Biodegradable Polymeric Injectable Implants for Long-Term Delivery of Contraceptive Drugs.

Development of injectable, long-lasting, contraceptive drug delivery formulations and implants are highly desired to avoid unplanned pregnancies while improving patient compliance and reducing adverse side effects and treatment costs. The present study reports on the fabrication and characterization of two levonorgestrel (LNG) microsphere injectable formulations. Poly(ε-caprolactone) (PCL) with 12.5% and 24% (w/w) LNG were fabricated into microspheres, measuring 300±125 µm, via the oil-in-water (o/w) emulsion solvent evaporation technique. Formulations showed sustained drug release up to 120 days. FTIR, XRD, DSC, and TGA confirmed the absence of LNG chemical interaction with PCL as well as its molecular level distribution. The in vitro release of LNG was calculated to be Fickian diffusion controlled and properly characterized. The inclusion of multiple elevated release temperatures allowed for the application of the Arrhenius model to calculate drug release constants and representative sampling intervals, demonstrating the use of elevated temperatures for accelerated-time drug release studies.

Engineered stem cell niche matrices for rotator cuff tendon regenerative engineering.

Rotator cuff (RC) tears represent a large proportion of musculoskeletal injuries attended to at the clinic and thereby make RC repair surgeries one of the most widely performed musculoskeletal procedures. Despite the high incidence rate of RC tears, operative treatments have provided minimal functional gains and suffer from high re-tear rates. The hypocellular nature of tendon tissue poses a limited capacity for regeneration. In recent years, great strides have been made in the area of tendonogenesis and differentiation towards tendon cells due to a greater understanding of the tendon stem cell niche, development of advanced materials, improved scaffold fabrication techniques, and delineation of the phenotype development process. Though in vitro models for tendonogenesis have shown promising results, in vivo models have been less successful. The present work investigates structured matrices mimicking the tendon microenvironment as cell delivery vehicles in a rat RC tear model. RC injuries augmented with a matrix delivering rat mesenchymal stem cells (rMSCs) showed enhanced regeneration over suture repair alone or repair with augmentation, at 6 and 12-weeks post-surgery. The local delivery of rMSCs led to increased mechanical properties and improved tissue morphology. We hypothesize that the mesenchymal stem cells function to modulate the local immune and bioactivity environment through autocrine/paracrine and/or cell homing mechanisms. This study provides evidence for improved tendon healing with biomimetic matrices and delivered MSCs with the potential for translation to larger, clinical animal models. The enhanced regenerative healing response with stem cell delivering biomimetic matrices may represent a new treatment paradigm for massive RC tendon tears.

Poly(lactic acid) for delivery of bioactive macromolecules.

Therapeutic biomolecules often require frequent administration and supramolecular dosing to achieve therapeutic efficiencies and direct infusion into treatment or defect sites results in inadequate physiological response and at times severe side effects or mis-targeting. Delivery systems serve several purposes such as increased circulatory time, increased biomolecule half-life, and incorporation of new innovations can enable highly specific cell targeting and improved cell and nucleus permeability. Poly(lactic acid) (PLA) has become a "material of choice" due to wide availability, reproducible synthetic route, customization, versatility, biodegradability and biocompatibility. Furthermore, PLA is amenable to a variety of fabrication methodologies and chemistries allowing an expansive library correlating physio-chemical properties, characteristics, and applications. This article discusses challenges to biomolecule delivery, and classical approaches of PLA based biomolecule delivery and targeting strategies under development and in trials.

Gelatin Nanofiber Matrices Derived from Schiff Base Derivative for Tissue Engineering Applications.

Electrospinning of water-soluble polymers and retaining their mechanical strength and bioactivity remain challenging. Volatile organic solvent soluble polymers and their derivatives are preferred for fabricating electrospun nanofibers. We report the synthesis and characterization of 2-nitrobenzyl-gelatin (N-Gelatin)--a novel gelatin Schiff base derivative--and the resulting electrospun nanofiber matrices. The 2-nitrobenzyl group is a photoactivatable-caged compound and can be cleaved from the gelatin nanofiber matrices following UV exposure. Such hydrophobic modification allowed the fabrication of gelatin and blend nanofibers with poly(caprolactone) (PCL) having significantly improved tensile properties. Neat gelatin and their PCL blend nanofiber matrices showed a modulus of 9.08 ± 1.5 MPa and 27.61 ± 4.3 MPa, respectively while the modified gelatin and their blends showed 15.63 ± 2.8 MPa and 24.47 ± 8.7 MPa, respectively. The characteristic infrared spectroscopy band for gelatin Schiff base derivative at 1560 cm(-1) disappeared following exposure to UV light indicating the regeneration of free NH2 group and gelatin. These nanofiber matrices supported cell attachment and proliferation with a well spread morphology as evidenced through cell proliferation assay and microscopic techniques. Modified gelatin fiber matrices showed a 73% enhanced cell attachment and proliferation rate compared to pure gelatin. This polymer modification methodology may offer a promising way to fabricate electrospun nanofiber matrices using a variety of proteins and peptides without loss of bioactivity and mechanical strength.

Regenerative Engineering and Bionic Limbs.

Amputations of the upper extremity are severely debilitating, current treatments support very basic limb movement, and patients undergo extensive physiotherapy and psychological counselling. There is no prosthesis that allows the amputees near-normal function. With increasing number of amputees due to injuries sustained in accidents, natural calamities and international conflicts, there is a growing requirement for novel strategies and new discoveries. Advances have been made in technological, material and in prosthesis integration where researchers are now exploring artificial prosthesis that integrate with the residual tissues and function based on signal impulses received from the residual nerves. Efforts are focused on challenging experts in different disciplines to integrate ideas and technologies to allow for the regeneration of injured tissues, recording on tissue signals and feed-back to facilitate responsive movements and gradations of muscle force. A fully functional replacement and regenerative or integrated prosthesis will rely on interface of biological process with robotic systems to allow individual control of movement such as at the elbow, forearm, digits and thumb in the upper extremity. Regenerative engineering focused on the regeneration of complex tissue and organ systems will be realized by the cross-fertilization of advances over the past thirty years in the fields of tissue engineering, nanotechnology, stem cell science, and developmental biology. The convergence of toolboxes crated within each discipline will allow interdisciplinary teams from engineering, science, and medicine to realize new strategies, mergers of disparate technologies, such as biophysics, smart bionics, and the healing power of the mind. Tackling the clinical challenges, interfacing the biological process with bionic technologies, engineering biological control of the electronic systems, and feed-back will be the important goals in regenerative engineering over the next two decades.

Micro- and nanofabrication of chitosan structures for regenerative engineering.

Repair and regeneration of human tissues and organs using biomaterials, cells and/or growth factors is the ultimate goal of tissue engineers. One of the grand challenges in this field is to closely mimic the structures and properties of native tissues. Regenerative engineering-the convergence of tissue engineering with advanced materials science, stem cell science, and developmental biology-represents the next valuable tool to overcome the challenges. This article reviews the recent progress in developing advanced chitosan structures using various fabrication techniques. These chitosan structures, together with stem cells and functional biomolecules, may provide a robust platform to gain insight into cell-biomaterial interactions and may function as excellent artificial extracellular matrices to regenerate complex human tissues and biological systems.

Cellulose and collagen derived micro-nano structured scaffolds for bone tissue engineering.

Scaffold based bone tissue engineering (BTE) has made great progress in regenerating lost bone tissue. Materials of natural and synthetic origin have been used for scaffold fabrication. Scaffolds derived from natural polymers offer greater bioactivity and biocompatibility with mammalian tissues to favor tissue healing, due to their similarity to native extracellular matrix (ECM) components. Often it is a challenge to fabricate natural polymer based scaffolds for BTE applications without compromising their bioactivity, while maintaining adequate mechanical properties. In this work, we report the fabrication and characterization of cellulose and collagen based micro-nano structured scaffolds using human osteoblasts (HOB) for BTE applications. These porous micro-nano structured scaffolds (average pore diameter 190 +/- 10 microm) exhibited mechanical properties in the mid range of human trabecular bone (compressive modulus 266.75 +/- 33.22 MPa and strength 12.15 3 +/- 2.23 MPa). These scaffolds supported the greater adhesion and phenotype maintenance of cultured HOB as reflected by higher levels of osteogenic enzyme alkaline phosphatase and mineral deposition compared to control polyester micro-nano structured scaffolds of identical pore properties. These natural polymer based micro-nano structured scaffolds may serve as alternatives to polyester based scaffolds for BTE applications.

Osteoinductive small molecules: growth factor alternatives for bone tissue engineering.

Tissue engineering aims to repair, restore, and regenerate lost or damaged tissues by using biomaterials, cells, mechanical forces and factors (chemical and biological) alone or in combination. Growth factors are routinely used in the tissue engineering approach to expedite the process of regeneration. The growth factor approach has been hampered by several complications including high dose requirements, lower half-life, protein instability, higher costs and undesired side effects. Recently a variety of alternative small molecules of both natural and synthetic origin have been explored as alternatives to growth factors for tissue regeneration applications. Small molecules are simple biochemical components that elicit certain cellular responses through signaling cascades. Small molecules present a viable alternative to biological factors. Small molecule strategies can reduce various side effects, maintain bioactivity in a biological environment and minimize cost issues associated with complex biological growth factors. This manuscript focuses on three-osteoinductive small molecules, namely melatonin, resveratrol (from natural sources) and purmorphamine (synthetically designed) as inducers of bone formation and osteogenic differentiation of stem cells. Efforts have been made to summarize possible biological pathways involved in the action of each of these drugs. Melatonin is known to affect Mitogen Activated Protein (MAP) kinase, Bone morphogenic protein (BMP) and canonical wnt signaling. Resveratrol is known to activate cascades involving Wnt and NAD-dependent deacetylase sirtuin-1 (Sirt1). Purmorphamine is a Hedgehog (Hh) pathway agonist as it acts on Smoothened (Smo) receptors. These mechanisms and the way they are affected by the respective small molecules will also be discussed in the manuscript.

Polyphosphazene functionalized polyester fiber matrices for tendon tissue engineering: in vitro evaluation with human mesenchymal stem cells.

Poly[(ethyl alanato)(1)(p-methyl phenoxy)(1)] phosphazene (PNEA-mPh) was used to modify the surface of electrospun poly(ε-caprolactone) (PCL) nanofiber matrices having an average fiber diameter of 3000 ± 1700 nm for the purpose of tendon tissue engineering and augmentation. This study reports the effect of polyphosphazene surface functionalization on human mesenchymal stem cell (hMSC) adhesion, cell-construct infiltration, proliferation and tendon differentiation, as well as long term cellular construct mechanical properties. PCL fiber matrices functionalized with PNEA-mPh acquired a rougher surface morphology and led to enhanced cell adhesion as well as superior cell-construct infiltration when compared to smooth PCL fiber matrices. Long-term in vitro hMSC cultures on both fiber matrices were able to produce clinically relevant moduli. Both fibrous constructs expressed scleraxis, an early tendon differentiation marker, and a bimodal peak in expression of the late tendon differentiation marker tenomodulin, a pattern that was not observed in PCL thin film controls. Functionalized matrices achieved a more prominent tenogenic differentiation, possessing greater tenomodulin expression and superior phenotypic maturity according to the ratio of collagen I to collagen III expression. These findings indicate that PNEA-mPh functionalization is an efficient method for improving cell interactions with electrospun PCL matrices for the purpose of tendon repair.

Design and optimization of polyphosphazene functionalized fiber matrices for soft tissue regeneration.

Electrospun polycaprolactone nanofiber matrices surface functionalized with poly[(ethyl alanato), (p-methyl phenoxy),] phosphazene were fabricated for the purpose of soft skeletal tissue regeneration. This preliminary study reports the effect of fiber diameter and polyphosphazene surface functionalization on significant scaffold properties such as morphology, surface hydrophilicity, porosity, tensile properties, human mesenchymal stem cell adhesion and proliferation. Six fiber matrices comprised of average fiber diameters in the range of 400-500, 900-1000, 1400-1500, 1900-2000, 2900-3000 and 3900-4000 nm were considered for primary evaluation. After achieving the greatest proliferation while maintaining moderate tensile modulus, matrices in the diameter range of 2900-3000 nm were selected to examine the effect of coating with 1%, 2% and 3% (weight/volume) polyphosphazene solutions. Polyphosphazene functionalization resulted in rougher surfaces that correlated with coating solution concentration. Analytical techniques such as energy dispersive X-ray analysis, Fourier transform infrared spectroscopy, elemental analysis, differential scanning calorimetry, water contact angle goniometry and confocal microscopy confirmed the presence of polyphosphazene and its distribution on the functionalized fiber matrices. Functionalization achieved through 2% polymer solutions did not affect average pore diameter, tensile modulus, suture retention strength or cell proliferation compared to PCL controls. Surface polyphosphazene functionalization significantly improved the matrix hydrophilicity evidenced through decreased water contact angle of PCL matrices from 130 degrees to 97 degrees. Further, enhanced total protein synthesis by cells during in vitro culture was seen on 2% PPHOS functionalized matrices over controls. Improving PCL matrix hydrophilicity via proposed surface functionalization may be an efficient method to improve cell-PCL matrix interactions.

Nanostructured polymeric scaffolds for orthopaedic regenerative engineering.

Successful regeneration necessitates the development of three-dimensional (3-D) tissue-inducing scaffolds that mimic the hierarchical architecture of native tissue extracellular matrix (ECM). Cells in nature recognize and interact with the surface topography they are exposed to via ECM proteins. The interaction of cells with nanotopographical features such as pores, ridges, groves, fibers, nodes, and their combinations has proven to be an important signaling modality in controlling cellular processes. Integrating nanotopographical cues is especially important in engineering complex tissues that have multiple cell types and require precisely defined cell-cell and cell-matrix interactions on the nanoscale. Thus, in a regenerative engineering approach, nanoscale materials/scaffolds play a paramount role in controlling cell fate and the consequent regenerative capacity. Advances in nanotechnology have generated a new toolbox for the fabrication of tissue-specific nanostructured scaffolds. For example, biodegradable polymers such as polyesters, polyphosphazenes, polymer blends and composites can be electrospun into ECM-mimicking matrices composed of nanofibers, which provide high surface area for cell attachment, growth, and differentiation. This review provides the fundamental guidelines for the design and development of nanostructured scaffolds for the regeneration of various tissue types in human upper and lower extremities such as skin, ligament, tendon, and bone. Examples focusing on the collective work of our laboratory in those areas are discussed to demonstrate the regenerative efficacy of this approach. Furthermore, preliminary strategies and significant challenges to integrate these individual tissues into one complex organ through regenerative engineering-based integrated graft systems are also discussed.

EGFR targeting monoclonal antibody combines with an mTOR inhibitor and potentiates tumor inhibition by acting on complementary signaling hubs.

Nimotuzumab, an anti-epidermal growth factor receptor (anti-EGFR) monoclonal antibody, has been used extensively in many solid tumors and confers significant survival advantage. The antibody has limited skin toxicity and is generally well tolerated. Similar to other anti-EGFR therapies, patients may relapse a few months after treatment. In this study we show for the first time, the use of Nimotuzumab along with Sirolimus has synergistic effect on tumor inhibition as compared with the drugs used individually, in Nimotuzumab responsive and nonresponsive cell lines. In vitro studies prove that while Sirolimus (25 nmol/L) affects the signal downstream to mammalian target of rapamycin (mTOR), Nimotuzumab (83 nmol/L) downregulates pTYR, pMAPK and pSTAT3 by 40%, 20% and 30%, respectively. The combination, targeting these two different signaling hubs, may be associated with the synergistic inhibition observed. In vivo, the use of half human therapeutic equivalent doses for both the drugs substantially reduces tumors established in nude as well as severe combined immunodeficiency (SCID) mice by EGFR overexpressing A-431 cells. The drug combination reduces cell proliferation and the expression of signal transduction molecules. Treated tumors are better differentiated as compared with those established in the control mice. Tumor microarray demonstrates that Nimotuzumab and the combination groups segregate independently to the Sirolimus and the control treatment. The combination uniquely downregulated 55% of the altered tumor genes, extending beyond the typical pathways associated with Nimotuzumab and Sirolimus downstream pathways inhibition. These results would suggest that this nontoxic drug combination improves therapeutic benefit even in patients with low-EGFR expression and severely immunocompromised because of their current medication.

Tissue engineering solutions for tendon repair.

Tendon injuries range from acute traumatic ruptures and lacerations to chronic overuse injuries, such as tendinosis. Even with improved nonsurgical, surgical, and rehabilitation techniques, outcomes following tendon repair are inconsistent. Primary repair remains the standard of care. However, repaired tendon tissue rarely achieves functionality equal to that of the preinjured state. Poor results have been linked to alterations in cellular organization within the tendon that occur at the time of injury and throughout the early stages of healing. Enhanced understanding of the biology of tendon healing is needed to improve management and outcomes. The use of growth factors and mesenchymal stem cells and the development of biocompatible scaffolds could result in enhanced tendon healing and regeneration. Recent advances in tendon bioengineering may lead to improved management following tendon injury.

Electrospun nanofibrous scaffolds for engineering soft connective tissues.

Tissue-engineered medical implants, such as polymeric nanofiber scaffolds, are potential alternatives to autografts and allografts, which are short in supply and carry risks of disease transmission. These scaffolds have been used to engineer various soft connective tissues such as skin, ligament, muscle, and tendon, as well as vascular and neural tissue. Bioactive versions of these materials have been produced by encapsulating molecules such as drugs and growth factors during fabrication. The fibers comprising these scaffolds can be designed to match the structure of the native extracellular matrix (ECM) closely by mimicking the dimensions of the collagen fiber bundles evident in soft connective tissues. These nanostructured implants show improved biological performance over the bulk materials in aspects of cellular infiltration and in vivo integration, and the topography of such scaffolds has been shown to dictate cellular attachment, migration, proliferation, and differentiation, which are critical steps in engineering complex functional tissues and crucial to improved biocompatibility and functional performance. Nanofiber matrices can be fabricated using a variety of techniques, including drawing, molecular self-assembly, freeze-drying, phase separation, and electrospinning. Among these processes, electrospinning has emerged as a simple, elegant, scalable, continuous, and reproducible technique to produce polymeric nanofiber matrices from solutions and their melts. We have shown the ability of this technique to be used to fabricate matrices composed of fibers from a few hundred nanometers to several microns in diameter by simply altering the polymer solution concentration. This chapter will discuss the use of the electrospinning technique in the fabrication of ECM-mimicking scaffolds. Furthermore, selected scaffolds will be seeded with primary adipose-derived stromal cells, imaged using scanning electron microscopy and confocal microscopy, and evaluated in terms of their capacity toward supporting cellular proliferation over time.

Growth/differentiation factor-5 modulates the synthesis and expression of extracellular matrix and cell-adhesion-related molecules of rat Achilles tendon fibroblasts.

This study was designed to examine the cellular and molecular response of tendon fibroblasts to growth/differentiation factor-5 (GDF-5). Rat Achilles tendon fibroblasts (ATFs) were treated in culture with varying concentrations of GDF-5 (0-1000 ng/ml) over varying periods of time (0-12 days). Cell proliferation, evaluated through use of a standard MTT colorimetric assay, confirmed that GDF-5 stimulates ATF proliferation in a concentration- and time-dependent fashion. Temporal and concentration analysis revealed that GDF-5 increases total DNA, glycosaminoglycan (GAG), and hydroxyproline (HYP) content. Ratios of HYP/DNA and GAG/DNA increased with increasing concentrations of GDF-5 (0-1000 ng/ml). Expression of the following 12 extracellular matrix (ECM) and cell-adhesion-related genes was assessed using real-time reverse transcriptase polymerase chain reaction (RT-PCR): collagen I (col I), collagen III (col III), matrix metalloproteinases (MMP)-3 and -13, aggrecan, tissue inhibitor of matrix metalloproteinase (TIMP)-2, syndecan-4, N-cadherin, tenascin-C, biglycan, versican, and decorin. RT-PCR data revealed an increase in the expression of col I, col III, MMP-3, MMP-13, TIMP-2, syndecan-4, N-cadherin, tenascin-C, and aggrecan genes by day 6. A statistically significant decrease in TIMP-2 and MMP-13 was observed on day 12. Decorin expression was depressed at all time points in cells treated with GDF-5. There was no significant change in biglycan expression in ATFs supplemented with GDF-5. These findings suggest that GDF-5 induces cellular proliferation and ECM synthesis as well as expression of ECM and cell-adhesion-related genes in ATFs. This study further defines the influence of GDF-5 on rat ATFs through its action on the expression of genes that are associated with tendon ECM.

Growth differentiation factor-5 regulation of extracellular matrix gene expression in murine tendon fibroblasts.

The synthesis and organization of extracellular matrix (ECM) of tendon, in resting and states of repair, are governed by fibroblasts. Growth differentiation factor-5 (GDF-5) may enhance the cellular response to tendon injury, thus improving the structural outcome of the regenerative tissue. This study was an attempt to identify potential mechanisms controlling the response of fibroblasts to injury and GDF-5, in the pursuit of improved tissue regeneration. There were two sets of experiments. Isolated mice Achilles tendon fibroblasts were treated with different concentrations of rGDF-5 (0-100 ng/ml) for 0-12 days in cell culture. The temporal effect of rGDF-5 on ECM gene expression was analysed for type I collagen and aggrecan expression. Microarray and gene expression analysis were performed on cells treated with 100 ng/ml for 4 days. Forty-five mice underwent bilateral mid-substance Achilles tendon tenotomy and suture repair. Repair sites were injected with 10 µg rGDF-5 or saline. Tendons were assessed histologically at 2, 4 and 6 weeks. Expression of ECM genes procollagen IX, aggrecan, matrix metalloproteinase 9 and fibromodulin were upregulated. Proinflammatory reaction genes were downregulated. rGDF-5 led to an increase in total DNA, glycosaminoglycan (GAG) and hydroxyproline (OHP). The OHP:DNA ratio of fibroblast cultures was increased over all time points, with increased GAG:DNA at day 12. rGDF-5 treatment showed improved collagen organization over controls. The results delineate the mode of action of rGDF-5 at the cellular and gene level. rGDF-5 could play a role in tendon repair and be used for future therapies that promote tendon healing.

Adipose-derived mesenchymal stem cells treated with growth differentiation factor-5 express tendon-specific markers.

OBJECTIVES: Adipose-derived mesenchymal stem cells (ADMSCs) are a unique population of stem cells with therapeutic potential in the treatment of connective tissue injuries. Growth differentiation factor-5 (GDF)-5 is known to play a role in tendon repair and maintenance. The aim of this study was to investigate the effects of GDF-5 on proliferation and tendonogenic gene expression of rat ADMSCs. METHODS: ADMSCs were treated in culture with different concentrations of GDF-5 (0-1000 ng/mL) for 12 days. Biochemical, temporal, and concentration kinetic studies were done. Extracellular matrix (ECM) synthesis, tendonogenic differentiation, and matrix remodeling gene and protein expression were analyzed. RESULTS: GDF-5 led to increased ADMSC proliferation in a dose- and time-dependent manner. ADMSCs demonstrated enhanced ECM (collagen type I, decorin, and aggrecan) and tendonogenic marker (scleraxis, tenomodulin, and tenascin-C) gene expression with 100 ng/mL of GDF-5 (p < 0.05). ECM and tendon-specific markers showed time-dependent increases at various time points (p < 0.05), although decorin decreased at day 9 (p < 0.05). GDF-5 did alter expression of matrix remodeling genes, with no specific trends observed. Western blot analysis confirmed dose- and time-dependent increases in protein expression of tenomodulin, tenascin-C, Smad-8, and matrix metalloproteinase-13. CONCLUSION: In vitro GDF-5 treatment can induce cellular events leading to the tendonogenic differentiation of ADMSCs. The use of combined GDF-5 and ADMSCs tissue-engineered therapies may have a role in the future of tendon repair.

Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering.

Electrospun fiber matrices composed of scaffolds of varying fiber diameters were investigated for potential application of severe skin loss. Few systematic studies have been performed to examine the effect of varying fiber diameter electrospun fiber matrices for skin regeneration. The present study reports the fabrication of poly[lactic acid-co-glycolic acid] (PLAGA) matrices with fiber diameters of 150-225, 200-300, 250-467, 500-900, 600-1,200, 2,500-3,000 and 3,250-6,000 nm via electrospinning. All fiber matrices found to have a tensile modulus from 39.23+/-8.15 to 79.21+/-13.71 MPa which falls in the range for normal human skin. Further, the porous fiber matrices have porosity between 38 to 60% and average pore diameters between 10 to 14 microm. We evaluated the efficacy of these biodegradable fiber matrices as skin substitutes by seeding them with human skin fibroblasts (hSF). Human skin fibroblasts acquired a well spread morphology and showed significant progressive growth on fiber matrices in the 350-1,100 nm diameter range. Collagen type III gene expression was significantly up-regulated in hSF seeded on matrices with fiber diameters in the range of 350-1,100 nm. Based on the need, the proposed fiber skin substitutes can be successfully fabricated and optimized for skin fibroblast attachment and growth.

Tendon: biology, biomechanics, repair, growth factors, and evolving treatment options.

Surgical treatment of tendon ruptures and lacerations is currently the most common therapeutic modality. Tendon repair in the hand involves a slow repair process, which results in inferior repair tissue and often a failure to obtain full active range of motion. The initial stages of repair include the formation of functionally weak tissue that is not capable of supporting tensile forces that allow early active range of motion. Immobilization of the digit or limb will promote faster healing but inevitably results in the formation of adhesions between the tendon and tendon sheath, which leads to friction and reduced gliding. Loading during the healing phase is critical to avoid these adhesions but involves increased risk of rupture of the repaired tendon. Understanding the biology and organization of the native tendon and the process of morphogenesis of tendon tissue is necessary to improve current treatment modalities. Screening the genes expressed during tendon morphogenesis and determining the growth factors most crucial for tendon development will likely lead to treatment options that result in superior repair tissue and ultimately improved functional outcomes.