Utilizing sludge-based activated carbon for targeted leachate mitigation in wastewater treatment.

Activated carbon (AC) based adsorbents derived from waste sludge were utilized to remediate mixed contaminants in wastewater as an integrated waste-to-resource approach promoting a paradigm shift in management of refuse sludge and wastewater. This review specifically focuses on the remediation of constituents of landfill leachate by sludge-based activated carbon (SBAC). The adsorption effectiveness of SBAC for the exclusion of leachate characters including heavy metals, phenols, dyes, phosphates, and phosphorus were explored with regard to modifiers such as pH, temperature, properties of the adsorbent including functional groups, initial doses of absorbent and adsorbate, and duration of exposure to note the impact of each parameter on the efficiency of adsorption of the sludge adsorbent. Through the works of various researchers, it was noted that the properties of the adsorbent, pH and temperature impact the working of SBACs. The pH of the adsorbent by influencing the functional groups. Temperature was expected to have a paramount effect on the adsorption efficiency of the SBACs. The importance of the regeneration and recycling of the adsorbents as well as their leachability is highlighted. Sludge based activated carbon is recommended as a timely, resource-efficient, and sustainable approach for the remediation of wastewater.

Identification and genome-wide analysis provide insights into the genetic diversity and biotechnological potentials of novel cold-adapted Acinetobacter strain.

Extreme cold environments, such as polar regions or high-altitude mountains, are known for their challenging conditions including low temperatures, high salinity, and limited nutrient availability. Microbes that thrive in these environments have evolved specialized strategies to survive and function under such harsh conditions. The study aims to identify, sequence the genome, perform genome assembly, and conduct a comparative genome-wide analysis of Acinetobacter sp. strain P1, which was isolated from the Batura glacier regions of Pakistan. A basic local alignment search tool of NCBI using 16 s RNA gene sequence confirmed the strain Acinetobacter following phylogenetic analysis revealed that strain P1 clustered with Acinetobacter sp. strain AcBz01. The high-throughput Genome sequencing was done by the NovaSeq 6000 sequencing system following de novo genome assembly reported 23 contigs, a genome size of 3,732,502 bp containing approximately 3489 genes and 63 RNAs (60 tRNA, 3 rRNA). The comparative genome analysis revealed that Acinetobacter sp. strain P1 exhibited the highest homology with the Acinetobacter baumannii ATCC 17978 genome and encompassed 1668 indispensable genes, 1280 conserved genes 1821 specific genes suggesting high genomic plasticity and evolutionary diversity. The genes with functional assignments include exopolysaccharide phosphotransferase enzyme, cold-shock proteins, T6SS, membrane modifications, antibiotic resistance, and set of genes related to a wide range of metabolic characteristics such as exopolysaccharides were also present. Moreover, the structural prediction analysis of EPS proteins reveals that structural flexibility allows for conformational modifications during catalysis, which boosts or increases the catalytic effectiveness at lower temperatures. Overall, the identification of Acinetobacter, a cold-adapted bacterium, offers promising applications in bioremediation, enzyme production, food preservation, pharmaceutical development, and astrobiology. Further research and exploration of these microorganisms can unlock their full biotechnological potential and contribute to various industries and scientific endeavors.

Porous Ag3VO4/KIT-6 composite: Synthesis, characterization and enhanced photocatalytic performance for degradation of Congo Red.

Novel Ag3VO4/KIT-6 nanocomposite photocatalyst has been successfully fabricated by a newly-designed simple hard-template induction process, in which the particles of Ag3VO4 were grown on the KIT-6 surface and inside the porous framework of the silica matrix. The developed porous framework nanocomposite was characterized by several techniques including N2-Physiosorption analysis. The obtained nanocomposite revealed a high surface area (273.86 m2/g) along with the possession of monoclinic Ag3VO4, which is highly responsive to visible light (with distinct intensity at about 700 nm). The UV-Vis DRS reveals that the Ag3VO4/KIT-6 photocatalyst bears a bandgap of 2.29 eV which confirms that the material has a good visible light response. The synthesized nanocomposite was tested for its superior physicochemical properties by evaluating its degradation efficiency for Congo Red (CR). The novel composite exhibited superior degradation capability of CR, reaching up to 96.49%, which was around three times the pure Ag3VO4. The detailed kinetic study revealed that the as-prepared material followed a pseudo first order kinetic model for the CR degradation. The study includes a comprehensive parametric study for the formulation of the optimized reaction conditions for photocatalytic reactions. The commercial applicability of the composite material was investigated by a regeneration and recyclability test, which revealed extraordinary results. Furthermore, the possible degradation pathway for CR was also proposed.

An In silico study of derivative of Newcastle disease virus epitopes based vaccine against Hemagglutunin neuraminidase protein.

The causative agent of Newcastle disease (ND) is Newcastle disease virus. It belongs to avian species of Orthoavulavirus, Avulavirinae subfamily and if left untreated it may cause epidemic in poultry. Many vaccines have been made against Newcastle disease based on inactivated and attenuated viruses but become useless due to the genetic changes in the virus. We have recently reported epitope based vaccine by using immunoinformatics approaches. The vaccine was previously constructed against Hemagglutunin neuraminidase protein of Newcastle disease virus. Here we extended our work to develop several chimera of the proposed vaccine to design a new multi-epitope vaccine by shuffling the cytotoxic T lymphocytes (CTL) segments of the vaccine. Total 5040 constructs have been analyzed by shuffling 7 CTL epitopes. Highest antigenic multi-epitope construct was selected for the further study. Our new multi-epitope vaccine (MEV) construct contains 259 amino acids and is immunogenic, more antigenic and non-allergen. The refinement of the structure of MEV construct was performed. Molecular docking analyses showed its maximum binding with avian Toll-like 4 receptor. Subsequently, immune simulations showed its predicted ability to induce the host primary and secondary responses. Study suggests that our new multi-epitope vaccine chimera is more effective and stable protein against Newcastle disease virus strains in Pakistan. However, further studies are required to validate the vaccine through In vitro and In vivo studies.

A review on activated carbon modifications for the treatment of wastewater containing anionic dyes.

Polluted water resources, particularly those polluted with industrial effluents' dyes, are carcinogenic and hence pose a severe threat to sustainable and longstanding worldwide development. Meanwhile, adsorption is a promising process for polluted/wastewater treatment. In particular, activated carbon (AC) is popular among various wastewater treatment adsorbents, especially in the organic contaminants' remediation in wastewater. Hence, the AC's synthesis from degradable and non-degradable resources, the carbon activation involved in the AC synthesis, and the AC's modification to cutting-edge and effective materials have been modern-research targets in recent years. Likewise, the main research focuses worldwide have been the salient AC characteristics, such as its surface chemistry, porosity, and enhanced surface area. Notably, various modified-AC synthesis methods have been employed to enhance the AC's potential for improved contaminants-removal. Hence, we critically analyze the different modified ACs (with enhanced (surface) functional groups and textural properties) of their capacity to remove different-natured anionic dyes in wastewater. We also discuss the corresponding AC modification techniques, the factors affecting the AC properties, and the modifying agents' influence on the AC's morphological/adsorptive properties. Finally, the AC research of future interest has been proposed by identifying the current AC research gaps, especially related to the AC's application in wastewater treatment.

Functionalized organic filler based integrated membranes for environmental remediation.

Mixed matrix membranes (MMMs) are synthesized for efficient CO2 separation released from various anthropogenic sources, which are due to global environmental concerns. The synergetic effect of porous nitrogen-rich, CO2-philic filler and polymer in mixed matrix-based membranes (MMMs) can separate CO2 competent. The development of various loadings of porphyrin poly(N-isopropyl Acryl Amide) (P-NIPAM)as functionalized organic fillers (5-20%) in polysulfone (PSU) through solution casting is carried out followed by the various characterizations including field emission scanning electron microscopy (FESEM), X-ray diffraction analysis (XRD), Fourier Transform Infrared Spectrometer(FT-IR) analysis and pure and mixed gas permeations ranging from 2 to 10 bar feed pressure. Due to both organic species interactions in the matrix, well-distributed fillers and homogenous surfaces, and cross-sectional structures were observed due to π-π interactions and Lewis's basic functionalities. The strong affinity of porous nitrogen-rich and CO2-philic fillers through gas permeation analysis showed high CO2/CH4 and CO2/N2 gas performance that surpassed Robeson's upper bound limit. Comparatively, MMMs showed improved CO2/CH4 permeabilities from 87.5 ± 0.5 Barrer to 88.2 ± 0.9 Barrer than pure polymer matrix. For CO2/N2, CO2 permeabilities improved to 75 ± 0.8 Barrer than pure polymer matrix. For both gas pairs (CO2/CH4, CO2/N2), respective pureselectivities (84%; 86%) and binary selectivities (85% and 85%)were improved. Various theoretical gas permeation models were used to predict CO2 permeabilities for MMMs from which the modified Maxwell-Wagner-Sillar model showed the least AARE% of 0.87. The results showed promising results for efficient CO2 separation due to exceptional functionalized P-PNIPAM affinitive properties. Finally, cost analysis reflected the inflated cost of membranes production for industrial setup using indigenous resources.

Prediction and analysis of multi epitope based vaccine against Newcastle disease virus based on haemagglutinin neuraminidase protein.

Newcastle disease virus (NDV), an avian orthoavulavirus, is a causative agent of Newcastle disease named (NDV), and can cause even the epidemics when disease is not treated. Previously several vaccines based on attenuated and inactivated viruses have been reported which are rendered useless with the passage of time due to versatile changes in viral genome. Therefore, we aimed to develop an effective multi-epitope vaccine against the haemagglutinin neuraminidase (HN) protein of 26 NDV strains from Pakistan through a modern immunoinformatic approaches. As a result, a vaccine chimaera was constructed by combining T-cell and B-cell epitopes with the appropriate linkers and adjuvant. The designed vaccine was highly immunogenic, non-allergen and antigenic; therefore, the potential 3D-structureof multi epitope vaccine was constructed, refined and validated. A molecular docking study of a multiepitope vaccine candidate with the chicken Toll-like receptor-4 indicated successful binding. An In silico immunological simulation was used to evaluate the candidate vaccine's ability to elicit an effective immune response. According to the computational studies, the proposed multiepitope vaccine is physically stable and may induce immune responses whichsuggested it a strong candidate against 26 Newcastle disease virus strains from Pakistan.

Prediction and evaluation of multi epitope based sub-unit vaccine against Salmonella typhimurium.

Salmonella enteric serovar Typhimurium is the most common enteric pathogen in humans and animals. Consumption of contaminated food or water triggers inflammation that allows Salmonella to spread into the gut and causes gastrointestinal diseases. The infection spreads by intestinal invasion, phagocyte internalization and subsequent dissemination in many other patients. This research used TolA, a Salmonella typhimurium membrane protein, to computationally design a multi-epitope vaccine against the pathogen. Complete consistency of the candidate vaccine was checked In silico, and molecular dynamics simulations confirmed the vaccine's stability. According to docking report, the vaccine has a good affinity with toll-like receptors. In silico cloning and codon optimization techniques improved the vaccine's efficacy in Salmonella typhimurium manifestation process. The candidate vaccine induced an efficient immune response, as determined by In silico immune simulation. Computational studies revealed that the engineered multi-epitope vaccine is structurally stable, capable of eliciting particular immunological reactions, and therefore a candidate for a latent Salmonella typhimurium vaccine. However, wet lab studies and further investigations are required to confirm the results.

Integrating life cycle assessment and characterisation techniques: A case study of biodiesel production utilising waste Prunus Armeniaca seeds (PAS) and a novel catalyst.

Prunus Armeniaca seed (PAS) oil was utilised as a waste biomass feedstock for biodiesel production via a novel catalytic system (SrO-La2O3) based on different stoichiometric ratios. The catalysts have been characterised and followed by a parametric analysis to optimise catalyst results. The catalyst with a stoichiometric ratio of Sr: La-8 (Sr-La-C) using parametric analysis showed an optimum yield of methyl esters is 97.28% at 65 °C, reaction time 75 min, catalyst loading 3 wt% and methanol to oil molar ratio of 9. The optimum catalyst was tested using various oil feedstocks such as waste cooking oil, sunflower oil, PAS oil, date seed oil and animal fat. The life cycle assessment was performed to evaluate the environmental impacts of biodiesel production utilising waste PAS, considering 1000 kg of biodiesel produced as 1 functional unit. The recorded results showed the cumulative abiotic depletion of fossil resources over the entire biodiesel production process as 22,920 MJ, global warming potential as 1150 kg CO2 equivalent, acidification potential as 4.89 kg SO2 equivalent and eutrophication potential as 0.2 kg PO43- equivalent for 1 tonne (1000 kg) of biodiesel produced. Furthermore, the energy ratio (measured as output energy divided by input energy) for the entire production process was 1.97. These results demonstrated that biodiesel obtained from the valorisation of waste PAS provides a suitable alternative to fossil fuels.

Enhanced solar light photocatalytic performance of Fe-ZnO in the presence of H2O2, S2O82-, and HSO5- for degradation of chlorpyrifos from agricultural wastes: Toxicities investigation.

This study reported Fe doped zinc oxide (Fe-ZnO) synthesis to degrade chlorpyrifos (CPY), a highly toxic organophosphate pesticide and important sources of agricultural wastes. Fourier transform infrared, X-ray diffraction, scanning electron microscope, and energy-dispersive X-ray spectroscopic analyses showed successful formation of the Fe-ZnO with highly crystalline and amorphous nature. Water collected from agricultural wastes were treated with Fe-ZnO and the results showed 67% degradation of CPY by Fe-ZnO versus 39% by ZnO at 140 min treatment time. Detail mechanism involving reactive oxygen species production from solar light activated Fe-ZnO and their role in degradation of CPY was assessed. Use of H2O2, peroxydisulfate (S2O82-) and peroxymonosulfate (HSO5-) with Fe-ZnO under solar irradiation promoted removal of CPY. The peroxides yielded hydroxyl (OH) and sulfate radical () under solar irradiation mediated by Fe-ZnO. Effects of several parameters including concentration of pollutant and oxidants, pH, co-existing ions, and presence of natural organic matter on CPY degradation were studied. Among peroxides, HSO5- revealed to provide better performance. The prepared Fe-ZnO showed high reusability and greater mineralization of CPY. The GC-MS analysis showed degradation of CPY resulted into several transformation products (TPs). Toxicity analysis of CPY as well as its TPs was performed and the formation of non-toxic acetate imply greater capability of the treatment technology.

Sustainable mixed matrix membranes containing porphyrin and polysulfone polymer for acid gas separations.

The synergetic effect of nitrogen-rich and CO2-philic filler and polymer in mixed matrix-based membranes (MMMs) can separate CO2 competently. The introduction of well-defined nanostructured porous fillers of pores close to the kinetic diameter of the gas molecule and polymer matrix compatibility is a challenge in improving the gas transportation characteristics of MMMs. This study deals with the preparation of porphyrin filler and the polysulfone (PSf) polymer MMMs. The fillers demonstrated uniform distribution, uniformity, and successful bond formation. MMMs demonstrated high thermal stability with a glass transition temperature in the range of 480-610 °C. The porphyrin filler exhibited microporous nature with the presence of π-π bonds and Lewis's basic functionalities between filler-polymer resulted in a highly CO2-philic structure. The pure and mixed gas permeabilities and selectivity were successfully improved and surpass the Robeson's upper bound curve's tradeoff. Additionally, the temperature influence on CO2 permeability revealed lower activation energies at higher temperatures leading to the gas transport facilitation. This can be granted consistency and long-term durability in polymer chains. These results highlight the unique properties of porphyrin fillers in CO2 separation mixed matrix membranes and offer new knowledge to increase comprehension of PSf performance under various contents or environments.

Wind speed pattern data and wind energy potential in Pakistan: current status, challenging platforms and innovative prospects.

Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand, depletion of fossil fuels and environmental concerns, many developing and developed countries are moving towards alternative renewable resources such as solar energy, wind energy and biomass. Wind energy as a renewable energy source is gaining a lot of significant attention. Wind energy is a sustainable solution to produce energy having potential benefits such as clean source, reduced toxic gases emission and environmental friendly protocol for operation. Pakistan is among the top countries facing the worst energy crisis due to different political and financial issues. Pakistan is blessed with a huge potential of wind energy having all the basic requirements such as windy regions and good wind speed for harnessing energy. Pakistan can utilize the potential of wind energy to reduce the problem of energy outrage in the country and also take steps towards green economy from conventional fuel economy. This critical review highlights the current status, potential and the steps taken in the past and present to overcome the energy shortage in Pakistan by employing wind energy. Outlook on wind speed data, deployment of wind energy, environmental effect of wind energy and its barriers in the adoption are discussed with recommendations and suggestions to utilize this clean energy in an effective way. Graphical abstract.

Human and ecological risk assessment of heavy metals in different particle sizes of road dust in Muscat, Oman.

Heavy metal contamination of Hg, As, Cu, Cr, Zn, and Pb was investigated in three different fractions 45, 125, and 200 µm of road dust in Muscat, Oman. Dust samples were collected from three different traffic roads, viz. high, medium, and low based on traffic volume and then sieved individually before they analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES). Cu has the highest level among the analyzed metals while the lowest amount was for Hg. Most of the metals in all traffic sites have higher concentration in finer fraction and the concentrations of Cu, Pb, and Zn in HT road dust decreased significantly from finer fraction (45 µm) to bigger fraction size (200 µm). The risks of analyzed heavy metals to the urban ecosystem and human health were calculated by the potential ecological risk index and human exposure model, respectively. Risk index levels of studied metals in the three fractions and roads vary from strong to very strong potential. Hg found to have the greatest contribution in risk index in the three different fractions and roads. The values of risk levels for individual metal contamination in the dust street samples from different roads and fractions were ranked in the following order: Hg > Cu > Pb > Cr > Zn. Ingestion is the main pathway of exposure to road dust particles for both children and adults, followed by dermal contact absorption. The HI for children and adults exposed to 45- and 125-µm particles were higher than exposed to 200-µm particles, which indicated that finer particles tend to have higher non-carcinogenic risk. The non-carcinogenic risks of the studied heavy metals to children and adults are within safe threshold value; however, health risks of Cr, Pb, and Cu were relatively high for children.

Potential of dates (Phoenix dactylifera L.) as natural antioxidant source and functional food for healthy diet.

Date fruit is well known for their taste and concentrated nutritional components. Present study investigated two Omani date varieties i.e., Umsellah and Khalas, related to their physical traits, antioxidant properties, carbohydrates and nutritional values. Results showed that total-phenolic in Umsellah were 62% higher compared to Khalas, i.e., 164.22 and 103.85 mg/100 g. Among antioxidants, gallic acid in both Umsellah and Khalas were 35.77 and 27.41 mg/ 100 g respectively. Caffeic and syringic acid resulted 50% greater in Umsellah compared to Khalas. The ρ-coumaric acid contents in Umsellah and Khalas were 24.94 and 21.69 mg/ 100 g respectively. Total sugar in Umsellah (51.37 g of glucose equivalent / 100 g of dates) was found higher compared to Khalas (44.78 g of glucose equivalent / 100 g of dates). Among nutrients, potassium (K) level is very high (> 450 mg/100 g) in both the varieties with optimum range of other nutrients. For dietary fibers, Umsellah (81.17 g/100 g) reported higher proportion than Khalas (67.35 g/100 g). Overall findings inferred that Umsellah contained greater amount of beneficial individual phenolic and sugar compounds for the nourishment of health than Khalas. Therefore, as high antioxidant and nourished with several nutritional components, Umsellah and Khalas can be well adopted as organic and medicinal diets and can be used for various by-products irrespective of their market value.

Pyrolysis of solid waste residues from Lemon Myrtle essential oils extraction for bio-oil production.

Solid waste residues from the extraction of essential oils are projected to increase and need to be treated appropriately. Valorization of waste via pyrolysis can generate value-added products, such as chemicals and energy. The characterization of lemon myrtle residues (LMR) highlights their suitability for pyrolysis, with high volatile matter and low ash content. Thermogravimetric analysis/derivative thermogravimetric revealed the maximum pyrolytic degradation of LMR at 335 °C. The pyrolysis of LMR for bio-oil production was conducted in a fixed-bed reactor within a temperature range of 350-550 °C. Gas chromatography-mass spectrometry showed that the bio-oil contained abundant amounts of acetic acid, phenol, 3-methyl-1,2-cyclopentanedione, 1,2-benzenediol, guaiacol, 2-furanmethanol, and methyl dodecanoate. An increase in pyrolysis temperature led to a decrease in organic acid and ketones from 18.09% to 8.95% and 11.99% to 8.75%, respectively. In contrast, guaiacols and anhydrosugars increased from 24.23% to 30.05% and from 3.57% to 7.98%, respectively.

Valorization of underutilized waste biomass from invasive species to produce biochar for energy and other value-added applications.

Biochar production from invasive species biomass discarded as waste was studied in a fixed bed reactor pyrolysis system under different temperature conditions for value-added applications. Prior to pyrolysis, the biomass feedstock was characterized by proximate, ultimate, and heating value analyses, while the biomass decomposition behavior was examined by thermogravimetric analysis. The heating values of the feedstock biomass ranged from 18.65 to 20.65 MJ/kg, whereas the volatile matter, fixed carbon, and ash content were 61.54-72.04 wt %, 19.27-26.61 wt % and 1.51-1.86 wt %, respectively. The elemental composition of carbon, hydrogen, and oxygen in the samples was reported to be in the range of 47.41-48.47 wt %, 5.50-5.88 wt % and 46.10-45.18 wt %, respectively, while the nitrogen and sulphur content in the biomass samples were at very low concentrations, making it more useful for valorization from environmental aspects. The biochar yields were reported in the range of 45.36-58.35 wt %, 28.63-44.38 wt % and 22.68-29.42 wt % at a pyrolysis temperature of 400 °C, 500 °C, and 600 °C, respectively. The biochars were characterized from ultimate analysis, heating value, energy densification ratio, energy yield, pH, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy and energy dispersive X-ray spectrometry (SEM and EDX), to evaluate their potential for value-added applications. The carbon content, heating value, energy densification ratio, and the porosity of the biochars improved with the increase in pyrolysis temperature, while the energy yield, hydrogen, oxygen, and nitrogen content of the biochars decreased. This study revealed the potential of the valorization of underutilized discarded biomass of invasive species via a pyrolysis process to produce biochar for value-added applications.

Analysis of the conformational changes caused by the mutations in mitofusin2 gene by Insilico approach.

OBJECTIVE: To find the effect of pathogenic Mitofusin 2 mutations, responsible for Charcot-Marie-Tooth hereditary neuropathy type 2A, on protein structure. METHODS: The study was conducted at department of biosciences COMSATS University Islamabad, Sahiwal campus from September 2016 to July 2017, and comprised patients with Charcot Marie-Tooth hereditary neuropathy type 2A who were divided into early-onset severe group A and late-onset mild group B. Bioinformatics and molecular analysis was done to find the changes in the protein structure caused by the mutation. Three mutations were selected in two domains of the gene. These were: p. Arg94Trp, p. His165Arg and p. Thr362Met. RESULTS: Of the 10 patients, 5(50%) were in each of the two groups. Change in the structure was predicted in the mutated protein at position p. Arg94Trp, and, due to the mutation, an extra alpha helix was formed in the mutated protein. CONCLUSIONS: Change in the structure of protein can be in a critical position that is involved in the mitochondrial fusion process. However, further studies are required to validate and explain the findings.

Physical and chemical mutagens improved Sporotrichum thermophile, strain ST20 for enhanced Phytase activity.

OBJECTIVE: Phosphorous is an essential micronutrient of plants and involved in critical biological functions. In nature, phosphorous is mostly present in immobilized inorganic mineral and in the fixed organic form including phytic acid and phosphoesteric compounds. However, the bioavailability of bound phosphorous could be enhanced by the use of phosphate solubilizing microorganisms such as bacteria and fungi. The phytases are widespread in an environment and have been isolated from different sources comprising bacteria and fungi. METHODOLOGY: In current studies, we show the successful use of gamma rays and EMS (Ethyl Methane Sulphonate) mutagenesis for enhanced activity of phytases in a fungal strain Sporotrichum thermophile. RESULTS: We report an improved strain ST2 that could produce a clear halo zone around the colony, up to 24 mm. The maximum enzymatic activity was found of 382 U/mL on pH 5.5. However, the phytase activity was improved to 387 U/ml at 45 °C. We also report that the mutants produced through EMS showed the greater potential for phytase production. CONCLUSION: The current study highlights the potential of EMS mutagenesis for strain improvement over physical mutagens.

Anaerobic membrane bioreactors for wastewater treatment: Novel configurations, fouling control and energy considerations.

Water shortage, public health and environmental protection are key motives to treat wastewater. The widespread adoption of wastewater as a resource depends upon development of an energy-efficient technology. Anaerobic membrane bioreactor (AnMBR) technology has gained increasing popularity due to their ability to offset the disadvantages of conventional treatment technologies. However there are several hurdles, yet to climb over, for wider spread and scale-up of the technology. This paper reviews fundamental aspects of anaerobic digestion of wastewater, and identifies the challenges and opportunities to the further development of AnMBRs. Membrane fouling and its implications are discussed, and strategies to control membrane fouling are proposed. Novel AnMBR configurations are discussed as an integrated approach to overcome technology limitations. Energy demand and recovery in AnMBRs is analyzed. Finally key issues that require urgent attention to facilitate global penetration of AnMBR technology are highlighted.

In silico analysis of four structural proteins of aphthovirus serotypes revealed significant B and T cell epitopes.

Foot and Mouth disease (FMD) is economically devastating, highly contagious transboundry viral disease of livestock with 100% morbidity, rapid spread and severe production losses in animals. The FMDV has seven different serotypes. There is no vaccine that can protect animals from all serotypes. Hence, it is need of the day to develop a vaccine that protects animals from hetrologous challenge. In this study, we used immunoinformatics approach to find T and B-cell epitopes that will help to construct a universal vaccine for FMDV. For this purpose, first we constructed a consensus sequence for four structural proteins (VP1, VP2, VP3 and VP4) of aphthovirus for seven serotypes (A, O, C, Asia1, SAT1, SAT2 and SAT3). Various computational tools were used to perform multiple sequence alignment to identify the conserved regions, generation of consensus sequence through conserved regions, structures prediction and finally prediction of B and T cell epitopes. We predicted 5 B cell and 18 T cell epitopes. Finally a GPGPG spacer was used to join these epitopes to decrease binding affinity around the core binding regions. Hence, our study identified the epitopes which can be used to develop cross protective vaccines against all the fatal strains of Aphthovirus which can easily protect all the serotypes. Though, successful In vivo and In vitro studies are required to determine the genuine strength of our predicted epitopes against the fatal strains of Aphthovirus.