Formal Synthesis of (+)-Sinefungin by Way of Sequential Asymmetric Metal Catalysis.

Here, we report a de novo approach toward (+)-sinefungin, a potent inhibitor of the physiological methyl transfer process. A key feature is represented by the sequential metal catalysis combining Pd-catalyzed hydroalkoxylation and ring-rearrangement metathesis. The unique advantage of the method is highlighted by the unprecedented complete control of the C6 stereocenter.

Development and Evaluation of Self-Microemulsifying Drug Delivery System for Improving Oral Absorption of Poorly Water-Soluble Olaparib.

The purpose of this study is to develop and evaluate a self-microemulsifying drug delivery system (SMEDDS) to improve the oral absorption of poorly water-soluble olaparib. Through the solubility test of olaparib in various oils, surfactants and co-surfactants, pharmaceutical excipients were selected. Self-emulsifying regions were identified by mixing the selected materials at various ratios, and a pseudoternary phase diagram was constructed by synthesizing these results. The various physicochemical properties of microemulsion incorporating olaparib were confirmed by investigating the morphology, particle size, zeta potential, drug content and stability. In addition, the improved dissolution and absorption of olaparib were also confirmed through a dissolution test and a pharmacokinetic study. An optimal microemulsion was generated in the formulation of Capmul® MCM 10%, Labrasol® 80% and PEG 400 10%. The fabricated microemulsions were well-dispersed in aqueous solutions, and it was also confirmed that they were maintained well without any problems of physical or chemical stability. The dissolution profiles of olaparib were significantly improved compared to the value of powder. Associated with the high dissolutions of olaparib, the pharmacokinetic parameters were also greatly improved. Taken together with the results mentioned above, the microemulsion could be an effective tool as a formulation for olaparib and other similar drugs.

A Modified Wet Transfer Method for Eliminating Interfacial Impurities in Graphene.

Graphene has immense potential as a material for electronic devices owing to its unique electrical properties. However, large-area graphene produced by chemical vapor deposition (CVD) must be transferred from the as-grown copper substrate to an arbitrary substrate for device fabrication. The conventional wet transfer technique, which uses FeCl3 as a Cu etchant, leaves microscale impurities from the substrate, and the etchant adheres to graphene, thereby degrading its electrical performance. To address this limitation, this study introduces a modified transfer process that utilizes a temporary UV-treated SiO2 substrate to adsorb impurities from graphene before transferring it onto the final substrate. Optical microscopy and Raman mapping confirmed the adhesion of impurities to the temporary substrate, leading to a clean graphene/substrate interface. The retransferred graphene shows a reduction in electron-hole asymmetry and sheet resistance compared to conventionally transferred graphene, as confirmed by the transmission line model (TLM) and Hall effect measurements (HEMs). These results indicate that only the substrate effects remain in action in the retransferred graphene, and most of the effects of the impurities are eliminated. Overall, the modified transfer process is a promising method for obtaining high-quality graphene suitable for industrial-scale utilization in electronic devices.

Paliperidone-Cation Exchange Resin Complexes of Different Particle Sizes for Controlled Release.

This study aimed to develop electrolyte complexes of paliperidone (PPD) with various particle sizes using cation-exchange resins (CERs) to enable controlled release (both immediate and sustained release). CERs of specific particle size ranges were obtained by sieving commercial products. PPD-CER complexes (PCCs) were prepared in an acidic solution of pH 1.2 and demonstrated a high binding efficiency (>99.0%). PCCs were prepared with CERs of various particle sizes (on average, 100, 150, and 400 µm) at the weight ratio of PPD to CER (1:2 and 1:4). Physicochemical characterization studies such as Fourier-transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy between PCCs (1:4) and physical mixtures confirmed PCC formation. In the drug release test, PPD alone experienced a complete drug release from PCC of >85% within 60 min and 120 min in pH 1.2 and pH 6.8 buffer solutions, respectively. Alternatively, PCC (1:4) prepared with CER (150 µm) formed spherical particles and showed an almost negligible release of PPD in pH 1.2 buffer (<10%, 2 h) while controlling the release in pH 6.8 buffer (>75%, 24 h). The release rate of PPD from PCCs was reduced with the increase in CER particle size and CER ratio. The PCCs explored in this study could be a promising technology for controlling the release of PPD in a variety of methods.

The Development of Super-Saturated Rebamipide Eye Drops for Enhanced Solubility, Stability, Patient Compliance, and Bioavailability.

The present study aimed to develop clear aqueous rebamipide (REB) eye drops to enhance solubility, stability, patient compliance, and bioavailability. For the preparation of a super-saturated 1.5% REB solution, the pH-modification method using NaOH and a hydrophilic polymer was employed. Low-viscosity hydroxypropyl methylcellulose (HPMC 4.5cp) was selected and worked efficiently to suppress REB precipitation at 40 °C for 16 days. The additionally optimized eye drops formulation (F18 and F19) using aminocaproic acid and D-sorbitol as a buffering agent and an osmotic agent, respectively, demonstrated long-term physicochemical stability at 25 °C and 40 °C for 6 months. The hypotonicity (<230 mOsm) for F18 and F19 noticeably extended the stable period, since the pressure causing the REB precipitation was relieved compared to the isotonic. In the rat study, the optimized REB eye drops showed significantly long-lasting pharmacokinetic results, suggesting the possibility of reducing daily administration times and increasing patient compliance (0.50- and 0.83-times lower Cmax and 2.60- and 3.64-times higher exposure in the cornea and aqueous humor). In conclusion, the formulations suggested in the present study are promising candidates and offer enhanced solubility, stability, patient compliance, and bioavailability.

Preparation and Characterization of Pazopanib Hydrochloride-Loaded Four-Component Self-Nanoemulsifying Drug Delivery Systems Preconcentrate for Enhanced Solubility and Dissolution.

The aim of this study was to develop a four-component self-nanoemulsifying drug delivery system (FCS) to enhance the solubility and dissolution of pazopanib hydrochloride (PZH). In the solubility test, PZH showed a highly pH-dependent solubility (pH 1.2 > water >> pH 4.0 and pH 6.8) and was solubilized at 70 °C in the order Kollisolv PG (5.38%, w/w) > Kolliphor RH40 (0.49%) > Capmul MCM C10 (0.21%) and Capmul MCM C8 (0.19%), selected as the solubilizer, the surfactant, and the oils, respectively. In the characterization of the three-component SNEDDS (TCS) containing Kolliphor RH40/Capmul MCM C10, the particle size of dispersion was very small (<50 nm) and the PZH loading was 0.5% at the weight ratio of 9/1. In the characterization of FCS containing additional Kollisolv PG to TCS, PZH loading was increased to 5.30% without any PZH precipitation, which was 10-fold higher compared to the TCS. The optimized FCS prepared with the selected formulation (Kolliphor RH40/Capmul MCM C10/Kollisolv PG) showed a consistently complete and high dissolution rate (>95% at 120 min) at four different pHs with 1% polysorbate 80, whereas the raw PZH and Kollisolv PG solution showed a pH-dependent poor dissolution rate (about 40% at 120 min), specifically at pH 6.8 with 1% polysorbate 80. In conclusion, PZH-loaded FCS in this work demonstrated enhanced solubility and a consistent dissolution rate regardless of medium pH.

Polyhydroxyalkanoate Decelerates the Release of Paclitaxel from Poly(lactic-co-glycolic acid) Nanoparticles.

Biodegradable nanoparticles (NPs) are preferred as drug carriers because of their effectiveness in encapsulating drugs, ability to control drug release, and low cytotoxicity. Although poly(lactide co-glycolide) (PLGA)-based NPs have been used for controlled release strategies, they have some disadvantages. This study describes an approach using biodegradable polyhydroxyalkanoate (PHA) to overcome these challenges. By varying the amount of PHA, NPs were successfully fabricated by a solvent evaporation method. The size range of the NPS ranged from 137.60 to 186.93 nm, and showed zero-order release kinetics of paclitaxel (PTX) for 7 h, and more sustained release profiles compared with NPs composed of PLGA alone. Increasing the amount of PHA improved the PTX loading efficiency of NPs. Overall, these findings suggest that PHA can be used for designing polymeric nanocarriers, which offer a potential strategy for the development of improved drug delivery systems for sustained and controlled release.

Palladium-Catalyzed Asymmetric Decarboxylative Addition of ß-Keto Acids to Heteroatom-Substituted Allenes.

The Pd-catalyzed asymmetric addition reaction of ß-keto acids to heteroatom-substituted allene is reported. This reaction generates ß-substituted ketones in an asymmetric manner through a branch-selective decarboxylative allylation pathway. The reaction accommodates various alkoxyallenes as well as amidoallenes.

Screening of Electrolyte Complexes Formed Between Dextran Sulfate and Amine Structures of Small-Molecule Drugs.

Formation of an electrolyte complex using the electrostatic interactions between a polyanionic polymer and a cationic drug is a simple and efficient method of preparing a colloidal drug carrier system. Dextran sulfate, with a negatively charged sulfate group, was reacted in an acetate buffer solution of pH 3 with positively charged 1° amine, 2° amine, 3° amine, piperazine, and piperidine structures from 24 small-molecule drugs. The electrolyte complex was formed from 15 drugs, 63% of those tested. The tendency to form the electrolyte complex was in the order of piperazine and piperidine >3° amine >>2° amine. The drugs with the 1° amine structure failed to form an electrolyte complex. The mean particle sizes were in the range of 50-740 nm, and most of them showed a submicron colloidal dispersion of <400 nm. Regarding drug encapsulation efficiency (%), 11 drugs with piperazine, piperidine, and 3° amine structures showed 60-98% efficiency, which was fairly high. The results suggest that directly forming the electrolyte complex with dextran sulfate yields promising structural attributes as a submicron colloidal drug carrier system.

Surface Activity and Emulsifying Effect of Non-Toxic Starch Nanocrystal.

The purpose of this study is to investigate the surface activity of starch nanocrystals (SNC), material derived from starch, and confirm their usefulness as a surfactant. In order to evaluate the surface activity, the surface tension change of suspended SNC solution via the Wilhelmy plate method was measured and the values were compared with various synthetic surfactants. The effect of SNC as emulsifier was evaluated on emulsion formation and physical stability. The surface tension of the SNC-dispersed solution was decreased while its concentration was increased. When the 5.0% (w/v) of SNC was added, the surface tension was decreased from 70.3 to 49.5 mN/m. It was confirmed that the physical stability of the emulsion prepared by adding the SNC was improved compared to that of surface inactivity material (PEG 400). The phase separation was observed within 1 hour after preparation of the emulsion containing PEG 400, but the emulsion containing SNC was stable for 5 hours or more. To summarize this study, SNC, a natural-derived and non-toxic material, exhibits sufficient surface activity, thereby confirming the possibility of being applied to the food and pharmaceutical industry.

Topical Delivery of Nanosized Hydroxycitric Acid Enriched Extract-Loaded Ethosomes for Suppression of Lipid Droplet Deposition.

The aim of this study was to improve the skin accumulation of hydroxycitric acid by using ethosomes with nanosize. We fabricated nanosized ethosome for the topical delivery of hydrophilic hydroxycitric acid and evaluated their physical properties and furthermore cytotoxicity. As results, in cell-based experiments, the use of ethosomes encapsulating hydroxycitric acid extract reduced the lipid droplet deposition in differentiated adipocytes, which was visualized by Oil Red O staining assay and also quantitatively measured by a triglyceride assay. The observed reduction in lipid droplet deposition occurred in a hydroxycitric acid extract concentration-dependent manner. In addition, the high accumulation of hydroxycitric acid in murine skin (66.28%) was observed following treatment with hydroxycitric acid extract-loaded ethosomes compared with treatment with hydroxycitric acid alone (1.19%) without ethosome as a nanocarrier. Based on these results, our findings showed that nanosized ethosomes improved the topical delivery of hydroxycitric acid and thus reduced lipid droplet deposition in adipocytes.

Preparation and Evaluation of Nanostructured Lipid Carrier for Topical Delivery of Velutin: Synthetic Tyrosinase Inhibitor.

The purpose of this study is to produce nanostructured lipid carrier (NLC) that can solubilize poorly water-soluble velutin and verify an improved tyrosinase synthesis inhibition. A solubility test for velutin was conducted. Cetyl palmitate and caprylic/capric triglyceride were selected as solubilizer. The lipid matrix was produced using the ultrasound dispersion method. The morphology and size distribution of the produced NLC was analyzed through scanning electron microscopy (SEM) and dynamic light scattering (DLS), and the release and tyrosinase inhibition of velutin was evaluated through the Franz diffusion cell method and tyrosinase inhibition assay. Lipid matrix nanoparticles showed an average size of approximately 250 nm and polydispersity of 0.2, and it was confirmed that the velutin incorporated within nanoparticles sustained release at a constant rate over 36 hours. Due to extremely low aqueous solubility, the tyrosinase synthesis inhibition of velutin suspension was 0%, and the value of velutin incorporated within the NLC formulation was greatly improved 56.5% (40 µg/mL). As a result, it was verified that lipid-based NLC nanoparticles are an efficient formulation for the topical delivery of poorly water-soluble flavonoids such as velutin.

Extracellular Vesicles: The Next Frontier in Regenerative Medicine and Drug Delivery.

Extracellular vesicles (EVs) are nanosized membrane particles secreted by cells to convey intercellular information. In recent years, EVs have enticed scientists owing to their prevalent distribution, enormous possibility as therapeutic aspirants, and probable roles as disease biomarkers. As natural transporters in the endogenous communication system, they play a role in protein, lipid, miRNA, mRNA, and DNA transport. In this chapter, we recapitulate the roles of EVs in the vast field of regenerative medicine. This summary mainly describes the potential roles of EVs in the regeneration of extensively studied organs or tissues, such as the heart, kidney, lung, liver, skin, and hair. Furthermore, EV can also transport drugs and corroborate their uptake by target cells through endocytosis; therefore, this chapter also highlights the use of EVs in the field of drug delivery.

Topical Delivery of Coenzyme Q10-Loaded Microemulsion for Skin Regeneration.

The aim of this study was to develop a coenzyme Q10 (CoQ10) microemulsion system with improved solubility, penetration, and wound healing efficacy. Based on the pseudo-ternary diagram, microemulsions containing isopropyl myristate (IPM), Cremophor EL®, and Transcutol® HP were selected and confirmed to be nanosized (<20 nm) and thermodynamically stable based on the dilution and thermodynamic stability tests. The CoQ10-loaded microemulsion with a surfactant/co-surfactant (S/CoS) ratio of 2:1 (w/w %) demonstrated a higher permeation efficacy compared to microemulsions with S/CoS ratio of 3:1 or 4:1 (w/w %). Additionally, the CoQ10-loaded microemulsion with an S/CoS ratio of 2:1 demonstrated a relatively rapid wound healing effect in keratinocytes and fibroblasts. Overall, these data suggest that a microemulsion based on IPM, Cremophor EL®, and Transcutol® HP could be an effective vehicle for the topical administration of CoQ10 and could be utilized for the application of other therapeutic agents that have difficulty in penetrating the skin.

Development of 20(S)-Protopanaxadiol-Loaded SNEDDS Preconcentrate Using Comprehensive Phase Diagram for the Enhanced Dissolution and Oral Bioavailability.

In this study, we aimed to develop a 20(S)-protopanaxadiol (PPD)-loaded self-nanoemulsifying drug delivery system (SNEDDS) preconcentrate (PSP) using comprehensive ternary phase diagrams for enhanced solubility, physical stability, dissolution, and bioavailability. Capmul MCM C8 and Capryol 90 were selected as the oil phase owing to the high solubility of PPD in these vehicles (>15%, w/w). Novel comprehensive ternary phase diagrams composed of selected oil, surfactant, and PPD were constructed, and the solubility of PPD and particle size of vehicle was indicated on them for the effective determination of PSP. PSPs were confirmed via particle size distribution, physical stability, and scanning electron microscope (SEM) with the dispersion of water. The optimized PSP (CAPRYOL90/Kolliphor EL/PPD = 54/36/10, weight%) obtained from the six possible comprehensive ternary phase diagrams showed a uniform nanoemulsion with the particle size of 125.07 ± 12.56 nm without any PPD precipitation. The PSP showed a dissolution rate of 94.69 ± 2.51% in 60 min at pH 1.2, whereas raw PPD showed negligible dissolution. In oral pharmacokinetic studies, the PSP group showed significantly higher Cmax and AUCinf values (by 1.94- and 1.81-fold, respectively) than the raw PPD group (p < 0.05). In conclusion, the PSP formulation with outstanding solubilization, dissolution, and in-vivo oral bioavailability could be suggested using effective and comprehensive ternary phase diagrams.

Preparation and Characterization of Tenofovir Disoproxil-Loaded Enteric Microparticle.

Tenofovir disoproxil (TD) has narrow absorption site mostly in upper intestinal tract where tenofovir rapidly decomposes. The aim of this work was to prepare and evaluate tenofovir disoproxil-loaded enteric microparticles (TDEMs) for the enhanced duodenal delivery. TDEMs were composed of TD, eudragit L-100 (EL) and ethyl cellulose (EC) as release-controlling polymers. For the physicochemical characterization, TDEMs were evaluated in terms of encapsulation efficiency (EE%), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR). The dissolution test was also performed while continuously changing the medium pH. The EE% of TD in TDEMs was good and more than 90%. The EC and EL formed a physically mixed structure and maintained their respective properties in TDEMs as confirmed by SEM image and FT-IR analysis. Combination of EL and EC gave higher enteric properties to TDEMs than the single use of EL or EC. The optimized TDEM (TD/EL/EC = 0.2/1/1, w/w/w ratio) yielded mean dissolution rate less than 10% in 1 h at pH 1.2, but completed dissolution with a dissolution more than 85% within 1 h at pH 6.5. Thus, the suggested TDEM would be promising enteric microparticles for the intensive delivery of TD to the duodenum.

Optimization of Hydroxypropyl Methylcellulose and Dextrin in Development of Dried Nanosuspension for Poorly Water-Soluble Drug.

The purpose of this study is to identify the effects of a stabilizer and matrix former in the development of a celecoxib dried nanosuspension (DNS) for high dissolution rate and drug loading. Tween 80 and Hydroxypropyl Methylcellulose (HPMC) were used as stabilizers in the bead-milling process and dextrin was used as the matrix former in the spray-drying. Various nanosuspensions (NS) were prepared by varying the ratio of HPMC and dextrin, and the physicochemical properties of each formulation were evaluated for particle size, morphology, drug loading, crystallinity, redispersibility, physical stability and dissolution rate. HPMC efficiently stabilized the NS system and reduced the particle size of NS. The mean particle size of the NS with 0.5% HPMC (w/v) was the smallest (248 nm) of all formulations. Dextrin has been shown to inhibit the increase of particle size efficiently, which is known to occur frequently when NS is being solidified. As the dextrin increased in DNS, the dissolution rates of reconstituted NS were significantly improved. However, it was confirmed that more than the necessary amount of dextrin in DNS reduced the dissolution and drug loading. The dissolution of celecoxib in DNS prepared at the ratio (drug:dextrin, 1:2.5) was almost the highest. The dissolution of optimal formulation was 95.8% at 120 min, which was 2.0-fold higher than that of NS dried without dextrin. In conclusion, these results suggest that the formulation based on Tween 80, HPMC and dextrin may be an effective option for DNS to enhance its in vitro dissolution and in vivo oral absorption.

Nanotechnology in the arena of cancer immunotherapy.

Cancer immunotherapy orchestrates the immune system of the human body to fight against cancer cells. By doing this, it has revolutionized cancer treatment. Toxicities arising from dose-limit and low rates of patient response continue to be the major bottlenecks in clinical outcomes. The immune system has a close relationship with tumor. This leads to the combination of nanotechnology and immunotherapy. Nanotechnology can potentiate the efficacy of immunotherapy by enhancing the delivery and retention, and narrowing the toxicity of immunomodulation. In this regard, immunotherapy can combine with nanomedicine to give strategies that could lessen the side effects and improve clinical outcomes in patient populations. In this review, we explore and recapitulate recent advances in nanoparticle-based cancer immunotherapy.

Metabolic Stability of D-Allulose in Biorelevant Media and Hepatocytes: Comparison with Fructose and Erythritol.

D-allulose, a C-3 epimer of D-fructose, is a rare monosaccharide used as a food ingredient or a sweetener. In the present study, the in vitro metabolic stability of D-allulose was examined in biorelevant media, that is, simulated gastric fluid (SGF) and fasted state simulated intestinal fluid (FaSSIF) containing digestive enzymes, and in cryopreserved human and rat hepatocytes. The hepatocyte metabolic stabilities of D-allulose were also investigated and compared with those of fructose and erythritol (a sugar-alcohol with no calorific value). D-allulose was highly stable in SGF (97.8% remained after 60 min) and in FaSSIF (101.3% remained after 240 min), indicating it is neither pH-labile nor degraded in the gastrointestinal tract. D-allulose also exhibited high levels of stability in human and rat hepatocytes (94.5-96.8% remained after 240 min), whereas fructose was rapidly metabolized (43.1-52.6% remained), which suggested these two epimers are metabolized in completely different ways in the liver. The effects of D-allulose on glucose and fructose levels were negligible in hepatocytes. Erythritol was stable in human and rat hepatocytes (102.1-102.9% remained after 240 min). Intravenous pharmacokinetic studies in rats showed D-allulose was eliminated with a mean half-life of 72.2 min and a systemic clearance of 15.8 mL/min/kg. Taken together, our results indicate that D-allulose is not metabolized in the liver, and thus, unlikely to contribute to hepatic energy production.

Comparative Assessment of Biological Activities of Mistletoes for Cosmetic Applications: Viscum Album Var. Coloratum (Kom.) Ohwi and Loranthus Tanakae Franch. & Sav.

Mistletoes, hemiparasites, contain many components with various biological activities and have been used in cosmetics industry. Loranthacease (1,000 species) and Viscaceae (550 species) have the most dominant species in mistletoes (nearly 1,600 species). It can be expected that the biological activities vary from species to species; therefore, we have tested Viscum album var. coloratum (Kom.) Ohwi (belonging to Santalaceae) and Loranthus tanakae Franch. & Sav. (belonging to Loranthacease) for a comparative study of their cosmetic properties, including antioxidant, antimelanogenic, and antiwrinkle activities. As results, the ethanol extract of L. tanakae had higher phenolic content and showed effective antioxidant activity and elastase inhibition. Meanwhile, the ethanol extract of V. album more effectively inhibited tyrosinase. Comparing with ethanol extracts, the water extracts of both mistletoes showed lower biological efficacy than the ethanol extracts or no significant effect. Thus, these results show that different extracts of mistletoe have different levels of biological activities, presumably because of the differences in their phytochemical profiles and because of the different extraction methods used.