Large-Area Fabrication of Porous Graphene Networks on Carbon Fabric via Millisecond Photothermal Processing of Polyaniline for Supercapacitors.

Supercapacitors demonstrate promising potential for flexible, multi-functional energy storage devices; however, their widespread adoption is confronted by fabrication challenges. To access a combination of desirable device qualities such as flexibility, lightweight, structural stability, and enhanced electrochemical performance, carbon fiber (CF) can be utilized as a current collector, alongside graphene as an electrochemically active material. Yet achieving a cost-effective, large-scale graphene production, particularly on CF, remains challenging. Here, a rapid (<1 min) photothermal approach is developed for the large-scale production of graphene directly onto CF, utilizing polyaniline (PANI) as a polymer precursor. The in situ electropolymerization of PANI on CF facilitates its rapid synthesis on large areas, followed by conversion into graphene networks, enabling the binder-free fabrication of supercapacitor devices. These devices exhibit an areal capacitance of 180 mF cm-2 (at 2 mA cm-2 in 1 m H2SO4), an order of magnitude higher than other fabric-based devices. Moreover, the devised photothermal strategy allows for one-step preparation of supercapacitor devices on areas exceeding 100 cm-2, yielding an absolute areal capacitance of 4.5 F. The proportional increase in capacitance with device area facilitates scaling and indicates the commercial viability of this approach for low-cost, energy-efficient, and high-throughput production of lightweight, high-performance graphene-based multi-functional supercapacitor devices.

Mesoporous Single Atom-Cluster Fe-N/C Oxygen Evolution Electrocatalysts Synthesized with Bottlebrush Block Copolymer-Templated Rapid Thermal Annealing.

Current electrocatalysts for oxygen evolution reaction (OER) are either expensive (such as IrO2, RuO2) or/and exhibit high overpotential as well as sluggish kinetics. This article reports mesoporous earth-abundant iron (Fe)-nitrogen (N) doped carbon electrocatalysts with iron clusters and closely surrounding Fe-N4 active sites. Unique to this work is that the mechanically stable mesoporous carbon-matrix structure (79 nm in pore size) with well-dispersed nitrogen-coordinated Fe single atom-cluster is synthesized via rapid thermal annealing (RTA) within only minutes using a self-assembled bottlebrush block copolymer (BBCP) melamine-formaldehyde resin composite template. The resulting porous structure and domain size can be tuned with the degree of polymerization of the BBCP backbone, which increases the electrochemically active surface area and improves electron transfer and mass transport for an effective OER process. The optimized electrocatalyst shows a required potential of 1.48 V (versus RHE) to obtain the current density of 10 mA/cm2 in 1 M KOH aqueous electrolyte and a small Tafel slope of 55 mV/decade at a given overpotential of 250 mV, which is significantly lower than recently reported earth-abundant electrocatalysts. Importantly, the Fe single-atom nitrogen coordination environment facilitates the surface reconstruction into a highly active oxyhydroxide under OER conditions, as revealed by X-ray photoelectron spectroscopy and in situ Raman spectroscopy, while the atomic clusters boost the single atoms reactive sites to prevent demetalation during the OER process. Density functional theory (DFT) calculations support that the iron nitrogen environment and reconstructed oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced. This work has opened a new avenue for simple, rapid synthesis of inexpensive, earth-abundant, tailorable, mechanically stable, mesoporous carbon-coordinated single-atom electrocatalysts that can be used for renewable energy production.

Defect Healing in Graphene via Rapid Thermal Annealing with Polymeric "Nanobandage".

Overcoming throughput challenges in current graphene defect healing processes, such as conventional thermal annealing, is crucial for realizing post-silicon device fabrication. Herein, a new time- and energy-efficient method for defect healing in graphene is reported, utilizing polymer-assisted rapid thermal annealing (RTA). In this method, a nitrogen-rich, polymeric "nanobandage" is coated directly onto graphene and processed via RTA at 800 °C for 15 s. During this process, the polymer matrix is cleanly degraded, while nitrogen released from the nanobandage can diffuse into graphene, forming nitrogen-doped healed graphene. To study the influence of pre-existing defects on graphene healing, lattice defects are purposefully introduced via electron beam irradiation and investigated by Raman microscopy. X-ray photoelectron spectroscopy reveals successful healing of graphene, observing a maximum doping level of 3 atomic nitrogen % in nanobandage-treated samples from a baseline of 0-1 atomic % in non-nanobandage treated samples. Electrical transport measurements further indicate that the nanobandage treatment recovers the conductivity of scanning electron microscope-treated defective graphene at ≈85%. The reported polymer-assisted RTA defect healing method shows promise for healing other 2D materials with other dopants by simply changing the chemistry of the polymeric nanobandage.

Mesoscale Polymer Surfactants: Photolithographic Production and Localization at Droplet Interfaces.

Stabilization of fluid droplets, classically as oil-in-water or water-in-oil emulsions, is typically conducted using molecular surfactants or small particulates that localize at oil-water interfaces. In this paper, we describe a method whereby thin polymer films are converted photolithographically to ribbon-like mesoscale objects, which, in turn, adsorb to fluid interfaces where they extend as appendages, or arms, from the droplet surface. These "mesoscale polymer surfactants", or MPSs, were prepared from thin polymer films containing reactive functional moieties, including coumarin for photo-cross-linking, triphenylsulfonium for photoacid generation, and tert-butyl ester for solubility switching. The resultant MPSs, prepared initially on Si substrates, were released into water to reveal an exquisite shape sensitivity (forming straight, bent, or helical structures) and affinity for droplet interfaces based on their preparation conditions and the properties of the surrounding liquid. Notably, the lithographic techniques employed were amenable to differentiating the wettability of MPS segments, affording access to diblock-like MPSs which adhered to dispersed droplets via their hydrophobic segments, allowing their hydrophilic segments to extend into the continuous phase.

Stabilization of Three-Particle Excitations in Monolayer MoS2 by Fluorinated Methacrylate Polymers.

While extrinsic factors, such as substrates and chemical doping, are known to strongly influence visible photoemission from monolayer MoS2, key fundamental knowledge for p-type polymeric dopants is lacking. We investigated perturbations to the electronic environment of 2D MoS2 using fluorinated polymer coatings and specifically studied stabilization of three-particle states by monitoring changes in intensities and emission maxima of three-particle and two-particle emissions. We calculated changes in carrier density and trion binding energy, the latter having an additional contribution from MoS2 polarization by the polymer. Polarization is further suggested by Kelvin probe force microscopy (KPFM) measurements of large Fermi level shifts. Changes similar in magnitude, but opposite in sign, were observed in 2D MoS2 coated with an analogous nonfluorinated polymer. These findings highlight the important interplay between electron exchange and electrostatic interactions at the interface between polymers and transition metal dichalcogenides (TMDCs), which govern fundamental electronic properties relevant to next-generation devices.

Lack of consensus identifies important areas for future clinical research: Advanced Prostate Cancer Consensus Conference (APCCC) 2019 findings.

BACKGROUND: Innovations in treatments, imaging and molecular characterisation have improved outcomes for people with advanced prostate cancer; however, many aspects of clinical management are devoid of high-level evidence. At the Advanced Prostate Cancer Consensus Conference (APCCC) 2019, many of these topics were addressed, and consensus was not always reached. The results from clinical trials will most reliably plus the gaps. METHODS: An invited panel of 57 experts voted on 123 multiple-choice questions on clinical management at APCCC 2019. No consensus was reached on 88 (71.5%) questions defined as <75% of panellists voting for the same answer option. We reviewed clinicaltrials.gov to identify relevant ongoing phase III trials in these areas of non-consensus. RESULTS: A number of ongoing phase III trials were identified that are relevant to these non-consensus issues. However, many non-consensus issues appear not to be addressed by current clinical trials. Of note, no phase III but only phase II trials were identified, investigating side effects of hormonal treatments and their management. CONCLUSIONS: Lack of consensus almost invariably indicates gaps in existing evidence. The high percentage of questions lacking consensus at APCCC 2019 highlights the complexity of advanced prostate cancer care and the need for robust, clinically relevant trials that can fill current gaps with high-level evidence. Our review of these areas of non-consensus and ongoing trials provides a useful summary, indicating areas in which future consensus may soon be reached. This review may facilitate academic investigators to identify and prioritise topics for future research.

Large-Pore Ordered Mesoporous Turbostratic Carbon Films Prepared Using Rapid Thermal Annealing for High-Performance Micro-pseudocapacitors.

Carbonization by rapid thermal annealing (RTA) of precursor films structured by a brush block copolymer-mediated self-assembly enabled the preparation of large-pore (40 nm) ordered mesoporous carbon (MPC)-based micro-supercapacitors within minutes. The large pore size of the fabricated films facilitates both rapid electrolyte diffusion for carbon-based electric double-layer capacitors and conformal deposition of V2O5 without pore blockage for pseudocapacitors. The pores were templated using bottlebrush block copolymers (BBCPs) via cooperative assembly of phenol-formaldehyde resin to produce microphase-segregated carbon precursor films on a variety of substrates. Ultrafast RTA processing (∼50 °C/s) at elevated temperatures (up to 1000 °C) then generated stable, conductive, turbostratic MPC films, resolving a significant bottleneck in rapid fabrication. MPC prepared on stainless steel at 900 °C demonstrated exceptionally high areal and volumetric capacitances of 6.3 mF/cm2 and 126 F/cm3 (at 0.8 mA/cm2 using 6 M KOH as the electrolyte), respectively, and 91% capacitance retention after 10,000 galvanostatic charge/discharge cycles. Post-RTA conformal V2O5 deposition yielded pseudocapacitors with 10-fold increase in energy density (20 µW h cm-2 µm-1) without adversely affecting the high power density (450 µW cm-2 µm-1). The use of RTA coupled with BBCP templating opens avenues for scalable, rapid fabrication of high-performance carbon-based micro-pseudocapacitors.

Polarization-Driven Asymmetric Electronic Response of Monolayer Graphene to Polymer Zwitterions Probed from Both Sides.

We investigated the nature of graphene surface doping by zwitterionic polymers and the implications of weak in-plane and strong through-plane screening using a novel sample geometry that allows direct access to either the graphene or the polymer side of a graphene/polymer interface. Using both Kelvin probe and electrostatic force microscopies, we observed a significant upshift in the Fermi level in graphene of ∼260 meV that was dominated by a change in polarizability rather than pure charge transfer with the organic overlayer. This physical picture is supported by density functional theory (DFT) calculations, which describe a redistribution of charge in graphene in response to the dipoles of the adsorbed zwitterionic moieties, analogous to a local DC Stark effect. Strong metallic-like screening of the adsorbed dipoles was observed by employing an inverted geometry, an effect identified by DFT to arise from a strongly asymmetric redistribution of charge confined to the side of graphene proximal to the zwitterion dipoles. Transport measurements confirm n-type doping with no significant impact on carrier mobility, thus demonstrating a route to desirable electronic properties in devices that combine graphene with lithographically patterned polymers.

Zinc uptake and HMA4 activity are required for micro- and macroelement balance in tobacco (Nicotiana tabacum).

The pleiotropic effects of zinc deficiency on ion homeostasis have already been described in several plants. Tobacco (Nicotiana tabacum) heavy metal ATPases HMA4.1 and HMA4.2 are involved in zinc and cadmium root-to-shoot translocation. In previous research, we have shown that N. tabacum HMA4 RNAi plants and HMA4 double-nonsense mutants exhibit strongly reduced zinc and cadmium levels in leaves as well as stunted growth. In this study, the ionome and transcriptome of these lines were investigated to better characterize the effect of reduced zinc levels and to understand the impaired growth phenotype. We found that, under standard greenhouse fertilization rates, these lines accumulated up to 4- to 6-fold more phosphorus, iron, manganese, and copper than their respective controls. Under field conditions, HMA4 double-mutant plants also exhibited similar accumulation phenotypes, albeit to a lower extent. In both HMA4 RNAi plants and HMA4 mutants, transcription analysis showed a local zinc-deficiency response in leaves as well as an FIT1-mediated iron-deficiency response in roots, likely contributing to iron and manganese uptake at the root level. A phosphate-starvation response involving HHO2 was also observed in HMA4-impaired plant leaves. The high level of phosphorus observed in HMA4-impaired plants is correlated with leaf swelling and necrosis. The upregulation of aquaporin genes is in line with cellular water influx and the observed leaf swelling phenotype. These results highlight the involvement of HMA4 in zinc homeostasis and related regulatory processes that balance the micro- and macroelements in above-ground organs.

Floristic biodiversity, biogeographical significance, and importance of Morocco's Arganeraie Biosphere Reserve.

The coastal and subcoastal areas of west-central Morocco (Safi to Draa River, the Souss Valley, and the southern part of the western High Atlas and northern and southern slopes of the western Anti-Atlas) are characterized by typical Infra-Mediterranean vegetation ranking them amongst the important of the remarkable borderlands of North Africa. The flora is determined by complex historical and environmental factors occurring since the Tertiary period. The originality of this sector is due to the presence of the argan tree (Argania spinosa (L.) Skeels), Moroccan gum (Acacia gummifera Willd), olive trees (Olea europaea L. subsp. maroccana (Greuter & Burdet) P. Vargas & al.), a thermophilic flora adapted to an arid climate with several endemic species. This flora constitutes the final barrier against the desert and is of environmental and socioeconomical interest. Leaves and fruits provide forage material, while wood is used for fuel. Argan fruits are collected for their oily constitutes and for nutritional, cosmetic, and medicinal properties. Additionally, many species of Argan ecosystems are used in medicine and cosmetics. Recognizing its ecological value and local economic importance, the Argan region was declared a UNESCO Biosphere Reserve in 1998. Despite their biogeographical, historical, and socioeconomic value, vegetation structures in west-central Morocco are vulnerable and threatened by human activities. They exhibit high levels of degradation due to increasing clearance, overgrazing, and overexploitation. The area requires high conservation priority and sustainable management strategies for key species and genetic diversity.

Electronic Tuning of Monolayer Graphene with Polymeric "Zwitterists".

Work function engineering of two-dimensional (2D) materials by application of polymer coatings represents a research thrust that promises to enhance the performance of electronic devices. While polymer zwitterions have been demonstrated to significantly modify the work function of both metal electrodes and 2D materials due to their dipole-rich structure, the impact of zwitterion chemical structure on work function modulation is not well understood. To address this knowledge gap, we synthesized a series of sulfobetaine-based zwitterionic random copolymers with variable substituents and used them in lithographic patterning for the preparation of negative-tone resists (i.e., "zwitterists") on monolayer graphene. Ultraviolet photoelectron spectroscopy indicated a significant work function reduction, as high as 1.5 eV, induced by all polymer zwitterions when applied as ultrathin films (<10 nm) on monolayer graphene. Of the polymers studied, the piperidinyl-substituted version, produced the largest dipole normal to the graphene sheet, thereby inducing the maximum work function reduction. Density functional theory calculations probed the influence of zwitterion composition on dipole orientation, while lithographic patterning allowed for evaluation of surface potential contrast via Kelvin probe force microscopy. Overall, this polymer "zwitterist" design holds promise for fine-tuning 2D materials electronics with spatial control based on the chemistry of the polymer coating and the dimensions of the lithographic patterning.

Scattering of Co-Current Surface Waves on an Analogue Black Hole.

We report on what is to our knowledge the first scattering experiment of surface waves on an accelerating transcritical flow, which in the analogue gravity context is described by an effective spacetime with a black-hole horizon. This spacetime has been probed by an incident co-current wave, which partially scatters into an outgoing countercurrent wave on each side of the horizon. The measured scattering amplitudes are compatible with the predictions of the hydrodynamical theory, where the kinematical description in terms of the effective metric is exact.

Management of Patients with Advanced Prostate Cancer: Report of the Advanced Prostate Cancer Consensus Conference 2019.

BACKGROUND: Innovations in treatments, imaging, and molecular characterisation in advanced prostate cancer have improved outcomes, but there are still many aspects of management that lack high-level evidence to inform clinical practice. The Advanced Prostate Cancer Consensus Conference (APCCC) 2019 addressed some of these topics to supplement guidelines that are based on level 1 evidence. OBJECTIVE: To present the results from the APCCC 2019. DESIGN, SETTING, AND PARTICIPANTS: Similar to prior conferences, experts identified 10 important areas of controversy regarding the management of advanced prostate cancer: locally advanced disease, biochemical recurrence after local therapy, treating the primary tumour in the metastatic setting, metastatic hormone-sensitive/naïve prostate cancer, nonmetastatic castration-resistant prostate cancer, metastatic castration-resistant prostate cancer, bone health and bone metastases, molecular characterisation of tissue and blood, inter- and intrapatient heterogeneity, and adverse effects of hormonal therapy and their management. A panel of 72 international prostate cancer experts developed the programme and the consensus questions. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: The panel voted publicly but anonymously on 123 predefined questions, which were developed by both voting and nonvoting panel members prior to the conference following a modified Delphi process. RESULTS AND LIMITATIONS: Panellists voted based on their opinions rather than a standard literature review or formal meta-analysis. The answer options for the consensus questions had varying degrees of support by the panel, as reflected in this article and the detailed voting results reported in the Supplementary material. CONCLUSIONS: These voting results from a panel of prostate cancer experts can help clinicians and patients navigate controversial areas of advanced prostate management for which high-level evidence is sparse. However, diagnostic and treatment decisions should always be individualised based on patient-specific factors, such as disease extent and location, prior lines of therapy, comorbidities, and treatment preferences, together with current and emerging clinical evidence and logistic and economic constraints. Clinical trial enrolment for men with advanced prostate cancer should be strongly encouraged. Importantly, APCCC 2019 once again identified important questions that merit assessment in specifically designed trials. PATIENT SUMMARY: The Advanced Prostate Cancer Consensus Conference provides a forum to discuss and debate current diagnostic and treatment options for patients with advanced prostate cancer. The conference, which has been held three times since 2015, aims to share the knowledge of world experts in prostate cancer management with health care providers worldwide. At the end of the conference, an expert panel discusses and votes on predefined consensus questions that target the most clinically relevant areas of advanced prostate cancer treatment. The results of the voting provide a practical guide to help clinicians discuss therapeutic options with patients as part of shared and multidisciplinary decision making.

Management of Patients with Advanced Prostate Cancer: The Report of the Advanced Prostate Cancer Consensus Conference APCCC 2017.

BACKGROUND: In advanced prostate cancer (APC), successful drug development as well as advances in imaging and molecular characterisation have resulted in multiple areas where there is lack of evidence or low level of evidence. The Advanced Prostate Cancer Consensus Conference (APCCC) 2017 addressed some of these topics. OBJECTIVE: To present the report of APCCC 2017. DESIGN, SETTING, AND PARTICIPANTS: Ten important areas of controversy in APC management were identified: high-risk localised and locally advanced prostate cancer; "oligometastatic" prostate cancer; castration-naïve and castration-resistant prostate cancer; the role of imaging in APC; osteoclast-targeted therapy; molecular characterisation of blood and tissue; genetic counselling/testing; side effects of systemic treatment(s); global access to prostate cancer drugs. A panel of 60 international prostate cancer experts developed the program and the consensus questions. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: The panel voted publicly but anonymously on 150 predefined questions, which have been developed following a modified Delphi process. RESULTS AND LIMITATIONS: Voting is based on panellist opinion, and thus is not based on a standard literature review or meta-analysis. The outcomes of the voting had varying degrees of support, as reflected in the wording of this article, as well as in the detailed voting results recorded in Supplementary data. CONCLUSIONS: The presented expert voting results can be used for support in areas of management of men with APC where there is no high-level evidence, but individualised treatment decisions should as always be based on all of the data available, including disease extent and location, prior therapies regardless of type, host factors including comorbidities, as well as patient preferences, current and emerging evidence, and logistical and economic constraints. Inclusion of men with APC in clinical trials should be strongly encouraged. Importantly, APCCC 2017 again identified important areas in need of trials specifically designed to address them. PATIENT SUMMARY: The second Advanced Prostate Cancer Consensus Conference APCCC 2017 did provide a forum for discussion and debates on current treatment options for men with advanced prostate cancer. The aim of the conference is to bring the expertise of world experts to care givers around the world who see less patients with prostate cancer. The conference concluded with a discussion and voting of the expert panel on predefined consensus questions, targeting areas of primary clinical relevance. The results of these expert opinion votes are embedded in the clinical context of current treatment of men with advanced prostate cancer and provide a practical guide to clinicians to assist in the discussions with men with prostate cancer as part of a shared and multidisciplinary decision-making process.

Impairing both HMA4 homeologs is required for cadmium reduction in tobacco.

In tobacco, the heavy metal P1B-ATPases HMA4.1 and HMA4.2 function in root-to-shoot zinc and cadmium transport. We present greenhouse and field data that dissect the possibilities to impact the two homeologous genes in order to define the best strategy for leaf cadmium reduction. In a first step, both genes were silenced using an RNAi approach leading to >90% reduction of leaf cadmium content. To modulate HMA4 function more precisely, mutant HMA4.1 and HMA4.2 alleles of a Targeting Induced Local Lesions IN Genomes (TILLING) population were combined. As observed with RNAi plants, knockout of both homeologs decreased cadmium root-to-shoot transfer by >90%. Analysis of plants with segregating null and wild-type alleles of both homeologs showed that one functional HMA4 allele is sufficient to maintain wild-type cadmium levels. Plant development was affected in HMA4 RNAi and double knockout plants that included retarded growth, necrotic lesions, altered leaf morphology and increased water content. The combination of complete functional loss (nonsense mutation) in one homeologous HMA4 gene and the functional reduction in the other HMA4 gene (missense mutation) is proposed as strategy to limit cadmium leaf accumulation without developmental effects.