Nitrogen and Nod factor signaling determine Lotus japonicus root exudate composition and bacterial assembly.

Symbiosis with soil-dwelling bacteria that fix atmospheric nitrogen allows legume plants to grow in nitrogen-depleted soil. Symbiosis impacts the assembly of root microbiota, but it is unknown how the interaction between the legume host and rhizobia impacts the remaining microbiota and whether it depends on nitrogen nutrition. Here, we use plant and bacterial mutants to address the role of Nod factor signaling on Lotus japonicus root microbiota assembly. We find that Nod factors are produced by symbionts to activate Nod factor signaling in the host and that this modulates the root exudate profile and the assembly of a symbiotic root microbiota. Lotus plants with different symbiotic abilities, grown in unfertilized or nitrate-supplemented soils, display three nitrogen-dependent nutritional states: starved, symbiotic, or inorganic. We find that root and rhizosphere microbiomes associated with these states differ in composition and connectivity, demonstrating that symbiosis and inorganic nitrogen impact the legume root microbiota differently. Finally, we demonstrate that selected bacterial genera characterizing state-dependent microbiomes have a high level of accurate prediction.

Genetic analysis of global faba bean diversity, agronomic traits and selection signatures.

KEY MESSAGE: We identified marker-trait associations for key faba bean agronomic traits and genomic signatures of selection within a global germplasm collection. Faba bean (Vicia faba L.) is a high-protein grain legume crop with great potential for sustainable protein production. However, little is known about the genetics underlying trait diversity. In this study, we used 21,345 high-quality SNP markers to genetically characterize 2678 faba bean genotypes. We performed genome-wide association studies of key agronomic traits using a seven-parent-MAGIC population and detected 238 significant marker-trait associations linked to 12 traits of agronomic importance. Sixty-five of these were stable across multiple environments. Using a non-redundant diversity panel of 685 accessions from 52 countries, we identified three subpopulations differentiated by geographical origin and 33 genomic regions subjected to strong diversifying selection between subpopulations. We found that SNP markers associated with the differentiation of northern and southern accessions explained a significant proportion of agronomic trait variance in the seven-parent-MAGIC population, suggesting that some of these traits were targets of selection during breeding. Our findings point to genomic regions associated with important agronomic traits and selection, facilitating faba bean genomics-based breeding.

Genetic architecture of inter-specific and -generic grass hybrids by network analysis on multi-omics data.

BACKGROUND: Understanding the mechanisms underlining forage production and its biomass nutritive quality at the omics level is crucial for boosting the output of high-quality dry matter per unit of land. Despite the advent of multiple omics integration for the study of biological systems in major crops, investigations on forage species are still scarce. RESULTS: Our results identified substantial changes in gene co-expression and metabolite-metabolite network topologies as a result of genetic perturbation by hybridizing L. perenne with another species within the genus (L. multiflorum) relative to across genera (F. pratensis). However, conserved hub genes and hub metabolomic features were detected between pedigree classes, some of which were highly heritable and displayed one or more significant edges with agronomic traits in a weighted omics-phenotype network. In spite of tagging relevant biological molecules as, for example, the light-induced rice 1 (LIR1), hub features were not necessarily better explanatory variables for omics-assisted prediction than features stochastically sampled and all available regressors. CONCLUSIONS: The utilization of computational techniques for the reconstruction of co-expression networks facilitates the identification of key omic features that serve as central nodes and demonstrate correlation with the manifestation of observed traits. Our results also indicate a robust association between early multi-omic traits measured in a greenhouse setting and phenotypic traits evaluated under field conditions.

The giant diploid faba genome unlocks variation in a global protein crop.

Increasing the proportion of locally produced plant protein in currently meat-rich diets could substantially reduce greenhouse gas emissions and loss of biodiversity1. However, plant protein production is hampered by the lack of a cool-season legume equivalent to soybean in agronomic value2. Faba bean (Vicia faba L.) has a high yield potential and is well suited for cultivation in temperate regions, but genomic resources are scarce. Here, we report a high-quality chromosome-scale assembly of the faba bean genome and show that it has expanded to a massive 13 Gb in size through an imbalance between the rates of amplification and elimination of retrotransposons and satellite repeats. Genes and recombination events are evenly dispersed across chromosomes and the gene space is remarkably compact considering the genome size, although with substantial copy number variation driven by tandem duplication. Demonstrating practical application of the genome sequence, we develop a targeted genotyping assay and use high-resolution genome-wide association analysis to dissect the genetic basis of seed size and hilum colour. The resources presented constitute a genomics-based breeding platform for faba bean, enabling breeders and geneticists to accelerate the improvement of sustainable protein production across the Mediterranean, subtropical and northern temperate agroecological zones.

Leveraging spatiotemporal genomic breeding value estimates of dry matter yield and herbage quality in ryegrass via random regression models.

Joint modeling of correlated multienvironment and multiharvest data of perennial crop species may offer advantages in prediction schemes and a better understanding of the underlying dynamics in space and time. The goal of the present study was to investigate the relevance of incorporating the longitudinal dimension of within-season multiple measurements of forage perennial ryegrass (Lolium perenne L.) traits in a reaction-norm model setup that additionally accounts for genotype × environment (G × E) interactions. Genetic parameters and accuracy of genomic estimated breeding value (gEBV) predictions were investigated by fitting three genomic random regression models (gRRMs) using Legendre polynomial functions to the data. Genomic DNA sequencing of family pools of diploid perennial ryegrass was performed using DNA nanoball-based technology and yielded 56,645 single-nucleotide polymorphisms, which were used to calculate the allele frequency-based genomic relationship matrix. Biomass yield's estimated additive genetic variance and heritability values were higher in later harvests. The additive genetic correlations were moderate to low in early measurements and peaked at intermediates with fairly stable values across the environmental gradient except for the initial harvest data collection. This led to the conclusion that complex (G × E) arises from spatial and temporal dimensions in the early season with lower reranking trends thereafter. In general, modeling the temporal dimension with a second-order orthogonal polynomial improved the accuracy of gEBV prediction for nutritive quality traits, but no gain in prediction accuracy was detected for dry matter yield (DMY). This study leverages the flexibility and usefulness of gRRM models for perennial ryegrass breeding and can be readily extended to other multiharvest crops.

Major effect loci for plant size before onset of nitrogen fixation allow accurate prediction of yield in white clover.

KEY MESSAGE: Accurate genomic prediction of yield within and across generations was achieved by estimating the genetic merit of individual white clover genotypes based on extensive genetic replication using cloned material. White clover is an agriculturally important forage legume grown throughout temperate regions as a mixed clover-grass crop. It is typically cultivated with low nitrogen input, making yield dependent on nitrogen fixation by rhizobia in root nodules. Here, we investigate the effects of clover and rhizobium genetic variation by monitoring plant growth and quantifying dry matter yield of 704 combinations of 145 clover genotypes and 170 rhizobium inocula. We find no significant effect of rhizobium variation. In contrast, we can predict yield based on a few white clover markers strongly associated with plant size prior to nitrogen fixation, and the prediction accuracy for polycross offspring yield is remarkably high. Several of the markers are located near a homolog of Arabidopsis thaliana GIGANTUS 1, which regulates growth rate and biomass accumulation. Our work provides fundamental insight into the genetics of white clover yield and identifies specific candidate genes as breeding targets.

MeSCoT: the tool for quantitative trait simulation through the mechanistic modeling of genes' regulatory interactions.

This work represents a novel mechanistic approach to simulate and study genomic networks with accompanying regulatory interactions and complex mechanisms of quantitative trait formation. The approach implemented in MeSCoT software is conceptually based on the omnigenic genetic model of quantitative (complex) trait, and closely imitates the basic in vivo mechanisms of quantitative trait realization. The software provides a framework to study molecular mechanisms of gene-by-gene and gene-by-environment interactions underlying quantitative trait's realization and allows detailed mechanistic studies of impact of genetic and phenotypic variance on gene regulation. MeSCoT performs a detailed simulation of genes' regulatory interactions for variable genomic architectures and generates complete set of transcriptional and translational data together with simulated quantitative trait values. Such data provide opportunities to study, for example, verification of novel statistical methods aiming to integrate intermediate phenotypes together with final phenotype in quantitative genetic analyses or to investigate novel approaches for exploiting gene-by-gene and gene-by-environment interactions.

Greenotyper: Image-Based Plant Phenotyping Using Distributed Computing and Deep Learning.

Image-based phenotype data with high temporal resolution offers advantages over end-point measurements in plant quantitative genetics experiments, because growth dynamics can be assessed and analysed for genotype-phenotype association. Recently, network-based camera systems have been deployed as customizable, low-cost phenotyping solutions. Here, we implemented a large, automated image-capture system based on distributed computing using 180 networked Raspberry Pi units that could simultaneously monitor 1,800 white clover (Trifolium repens) plants. The camera system proved stable with an average uptime of 96% across all 180 cameras. For analysis of the captured images, we developed the Greenotyper image analysis pipeline. It detected the location of the plants with a bounding box accuracy of 97.98%, and the U-net-based plant segmentation had an intersection over union accuracy of 0.84 and a pixel accuracy of 0.95. We used Greenotyper to analyze a total of 355,027 images, which required 24-36 h. Automated phenotyping using a large number of static cameras and plants thus proved a cost-effective alternative to systems relying on conveyor belts or mobile cameras.

Effect of genomic selection and genotyping strategy on estimation of variance components in animal models using different relationship matrices.

BACKGROUND: The traditional way to estimate variance components (VC) is based on the animal model using a pedigree-based relationship matrix (A) (A-AM). After genomic selection was introduced into breeding programs, it was anticipated that VC estimates from A-AM would be biased because the effect of selection based on genomic information is not captured. The single-step method (H-AM), which uses an H matrix as (co)variance matrix, can be used as an alternative to estimate VC. Here, we compared VC estimates from A-AM and H-AM and investigated the effect of genomic selection, genotyping strategy and genotyping proportion on the estimation of VC from the two methods, by analyzing a dataset from a commercial broiler line and a simulated dataset that mimicked the broiler population. RESULTS: VC estimates from H-AM were severely overestimated with a high proportion of selective genotyping, and overestimation increased as proportion of genotyping increased in the analysis of both commercial and simulated data. This bias in H-AM estimates arises when selective genotyping is used to construct the H-matrix, regardless of whether selective genotyping is applied or not in the selection process. For simulated populations under genomic selection, estimates of genetic variance from A-AM were also significantly overestimated when the effect of genomic selection was strong. Our results suggest that VC estimates from H-AM under random genotyping have the expected values. Predicted breeding values from H-AM were inflated when VC estimates were biased, and inflation differed between genotyped and ungenotyped animals, which can lead to suboptimal selection decisions. CONCLUSIONS: We conclude that VC estimates from H-AM are biased with selective genotyping, but are close to expected values with random genotyping.VC estimates from A-AM in populations under genomic selection are also biased but to a much lesser degree. Therefore, we recommend the use of H-AM with random genotyping to estimate VC for populations under genomic selection. Our results indicate that it is still possible to use selective genotyping in selection, but then VC estimation should avoid the use of genotypes from one side only of the distribution of phenotypes. Hence, a dual genotyping strategy may be needed to address both selection and VC estimation.

Use of multiple traits genomic prediction, genotype by environment interactions and spatial effect to improve prediction accuracy in yield data.

Genomic selection has been extensively implemented in plant breeding schemes. Genomic selection incorporates dense genome-wide markers to predict the breeding values for important traits based on information from genotype and phenotype records on traits of interest in a reference population. To date, most relevant investigations have been performed using single trait genomic prediction models (STGP). However, records for several traits at once are usually documented for breeding lines in commercial breeding programs. By incorporating benefits from genetic characterizations of correlated phenotypes, multiple trait genomic prediction (MTGP) may be a useful tool for improving prediction accuracy in genetic evaluations. The objective of this study was to test whether the use of MTGP and including proper modeling of spatial effects can improve the prediction accuracy of breeding values in commercial barley and wheat breeding lines. We genotyped 1,317 spring barley and 1,325 winter wheat lines from a commercial breeding program with the Illumina 9K barley and 15K wheat SNP-chip (respectively) and phenotyped them across multiple years and locations. Results showed that the MTGP approach increased correlations between future performance and estimated breeding value of yields by 7% in barley and by 57% in wheat relative to using the STGP approach for each trait individually. Analyses combining genomic data, pedigree information, and proper modeling of spatial effects further increased the prediction accuracy by 4% in barley and 3% in wheat relative to the model using genomic relationships only. The prediction accuracy for yield in wheat and barley yield trait breeding, were improved by combining MTGP and spatial effects in the model.

Author Correction: Genomic prediction and GWAS of yield, quality and disease-related traits in spring barley and winter wheat.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Bayesian modeling reveals host genetics associated with rumen microbiota jointly influence methane emission in dairy cows.

Reducing methane emissions from livestock production is of great importance for the sustainable management of the Earth's environment. Rumen microbiota play an important role in producing biogenic methane. However, knowledge of how host genetics influences variation in ruminal microbiota and their joint effects on methane emission is limited. We analyzed data from 750 dairy cows, using a Bayesian model to simultaneously assess the impact of host genetics and microbiota on host methane emission. We estimated that host genetics and microbiota explained 24% and 7%, respectively, of variation in host methane levels. In this Bayesian model, one bacterial genus explained up to 1.6% of the total microbiota variance. Further analysis was performed by a mixed linear model to estimate variance explained by host genomics in abundances of microbial genera and operational taxonomic units (OTU). Highest estimates were observed for a bacterial OTU with 33%, for an archaeal OTU with 26%, and for a microbial genus with 41% heritability. However, after multiple testing correction for the number of genera and OTUs modeled, none of the effects remained significant. We also used a mixed linear model to test effects of individual host genetic markers on microbial genera and OTUs. In this analysis, genetic markers inside host genes ABS4 and DNAJC10 were found associated with microbiota composition. We show that a Bayesian model can be utilized to model complex structure and relationship between microbiota simultaneously and their interaction with host genetics on methane emission. The host genome explains a significant fraction of between-individual variation in microbial abundance. Individual microbial taxonomic groups each only explain a small amount of variation in methane emissions. The identification of genes and genetic markers suggests that it is possible to design strategies for breeding cows with desired microbiota composition associated with phenotypes.

Genomic prediction and GWAS of yield, quality and disease-related traits in spring barley and winter wheat.

Genome-wide association study (GWAS) and genomic prediction (GP) are extensively employed to accelerate genetic gain and identify QTL in plant breeding. In this study, 1,317 spring barley and 1,325 winter wheat breeding lines from a commercial breeding program were genotyped with the Illumina 9 K barley or 15 K wheat SNP-chip, and phenotyped in multiple years and locations. For GWAS, in spring barley, a QTL on chr. 4H associated with powdery mildew and ramularia resistance were found. There were several SNPs on chr. 4H showing genome-wide significance with yield traits. In winter wheat, GWAS identified two SNPs on chr. 6A, and one SNP on chr. 1B, significantly associated with quality trait moisture, as well as one SNP located on chr. 5B associated with starch content in the seeds. The significant SNPs identified by multiple trait GWAS were generally the same as those found in single trait GWAS. GWAS including genotype-location information in the model identified significant SNPs in each tested location, which were not found previously when including all locations in the GWAS. For GP, in spring barley, GP using the Bayesian Power Lasso model had higher accuracy than ridge regression BLUP in powdery mildew and yield traits, whereas the prediction accuracies were similar using Bayesian Power Lasso model and rrBLUP for yield traits in winter wheat.

Breeding for dual-purpose wheat varieties using marker-trait associations for biomass yield and quality traits.

KEY MESSAGE: This study demonstrates that an active breeding nursery with rotation can be used to identify marker-trait associations for biomass yield and quality parameters that are important for biorefinery purposes. Wheat straw is a valuable feedstock for bioethanol production, but due to the recalcitrant nature of lignocellulose, its efficient use in biorefineries is limited by its low digestibility and difficult conversion of structural carbohydrates into free sugars. A genome-wide association study (GWAS) was conducted to search for significant SNP markers that could be used in a breeding programme to improve the value of wheat straw in a biorefinery setting. As part of a 3-year breeding programme (2013-2016), 190 winter wheat lines were phenotyped for traits that affect the yield and quality of the harvested biomass. These traits included straw yield, plant height, lodging at three growth stages and Septoria tritici blotch (STB) susceptibility. Release of glucose, xylose and arabinose was determined after hydrothermal pretreatment and enzymatic hydrolysis of the straw. The lines were genotyped using 15 K SNP markers and 5552 SNP markers could be used after filtering. Heritability for all traits ranged from 0.02 to 0.74. GWASs were conducted using CMLM, SUPER and FarmCPU algorithms, to analyse which algorithm could detect the highest number of marker-trait associations (MTAs). Comparable tendencies were obtained from CMLM and FarmCPU, but FarmCPU produced the most significant results. MTAs were obtained for lodging, harvest index, plant height, STB, glucose, xylose and arabinose at a significance level of p < 9.01 × 10-6. MTAs in chromosome 6A were observed for glucose, xylose and arabinose, and could be of importance for increasing sugar release for bioethanol production.

Models with indirect genetic effects depending on group sizes: a simulation study assessing the precision of the estimates of the dilution parameter.

BACKGROUND: In settings with social interactions, the phenotype of an individual is affected by the direct genetic effect (DGE) of the individual itself and by indirect genetic effects (IGE) of its group mates. In the presence of IGE, heritable variance and response to selection depend on size of the interaction group (group size), which can be modelled via a 'dilution' parameter (d) that measures the magnitude of IGE as a function of group size. However, little is known about the estimability of d and the precision of its estimate. Our aim was to investigate how precisely d can be estimated and what determines this precision. METHODS: We simulated data with different group sizes and estimated d using a mixed model that included IGE and d. Schemes included various average group sizes (4, 6, and 8), variation in group size (coefficient of variation (CV) ranging from 0.125 to 1.010), and three values of d (0, 0.5, and 1). A design in which individuals were randomly allocated to groups was used for all schemes and a design with two families per group was used for some schemes. Parameters were estimated using restricted maximum likelihood (REML). Bias and precision of estimates were used to assess their statistical quality. RESULTS: The dilution parameter of IGE can be estimated for simulated data with variation in group size. For all schemes, the length of confidence intervals ranged from 0.114 to 0.927 for d, from 0.149 to 0.198 for variance of DGE, from 0.011 to 0.086 for variance of IGE, and from 0.310 to 0.557 for genetic correlation between DGE and IGE. To estimate d, schemes with groups composed of two families performed slightly better than schemes with randomly composed groups. CONCLUSIONS: Dilution of IGE was estimable, and in general its estimation was more precise when CV of group size was larger. All estimated parameters were unbiased. Estimation of dilution of IGE allows the contribution of direct and indirect variance components to heritable variance to be quantified in relation to group size and, thus, it could improve prediction of the expected response to selection in environments with group sizes that differ from the average size.

Improving genomic predictions by correction of genotypes from genotyping by sequencing in livestock populations.

BACKGROUND: Genotyping by sequencing (GBS) is a robust method to genotype markers. Many factors can influence the genotyping quality. One is that heterozygous genotypes could be wrongly genotyped as homozygotes, dependent on the genotyping depths. In this study, a method correcting this type of genotyping error was demonstrated. The efficiency of this correction method and its effect on genomic prediction were assessed using simulated data of livestock populations. RESULTS: Chip array (Chip) and four depths of GBS data was simulated. After quality control (call rate ≥ 0.8 and MAF ≥ 0.01), the remaining number of Chip and GBS SNPs were both approximately 7,000, averaged over 10 replicates. GBS genotypes were corrected with the proposed method. The reliability of genomic prediction was calculated using GBS, corrected GBS (GBSc), true genotypes for the GBS loci (GBSr) and Chip data. The results showed that GBSc had higher rates of correct genotype calls and higher correlations with true genotypes than GBS. For genomic prediction, using Chip data resulted in the highest reliability. As the depth increased to 10, the prediction reliabilities using GBS and GBSc data approached those using true GBS data. The reliabilities of genomic prediction using GBSc data were 0.604, 0.672, 0.684 and 0.704 after genomic correction, with the improved values of 0.013, 0.009, 0.006 and 0.001 at depth = 2, 4, 5 and 10, respectively. CONCLUSIONS: The current study showed that a correction method for GBS data increased the genotype accuracies and, consequently, improved genomic predictions. These results suggest that a correction of GBS genotype is necessary, especially for the GBS data with low depths.

Genomic Prediction Using Multi-trait Weighted GBLUP Accounting for Heterogeneous Variances and Covariances Across the Genome.

Implicit assumption of common (co)variance for all loci in multi-trait Genomic Best Linear Unbiased Prediction (GBLUP) results in a genomic relationship matrix (G) that is common to all traits. When this assumption is violated, Bayesian whole genome regression methods may be superior to GBLUP by accounting for unequal (co)variance for all loci or genome regions. This study aimed to develop a strategy to improve the accuracy of GBLUP for multi-trait genomic prediction, using (co)variance estimates of SNP effects from Bayesian whole genome regression methods. Five generations (G1-G5, test populations) of genotype data were available by simulations based on data of 2,200 Danish Holstein cows (G0, reference population). Two correlated traits with heritabilities of 0.1 or 0.4, and a genetic correlation of 0.45 were generated. First, SNP effects and breeding values were estimated using BayesAS method, assuming (co)variance was the same for SNPs within a genome region, and different between regions. Region size was set as one SNP, 100 SNPs, a whole chromosome or whole genome. Second, posterior (co)variances of SNP effects were used to weight SNPs in construction of G matrices. In general, region size of 100 SNPs led to highest prediction accuracies using BayesAS, and wGBLUP outperformed GBLUP at this region size. Our results suggest that when genetic architectures of traits favor Bayesian methods, the accuracy of multi-trait GBLUP can be as high as the Bayesian method if SNPs are weighted by the Bayesian posterior (co)variances.

The Value of Expanding the Training Population to Improve Genomic Selection Models in Tetraploid Potato.

Genomic selection (GS) is becoming increasingly applicable to crops as the genotyping costs continue to decrease, which makes it an attractive alternative to traditional selective breeding based on observed phenotypes. With genome-wide molecular markers, selection based on predictions from genotypes can be made in the absence of direct phenotyping. The reliability of predictions depends strongly on the number of individuals used for training the predictive algorithms, particularly in a highly genetically diverse organism such as potatoes; however, the relationship between the individuals also has an enormous impact on prediction accuracy. Here we have studied genomic prediction in three different panels of potato cultivars, varying in size, design, and phenotypic profile. We have developed genomic prediction models for two important agronomic traits of potato, dry matter content and chipping quality. We used genotyping-by-sequencing to genotype 1,146 individuals and generated genomic prediction models from 167,637 markers to calculate genomic estimated breeding values with genomic best linear unbiased prediction. Cross-validated prediction correlations of 0.75-0.83 and 0.39-0.79 were obtained for dry matter content and chipping quality, respectively, when combining the three populations. These prediction accuracies were similar to those obtained when predicting performance within each panel. In contrast, but not unexpectedly, predictions across populations were generally lower, 0.37-0.71 and 0.28-0.48 for dry matter content and chipping quality, respectively. These predictions are not limited by the number of markers included, since similar prediction accuracies could be obtained when using merely 7,800 markers (<5%). Our results suggest that predictions across breeding populations in tetraploid potato are presently unreliable, but that individual prediction models within populations can be combined in an additive fashion to obtain high quality prediction models relevant for several breeding populations.

Optimized Use of Low-Depth Genotyping-by-Sequencing for Genomic Prediction Among Multi-Parental Family Pools and Single Plants in Perennial Ryegrass (Lolium perenne L.).

Ryegrass single plants, bi-parental family pools, and multi-parental family pools are often genotyped, based on allele-frequencies using genotyping-by-sequencing (GBS) assays. GBS assays can be performed at low-coverage depth to reduce costs. However, reducing the coverage depth leads to a higher proportion of missing data, and leads to a reduction in accuracy when identifying the allele-frequency at each locus. As a consequence of the latter, genomic relationship matrices (GRMs) will be biased. This bias in GRMs affects variance estimates and the accuracy of GBLUP for genomic prediction (GBLUP-GP). We derived equations that describe the bias from low-coverage sequencing as an effect of binomial sampling of sequence reads, and allowed for any ploidy level of the sample considered. This allowed us to combine individual and pool genotypes in one GRM, treating pool-genotypes as a polyploid genotype, equal to the total ploidy-level of the parents of the pool. Using simulated data, we verified the magnitude of the GRM bias at different coverage depths for three different kinds of ryegrass breeding material: individual genotypes from single plants, pool-genotypes from F2 families, and pool-genotypes from synthetic varieties. To better handle missing data, we also tested imputation procedures, which are suited for analyzing allele-frequency genomic data. The relative advantages of the bias-correction and the imputation of missing data were evaluated using real data. We examined a large dataset, including single plants, F2 families, and synthetic varieties genotyped in three GBS assays, each with a different coverage depth, and evaluated them for heading date, crown rust resistance, and seed yield. Cross validations were used to test the accuracy using GBLUP approaches, demonstrating the feasibility of predicting among different breeding material. Bias-corrected GRMs proved to increase predictive accuracies when compared with standard approaches to construct GRMs. Among the imputation methods we tested, the random forest method yielded the highest predictive accuracy. The combinations of these two methods resulted in a meaningful increase of predictive ability (up to 0.09). The possibility of predicting across individuals and pools provides new opportunities for improving ryegrass breeding schemes.

Genome-Wide Association Studies and Comparison of Models and Cross-Validation Strategies for Genomic Prediction of Quality Traits in Advanced Winter Wheat Breeding Lines.

The aim of the this study was to identify SNP markers associated with five important wheat quality traits (grain protein content, Zeleny sedimentation, test weight, thousand-kernel weight, and falling number), and to investigate the predictive abilities of GBLUP and Bayesian Power Lasso models for genomic prediction of these traits. In total, 635 winter wheat lines from two breeding cycles in the Danish plant breeding company Nordic Seed A/S were phenotyped for the quality traits and genotyped for 10,802 SNPs. GWAS were performed using single marker regression and Bayesian Power Lasso models. SNPs with large effects on Zeleny sedimentation were found on chromosome 1B, 1D, and 5D. However, GWAS failed to identify single SNPs with significant effects on the other traits, indicating that these traits were controlled by many QTL with small effects. The predictive abilities of the models for genomic prediction were studied using different cross-validation strategies. Leave-One-Out cross-validations resulted in correlations between observed phenotypes corrected for fixed effects and genomic estimated breeding values of 0.50 for grain protein content, 0.66 for thousand-kernel weight, 0.70 for falling number, 0.71 for test weight, and 0.79 for Zeleny sedimentation. Alternative cross-validations showed that the genetic relationship between lines in training and validation sets had a bigger impact on predictive abilities than the number of lines included in the training set. Using Bayesian Power Lasso instead of GBLUP models, gave similar or slightly higher predictive abilities. Genomic prediction based on all SNPs was more effective than prediction based on few associated SNPs.