RESUMO
OBJECTIVES: The primary aim of this cross-sectional study was to investigate the association between prosthesis design and peri-implant mucosa dimensions and morphology. The secondary aim was to investigate associations between mucosal dimensions and the presence of mucositis. MATERIALS AND METHODS: Forty-seven patients with 103 posterior bone level implants underwent clinical and radiographic examination, including cone beam computer tomography and intraoral optical scanning. Three-dimensional models for each implant and peri-implant mucosa were constructed. Vertical mucosa height (TH), horizontal mucosa width at implant platform (TW), and 1.5 mm coronal of the platform (TW1.5), as well as mucosal emergence angle (MEA), deep angle (DA), and total contour angle (TA) were measured at six sites for each implant. RESULTS: There was a consistent correlation between peri-implant mucosa width and height (ß = 0.217, p < 0.001), with the width consistently surpassing height by a factor of 1.4-2.1. All three angles (MEA, DA, TA) were negatively associated with mucosa height (p < 0.001), while DA was negatively associated with mucosa width (TW1.5) (p < 0.001, ß = -0.02, 95% CI: -0.03, -0.01). There was a significant negative association between bleeding on probing (BoP) and mucosa width at platform (OR 0.903, 95% CI: 0.818-0.997, p = 0.043) and 1.5 coronal (OR 0.877, 95% CI: 0.778-0.989, p = 0.033). Implants with less than half sites positive for BoP (0-2/6) had significantly higher mucosa height (OR 3.51, 95% CI: 1.72-7.14, p = 0.001). CONCLUSIONS: Prosthesis design can influence the dimensions of the peri-implant mucosa, with wider emergence profile angles associated with reduced peri-implant mucosa height. In particular, a wider deep angle is associated with reduced mucosa width in posterior sites. Reduced peri-implant mucosa height and width are associated with more signs of inflammation. TRIAL REGISTRATION: Registered in Thai Clinical Trials Registry: http://www.thaiclinicaltrials.org/show/TCTR20220204002.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Implantes Dentários , Mucosa Bucal , Humanos , Feminino , Masculino , Estudos Transversais , Pessoa de Meia-Idade , Implantes Dentários/efeitos adversos , Mucosa Bucal/patologia , Adulto , Idoso , Planejamento de Prótese Dentária , Estomatite/etiologia , Estomatite/patologia , Imageamento Tridimensional , Implantação Dentária Endóssea/métodos , Implantação Dentária Endóssea/efeitos adversosRESUMO
Current research has identified features of the prosthetic design with potential to significantly impact the long-term health of peri-implant tissues, while the choice of prosthetic components is also shown to be critical in an effort to reduce long-term complications of implant therapy. Overcontouring of the prosthesis emergence profile has been associated with marginal bone loss, recession and peri-implantitis, while the mucosal emergence angle is shown to have a strong association with peri-implant tissue inflammation. Further elements of interest include convexity/concavity of the restoration, the prosthetic connection and the different geometric configurations of junctions, as well as the peri-implant tissue dimensions. With regards to implant components, the choice between original and third-party-manufactured components might come with implications, as differences in material and microgeometry might impact precision of fit and overall performance, potentially leading to complications. Scrutiny of the specifications and manufacturing is essential when third-party-manufactured components are considered.The aim of this narrative review was to summarise the current evidence with regards to the restorative features of the implant prosthesis and also the selection of prosthetic components which can have implications for the long-term success of the implant therapy. Furthermore, the review aimed at interpretating current scientific evidence into meaningful strategies and recommendations to implement in clinical practice of implant dentistry.
Assuntos
Implantes Dentários , Planejamento de Prótese Dentária , Humanos , Implantes Dentários/efeitos adversos , Peri-Implantite/etiologia , Peri-Implantite/prevenção & controleRESUMO
STATEMENT OF PROBLEM: The fit of implant-supported prostheses plays an important role in their mechanical and biological stability. Clinically, the prosthetic fit is typically assessed radiographically, but this method relies on the operator's subjective evaluation. Whether available digital tools could optimize the evaluation of the prosthetic fit is uncertain. PURPOSE: The purpose of this in vitro study was to evaluate the influence of an image processing program on the radiographic detection of discrepancies in the active and passive fit of implant-supported prostheses. Two-implant-supported screw-retained prostheses were analyzed by simulating the vertical and horizontal misfits of 3 different implant abutment configurations. MATERIAL AND METHODS: Seven casts were fabricated using 2 internal-connection titanium implants: 1 control; 3 with vertical (V) misfit of 50 µm, 100 µm, 150 µm; and 3 with horizontal (H) misfit of 35 µm, 70 µm, 100 µm. Thirty bar-shaped zirconia frameworks were fabricated and divided into 3 groups (n=10) according to their attachment to 2 engaging (E-E), 2 nonengaging (NE-NE), and engaging and nonengaging (E-NE) titanium bases. Digital parallel periapical radiographs were made of each specimen in the passive and active fit situation on each cast (1-screw test), except for the E-E specimens, which were only seated on the control, H35, and H70 casts because the fit on the remaining casts was poor. The mean gray value (MGV) was measured at the chosen regions of interest on the second implant (side B) using the ImageJ software program. Differences in the MGV measurements between the passive and active conditions were tested using a t test (α=.05) and compared the different misfit levels using analysis of variance (1-way ANOVA), followed by the Tukey HSD test (α=.05). RESULTS: The highest values for the differences between passive and active fit were found for the V150 and H100 misfit simulations (P<.05). Statistical differences between the MGVs were found with some exceptions: the smallest simulated misfits (H35 and V50) revealed statistically significant MGV differences from the highest simulated misfits (V150, H100) and from the H70 in the groups where an engaging component was present (P>.05). In the horizontal misfit group of NE-NE abutment configuration, H70 revealed no significant difference from the control group cast (P>.05). CONCLUSIONS: Measuring MGV differences between passive and active fit could be a promising alternative for detecting 70- to 150-µm gaps in the implant-abutment connection that result from the misfit. However, the procedure was not adequate for detecting <50 µm gaps, cannot be uniformly applied to all types of implant-abutment connections, and requires 2 exposures to X-radiation.
RESUMO
Vesiculation is a process employed by Gram-negative bacteria to release extracellular vesicles (EVs) into the environment. EVs from pathogenic bacteria play functions in host immune modulation, elimination of host defenses, and acquisition of nutrients from the host. Here, we observed EV production of the bacterial speck disease causal agent, Pseudomonas syringae pv. tomato (Pto) DC3000, as outer membrane vesicle release. Mass spectrometry identified 369 proteins enriched in Pto DC3000 EVs. The EV samples contained known immunomodulatory proteins and could induce plant immune responses mediated by bacterial flagellin. Having identified two biomarkers for EV detection, we provide evidence for Pto DC3000 releasing EVs during plant infection. Bioinformatic analysis of the EV-enriched proteins suggests a role for EVs in antibiotic defense and iron acquisition. Thus, our data provide insights into the strategies this pathogen may use to develop in a plant environment. IMPORTANCE The release of extracellular vesicles (EVs) into the environment is ubiquitous among bacteria. Vesiculation has been recognized as an important mechanism of bacterial pathogenesis and human disease but is poorly understood in phytopathogenic bacteria. Our research addresses the role of bacterial EVs in plant infection. In this work, we show that the causal agent of bacterial speck disease, Pseudomonas syringae pv. tomato, produces EVs during plant infection. Our data suggest that EVs may help the bacteria to adapt to environments, e.g., when iron could be limiting such as the plant apoplast, laying the foundation for studying the factors that phytopathogenic bacteria use to thrive in the plant environment.
Assuntos
Vesículas Extracelulares , Solanum lycopersicum , Humanos , Pseudomonas syringae/genética , Pseudomonas syringae/metabolismo , Proteômica , Flagelina/metabolismo , Vesículas Extracelulares/metabolismo , Doenças das Plantas/microbiologia , Proteínas de Bactérias/metabolismoRESUMO
OBJECTIVES: The aim of this study was to investigate the association of the Mucosal Emergence Angle (MEA) with peri-implant tissue mucositis. MATERIAL AND METHODS: Forty-seven patients with 103 posterior bone level implants underwent clinical and radiographic examination. Three-dimensional data from Cone Bean Computer Tomography and Optica Scan were transposed. Three angles were defined: MEA, Deep Angle (DA) and Total Angle (TA) and measured at six sites for each implant. RESULTS: There was a significant correlation between MEA and Bleeding on Probing for all sites with an overall odds ratio of odd ratio 1.07 (95% confidence interval [CI] 1.05-1.09, p < 0.001). Sites with MEA ≥ 30°, 40°, 50°, 60°, and 70° had a higher risk for bleeding with an odds ratio of 3.1, 5, 7.5, 11.4 and 33.55, respectively. When all 6 sites of an implant prostheses had MEA ≥ 40°, the risk of having bleeding at all 6 sites was 9.5 times higher (95% CI 1.70-52.97, p = 0.010). CONCLUSIONS: Maintaining MEA no wider than 30°-40° is advisable, while the aim should be to keep this angle as narrow as clinically feasible. Registered in Thai Clinical Trials Registry: http://www.thaiclinicaltrials.org/show/TCTR20220204002.
Assuntos
Implantes Dentários , Mucosite , Peri-Implantite , Humanos , Implantes Dentários/efeitos adversos , Mucosite/diagnóstico por imagem , Mucosite/etiologiaRESUMO
OBJECTIVES: Recent research has suggested the contour of the prosthesis and the vertical height of the peri-implant mucosa as important parameters that can influence the long term health and stability of the peri-implant tissue. In particular, overcontouring of the prosthesis has been correlated with an increased risk for peri-implantitis, while reduced soft tissue height has been associated with marginal bone loss, recession, and other soft tissue complications. Although these two parameters have been investigated as independent in the current literature, clinical experience points toward a close interrelation between transmucosal tissue height and prosthesis contour angle. It is often found that a reduced vertical height of the implant supracrestal complex is the main reason for overcontouring of the prosthesis. At the same time, achieving a favorable contour of 30o or less is not possible unless the clinician has ensured an adequate vertical height of the soft tissue. The purpose of this short communication is to establish the relation between tissue vertical height and prosthesis contour by utilizing a theoretical geometry equation based on the Pythagorean theorem. In doing so, one can use the dimensions of the implant as well as those of the prosthesis at the mucosal margin to calculate the essential vertical height for achieving a favorable prosthesis contour. CONCLUSIONS: As the treatment plan of the implant supracrestal complex is "top-down," in case of deficient vertical height, subcrestal placement of the implant should be considered to achieve a proper prosthesis contour.
Assuntos
Implantes Dentários , Peri-Implantite , Humanos , Implantação de PróteseRESUMO
This paper is focused on the study of internal stress in thick films used in hybrid microelectronics. Internal stress in thick films arises after firing and during cooling due to the differing coefficients of thermal expansion in fired film and ceramic substrates. Different thermal expansions cause deflection of the substrate and in extreme cases, the deflection can lead to damage of the substrate. Two silver pastes and two dielectric pastes, as well as their combinations, were used for the experiments, and the internal stress in the thick films was investigated using the cantilever method. Further experiments were also focused on internal stress changes during the experiment and on the influence of heat treatment (annealing) on internal stress. The results were correlated with the morphology of the fired thick films. The internal stress in the thick films was in the range of 8 to 21 MPa for metallic films and in the range from 12 to 16 MPa for dielectric films. It was verified that the cantilever method can be successfully used for the evaluation of internal stress in thick films. It was also found that the values of deflection and internal stress are not stable after firing, and they can change over time, mainly for metallic thick films.
RESUMO
STATEMENT OF PROBLEM: Prosthesis fit is 1 of the main factors influencing the success and survival of an implant-supported screw-retained restoration. However, scientific validation of the performance of engaging and nonengaging components in a fixed partial denture (FPD) and the effect of their combinations on the fit of FPDs is lacking. The screw resistance test has been used for the fit assessment of screw-retained FPDs. However, objective assessments by using analog and digital devices are now available. PURPOSE: The purpose of this in vitro study was to investigate the effect of engaging and nonengaging components on the fit of screw-retained frameworks, supported by 2 conical connection implants with simulated vertical and horizontal misfits, by performing 2 different screw resistance tests (analog and digital). MATERIAL AND METHODS: Thirty 2-implant-supported bar-shaped zirconia frameworks cemented on two 2-mm titanium bases were fabricated and divided into 3 groups (n=10) according to different abutment combinations: both engaging, engaging and nonengaging, both nonengaging. The fit of each framework was tested on the control cast and on 6 definitive casts simulating 50-, 100-, and 150-µm vertical and 35-, 70-, and 100-µm horizontal misfit levels. The abutment screws were tightened on each implant, and the screw rotation angle was measured both digitally, with a custom-made digital torque wrench and a computer software program, and conventionally, with an analog torque wrench and protractor. Clearly ill-fitting specimens were excluded. The data were statistically analyzed by 1-way analysis of variance (ANOVA) and the Tukey post hoc test (α=.05). RESULTS: Both engaging specimens on the 100-µm horizontal misfit group and on all vertical misfit groups were clearly ill-fitting and excluded. Statistically significant differences among groups with different combinations of abutments were found (P<.05). The engaging abutments had a higher angle of rotation than the nonengaging abutments on all casts. In the horizontal misfit group, both engaging specimens had the highest angle of rotation, followed by engaging and nonengaging and both engaging specimens. In the vertical misfit group, the engaging and nonengaging specimens had the highest angle of rotation on the side of the engaging abutment. The angle of rotation increased with the increasing level of misfit. CONCLUSIONS: Both nonengaging frameworks showed superiority in misfit tolerance, as the angle of rotation was lower than that of the engaging and nonengaging and both engaging frameworks. Conventional and digital torque wrenches showed similar results.
RESUMO
Bacterial extracellular vesicles (EVs) are cytosol-containing membrane spheres providing a chassis for the removal and delivery of cargoes in a highly dynamic and cue-responsive manner. EVs play important roles in cell-to-cell communication, including the dialogue between recipient microbial and plant cells. Bacterial EVs are well-studied in the medical field, but their relevance for plant infection is only now being recognized. Recent studies have demonstrated the role of EVs from phytobacteria in modulating plant immunity and the outcome of disease or in symbiosis. In this review, we highlight the composition of EVs and discuss their role in the interaction with plants. Knowledge of EV composition and functions will aid their use in biotechnology and agriculture.
Assuntos
Vesículas Extracelulares , Plantas , SimbioseRESUMO
This paper is focused on a new copper-nickel thick film resistive paste which was designed and experimentally developed for the realization of low-ohmic power resistors. This copper-nickel paste has been designed for use in combination with thick printed copper conductors and in comparison with conventional ruthenium-based thick film resistor pastes allows firing in a nitrogen protective atmosphere. The copper-nickel paste was prepared from copper and nickel microparticles, glass binder particles and a combination of organic solvents optimized for its firing in a nitrogen atmosphere. This paper covers a detailed description of copper-nickel paste composition and its thermal properties verified by simultaneous thermal analysis, a description of the morphology of dried and fired copper-nickel films, as well as the electrical parameters of the final printed resistors. It has been proven by electron microscopy with element distribution analysis that copper and nickel microparticles diffused together during firing and created homogenous copper-nickel alloy film. This film shows a low temperature coefficient of resistance ±45 × 0-6 K-1 and low sheet resistance value 45 mΩ/square. It was verified that formulated copper-nickel paste is nitrogen-fireable and well-compatible with thick printed copper pastes. This combination allows the realization of power substrates with directly integrated low-ohmic resistors.
RESUMO
OBJECTIVE: The aim of this review was to investigate the evidence correlating the emergence profile (EP) and emergence angle (EA), peri-implant tissue height, implant neck design, abutment and/or prosthesis material, retention and connection types with risk of peri-implant mucositis and peri-implantitis. METHODS: Seven focus questions were identified, and seven electronic search queries were conducted in PubMed. Human studies reporting on bleeding on probing, probing depth or case definitions of peri-implant mucositis and peri-implantitis were included. RESULTS: Emerging evidence with bone-level implants suggests a link between EA combined with convex EP and peri-implantitis. Depth of the peri-implant sulcus of ≥3 mm is shown to be reducing the effectiveness of treatment of established peri-implant mucositis. Modification of the prosthesis contour is shown to be an effective supplement of the anti-infective treatment of peri-implant mucositis. Limited evidence points to no difference with regard to the risk for peri-implant mucositis between tissue- and bone-level implants, as well as the material of the abutment or the prosthesis. Limited evidence suggests the use or not of prosthetic abutments in external connections and does not change the risk for peri-implantitis. Literature with regard to prosthesis retention type and risk for peri-implantitis is inconclusive. CONCLUSIONS: Limited evidence indicates the involvement of EA, EP, sulcus depth and restricted accessibility to oral hygiene in the manifestation and/or management of peri-implant mucositis/peri-implantitis. Conclusions are limited by the lack of consensus definitions and validated outcomes measures, as well as diverse methodological approaches. Purpose-designed studies are required to clarify current observations.
Assuntos
Implantes Dentários , Mucosite , Peri-Implantite , Estomatite , Implantes Dentários/efeitos adversos , Humanos , Mucosite/etiologia , Higiene Bucal , Peri-Implantite/etiologia , Estomatite/etiologiaRESUMO
Emerging evidence implies significant interrelations between the condition of the peri-implant tissues and the implant-abutment-prosthesis complex. A new paradigm for studying the peri-implant tissues in close interrelation with the implant-abutment-prosthesis complex in the presence of the oral biofilm is essential. The aims of this paper are to introduce the concept of the "implant supracrestal complex" (ISC) and to describe the critical elements that define it as a unique anatomical and functional system of human tissues, mechanical components, and oral bacteria/biofilm. This paper reviews recent evidence to identify the impact of design features on short-term clinical outcomes and long-term health of the peri-implant bone and soft tissues. Prosthetic-driven implant placement is a prerequisite for proper ISC design, which in turn can indirectly influence the structure and dimensions of the peri-implant soft tissues. Design features of the implant-prosthesis-abutment complex, such as the emergence profile, emergence angle, and cervical margin, as well as the design of the implant-abutment and abutment-prosthesis junctions and their locations in relation to the tissues of the ISC, can have a significant impact on the maintenance of stable and healthy peri-implant tissues in the long term.
Assuntos
Dente Suporte , Implantes Dentários , Projeto do Implante Dentário-Pivô , HumanosRESUMO
Phosphatidylinositol-4-kinases ß1 and ß2 (PI4Kß1/PI4Kß2), which are responsible for phosphorylation of phosphatidylinositol to phosphatidylinositol-4-phosphate, have important roles in plant vesicular trafficking. Moreover, PI4Kß1/PI4Kß2 negatively regulates biosynthesis of phytohormone salicylic acid (SA), a key player in plant immune responses. The study focused on the effect of PI4Kß1/PI4Kß2 deficiency and SA level on the proteome of microsomal fraction. For that purpose we used four Arabidopsis thaliana genotypes: wild type; double mutant with impaired function of PI4Kß1/PI4Kß2 (pi4kß1/pi4kß2) exhibiting high SA level; sid2 mutant with impaired SA biosynthesis depending on the isochorismate synthase 1 and triple mutant sid2/pi4kß1/pi4kß2. We identified 1797 proteins whose levels were changed between genotypes. We showed that increased SA concentration affected the levels of 473 proteins. This includes typical SA pathway markers but also points to connections between SA pathway and clathrin-independent endocytosis (flotillins) and exocytosis/protein secretion (syntaxins, tetraspanin) to be investigated in future. In contrast to SA, the absence of PI4Kß1/PI4Kß2 itself affected only 27 proteins. Among them we identified CERK1, a receptor for chitin. Although PI4Kß1/PI4Kß2 deficiency itself did not have a substantial impact on the proteome of the microsomal fraction, our data clearly show that it enhances proteome changes when SA pathway is modulated in parallel.
Assuntos
Proteínas de Arabidopsis , Arabidopsis , 1-Fosfatidilinositol 4-Quinase/genética , 1-Fosfatidilinositol 4-Quinase/metabolismo , Arabidopsis/genética , Arabidopsis/metabolismo , Proteínas de Arabidopsis/genética , Proteínas de Arabidopsis/metabolismo , Regulação da Expressão Gênica de Plantas , Fosfatidilinositóis , Proteoma , Ácido SalicílicoRESUMO
PURPOSE: To investigate the impact of different extents of misfit between a restoration and the supporting implant on veneer fractures in screw-retained implant-supported metal-ceramic fixed dental prostheses (FDPs). MATERIALS AND METHODS: A finite element analysis (FEA) model of a five-unit screw-retained metal-ceramic FDP supported by three implants was constructed, replicating a previous in vitro study. Eight different gap configurations at the single terminal implant, ranging from 0 to 150 µm, were tested. All setups were tested after clamping and with a load of 200 N applied. Maximum stress within the FDP was calculated. RESULTS: The stress increased with each increase in misfit size above 30 µm, with the relationship between gap size and stress being linear up to 100-µm misfit. Above 100 µm, the stress increase accelerated. The stress pattern within the FDP changed with increasing gap size, confirming the findings of a previously conducted in vitro experiment for a misfit of 150 µm. CONCLUSION: The results of the FEA were in agreement with in vitro observations, validating the predictive value of FEA for technical complications. A misfit between an FDP and a supporting implant implies an increased risk of veneer fracture. Above a misfit of 30 µm, the stress levels are likely to be high enough to cause veneer fracture, and the risk increases disproportionately for misfit above 100 µm.
Assuntos
Implantes Dentários , Porcelana Dentária , Cerâmica , Prótese Dentária Fixada por Implante , Falha de Restauração Dentária , Análise de Elementos FinitosRESUMO
The actin cytoskeleton is widely involved in plant immune responses. The majority of studies show that chemical disruption of the actin cytoskeleton increases plant susceptibility to pathogen infection. Similarly, several pathogens have adopted this as a virulence strategy and produce effectors that affect cytoskeleton integrity. Such effectors either exhibit actin-depolymerizing activity themselves or prevent actin polymerization. Is it thus possible for plants to recognize the actin's status and launch a counterattack? Recently we showed that chemical depolymerization of actin filaments can trigger resistance to further infection via the specific activation of salicylic acid (SA) signalling. This is accompanied by several defence-related, but SA-independent, effects (e.g. callose deposition, gene expression), relying on vesicular trafficking and phospholipid metabolism. These data suggest that the role of actin in plant-pathogen interactions is more complex than previously believed. It raises the question of whether plants have evolved a mechanism of sensing pathological actin disruption that eventually triggers defence responses. If so, what is the molecular basis of it? Otherwise, why does actin depolymerization specifically influence SA content but not any other phytohormone? Here we propose an updated model of actin's role in plant-microbe interactions and suggest some future directions of research to be conducted in this area.
Assuntos
Actinas , Ácido Salicílico , Citoesqueleto de Actina , Doenças das Plantas , Reguladores de Crescimento de Plantas , PlantasRESUMO
BACKGROUND AND AIMS: We have recently shown that an Arabidopsis thaliana double mutant of type III phosphatidylinositol-4-kinases (PI4Ks), pi4kß1ß2, constitutively accumulated a high level of salicylic acid (SA). By crossing this pi4kß1ß2 double mutant with mutants impaired in SA synthesis (such as sid2 impaired in isochorismate synthase) or transduction, we demonstrated that the high SA level was responsible for the dwarfism phenotype of the double mutant. Here we aimed to distinguish between the SA-dependent and SA-independent effects triggered by the deficiency in PI4Kß1 and PI4Kß2. METHODS: To achieve this we used the sid2pi4kß1ß2 triple mutant. High-throughput analyses of phytohormones were performed on this mutant together with pi4kß1ß2 and sid2 mutants and wild-type plants. Responses to pathogens, namely Hyaloperonospora arabidopsidis, Pseudomonas syringae and Botrytis cinerea, and also to the non-host fungus Blumeria graminis, were also determined. Callose accumulation was monitored in response to flagellin. KEY RESULTS: We show here the prominent role of high SA levels in influencing the concentration of many other tested phytohormones, including abscisic acid and its derivatives, the aspartate-conjugated form of indole-3-acetic acid and some cytokinins such as cis-zeatin. We show that the increased resistance of pi4kß1ß2 plants to the host pathogens H. arabidopsidis, P. syringae pv. tomato DC3000 and Bothrytis cinerea is dependent on accumulation of high SA levels. In contrast, accumulation of callose in pi4kß1ß2 after flagellin treatment was independent of SA. Concerning the response to Blumeria graminis, both callose accumulation and fungal penetration were enhanced in the pi4kß1ß2 double mutant compared to wild-type plants. Both of these processes occurred in an SA-independent manner. CONCLUSIONS: Our data extensively illustrate the influence of SA on other phytohormone levels. The sid2pi4kß1ß2 triple mutant revealed the role of PI4Kß1/ß2 per se, thus showing the importance of these enzymes in plant defence responses.
Assuntos
1-Fosfatidilinositol 4-Quinase , Proteínas de Arabidopsis/genética , Arabidopsis , Regulação da Expressão Gênica de Plantas , Mutação , Doenças das Plantas , Pseudomonas syringae , Ácido SalicílicoRESUMO
Being natural plant antimicrobials, saponins have potential for use as biopesticides. Nevertheless, their activity in plant-pathogen interaction is poorly understood. We performed a comparative study of saponins' antifungal activities on important crop pathogens based on their effective dose (EC50) values. Among those saponins tested, aescin showed itself to be the strongest antifungal agent. The antifungal effect of aescin could be reversed by ergosterol, thus suggesting that aescin interferes with fungal sterols. We tested the effect of aescin on plant-pathogen interaction in two different pathosystems: Brassica napus versus (fungus) Leptosphaeria maculans and Arabidopsis thaliana versus (bacterium) Pseudomonas syringae pv tomato DC3000 (Pst DC3000). We analyzed resistance assays, defense gene transcription, phytohormonal production, and reactive oxygen species production. Aescin activated B. napus defense through induction of the salicylic acid pathway and oxidative burst. This defense response led finally to highly efficient plant protection against L. maculans that was comparable to the effect of fungicides. Aescin also inhibited colonization of A. thaliana by Pst DC3000, the effect being based on active elicitation of salicylic acid (SA)-dependent immune mechanisms and without any direct antibacterial effect detected. Therefore, this study brings the first report on the ability of saponins to trigger plant immune responses. Taken together, aescin in addition to its antifungal properties activates plant immunity in two different plant species and provides SA-dependent resistance against both fungal and bacterial pathogens.
RESUMO
The phytohormone salicylic acid (SA) has a crucial role in plant physiology. Its role is best described in the context of plant response to pathogen attack. During infection, SA is rapidly accumulated throughout the green tissues and is important for both local and systemic defences. However, some genetic/metabolic variations can also result in SA overaccumulation in plants, even in basal conditions. To date, more than forty Arabidopsis thaliana mutants have been described as having enhanced endogenous SA levels or constitutively activated SA signalling pathways. In this study, we established a collection of mutants containing different SA levels due to diverse genetic modifications and distinct gene functions. We chose prototypic SA-overaccumulators (SA-OAs), such as bon1-1, but also "non-typical" ones such as exo70b1-1; the selection of OA is accompanied by their crosses with SA-deficient lines. Here, we extensively studied the plant development and SA level/signalling under various growth conditions in soil and in vitro, and showed a strong negative correlation between rosette size, SA content and PR1/ICS1 transcript signature. SA-OAs (namely cpr5, acd6, bon1-1, fah1/fah2 and pi4kß1ß2) had bigger rosettes under high light conditions, whereas WT plants did not. Our data provide new insights clarifying a link between SA and plant behaviour under environmental stresses. The presented SA mutant collection is thus a suitable tool to shed light on the mechanisms underlying trade-offs between growth and defence in plants.
Assuntos
Arabidopsis/genética , Arabidopsis/metabolismo , Regulação da Expressão Gênica de Plantas , Mutação , Doenças das Plantas/genética , Ácido Salicílico/metabolismo , Arabidopsis/microbiologia , Proteínas de Arabidopsis/genética , Proteínas de Arabidopsis/metabolismo , Interações Hospedeiro-Patógeno , Desenvolvimento Vegetal/genética , Doenças das Plantas/microbiologia , Reguladores de Crescimento de Plantas/metabolismo , Transdução de Sinais/genéticaRESUMO
The integrity of the actin cytoskeleton is essential for plant immune signalling. Consequently, it is generally assumed that actin disruption reduces plant resistance to pathogen attack. Here, we demonstrate that actin depolymerization induced a dramatic increase in salicylic acid (SA) levels in Arabidopsis thaliana. Transcriptomic analysis showed that the SA pathway was activated due to the action of isochorismate synthase (ICS). The effect was also confirmed in Brassica napus. This raises the question of whether actin depolymerization could, under particular conditions, lead to increased resistance to pathogens. Thus, we explored the effect of pretreatment with actin-depolymerizing drugs on the resistance of Arabidopsis thaliana to the bacterial pathogen Pseudomonas syringae, and on the resistance of an important crop Brassica napus to its natural fungal pathogen Leptosphaeria maculans. In both pathosystems, actin depolymerization activated the SA pathway, leading to increased plant resistance. To our best knowledge, we herein provide the first direct evidence that disruption of the actin cytoskeleton can actually lead to increased plant resistance to pathogens, and that SA is crucial to this process.
Assuntos
Actinas/metabolismo , Arabidopsis/metabolismo , Brassica napus/metabolismo , Ácido Salicílico/metabolismo , Transdução de Sinais/fisiologia , Arabidopsis/microbiologia , Proteínas de Arabidopsis/metabolismo , Ascomicetos/patogenicidade , Brassica napus/microbiologia , Regulação da Expressão Gênica de Plantas/fisiologia , Transferases Intramoleculares/metabolismo , Doenças das Plantas/microbiologia , Pseudomonas syringae/patogenicidadeRESUMO
Recognition of pathogen-associated molecular patterns (PAMPs) is crucial for plant defence against pathogen attack. The best characterized PAMP is flg22, a 22 amino acid conserved peptide from flagellin protein. In Arabidopsis thaliana, flg22 is recognized by the flagellin sensing 2 (FLS2) receptor. In this study, we focused on biotic stress responses triggered by flg22 after exposure to temporary heat stress (HS). It is important to study the reactions of plants to multiple stress conditions because plants are often exposed simultaneously to a combination of both abiotic and biotic stresses. Transient early production of reactive oxygen species (ROS) is a well-characterized response to PAMP recognition. We demonstrate the strong reduction of flg22-induced ROS production in A. thaliana after HS treatment. In addition, a decrease in FLS2 transcription and a decrease of the FLS2 presence at the plasma membrane are shown after HS. In summary, our data show the strong inhibitory effect of HS on flg22-triggered events in A. thaliana. Subsequently, temporary HS strongly decreases the resistance of A. thaliana to Pseudomonas syringae. We propose that short exposure to high temperature is a crucial abiotic stress factor that suppresses PAMP-triggered immunity, which subsequently leads to the higher susceptibility of plants to pathogens.