Cytotoxicity of Metal Ions Released from NiTi and Stainless Steel Orthodontic Appliances, Part 1: Surface Morphology and Ion Release Variations.

Despite numerous studies on ion release from orthodontic appliances, no clear conclusions can be drawn due to complex interrelations of multiple factors. Therefore, as the first part of a comprehensive investigation of cytotoxicity of eluted ions, the objective of this study was to analyze four parts of a fixed orthodontic appliance. Specifically, NiTi archwires and stainless steel (SS) brackets, bands, and ligatures were immersed in artificial saliva and studied for morphological and chemical changes after 3-, 7-, and 14-day immersion, using the SEM/EDX technique. Ion release profiles were analyzed for all eluted ions using inductively coupled plasma mass spectrometry (ICP-MS). The results demonstrated dissimilar surface morphologies among parts of the fixed appliance, due to variations in manufacturing processes. The onset of pitting corrosion was observed for the SS brackets and bands in the as-received state. Protective oxide layers were not observed on any of the parts, but adherent layers developed on SS brackets and ligatures during immersion. Salt precipitation, mainly KCl, was also observed. ICP-MS proved to be more sensitive than SEM/EDX and exhibited results undetected by SEM/EDX. Ion release was an order-of-magnitude higher for SS bands compared to other parts, which was attributed to manufacturing procedure (welding). Ion release did not correlate with surface roughness.

Adhesion of Oral Bacteria to Commercial d-PTFE Membranes: Polymer Microstructure Makes a Difference.

Bacterial contamination of the membranes used during guided bone regeneration directly influences the outcome of this procedure. In this study, we analyzed the early stages of bacterial adhesion on two commercial dense polytetrafluoroethylene (d-PTFE) membranes in order to identify microstructural features that led to different adhesion strengths. The microstructure was investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR). The surface properties were analyzed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and surface free energy (SFE) measurements. Bacterial properties were determined using the microbial adhesion to solvents (MATS) assay, and bacterial surface free energy (SFE) was measured spectrophotometrically. The adhesion of four species of oral bacteria (Streptococcus mutans, Streptococcus oralis, Aggregatibacter actinomycetemcomitas, and Veilonella parvula) was studied on surfaces with or without the artificial saliva coating. The results indicated that the degree of crystallinity (78.6% vs. 34.2%, with average crystallite size 50.54 nm vs. 32.86 nm) is the principal feature promoting the adhesion strength, through lower nanoscale roughness and possibly higher surface stiffness. The spherical crystallites ("warts"), observed on the surface of the highly crystalline sample, were also identified as a contributor. All bacterial species adhered better to a highly crystalline membrane (around 1 log10CFU/mL difference), both with and without artificial saliva coating. Our results show that the changes in polymer microstructure result in different antimicrobial properties even for chemically identical PTFE membranes.

Perspectives of Microscopy Methods for Morphology Characterisation of Extracellular Vesicles from Human Biofluids.

Extracellular vesicles (EVs) are nanometric membranous structures secreted from almost every cell and present in biofluids. Because EV composition reflects the state of its parental tissue, EVs possess an enormous diagnostic/prognostic potential to reveal pathophysiological conditions. However, a prerequisite for such usage of EVs is their detailed characterisation, including visualisation which is mainly achieved by atomic force microscopy (AFM) and electron microscopy (EM). Here we summarise the EV preparation protocols for AFM and EM bringing out the main challenges in the imaging of EVs, both in their natural environment as biofluid constituents and in a saline solution after EV isolation. In addition, we discuss approaches for EV imaging and identify the potential benefits and disadvantages when different AFM and EM methods are applied, including numerous factors that influence the morphological characterisation, standardisation, or formation of artefacts. We also demonstrate the effects of some of these factors by using cerebrospinal fluid as an example of human biofluid with a simpler composition. Here presented comparison of approaches to EV imaging should help to estimate the current state in morphology research of EVs from human biofluids and to identify the most efficient pathways towards the standardisation of sample preparation and microscopy modes.

Building organosilica hybrid nanohemispheres via thiol-ene click reaction on alumina thin films deposited by atomic layer deposition (ALD).

The present work shows a surface-induced preparation of sub-100 nm organosilica nanohemispheres on atomic layer deposited (ALD) Al2O3 thin films, which was achieved by cooperative condensation/hydrolysis and thiol-ene click chemical reactions. The two-step synthetic approach consists of an initial silanization of the Al2O3 film with vinyltrimethoxysilane (VTMS), followed by a photo-promoted growth of surface-bound nanoparticles in the presence of (3-mercaptopropyl)trimethoxysilane (MPTMS). Characterization by means of FE-SEM, XPS and EDS points towards the growth of the nanohemispherical structures being governed by an initial nucleation of thiolated organosilica seeds in solution as a result of self-condensation of MPTMS and oxidation of thiols to disulfides. Once bound to the vinyl terminated Al2O3via photo-assisted thiol-ene coupling, these seeds promote area-selective growth of the nanoparticles through binding of further MPTMS from the solution. After an additional ALD deposition of ZnO, the resulting thin hybrid film exhibits enhanced hydrophobicity when compared to ZnO films deposited directly on Al2O3 under the same processing conditions.

Introducing the concept of pulsed vapor phase copper-free surface click-chemistry using the ALD technique.

We report for the first time on a pulsed vapor phase copper-free azide-alkyne click reaction on ZnO by using the atomic layer deposition (ALD) process technology. This reproducible and fast method is based on an in situ two-step reaction consisting of sequential exposures of ZnO to propiolic acid and benzyl azide.

Excited-state absorption and ultrafast relaxation dynamics of protoporphyrin IX and hemin.

The transient evolution of protoporphyrin IX (PPIX) and hemin following the Soret band excitation was measured in the 410-600 nm spectral region with sub-picosecond time resolution. In PPIX the relaxation pathway was characterized in the femto- and picosecond time scale by two processes with time constants of 350 fs and ~6 ps, describing the evolution of the system through internal Q(y) → Q(x) conversion and vibrational relaxation and cooling in the Q(x) state. The lifetime of the Q(x) state was found to be 10.4 ns by time resolved fluorescence measurements. In hemin, the ground state is completely recovered in tens of picoseconds through pathways involving CT and (d,d) states. The experimentally observed vibrational dynamics is mainly due to "hot" ground state transitions.