RESUMO
The importance of catalysts in industrial products is a driving factor in the search of efficient and cost-effective catalysts, creating considerable interest in the past decade in single-atom catalysis. One of the first requirements of a good catalyst is that it should bind to the molecules with energies intermediate between physisorption and chemisorption while simultaneously activating them. Herein, it is shown that superatoms, which are atomic clusters with fixed size and composition, can meet this challenge even better than the atoms whose chemistry they mimic. The reactions of molecules such as H2, O2, N2, CO, NO, and CO2 with an atom (Li) and its corresponding superatom (Li3O) are confirmed through study. As these clusters need to be supported on a substrate for practical applications, the study focuses on the reaction of CO2 with Li and Li3O supported on graphene, Au(111), and Cu(111) substrates. Using density functional theory, it is shown that the Li3O superatom can activate CO2 far greater than the Li atom - stretching the CO bond from 1.16 Å to as large as 1.30 Å and bending the OâCâO bond angle from 180° to as low as 120°. Equally interesting, the results are not very sensitive to the substrate.
RESUMO
Atomic clusters are known to exhibit properties different from their bulk phase. However, when assembled or supported on substrates, clusters often lose their uniqueness. For example, uranium and coinage metals (Cu, Ag, Au) are nonmagnetic in their bulk. Herein, we show that UX6 (X= Cu, Ag, Au) clusters, unlike their nonmagnetic bulk, are not only magnetic but also retain their magnetic character and structure when assembled into a two-dimensional (2D) material. The magnetic moment remains localized at the U site and is found to be 3µB in clusters and about 2µB in the 2D structure. In 2D UX4 (X = Cu, Ag, Au) monolayers, U atoms are found to be coupled antiferromagnetically through an indirect exchange coupling mediated by the coinage metal atoms. Furthermore, hydrogenation of these monolayers can induce a transition from the antiferromagnetic to the ferromagnetic phase. These results, based on density functional theory, have predictive capability and can motivate experiments.
RESUMO
Different from conventional 2D sliding ferroelectrics with polarization switchable in the out-of-plane via interlayer sliding, we show the existence of in-plane sliding ferroelectricity in a bilayer of a pentagon-based van der Waals heterostructure formed by vertically stacking an experimentally synthesized penta-PdSe2 sheet and a crystal lattice well-matched penta-PtSe2 sheet. From the 128 sliding patterns, four stable configurations are found that exhibit in-plane sliding ferroelectricity with an ultralow polarization switching barrier of 1.91 meV/atom and a high ferroelectric polarization of ±17.11 × 10-10 C m-1. Following the ferroelectric transition among the stable sliding configurations, significant changes in carrier mobility, electrical conductivity, and second harmonic generation are identified. In particular, the ferroelectric stacking configurations are found to possess a negative Poisson's ratio, facilitating the experimental characterization of the sliding ferroelectric effect. This study demonstrates that pentagonal sheets can be used to realize 2D in-plane sliding ferroelectrics going beyond the existing ones.
RESUMO
The exfoliation of nonlayered materials to mono- or few-layers is of growing interest to realize their full potential for various applications. Nickel cobaltite (NiCo2O4), which has a spinel crystal structure, is one such nonlayered material with unique properties and has been utilized in a wide range of applications. Herein, NiCo2O4 is synthesized from NiCo2- Layered double hydroxides using a topochemical conversion technique. Subsequently, bulk NiCo2O4 is exfoliated into mono- or few-layer nickel cobaltene nanosheets using liquid-phase exfoliation in various low-boiling point solvents. An analytical centrifuge technique is also utilized to understand the solute-solvent interactions by determining their dispersion stability using parameters such as the instability index and sedimentation velocity. Among the studied solvents, water/isopropyl alcohol cosolvent is found to have better dispersion stability. In addition, density functional theory calculations are carried out to understand the exfoliation mechanism. It is found that the surface termination arising from the Co-O bond needs the least energy for exfoliation. Furthermore, the obtained nickel cobaltene nanosheets are utilized as an active material for supercapacitors without any conductive additives or binders. A solid-state symmetric supercapacitor delivers a specific capacitance of 10.2 mF cm-2 with robust stability, retaining â¼98% capacitance after 4000 cycles.
RESUMO
Sulfur dioxide (SO2) is a harmful acidic gas generated from power plants and fossil fuel combustion and represents a significant health risk and threat to the environment. Benzimidazole-linked polymers (BILPs) have emerged as a promising class of porous solid adsorbents for toxic gases because of their chemical and thermal stability as well as the chemical nature of the imidazole moiety. The performance of BILPs in SO2 capture was examined by synergistic experimental and theoretical studies. BILPs exhibit a significantly high SO2 uptake of up to 8.5 mmol g-1 at 298 K and 1.0 bar. The density functional theory (DFT) calculations predict that this high SO2 uptake is due to the dipole-dipole interactions between SO2 and the functionalized polymer frames through O2S(δ+)···N(δ-)-imine and OâSâO(δ-)···H(δ+)-aryl and intermolecular attraction between SO2 molecules (OâSâO(δ-)···S(δ+)O2). Moderate isosteric heats of adsorption (Qst ≈ 38 kJ mol-1) obtained from experimental SO2 uptake studies are well supported by the DFT calculations (≈40 kJ mol-1), which suggests physisorption processes enabling rapid adsorbent regeneration for reuse. Repeated adsorption experiments with almost identical SO2 uptake confirm the easy regeneration and robustness of BILPs. Moreover, BILPs possess very high SO2 adsorption selectivity at low concentration over carbon dioxide (CO2), methane (CH4), and nitrogen (N2): SO2/CO2, 19-24; SO2/CH4, 118-113; SO2/N2, 600-674. This study highlights the potential of BILPs in the desulfurization of flue gas or other gas mixtures through capturing trace levels of SO2.
RESUMO
Motivated by the recent experimental synthesis of a LaCl3-based lithium superionic conductor [Yin, Y.-C. Nature 2023, 616, 77-83], we explore the potential of a LaCl3-based system for a sodium superionic conductor in this work. Using density functional theory combined with molecular dynamics simulation and a grand potential phase diagram analysis, we find that the resulting Na3La5Cl18 exhibits high energetic stability with a small energy-above-hull of 18 meV per atom, a large band gap of 5.58 eV, a wide electrochemical window of 0.41-3.76 V from the cathodic to the anodic limit, and a high Na+ conductivity of 1.3 mS/cm at 300 K. Furthermore, Na3La5Cl18 shows high chemical interface stability with the reported high-potential cathode materials such as NaCoO2, NaCrO2, Na2FePO4F, Na3V2(PO4)3, and Na3V2(PO4)2F3. These findings clearly suggest that the LaCl3-based framework can be used as a building block not only for Li-ion but also for Na-ion batteries.
RESUMO
Two of the basic requirements of a good catalyst are that molecules be bound to it with energies intermediate between physisorption and chemisorption and be simultaneously activated in the process. Using density functional theory, we have studied the interaction of small molecules such as H2, O2, N2, CO2, CO, and NH3 with modified dodecaborate anion [B12H12]2-, namely, [B12X11]- and [B12X11]2- (X = H, F, CN). Calculations of the structure, stability, and electronic properties of these species interacting with the above molecules show that they meet the above requirements. In addition, [B12X11]2- (X = F, CN) species are not only more stable than [B12X11]- species but also bind to O2 more strongly than their monoanion counterparts.
RESUMO
Lithium-sulfur batteries hold great promise as next-generation high-energy-density batteries. However, their performance has been limited by the low cycling stability and sulfur utilization. Herein, we demonstrate that a selective reduction of the multivariate metal-organic framework, MTV-MOF-74 (Co, Ni, Fe), transforms the framework into a porous carbon decorated with bimetallic CoNi alloy and Fe3O4 nanoparticles capable of entrapping soluble lithium polysulfides while synergistically facilitating their rapid conversion into Li2S. Electrochemical studies on coin cells containing 89 wt % sulfur loading revealed a reversible capacity of 1439.8 mA h g-1 at 0.05 C and prolonged cycling stability for 1000 cycles at 1 C/1060.2 mA h g-1 with a decay rate of 0.018% per cycle. At a high areal sulfur loading of 6.9 mg cm-2 and lean electrolyte/sulfur ratio (4.5 µL:1.0 mg), the battery based on the 89S@CoNiFe3O4/PC cathode provides a high areal capacity of 6.7 mA h cm-2. The battery exhibits an outstanding power density of 849 W kg-1 at 5 C and delivers a specific energy of 216 W h kg-1 at 2 C, corresponding to a specific power of 433 W kg-1. Density functional theory shows that the observed results are due to the strong interaction between the CoNi alloy and Fe3O4, facilitated by charge transfer between the polysulfides and the substrate.
RESUMO
Dodecaborate anions ([B12H12]2-) and their derivatives where hydrogen atoms are replaced by halogen, pseudohalogen, or superhalogen moieties belong to a class of very stable species, even in the gas phase. Their stability is attributed to Wade's electron counting rule that requires n + 1 pairs of skeletal electrons, n being the number of boron atoms. Consequently, [B12X11]2- (X = H, F, Cl, Br, I, CN) dianions that carry one more electron than needed to satisfy Wade's rule should not be stable, assuming that the rule applies to fragments as well. While this is the case for X = H, we show that [B12X11]2- (X = F, Cl, Br, I, CN) dianions are stable with the second electron in [B12(CN)11]2- bound by as much as 3.17 eV. More importantly, the stability of these dianions is found to have a significant effect on the activation of gas molecules such as CO2 and N2, providing a path toward the development of new catalysts.
RESUMO
Twisting has recently been demonstrated as an effective strategy for tuning the interactions between particles or quasi-particles in layered materials. Motivated by the recent experimental synthesis of pentagonal NiN2 sheet [ACS Nano 2021, 15, 13539], for the first time, the response of phonon coherence to twisting in bilayer penta-NiN2 , going beyond the particle-like phonon transport is studied. By using the unified theory of phonon transport and high order lattice anharmonicity, together with the self-consistent phonon theory, it is found that the lattice thermal conductivity is reduced by 80.6% from 33.35 to 6.47 W m-1 K-1 at 300 K when the layers are twisted. In particular, the contribution of phonon coherence is increased sharply by an order of magnitude, from 0.21 to 2.40 W m-1 K-1 , due to the reduced differences between the phonon frequencies and enhanced anharmonicity after the introduction of twist. The work provides a fundamental understanding of the phonon interaction in twisted pentagonal sheets.
RESUMO
Here, anion photoelectron spectroscopy and first-principles quantum chemistry are used to demonstrate to what degree Au can act as a surrogate for F in UF6 and its anion. Unlike UF6, UAu6 exhibits strong ligand-ligand, i.e., Au-Au, interactions, resulting in three low-lying isomers, two of which are three-dimensional while the third isomer has a ring-like quasi two-dimensional structure. Additionally, all the UAu6 isomers have open-shell electrons, which in nearly all cases are localized on the central U atom. The adiabatic electron affinity and vertical detachment energy are measured to be 3.05 ± 0.05 and 3.28 ± 0.05 eV, respectively, and are in very good agreement with calculations.
Assuntos
Elétrons , Ligantes , Espectroscopia Fotoeletrônica , Ânions/química , IsomerismoRESUMO
Superatoms, due to their various applications in redox and materials chemistry, have been a major topic of study in cluster science. Superhalogens constitute a special class of superatoms that mimic the chemistry of halogens and serve as building blocks of novel materials such as super and hyper salts, perovskite-based solar cells, solid-state electrolytes, and ferroelectric materials. These applications have led to a constant search for new class of superhalogens. In this study, using density functional theory, we show that recently synthesized [Si9{Si (tBu)2H}3] and [Si9{Si (TMS)3}3] Zintl clusters not only behave like halogens but also when functionalized with suitable ligands exhibit superhalogen characteristics. Frontier molecular orbital (FMO) analyses give insights into the electron-accepting nature of the Zintl clusters. Additional bonding techniques such as energy density at the bond critical point (BCP) and adaptive natural density partitioning (AdNDP) gives complementary information about the nature of bonding in Si9-based Zintl clusters. The potential of these Zintl clusters in the synthesis of new electrolytes in Li-ion batteries is also investigated.
RESUMO
Gold, although chemically inert in its bulk state, is reactive at the nanoscale and, in small clusters, even behaves like a hydrogen atom. Using a photoelectron spectroscopy experiment and first-principles theory, we show that Au also behaves like a halogen in small clusters. This is evident not only in strong resemblance between the photoelectron spectra of Au2F- and AuF2- but also in Au exhibiting one of the signature properties of halogens, its ability to form superhalogens with electron affinities higher than that of any halogen atom. For example, the electron affinity (EA) of Au2F- is 4.17 eV, while AuF2-, a known superhalogen, has an EA of 4.47 eV. Of particular interest is Au2F2, which, in spite of being a closed-shell system, is a pseudohalogen with an EA of 3.3 ± 0.1 eV. Here, one of the Au atoms behaves like a halogen, making Au2F2 mimic the property of AuF3.
RESUMO
Superhalogens, predicted 40 years ago, have attracted considerable attention due to their potential as building blocks of novel materials with various applications. While a large number of superhalogen clusters have been theoretically predicted and experimentally synthesized, they either require the use of a metal cation or electron counting rules. In particular, very rare endohedral cage clusters in defiance of the above requirements have been found to be superhalogens. In this work, motivated by recent experimental advances in endohedral cage clusters, we present a rational design principle for creating a new class of such superhalogens. Focusing on the chemical formula of A@Si20X20 (A = F, Cl, Br, I, BH4, BF4; X = H, F, Cl, Br, I, BO, CN, SCN, CH3), we use first-principles calculations to study 54 different clusters and show that these clusters possess electron affinities as high as 8.5 eV. Some of these clusters with X = BO and CN can even be stable as dianions, with large second electron affinity â¼2 eV. Similarly, Cl@C60 is found to be a superhalogen. This class of superhalogens is different from the conventional ones with chemical formula MXk+1, where X is a halogen and M is a cation with a formal +k oxidation state. Interestingly, the electron affinities of A@Si20X20 are almost independent of the central A moiety, but are guided by the functional group X. The potential of these endohedral superhalogens as electrolytes in Li-ion batteries is discussed.
RESUMO
Development of next-generation solid-state Li-ion batteries requires not only electrolytes with high room-temperature (RT) ionic conductivities but also a fundamental understanding of the ionic transport in solids. In spite of considerable work, only a few lithium conductors are known with the highest RT ionic conductivities ~ 0.01 S/cm and the lowest activation energies ~0.2 eV. New design strategy and novel ionic conduction mechanism are needed to expand the pool of high-performance lithium conductors as well as achieve even higher RT ionic conductivities. Here, we theoretically show that lithium conductors with RT ionic conductivity over 0.1 S/cm and low activation energies ~ 0.1 eV can be achieved by incorporating cluster-dynamics into an argyrodite structure. The extraordinary superionic metrics are supported by conduction mechanism characterized as a relay between local and long-range ionic diffusions, as well as correlational dynamics beyond the paddle-wheel effect.
RESUMO
Correction for 'Metallo-boranes: a class of unconventional superhalogens defying electron counting rules' by Huta Banjade et al., Nanoscale, 2022, 14, 1767-1778, DOI: 10.1039/D1NR06929B.
RESUMO
Superhalogens are a class of highly electronegative atomic clusters whose electron affinities exceed those of halogens. Due to their potential for promoting unusual reactions and role as weakly coordinating anions as well as building blocks of bulk materials, there has been considerable interest in their design and synthesis. Conventional superhalogens are composed of a metal atom surrounded by halogen atoms. Their large electron affinities are due to the fact that the added electron is distributed over all the halogen atoms, reducing electron-electron repulsion. Here, using density functional theory with a hybrid exchange-correlation functional, we show that a new class of superhalogens can be developed by doping closo-boranes (e.g., B12H12) with selected metal atoms such as Zn and Al as well as by replacing a B atom with Be or C. Strikingly, these clusters defy electron counting rules. For example, according to the Wade-Mingos rule, Zn(B12H12) and Al(BeB11H12) are closed-shell systems that should be chemically inert and, hence, should have very small electron affinities. Similarly, Zn(B12H11), Al(B12H12), and Zn(CB11H12), with one electron more than needed for electronic shell closure, should behave like superalkalis. Yet, all these clusters are superhalogens. This unexpected behavior originates from an entirely different mechanism where the added electron resides on the doped metal atom that is positively charged due to electron transfer.
RESUMO
Superhalogens are nanoclusters with high electron affinities, exhibiting behavior similar to that of halogens. Their dimerization yields nonpolar symmetrical clusters, akin to diatomic halogen molecules, and they are unstable in the condensed phase in the absence of charge-compensating cations. Herein, we provide ab initio evidence that SbCl4 superhalogen is an exception: its dimerization yields a polar cluster that can be viewed as a quasi-bonded [SbCl5]δ- and [SbCl3]δ+ Lewis acid-base cluster. The symmetry breaking arises from the valence stratification of Sb into Sb5+ and Sb3+ as well as their lone pair electrons. When assembled, SbCl4 clusters form a supercrystal that is thermodynamically stable up to 600 K, with the unique bonding feature of Sb2Cl8 prevailing in the bulk phase. Combination of mixed valence and lone pair electrons leads to electric polarizations along all directions, generating a type of unconventional multimode ferroelectricity in which three different modes of ferroelectricity with distinct magnitudes and Curie temperature are revealed.
RESUMO
Functionalization of metal-chalcogenide clusters by either replacing core atoms or by tuning the ligand is a powerful technique to tailor their properties. Central to this approach is understanding the competition between the strength of the metal-ligand and metal-metal interactions. Here, using collision-induced dissociation of atomically precise metal sulfide nanoclusters, Co5MS8L6+ (L = PEt3, M = Mn, Fe, Co, Ni) and Co5-xFexS8L6+ (x = 1-3), we study the effect of a heteroatom incorporation on the core-ligand interactions and relative stability towards fragmentation. Sequential ligand loss is the dominant dissociation pathway that competes with ligand sulfide (LS) loss. Because the ligands are attached to metal atoms, LS loss is an unusual dissociation pathway, indicating significant rearrangement of the core prior to fragmentation. Both experiments and theoretical calculations indicate the reduced stability of Co5MnS8L6+ and Co5FeS8L6+ towards the first ligand loss in comparison with their Co6S8L6+ and Co5NiS8L6+ counterparts and provide insights into the core-ligand interaction.
RESUMO
Inspired by the recently synthesized covalent organic framework (COF) containing triquinoxalinylene and benzoquinone units (TQBQ) in the skeleton, we study the stability and properties of its two-dimensional analogue, TQBQCOF, and examine its potential for the synthesis of ammonia using first-principles calculations. We show that the TQBQCOF sheet is mechanically, dynamically, and thermally stable up to 1200 K. It is a semiconductor with a direct band gap of 2.70 eV. We further investigate the electrocatalytic reduction of N2to NH3on the Boron-functionalized TQBQCOF sheet (B/TQBQCOF). The rate-determining step of the catalytic pathways is found to be *N-N â *N-NH for the distal, alternating, and enzymatic catalytic mechanisms, with the corresponding overpotentials of 0.65, 0.65, and 0.07 V, respectively. The value of 0.07 V is the lowest required voltage among all of the N2 reduction catalysts reported so far, showing the potential of B/TQBQCOF as a metal-free catalyst to effectively reduce N2to NH3.