RESUMO
For the first time, the optimized stellarator Wendelstein 7-X has operated with an island divertor. An operation regime in hydrogen was found in which the total plasma radiation approached the absorbed heating power without noticeable loss of stored energy. The divertor thermography recorded simultaneously a strong reduction of the heat load on all divertor targets, indicating almost complete power detachment. This operation regime was stably sustained over several energy confinement times until the preprogrammed end of the discharge. The plasma radiation is mainly due to oxygen and is located at the plasma edge. This plasma scenario is reproducible and robust at various heating powers, plasma densities, and gas fueling locations. These experimental results show that the island divertor concept actually works and displays good power dissipation potential, producing a promising exhaust concept for the stellarator reactor line.
RESUMO
Electron temperature gradient (ETG)-driven turbulence, despite its ultrafine scale, is thought to drive significant thermal losses in magnetic fusion devices-but what role does it play in stellarators? The first numerical simulations of ETG turbulence for the Wendelstein 7-X stellarator, together with power balance analysis from its initial experimental operation phase, suggest that the associated transport should be negligible compared to other channels. The effect, we argue, originates essentially from the geometric constraint of multiple field periods, a generic feature of stellarators.
RESUMO
Modifications of magnetic and magneto-optical properties of Pt/Co(d Co )/Pt upon Ar+ irradiation (with energy 1.2, 5 and 30 keV) and fluence, F at the range from 2 · 1013-2 · 1016 Ar+ cm-2) were studied. Two 'branches' of increased perpendicular magnetic anisotropy (PMA) and enhanced magneto-optical response are found on 2D (d Co , F) diagrams. The difference in F between 'branches' is driven by ion energy. Structural features correlated with magnetic properties have been analysed thoroughly by x-ray diffraction, Rutherford backscattering spectrometry and positron annihilation spectroscopy. Experimental results are in agreement with TRIDYN numerical calculations of irradiation-induced layers intermixing. Our work discusses particularly structural factors related to crystal lattice defects and strain, created and modified by irradiation, co-responsible for the increase in the PMA.
RESUMO
Two graphite divertor elements called scrapers have been installed on the Wendelstein 7-X stellarator in the throat of the magnetic island divertor. To diagnose one, we have designed, built, calibrated, and installed a new infrared/visible imaging endoscope system to enable detailed observations of the plasma interactions and heat loads at one of the scrapers and the nearby divertor surfaces. The new system uses a shuttered pinhole-protected pair of 90° off-axis 228 mm focal length aluminum parabolic mirrors, and two flat turning metal mirrors, to send light to a sapphire vacuum window 1.6 meters away, beyond which we have co-located telephoto lens-based infrared and visible cameras. The back-to-back off-axis parabolas serve to cancel out most aberrations, enabling the use of off-the-shelf commercial optics outside of the vessel. For the infrared, we use a 3-5 µm 1-megapixel FLIR SC8303HD camera and for the visible, a 5-megapixel CMOS PCO 5.5 edge camera. A short 1-m quartz pickoff fiber is used to send 200-1100 nm light to a compact spectrometer, also located in the same iron shield box as the cameras. The camera field of view covers the 700 mm length of the scraper, and includes locations monitored by thermocouples and Langmuir probes embedded in some of the scraper tiles. Predicted and actual optical test performances of the overall system are compared.
RESUMO
Wendelstein 7-X (W7-X) is the most advanced fusion experiment in the stellarator line and is aimed at proving that the stellarator concept is suitable for a fusion reactor. One of the most important issues for fusion reactors is the monitoring of plasma facing components when exposed to very high heat loads, through the use of visible and infrared (IR) cameras. In this paper, a new image processing system for the analysis of the strike lines on the inboard limiters from the first W7-X experimental campaign is presented. This system builds a model of the IR cameras through the use of spatial calibration techniques, helping to characterize the strike lines by using the information given by real spatial coordinates of each pixel. The characterization of the strike lines is made in terms of position, size, and shape, after projecting the camera image in a 2D grid which tries to preserve the curvilinear surface distances between points. The description of the strike-line shape is made by means of the Fourier Descriptors.
RESUMO
BACKGROUND: Thromboembolic events constitute a major health problem, despite the steadily expanding arsenal of antiplatelet drugs. Hence, there is still a need to optimize the antiplatelet therapy. OBJECTIVES: The aim of our study was to verify a hypothesis that there are no differences in platelet proteome between two groups of healthy people representing different acetylsalicylic acid (aspirin) responses as assessed by the liquid chromatography/mass spectrometry (LC/MS) technique. PATIENTS/METHODS: A total of 61 healthy volunteers were recruited for the study. Physical examination and blood collection were followed by platelet-rich plasma aggregation assays and platelet separation for proteomic LC/MS analysis. Arachidonic acid- (AA-) induced aggregation (in the presence of aspirin) allowed to divide study participants into two groups aspirin-resistant (AR) and aspirin-sensitive (AS) ones. Subsequently, platelet proteome was compared in groups using the LC/MS analysis. RESULTS: The LC/MS analysis of platelet proteome between groups revealed that out of all identified proteins, the only discriminatory protein, affecting aspirin responsiveness, is platelet carbonic anhydrase II (CA II). CONCLUSIONS: CA II is a platelet function modulator and should be taken into consideration as a cardiovascular event risk factor or therapeutic target.
Assuntos
Aspirina/farmacologia , Plaquetas/enzimologia , Anidrase Carbônica II/sangue , Adulto , Resistência a Medicamentos , Feminino , Humanos , MasculinoRESUMO
Wendelstein 7-X, a superconducting optimized stellarator built in Greifswald/Germany, started its first plasmas with the last closed flux surface (LCFS) defined by 5 uncooled graphite limiters in December 2015. At the end of the 10 weeks long experimental campaign (OP1.1) more than 20 independent diagnostic systems were in operation, allowing detailed studies of many interesting plasma phenomena. For example, fast neutral gas manometers supported by video cameras (including one fast-frame camera with frame rates of tens of kHz) as well as visible cameras with different interference filters, with field of views covering all ten half-modules of the stellarator, discovered a MARFE-like radiation zone on the inboard side of machine module 4. This structure is presumably triggered by an inadvertent plasma-wall interaction in module 4 resulting in a high impurity influx that terminates some discharges by radiation cooling. The main plasma parameters achieved in OP1.1 exceeded predicted values in discharges of a length reaching 6 s. Although OP1.1 is characterized by short pulses, many of the diagnostics are already designed for quasi-steady state operation of 30 min discharges heated at 10 MW of ECRH. An overview of diagnostic performance for OP1.1 is given, including some highlights from the physics campaigns.
RESUMO
A high-resolution imaging system, consisting of megapixel mid-IR and visible cameras along the same line of sight, has been prepared for the new W7-X stellarator and was operated during Operational Period 1.1 to view one of the five inboard graphite limiters. The radial line of sight, through a large diameter (184 mm clear aperture) uncoated sapphire window, couples a direct viewing 1344 × 784 pixel FLIR SC8303HD camera. A germanium beam-splitter sends visible light to a 1024 × 1024 pixel Allied Vision Technologies Prosilica GX1050 color camera. Both achieve sub-millimeter resolution on the 161 mm wide, inertially cooled, segmented graphite tiles. The IR and visible cameras are controlled via optical fibers over full Camera Link and dual GigE Ethernet (2 Gbit/s data rates) interfaces, respectively. While they are mounted outside the cryostat at a distance of 3.2 m from the limiter, they are close to a large magnetic trim coil and require soft iron shielding. We have taken IR data at 125 Hz to 1.25 kHz frame rates and seen that surface temperature increases in excess of 350 °C, especially on leading edges or defect hot spots. The IR camera sees heat-load stripe patterns on the limiter and has been used to infer limiter power fluxes (â¼1-4.5 MW/m2), during the ECRH heating phase. IR images have also been used calorimetrically between shots to measure equilibrated bulk tile temperature, and hence tile energy inputs (in the range of 30 kJ/tile with 0.6 MW, 6 s heating pulses). Small UFO's can be seen and tracked by the FLIR camera in some discharges. The calibrated visible color camera (100 Hz frame rate) has also been equipped with narrow band C-III and H-alpha filters, to compare with other diagnostics, and is used for absolute particle flux determination from the limiter surface. Sometimes, but not always, hot-spots in the IR are also seen to be bright in C-III light.
RESUMO
Interpretation of spectroscopic measurements in the edge region of high-temperature plasmas can be a challenge since line of sight integration effects make direct interpretation in terms of quantitative, local emission strengths often impossible. The EMC3-EIRENE code-a 3D fluid edge plasma and kinetic neutral gas transport code-is a suitable tool for full 3D reconstruction of such signals. A versatile synthetic diagnostic module has been developed recently which allows the realistic 3D setup of various plasma edge diagnostics to be captured. We highlight these capabilities with two examples for Wendelstein 7-X (W7-X): a visible camera for the analysis of recycling, and a coherent-imaging system for velocity measurements.
RESUMO
Wendelstein 7-X (W7-X) aims to demonstrate the reactor capability of the stellarator concept, by creating plasmas with pulse lengths of up to 30 min at a heating power of up to 10 MW. The divertor plasma facing components will see convective steady state heat flux densities of up to 10 MW/m(2). These high heat flux target elements are actively cooled and are covered with carbon fibre reinforced carbon (CFC) as plasma facing material. The CFC is bonded to the CuCrZr cooling structure. Over the life time of the experiment this interface may weaken and cracks can occur, greatly reducing the heat conduction between the CFC tile and the cooling structure. Therefore, there is not only the need to monitor the divertor to prevent damage by overheating but also the need to detect these fatigue failures of the interface. A method is presented for an early detection of fatigue failures of the interface layer, solely by using the information delivered by the IR-cameras monitoring the divertor. This was developed and validated through experiments made with high heat flux target elements prior to installation in W7-X.
RESUMO
In 2004 the European Commission and Member States initiated activities towards a harmonized approach for Human Biomonitoring surveys throughout Europe. The main objective was to sustain environmental health policy by building a coherent and sustainable framework and by increasing the comparability of data across countries. A pilot study to test common guidelines for setting up surveys was considered a key step in this process. Through a bottom-up approach that included all stakeholders, a joint study protocol was elaborated. From September 2011 till February 2012, 17 European countries collected data from 1844 mother-child pairs in the frame of DEMOnstration of a study to COordinate and Perform Human Biomonitoring on a European Scale (DEMOCOPHES).(1) Mercury in hair and urinary cadmium and cotinine were selected as biomarkers of exposure covered by sufficient analytical experience. Phthalate metabolites and Bisphenol A in urine were added to take into account increasing public and political awareness for emerging types of contaminants and to test less advanced markers/markers covered by less analytical experience. Extensive efforts towards chemo-analytical comparability were included. The pilot study showed that common approaches can be found in a context of considerable differences with respect to experience and expertize, socio-cultural background, economic situation and national priorities. It also evidenced that comparable Human Biomonitoring results can be obtained in such context. A European network was built, exchanging information, expertize and experiences, and providing training on all aspects of a survey. A key challenge was finding the right balance between a rigid structure allowing maximal comparability and a flexible approach increasing feasibility and capacity building. Next steps in European harmonization in Human Biomonitoring surveys include the establishment of a joint process for prioritization of substances to cover and biomarkers to develop, linking biomonitoring surveys with health examination surveys and with research, and coping with the diverse implementations of EU regulations and international guidelines with respect to ethics and privacy.
Assuntos
Saúde Ambiental/métodos , Monitoramento Ambiental/métodos , Cooperação Internacional , Desenvolvimento de Programas , Biomarcadores/análise , Interpretação Estatística de Dados , Exposição Ambiental/análise , Europa (Continente) , Estudos de Viabilidade , Humanos , Projetos PilotoRESUMO
In 2011 and 2012, the COPHES/DEMOCOPHES twin projects performed the first ever harmonized human biomonitoring survey in 17 European countries. In more than 1800 mother-child pairs, individual lifestyle data were collected and cadmium, cotinine and certain phthalate metabolites were measured in urine. Total mercury was determined in hair samples. While the main goal of the COPHES/DEMOCOPHES twin projects was to develop and test harmonized protocols and procedures, the goal of the current paper is to investigate whether the observed differences in biomarker values among the countries implementing DEMOCOPHES can be interpreted using information from external databases on environmental quality and lifestyle. In general, 13 countries having implemented DEMOCOPHES provided high-quality data from external sources that were relevant for interpretation purposes. However, some data were not available for reporting or were not in line with predefined specifications. Therefore, only part of the external information could be included in the statistical analyses. Nonetheless, there was a highly significant correlation between national levels of fish consumption and mercury in hair, the strength of antismoking legislation was significantly related to urinary cotinine levels, and we were able to show indications that also urinary cadmium levels were associated with environmental quality and food quality. These results again show the potential of biomonitoring data to provide added value for (the evaluation of) evidence-informed policy making.
Assuntos
Biomarcadores/análise , Exposição Ambiental/análise , Exposição Ambiental/estatística & dados numéricos , Poluentes Ambientais/análise , Adulto , Biomarcadores/urina , Cádmio/análise , Cádmio/urina , Criança , Cotinina/urina , Interpretação Estatística de Dados , Monitoramento Ambiental/métodos , Monitoramento Ambiental/estatística & dados numéricos , Poluentes Ambientais/urina , Europa (Continente) , Feminino , Regulamentação Governamental , Cabelo/química , Humanos , Mercúrio/análise , Mercúrio/urina , População Rural/estatística & dados numéricos , Alimentos Marinhos/estatística & dados numéricos , Fumar/legislação & jurisprudência , Fumar/urina , Inquéritos e Questionários/normas , População Urbana/estatística & dados numéricosRESUMO
An overview of the diagnostics which are essential for the first operational phase of Wendelstein 7-X and the set of diagnostics expected to be ready for operation at this time are presented. The ongoing investigations of how to cope with high levels of stray Electron Cyclotron Resonance Heating (ECRH) radiation in the ultraviolet (UV)/visible/infrared (IR) optical diagnostics are described.
RESUMO
The Note reports on experimental studies of ripple born fast electrons within the TORE-SUPRA facility, which were performed by means of a modified measuring head equipped with diamond detectors designed especially for recording the electron-induced Cherenkov radiation. There are presented signals produced by fast electrons in the TORE-SUPRA machine, which were recorded during two experimental campaigns performed in 2010. Shapes of these electron-induced signals are considerably different from those observed during the first measurements carried out by the prototype Cherenkov probe in 2008. An explanation of the observed differences is given.
RESUMO
The critical issues in the development of diagnostics, which need to work robust and reliable under quasi-steady state conditions for the discharge durations of 30 min and which cannot be maintained throughout the one week duration of each operation phase of the Wendelstein 7-X stellarator, are being discussed.
RESUMO
The aim of this study was to determine effects of genotype and selected environmental factors on colostrum production, intake, and efficiency in the cattle. The investigations were conducted on 67 dam-calf pairs. All cows were of Polish Holstein-Friesian breed, the Black-and-White variety (PHF-HO), whereas calves were sired by bulls of the following breeds: PHF-HO, Polish Holstein-Friesian of the Red-and-White variety (PHF-RW), Jersey (JE), Montbéliarde (MB) and Limousine (LI). The colostrum was collected from cows and offered to calves "from bucket" thrice a day. The amount of produced colostrum considerably exceeded the ability of its consumption by calves. Low share of HF genes in the cow, older cow's age and calving in the period from January to April appeared to be favorable factors for colostrum production. Calves born to cows with low HF gene share drank more colostrum than calves originating from cows with higher gene share of this breed. Crosses with JE drank the highest amount of the colostrum in relation to body weight, while MB-sired calves drank the highest amount in absolute terms. Colostrum intake was positively correlated with the dam's age. Furthermore, it was shown that in case of the first colostrum intake the most favorable period was from May to September, while in cases of total intake in the first day of life and mean intake in the first 5 days of life it was the period from January to April. Crosses with JE were characterized by extremely high use of colostrum per unit of body weight gain.
Assuntos
Bovinos/genética , Bovinos/fisiologia , Colostro/fisiologia , Ingestão de Alimentos/genética , Ingestão de Alimentos/fisiologia , Animais , Meio Ambiente , Feminino , MasculinoRESUMO
The status of the diagnostic developments for the quasistationary operable stellarator Wendelstein 7-X (maximum pulse length of 30 min at 10 MW ECRH heating at 140 GHz) will be reported on. Significant emphasis is being given to the issue of ECRH stray radiation shielding of in-vessel diagnostic components, which will be critical at high density operation requiring O2 and OXB heating.
RESUMO
Recent epidemiological data indicate that low environmental exposure to cadmium, as shown by cadmium body burden (Cd-U), is associated with renal dysfunction as well as an increased risk of cadmium-induced bone disorders. The present study was designed to assess the effects of low environmental cadmium exposure, at the level sufficient to induce kidney damage, on bone metabolism and mineral density (BMD). The project was conducted in the area contaminated with cadmium, nearby a zinc smelter located in the region of Poland where heavy industry prevails. The study population comprised 170 women (mean age=39.7; 18-70 years) and 100 men (mean age=31.9; 18-76 years). Urinary and blood cadmium and the markers of renal tubular dysfunction (beta(2)M-U RBP, NAG), glomerular dysfunction (Alb-U and beta(2)M-S) and bone metabolism markers (BAP-S, CTX-S) as well as forearm BMD, were measured. The results of this study based on simple dose-effect analysis showed the relationship between increasing cadmium concentrations and an increased excretion of renal dysfunction markers and decreasing bone density. However, the results of the multivariate analysis did not indicate the association between exposure to cadmium and decrease in bone density. They showed that the most important factors that have impact on bone density are body weight and age in the female subjects and body weight and calcium excretion in males. Our investigation revealed that the excretion of low molecular weight proteins occurred at a lower level of cadmium exposure than the possible loss of bone mass. It seems that renal tubular markers are the most sensitive and significant indicators of early health effects of cadmium intoxication in the general population. The correlation of urinary cadmium concentration with markers of kidney dysfunction was observed in the absence of significant correlations with bone effects. Our findings did not indicate any effects of environmental cadmium exposure on bone density.
Assuntos
Densidade Óssea/efeitos dos fármacos , Cádmio/toxicidade , Exposição Ambiental/análise , Poluentes Ambientais/toxicidade , Adolescente , Adulto , Idoso , Osso e Ossos/metabolismo , Cádmio/sangue , Cádmio/urina , Exposição Ambiental/efeitos adversos , Poluentes Ambientais/sangue , Poluentes Ambientais/urina , Feminino , Humanos , Nefropatias/induzido quimicamente , Nefropatias/metabolismo , Masculino , Pessoa de Meia-Idade , Testes de Toxicidade , Adulto JovemRESUMO
Good alignment of the magnetic field line pitch angle with the mode structure of an external resonant magnetic perturbation (RMP) field is shown to induce modulation of the pedestal electron pressure p(e) in high confinement high rotation plasmas at the DIII-D tokamak with a shape similar to ITER, the next step tokamak experiment. This is caused by an edge safety factor q95 resonant enhancement of the thermal transport, while in contrast, the RMP induced particle pump out does not show a significant resonance. The measured p(e) reduction correlates to an increase in the modeled stochastic layer width during pitch angle variations matching results from resistive low rotation plasmas at the TEXTOR tokamak. These findings suggest a field line pitch angle resonant formation of a stochastic magnetic edge layer as an explanation for the q95 resonant character of type-I edge localized mode suppression by RMPs.
RESUMO
Migraine headache is triggered by and associated with a variety of hormonal, emotional, nutritional and physiological changes. The perception of migraine headache is formed when nociceptive signals originating in the meninges are conveyed to the somatosensory cortex through the trigeminal ganglion, medullary dorsal horn and thalamus. We propose that different migraine triggers activate a wide variety of brain areas that impinge on parasympathetic neurons innervating the meninges. According to this hypothesis, migraine triggers such as stress activate multiple hypothalamic, limbic and cortical areas, all of which contain neurons that project to the preganglionic parasympathetic neurons in the superior salivatory nucleus (SSN). The SSN, in turn, activates postganglionic parasympathetic neurons in the sphenopalatine ganglion, resulting in vasodilation and local release of inflammatory molecules that activate meningeal nociceptors. We propose that trigeminovascular projections from the medullary dorsal horn to selective areas in the midbrain, hypothalamus, amygdala and basal forebrain are functionally positioned to produce migraine symptoms such as irritability, loss of appetite, fatigue, depression and the quest for solitude. The network of bidirectional trafficking by which the trigeminovascular system can activate the same brain areas that have triggered its own activity in the first place provides an attractive mechanism of perpetual feedback that drives a migraine attack for many hours and even days.