RESUMO
This study investigated the impact of ultra-shear technology (UST) processing on dairy-pea protein dispersions with different fat levels. Raw milk, skim milk, and cream, as well as model dispersions with combinations of dairy products and pea protein (i.e., raw milk with pea protein, skim milk with pea protein, and cream with pea protein) were employed as test samples. UST experiments were conducted at a pressure of 400 MPa and 70 °C shear valve exit temperature. The UST treatment increased the viscosity of the dispersions and the increases depended on the fat level. Dairy-pea protein dispersions from raw milk and skim milk were shear thinning and mathematically described by the power-law model defined by the consistency coefficient, K (Pa·sn) and the flow behavior index, n. UST treated cream + pea protein dispersions produced structures with gel-like characteristics. Microstructure and particle size analysis determined by laser scanning microscope revealed a reduction in particle size after UST treatment in raw milk + pea protein and skim milk + pea protein dispersions up to 7.55 and 8.30 µm, respectively. In contrast, the particle mean diameter of cream + pea protein dispersions increased up to 77.20 µm after the UST treatment. Thus, the effect of UST on the particle size and rheological behavior of the dispersions depended on the fat level. UST-treated dispersions were stable with no visible phase separation or sedimentation upon centrifugation at 4000×g for 30 min (4 °C). Heat treatment and freeze-thaw treatment of UST-treated samples showed stable blends immediately after the treatments, but subsequent centrifugation showed solid separation. Results from the study suggest that UST is a potential technology to produce stable dairy + pea protein liquids foods with different rheological characteristics for diverse applications.
RESUMO
The effects of pressure, temperature, shear, and their interactions on selected quality attributes and stability of milk during ultra-shear technology (UST) were investigated. The UST experiments include pressure (400 MPa) treatment of the milk sample preconditioned at 2 different initial temperatures (25°C and 15°C) and subsequently depressurizing it via a shear valve at 2 flow rates (low: 0.15-0.36 g/s; high: 1.11-1.22 g/s). Raw milk, high-pressure processed (HPP; 400 MPa, ~40°C for 0 and 3 min) and thermal treated (72°C for 15 s) milk samples served as the controls. The effect of different process parameters on milk quality attributes were evaluated using particle size, zeta potential, viscosity, pH, creaming, lipase activity, and protein profile. The HPP treatment did not cause apparent particle size reduction but increased the sample viscosity up to 3.08 mPa·s compared with 2.68 mPa·s for raw milk. Moreover, it produced varied effects on creaming and lipase activity depending on hold time. Thermal treatment induced slight reduction in particle size and creaming as compared with raw milk. The UST treatment at 35°C reduced the effective diameter of sample particles from 3,511.76 nm (raw milk) to 291.45 nm. This treatment also showed minimum relative lipase activity (29.93%) and kept milk stable by preventing creaming. The differential effects of pressure, shear, temperature, and their interactions were evident, which would be useful information for equipment developers and food processors interested in developing improved food processes for dairy beverages.