then used to construct empirical phase diagrams (EPDs), radar charts, and comparative signature diagrams (CSDs) for data visualization and structural comparisons between the different proteins. Protein samples with different sizes, post-translational modifications, and inherent stability are presented: acidic fibroblast growth factor (FGF-1) mutants, different glycoforms of an IgG1 mAb prepared by deglycosylation, as well as comparisons of different formulations of an IgG1 mAb and granulocyte colony stimulating factor (GCSF). Using this approach, differences in structural integrity and conformational stability profiles were detected under stress conditions that could not be resolved by using the same techniques under ambient conditions (i.e., no stress). Thus, an evaluation of conformational stability differences may serve as an effective surrogate to monitor differences in higher-order structure between protein samples. These case studies are discussed in the context of potential utility in protein comparability studies.

Stabilization of tetanus toxoid formulation containing aluminium hydroxide adjuvant against agitation.

The aggregation of tetanus toxoid leads to reduced bioavailability of the vaccine and failure of immunization programmes in many parts of the globe. One of the main reasons for denaturation and aggregation of tetanus toxoid formulations is agitation of the protein during transport. We have identified that agitation leads to collapse of the gel matrix of aluminium hydroxide which is used as an adjuvant in these preparations. This results in desorption of the toxoid from the matrix, which then loses its antigenicity due to agitation-induced denaturation of the protein. We show that incorporation of some compatible osmolytes like sorbitol, glucose and arginine, but not trehalose, is able to protect the adjuvant matrix from degradation, and retain the integrity of the vaccine preparation in terms of its antigenicity.

Stabilization of tetanus toxoid formulation containing aluminium hydroxide adjuvant against freeze-thawing.

Exposure to subzero temperature leads to loss of vaccine potency. This can happen due to degradation of adjuvant surface and/or inactivation of the antigen. When adsorbed on aluminium hydroxide and subjected to freeze-thawing, tetanus toxoid was desorbed from the gel matrix and the preparation was found to lose its antigenicity. Analyses showed that the gel particles were denatured after freezing. When freeze-thawing was carried out in the presence of glucose, sorbitol and arginine, the degradation of gel particles was inhibited. A higher fraction of the protein could be retained on the gel. However, the antigenicity of these preparations was quite low. In the presence of trehalose, the protein could be partially retained on aluminium hydroxide. Being a cryoprotectant, trehalose was also able to inhibit the freezing-induced denaturation of tetanus toxoid, which resulted in retention of antigenicity of the adjuvanted toxoid.

Role of trehalose in moisture-induced aggregation of bovine serum albumin.

Moisture-induced aggregation has been identified as a key problem in the long term storage stability of therapeutic proteins. In the present work, we have investigated the impact of the disaccharide trehalose on the aggregation behavior of a model protein, bovine serum albumin (BSA) under moist conditions. About 50% aggregation of BSA was observed at a moisture level of 8 microl/10mg protein. Including trehalose in the protein sample caused a significant reduction in aggregation. We address the probable mechanisms for the protective effect of trehalose by considering the various hypotheses that have been proposed in the literature. The techniques that have been used include denaturing and non-denaturing gel electrophoresis and tryptophan intrinsic fluorescence. The nature of the aggregates was studied by carrying out electrophoresis of the aggregated protein in the presence of reducing and chaotropic reagents. The interaction studies of aggregated BSA with Thioflavin T and CongoRed indicate the possibility of amyloid type of character in the former. These studies may explain the protective role of trehalose under conditions where the storage stability of therapeutic proteins is compromised.