Application of Chiral Transfer Reagents to Improve Stereoselectivity and Yields in the Synthesis of the Antituberculosis Drug Bedaquiline.

Bedaquiline (BDQ) is an important drug for treating multidrug-resistant tuberculosis (MDR-TB), a worldwide disease that causes more than 1.6 million deaths yearly. The current synthetic strategy adopted by the manufacturers to assemble this molecule relies on a nucleophilic addition reaction of a quinoline fragment to a ketone, but it suffers from low conversion and no stereoselectivity, which subsequently increases the cost of manufacturing BDQ. The Medicines for All Institute (M4ALL) has developed a new reaction methodology to this process that not only allows high conversion of starting materials but also results in good diastereo- and enantioselectivity toward the desired BDQ stereoisomer. A variety of chiral lithium amides derived from amino acids were studied, and it was found that lithium (R)-2-(methoxymethyl)pyrrolidide, obtained from d-proline, results in high assay yield of the desired syn-diastereomer pair (82%) and with considerable stereocontrol (d.r. = 13.6:1, e.r. = 3.6:1, 56% ee), providing BDQ in up to a 64% assay yield before purification steps toward the final API. This represents a considerable improvement in the BDQ yield compared to previously reported conditions and could be critical to further lowering the cost of this life-saving drug.

Bayesian Optimization of Computer-Proposed Multistep Synthetic Routes on an Automated Robotic Flow Platform.

Computer-aided synthesis planning (CASP) tools can propose retrosynthetic pathways and forward reaction conditions for the synthesis of organic compounds, but the limited availability of context-specific data currently necessitates experimental development to fully specify process details. We plan and optimize a CASP-proposed and human-refined multistep synthesis route toward an exemplary small molecule, sonidegib, on a modular, robotic flow synthesis platform with integrated process analytical technology (PAT) for data-rich experimentation. Human insights address catalyst deactivation and improve yield by strategic choices of order of addition. Multi-objective Bayesian optimization identifies optimal values for categorical and continuous process variables in the multistep route involving 3 reactions (including heterogeneous hydrogenation) and 1 separation. The platform's modularity, robotic reconfigurability, and flexibility for convergent synthesis are shown to be essential for allowing variation of downstream residence time in multistep flow processes and controlling the order of addition to minimize undesired reactivity. Overall, the work demonstrates how automation, machine learning, and robotics enhance manual experimentation through assistance with idea generation, experimental design, execution, and optimization.

Diastereoselectivity is in the Details: Minor Changes Yield Major Improvements to the Synthesis of Bedaquiline.

Bedaquiline is a crucial medicine in the global fight against tuberculosis, yet its high price places it out of reach for many patients. Herein, we describe improvements to the key industrial lithiation-addition sequence that enable a higher yielding and therefore more economical synthesis of bedaquiline. Prioritization of mechanistic understanding and multi-lab reproducibility led to optimized reaction conditions that feature an unusual base-salt pairing and afford a doubling of the yield of racemic bedaquiline. We anticipate that implementation of these improvements on manufacturing scale will be facile, thereby substantially increasing the accessibility of this essential medication.

Synthesis of (±)-Emtricitabine and (±)-Lamivudine by Chlorotrimethylsilane-Sodium Iodide-Promoted Vorbrüggen Glycosylation.

By simple combination of water and sodium iodide (NaI) with chlorotrimethylsilane (TMSCl), promotion of a Vorbrüggen glycosylation en route to essential HIV drugs emtricitabine (FTC) and lamivudine (3TC) is achieved. TMSCl-NaI in wet solvent (0.1 M water) activates a 1,3-oxathiolanyl acetate donor for N-glycosylation of silylated cytosine derivatives, leading to cis-oxathiolane products with up to 95% yield and >20:1 dr. This telescoped sequence is followed by recrystallization and borohydride reduction, resulting in rapid synthesis of (±)-FTC/3TC from a tartrate diester.

Toward a Practical, Nonenzymatic Process for Investigational COVID-19 Antiviral Molnupiravir from Cytidine: Supply-Centered Synthesis.

A scalable four-step synthesis of molnupiravir from cytidine is described herein. The attractiveness of this approach is its fully chemical nature involving inexpensive reagents and more environmentally friendly solvents such as water, isopropanol, acetonitrile, and acetone. Isolation and purification procedures are improved in comparison to our earlier study as all intermediates can be isolated via recrystallization. The key steps in the synthesis, namely, ester formation, hydroxyamination, and deprotection were carried out on a multigram scale to afford molnupiravir in 36-41% yield with an average purity of 98 wt % by qNMR and 99 area% by HPLC.

A Call for Increased Focus on Reproductive Health within Lab Safety Culture.

The approach to reproductive health and safety in academic laboratories requires increased focus and a shift in paradigm. Our analysis of the current guidance from more than 100 academic institutions' Chemical Hygiene Plans (CHPs) indicates that the burden to implement laboratory reproductive health and safety practices is often placed on those already pregnant or planning conception. We also found inconsistencies in the classification of potential reproductive toxins by resources generally considered to be authoritative, adding further confusion. In the interest of human health and safe laboratory practice, we suggest straightforward changes that institutions and individual laboratories can make to address these present deficiencies: Provide consistent and clear information to laboratory researchers about reproductive health and normalize the discussion of reproductive health among all researchers. Doing so will promote safer and more inclusive laboratory environments.

Progress Toward a Large-Scale Synthesis of Molnupiravir (MK-4482, EIDD-2801) from Cytidine.

Molnupiravir (MK-4482, EIDD-2801) is a promising orally bioavailable drug candidate for the treatment of COVID-19. Herein, we describe a supply-centered and chromatography-free synthesis of molnupiravir from cytidine, consisting of two steps: a selective enzymatic acylation followed by transamination to yield the final drug product. Both steps have been successfully performed on a decagram scale: the first step at 200 g and the second step at 80 g. Overall, molnupiravir has been obtained in a 41% overall isolated yield compared to a maximum 17% isolated yield in the patented route. This route provides many advantages to the initial route described in the patent literature and would decrease the cost of this pharmaceutical should it prove safe and efficacious in ongoing clinical trials.

Continuous flow strategies for using fluorinated greenhouse gases in fluoroalkylations.

Large quantities of fluorinated gases are generated as intermediates or byproducts from fluorinated polymer production annually, and they are effective ozone depleting substances or greenhouse gases. On the other hand, the incorporation of fluoroalkyl groups into drug molecules or bioactive compounds has been shown to enhance biological properties such as the bioavailability, binding selectivity, and metabolic stability. Extraction of fluoroalkyl sources, including trifluoromethyl and difluoromethyl groups, from the fluorinated gases is highly desirable, yet challenging under regular batch reaction conditions. Flow chemistry is an emerging and promising technique to address long-standing challenges in gas-liquid batch reactions such as insufficient interfacial contact and scalability issues. In this review, we highlight recent advances in continuous flow strategies toward enabling the use of fluorinated greenhouse gases in organic synthesis.

Di-tert-butyl Phosphonate Route to the Antiviral Drug Tenofovir.

Di-tert-butyl oxymethyl phosphonates were investigated regarding their suitability for preparing the active pharmaceutical ingredient tenofovir (PMPA). First, an efficient and simple access to the crystalline di-tert-butyl(hydroxymethyl)phosphonate was developed. O-Mesylation gave high yields of the active phosphonomethylation reagent. For the synthesis of tenofovir, a two-step sequence was developed using Mg(OtBu)2 as the base for the alkylation of (R)-9-(2-hydroxypropyl)adenine. Subsequent deprotection could be achieved with aqueous acids. (Di-tert-butoxyphosphoryl)methyl methanesulfonate showed to be the most efficient electrophile tested, affording PMPA in 72% yield on a 5 g scale. The developed protocol could also be applied for the preparation of the hepatitis B drug adefovir (64% yield/1 g scale).

On-Demand Generation and Use in Continuous Synthesis of the Ambiphilic Nitrogen Source Chloramine.

Herein, we demonstrate the on-demand synthesis of chloramine from aqueous ammonia and sodium hypochlorite solutions, and its subsequent utilization as an ambiphilic nitrogen source in continuous-flow synthesis. Despite its advantages in cost and atom economy, chloramine has not seen widespread use in batch synthesis due to its unstable and hazardous nature. Continuous-flow chemistry, however, provides an excellent platform for generating and handling chloramine in a safe, reliable, and inexpensive manner. Unsaturated aldehydes are converted to valuable aziridines and nitriles, and thioethers are converted to sulfoxides, in moderate to good yields and exceedingly short reaction times. In this telescoped process, chloramine is generated in situ and immediately used, providing safe and efficient conditions for reaction scale-up while mitigating the issue of its decomposition over time.

A concise route to MK-4482 (EIDD-2801) from cytidine.

A two-step route to MK-4482 (EIDD-2801, 1) was developed consisting of an esterification and hydroxamination of cytidine. The selective acylation and direct amination eliminate the need for protecting and activating groups and proceed in overall yield of 75%, a significant advancement over the reported yield of 17%. The step count is reduced from five transformations to two, and expensive uridine is replaced with the more available cytidine.

Deuteriodifluoromethylation and gem-Difluoroalkenylation of Aldehydes Using ClCF2 H in Continuous Flow.

The deuteriodifluoromethyl group (CF2 D) represents a challenging functional group due to difficult deuterium incorporation and unavailability of precursor reagents. Herein, we report the use of chlorodifluoromethane (ClCF2 H) gas in the continuous flow deuteriodifluoromethylation and gem-difluoroalkenylation of aldehydes. Mechanistic studies revealed that the difluorinated oxaphosphetane (OPA) intermediate can proceed via alkaline hydrolysis in the presence of D2 O to provide α-deuteriodifluoromethylated benzyl alcohols or undergo a retro [2+2] cycloaddition under thermal conditions to provide the gem-difluoroalkenylated product.

Total Synthesis of (±)-Sceptrin.

A four-step synthesis of the dimeric pyrrole-imidazole alkaloid sceptrin is reported. The brevity of the route is based on a simple solution developed for selective assembly of the cyclobutane core of the natural product. The photochemical intermolecular [2 + 2] dimerization of a useful hymenidin surrogate enables direct entry to this enigmatic class of biologically active marine secondary metabolites.

Catalytic Generation and Use of Ketyl Radical from Unactivated Aliphatic Carbonyl Compounds.

Generation of a ketyl radical from unactivated aliphatic carbonyl compounds is an important strategy in organic synthesis. Herein, catalytic generation and use of a ketyl radical for the reductive coupling of aliphatic carbonyl compounds and styrenes by organic photoredox catalysis is described. The method is applicable to both aliphatic ketones and aldehydes to afford the corresponding tertiary and secondary alcohols in continuous flow and batch. Preliminary mechanistic investigation suggests the catalytic formation of a ketyl radical intermediate.

Diazotization of S-Sulfonyl-cysteines.

We report the preparation of enantiomerically enriched ß-thio-α-hydroxy and α-chloro carboxylic acid and ester building blocks by diazotization of S-sulfonyl-cysteines. The thiosulfonate protecting group demonstrated resistance to oxidation and attenuation of sulfur's nucleophilicity by the anomeric effect. The key transformation was optimized by a 22 factorial design of experiment, highlighting the unique reactivity of cysteine derivatives in comparison with aliphatic amino acids.

Continuous Flow Synthesis of ACE Inhibitors From N-Substituted l-Alanine Derivatives.

A strategy for the continuous flow synthesis of angiotensin converting enzyme (ACE) inhibitors is described. An optimization effort guided by in situ IR analysis resulted in a general amide coupling approach facilitated by N-carboxyanhydride (NCA) activation that was further characterized by reaction kinetics analysis in batch. The three-step continuous process was demonstrated by synthesizing 8 different ACE inhibitors in up to 88 % yield with throughputs in the range of ≈0.5 g h-1 , all while avoiding both isolation of reactive intermediates and process intensive reaction conditions. The process was further developed by preparing enalapril, a World Health Organization (WHO) essential medicine, in an industrially relevant flow platform that scaled throughput to ≈1 g h-1 .

Synthesis of the EFG Framework of Tamulamides A and B.

Synthesis of the fused polycyclic ether motif comprising the EFG rings of the marine ladder polyethers tamulamides A and B has been achieved via two different etherification strategies. Ultimately, a reductive etherification approach proved most successful due to tolerance of the G ring substitution and provided the EFG 6,7,6 ring system in 58% yield.

A robotic platform for flow synthesis of organic compounds informed by AI planning.

The synthesis of complex organic molecules requires several stages, from ideation to execution, that require time and effort investment from expert chemists. Here, we report a step toward a paradigm of chemical synthesis that relieves chemists from routine tasks, combining artificial intelligence-driven synthesis planning and a robotically controlled experimental platform. Synthetic routes are proposed through generalization of millions of published chemical reactions and validated in silico to maximize their likelihood of success. Additional implementation details are determined by expert chemists and recorded in reusable recipe files, which are executed by a modular continuous-flow platform that is automatically reconfigured by a robotic arm to set up the required unit operations and carry out the reaction. This strategy for computer-augmented chemical synthesis is demonstrated for 15 drug or drug-like substances.

Modular Continuous Flow Synthesis of Imatinib and Analogues.

A modular continuous flow synthesis of imatinib and analogues is reported. Structurally diverse imatinib analogues are rapidly generated using three readily available building blocks via a flow hydration/chemoselective C-N coupling sequence. The newly developed continuous flow hydration and amidation modules each exhibit a broad scope with good to excellent yields. Overall, the method described does not require solvent switches, in-line purifications, or packed-bed apparatuses due to the judicious manipulation of flow setups and solvent mixtures.

Total Synthesis of the Marine Ladder Polyether Gymnocin B.

Herein, we report the first total synthesis of marine ladder polyether gymnocin B (1) based on a two-phase strategy. In Phase I, inspired by the proposed biosynthesis, epoxide-opening cascades assemble 10 out of 15 cyclic ether rings making up the molecular core. In the subsequent Phase II, coalescence elevates the molecular complexity further by coupling of these subunits. Our two-phase synthetic approach significantly improved the step efficiency of the synthesis of this class of natural products.