RESUMO
The reorientational dynamics of Y(BH4)3·xNH3 (x = 0, 3, and 7) was studied using quasielastic neutron scattering (QENS) and neutron spin echo (NSE). The results showed that changing the number of NH3 ligands drastically alters the reorientational mobility of the BH4- anion. From the QENS experiments, it was determined that the BH4- anion performs 2-fold reorientations around the C2 axis in Y(BH4)3, 3-fold reorientations around the C3 axis in Y(BH4)3·3NH3, and either 2-fold reorientations around the C2 axis or 3-fold reorientations around the C3 axis in Y(BH4)3·7NH3. The relaxation time of the BH4- anion at 300 K decreases from 2 × 10-7 s for x = 0 to 1 × 10-12 s for x = 3 and to 7 × 10-13 s for x = 7. In addition to the reorientational dynamics of the BH4- anion, it was shown that the NH3 ligands exhibit 3-fold reorientations around the C3 axis in Y(BH4)3·3NH3 and Y(BH4)3·7NH3 as well as 3-fold quantum mechanical rotational tunneling around the same axis at 5 K. The new insights constitute a significant step toward understanding the relationship between the addition of ligands and the enhanced ionic conductivity observed in systems such as LiBH4·xNH3 and Mg(BH4)2·xCH3NH2.
RESUMO
The structure and reorientational dynamics of KB3H8 were studied by using quasielastic and inelastic neutron scattering, Raman spectroscopy, first-principles calculations, differential scanning calorimetry, and in situ synchrotron radiation powder X-ray diffraction. The results reveal the existence of a previously unknown polymorph in between the α'- and ß-polymorphs. Furthermore, it was found that the [B3H8]- anion undergoes different reorientational motions in the three polymorphs α, α', and ß. In α-KB3H8, the [B3H8]- anion performs 3-fold rotations in the plane created by the three boron atoms, which changes to a 2-fold rotation around the C 2 symmetry axis of the [B3H8]- anion upon transitioning to α'-KB3H8. After transitioning to ß-KB3H8, the [B3H8]- anion performs 4-fold rotations in the plane created by the three boron atoms, which indicates that the local structure of ß-KB3H8 deviates from the global cubic NaCl-type structure. The results also indicate that the high reorientational mobility of the [B3H8]- anion facilitates the K+ cation conductivity, since the 2-orders-of-magnitude increase in the anion reorientational mobility observed between 297 and 311 K coincides with a large increase in K+ conductivity.
RESUMO
BACKGROUND AND PURPOSE: Brain tumor clinical trials requiring solid tumor assessment typically rely on the 2D manual delineation of enhancing tumors by ≥2 expert readers, a time-consuming step with poor interreader agreement. As a solution, we developed quantitative dT1 maps for the delineation of enhancing lesions. This retrospective analysis compares dT1 with 2D manual delineation of enhancing tumors acquired at 2 time points during the post therapeutic surveillance period of the American College of Radiology Imaging Network 6677/Radiation Therapy Oncology Group 0625 (ACRIN 6677/RTOG 0625) clinical trial. MATERIALS AND METHODS: Patients enrolled in ACRIN 6677/RTOG 0625, a multicenter, randomized Phase II trial of bevacizumab in recurrent glioblastoma, underwent standard MR imaging before and after treatment initiation. For 123 patients from 23 institutions, both 2D manual delineation of enhancing tumors and dT1 datasets were evaluable at weeks 8 (n = 74) and 16 (n = 57). Using dT1, we assessed the radiologic response and progression at each time point. Percentage agreement with adjudicated 2D manual delineation of enhancing tumor reads and association between progression status and overall survival were determined. RESULTS: For identification of progression, dT1 and adjudicated 2D manual delineation of enhancing tumor reads were in perfect agreement at week 8, with 73.7% agreement at week 16. Both methods showed significant differences in overall survival at each time point. When nonprogressors were further divided into responders versus nonresponders/nonprogressors, the agreement decreased to 70.3% and 52.6%, yet dT1 showed a significant difference in overall survival at week 8 (P = .01), suggesting that dT1 may provide greater sensitivity for stratifying subpopulations. CONCLUSIONS: This study shows that dT1 can predict early progression comparable with the standard method but offers the potential for substantial time and cost savings for clinical trials.
Assuntos
Neoplasias Encefálicas/diagnóstico por imagem , Glioblastoma/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética/métodos , Neuroimagem/métodos , Adulto , Idoso , Antineoplásicos Imunológicos/uso terapêutico , Bevacizumab/uso terapêutico , Neoplasias Encefálicas/tratamento farmacológico , Neoplasias Encefálicas/patologia , Feminino , Glioblastoma/tratamento farmacológico , Glioblastoma/patologia , Humanos , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Carga TumoralRESUMO
Anaerobic hydrolysis in activated return sludge was investigated in laboratory scale experiments to find if intermittent aeration would accelerate anaerobic hydrolysis rates compared to anaerobic hydrolysis rates under strict anaerobic conditions. The intermittent reactors were set up in a 240 h experiment with intermittent aeration (3 h:3 h) in a period of 24 h followed by a subsequent anaerobic period of 24 h in a cycle of 48 h which was repeated five times during the experiment. The anaerobic reactors were kept under strict anaerobic conditions in the same period (240 h). Two methods for calculating hydrolysis rates based on soluble chemical oxygen demand were compared. Two-way analysis of variance with the Bonferroni post-test was performed in order to register any significant difference between reactors with intermittent aeration and strictly anaerobic conditions respectively. The experiment demonstrated a statistically significant difference in favor of the reactors with intermittent aeration showing a tendency towards accelerated anaerobic hydrolysis rates due to application of intermittent aeration. The conclusion of the work is thus that intermittent aeration applied in the activated return sludge process can improve the treatment capacity further in full scale applications.
Assuntos
Bactérias/metabolismo , Reatores Biológicos/microbiologia , Esgotos/microbiologia , Anaerobiose , Biodegradação Ambiental , Análise da Demanda Biológica de Oxigênio , Hidrólise , Esgotos/químicaRESUMO
The reactions between metal borohydrides and elemental sulfur are investigated in situ during thermal treatment and are found to be highly exothermic (up to 700 J g(-1)). These reactions are exceptionally rapid, occurring below 200 °C, also resulting in the sudden release of substantial quantities of hydrogen gas. For NaBH4 this hydrogen release is pure, with no detectable levels of H2S or B2H6. The reaction results in the formation of an array of metal-boron-sulfur compounds. These MBH4-S compounds are interesting for possible uses in high energy applications (fuels or explosives), hydrogen generation, and metal-boron-sulfur precursors.
RESUMO
The five novel compounds ALiM(BH4)4 (A = K or Rb; M = Mg or Mn) and K3Li2Mg2(BH4)9 crystallizing in the space groups Aba2 and P2/c, respectively, represent the first two-dimensional topologies amongst homoleptic borohydrides. The crystal structures have been solved, refined and characterized by synchrotron X-ray powder diffraction, neutron powder diffraction and solid-state DFT calculations. Minimal energies of ordered models corroborate crystal symmetries retrieved from diffraction data. The layered Li-Mg substructure forms negatively charged uninodal 4-connected networks. It is shown that this connectivity cannot generate the long sought-after, bimetallic Li-Mg borohydrides without countercations when assuming preferred coordination polyhedra as found in Mg(BH4)2 and LiBH4. The general properties of the trimetallic compound series are analogous with the anhydrous aluminosilicates. Additionally, a relationship with zeolites is suggested, which are built from three-dimensional Al-Si-O networks with a negative charge on them. The ternary metal borohydride systems are of interest due to their potential as novel hydridic frameworks and will allow exploration of the structural chemistry of light-metal systems otherwise subject to eutectic melting.
RESUMO
The decomposition pathways for the composite LiAlH4-LiNH2 in different ratios of (1 : 1), (1 : 1.5), (1 : 2) and (1 : 2.5) have been systematically studied using in situ synchrotron radiation powder X-ray diffraction (SR-PXD) as well as simultaneous thermogravimetric analysis and differential scanning calorimetry coupled with mass spectroscopy. The study reveals that LiAlH4 decomposes in two steps to LiH, Al and H2 and, subsequently, the produced LiH reacts with LiNH2 forming Li2NH and H2. A new intermediate, Li(4-x)Al(x)(NH)(2-2x)N(2x), is observed during the decomposition of LiAlH4-LiNH2 (1 : 1.5), (1 : 2) and (1 : 2.5), formed from Li2NH and Al prior to the formation of Li3AlN2. Li(4-x)Al(x)(NH)(2-2x)N(2x) is characterized by Rietveld refinement of SR-PXD data and solid-state (27)Al MAS NMR spectroscopy (chemical shift, δ(Al) = 125 ppm) and both techniques reveal a maximum value for x of ~0.10, i.e., Li(3.90)Al(0.10)(NH)(1.80)N(0.20). The solid solution Li(4-x)Al(x)(NH)(2-2x)N(2x) crystallizes in a cubic unit cell, a = 4.9854(7) Å with space group Fm3m, similar to the crystal structure for Li2NH and is a rare type with both cation and anion disorder. For LiAlH4-LiNH2 (1 : 1) 8.7 wt% of H2 is released during heating from RT to 500 °C, while for LiAlH4-LiNH2 composites with molar ratios of LiNH2 higher than 0.5 the release of both H2 and NH3 is observed.
RESUMO
Two novel alkali earth borohydrides, Sr(BH4)2 and Sr(BH4)Cl, have been synthesized and investigated by in-situ synchrotron radiation powder X-ray diffraction (SR-PXD) and Raman spectroscopy. Strontium borohydride, Sr(BH4)2, was synthesized via a metathesis reaction between LiBH4 and SrCl2 by two complementary methods, i.e., solvent-mediated and mechanochemical synthesis, while Sr(BH4)Cl was obtained from mechanochemical synthesis, i.e., ball milling. Sr(BH4)2 crystallizes in the orthorhombic crystal system, a = 6.97833(9) Å, b = 8.39651(11) Å, and c = 7.55931(10) Å (V = 442.927(10) Å(3)) at RT with space group symmetry Pbcn. The compound crystallizes in α-PbO2 structure type and is built from half-occupied brucite-like layers of slightly distorted [Sr(BH4)6] octahedra stacked in the a-axis direction. Strontium borohydride chloride, Sr(BH4)Cl, is a stoichiometric, ordered compound, which also crystallizes in the orthorhombic crystal system, a = 10.8873(8) Å, b = 4.6035(3) Å, and c = 7.4398(6) Å (V = 372.91(3) Å(3)) at RT, with space group symmetry Pnma and structure type Sr(OH)2. Sr(BH4)Cl dissociates into Sr(BH4)2 and SrCl2 at ~170 °C, while Sr(BH4)2 is found to decompose in multiple steps between 270 and 465 °C with formation of several decomposition products, e.g., SrB6. Furthermore, partly characterized new compounds are also reported here, e.g., a solvate of Sr(BH4)2 and two Li-Sr-BH4 compounds.
RESUMO
Hydrogen-fluorine exchange in the NaBH4-NaBF4 system is investigated using a range of experimental methods combined with DFT calculations and a possible mechanism for the reactions is proposed. Fluorine substitution is observed using in situ synchrotron radiation powder X-ray diffraction (SR-PXD) as a new Rock salt type compound with idealized composition NaBF2H2 in the temperature range T = 200 to 215 °C. Combined use of solid-state (19)F MAS NMR, FT-IR and DFT calculations supports the formation of a BF2H2(-) complex ion, reproducing the observation of a (19)F chemical shift at -144.2 ppm, which is different from that of NaBF4 at -159.2 ppm, along with the new absorption bands observed in the IR spectra. After further heating, the fluorine substituted compound becomes X-ray amorphous and decomposes to NaF at ~310 °C. This work shows that fluorine-substituted borohydrides tend to decompose to more stable compounds, e.g. NaF and BF3 or amorphous products such as closo-boranes, e.g. Na2B12H12. The NaBH4-NaBF4 composite decomposes at lower temperatures (300 °C) compared to NaBH4 (476 °C), as observed by thermogravimetric analysis. NaBH4-NaBF4 (1:0.5) preserves 30% of the hydrogen storage capacity after three hydrogen release and uptake cycles compared to 8% for NaBH4 as measured using Sievert's method under identical conditions, but more than 50% using prolonged hydrogen absorption time. The reversible hydrogen storage capacity tends to decrease possibly due to the formation of NaF and Na2B12H12. On the other hand, the additive sodium fluoride appears to facilitate hydrogen uptake, prevent foaming, phase segregation and loss of material from the sample container for samples of NaBH4-NaF.
RESUMO
Mono-layers of lipids and their interaction with surface active enzymes (lipases) have been studied for more than a century. During the past decade new insight into this area has been obtained due to the development of scanning probe microscopy. This novel method provides direct microscopic information about the system in question and allows in situ investigations under near physiological conditions. In the present review the theory, experimental set-up and sample requirements of atomic force microscopy (AFM) are described. An overview of recent results is also presented with special emphasis on lipase hydrolysis and kinetics investigated in situ using AFM.
Assuntos
Bioquímica/métodos , Lipase/química , Lipídeos/química , Microscopia de Força Atômica/instrumentação , Microscopia de Força Atômica/métodos , 1,2-Dipalmitoilfosfatidilcolina/química , Hidrólise , Cinética , Lipase/metabolismo , Bicamadas Lipídicas , Metabolismo dos Lipídeos , Modelos Biológicos , Fosfolipases A/química , Ligação Proteica , Fatores de TempoRESUMO
Monolayers of lipids have been studied for more than a century. During the past decade new insight into the field has resulted from the development of surface sensitive X-ray scattering methods utilizing synchrotron radiation: grazing-incidence X-ray diffraction (GIXD) and specular X-ray reflectivity (XR). These novel methods provide direct microscopic information about the systems in question and allow in situ investigations under near physiological conditions. GIXD gives information about the in-plane molecular structure, e.g., lattice symmetry and structural parameters; XR provides the electron density profile across the interface. The present review describes the theory, experimental procedures and sample requirements for surface sensitive X-ray scattering. An overview of recent results is presented as well, with special emphasis on biologically important systems, e.g., investigations by GIXD and/or XR of lipid and protein structures at interfaces and of lipid/protein interactions.
Assuntos
Bioquímica/métodos , Lipase/química , Lipídeos/química , Espalhamento de Radiação , Difração de Raios X/instrumentação , Difração de Raios X/métodos , Ar , Aminoácidos/química , Elétrons , Concentração de Íons de Hidrogênio , Peptídeos/química , Ligação Proteica , Temperatura , Água/química , Raios XRESUMO
We present the synthesis as well as the structural and electronic properties of an amphiphilic derivative of hexaalkylhexa-peri-hexabenzocoronene (HBC), which contains one alkyl substituent that is terminated with a carboxylic acid group. The molecules form well-defined Langmuir films when spread from a solution at the air-water interface. Grazing-incidence X-ray diffraction (GIXD) and X-ray reflectivity studies of the Langmuir monolayer reveal two crystallographic phases at room temperature which depend on the surface pressure applied to the film. Scattering from very well-ordered (zeta = 200-400 A) pi-stacked lamellae of HBC molecules tilted approximately 45 degrees relative to the surface normal is observed in the low-pressure phase. In this phase, the HBC molecules pack in a rectangular two-dimensional unit cell with a = 22.95 A and b = 4.94 A. In the high-pressure phase, coherence from the pi stack is lost. This is a consequence of stress induced by the crystallization of the substituent alkyl chains into a hexagonal lattice, which has a trimerized superstructure in one direction: a = 3 x b = 15.78 A, b = 5.26 A, gamma = 120 degrees, A = 71.9 A2 = 3 x 23.9 A2. Thin monolayer films can be transferred to solid supports by the Langmuir-Blodgett (LB) technique. Atomic force microscopy (AFM) with atomic resolution reveals the crystalline packing of alkyl chains in the high-pressure phase. Kelvin force microscopy (KFM) shows a clear potential difference between the high- and low-pressure phases. This is discussed in terms of orbital delocalization (band formation) in the highly coherent low-pressure phase, which is in contrast to the localized molecular orbitals present in the high-pressure phase. The highly coherent pi stack is expected to sustain a very high charge-carrier mobility.
RESUMO
A new rubidium zinc hydrogen phosphate, Rb2Zn2(HPO4)3, is prepared by an unusual method utilizing long nucleation times. This material is crystallized from a gel with an initial composition of 1.0 ZnO/0.94 P2O5/0.96 Rb2O/0.04 Li2O/41 H2O, while the phosphate concentration equals 1.6 M and pH = 3.5. The gel is placed in a sealed Pyrex flask at 52 degrees C, and after 4.5 months crystallization of Rb2Zn2(HPO4)3 is noticed. This new crystalline compound has a three-dimensional framework structure built from spiral chains of alternating PO4 and ZnO4 tetrahedra connected pairwise and assembled by other PO4 tetrahedra, rubidium ions, and hydrogen bonds. The two rubidium ions, Rb(1) and Rb(2), have an exceptionally low number of oxygen contacts in the first coordination sphere, five and seven, respectively. Crystal data: monoclinic, P2(1)/c (no. 14), a = 12.5880(4), b = 12.7170(8), c = 7.5827(8) A, beta = 96.100(1) degrees, Z = 4. A single-crystal 31P NMR investigation of Rb2Zn2(HPO4)3 was performed employing a two-axis goniometer probe and reveals the presence of three chemically and six magnetically nonequivalent phosphorus sites, in accordance with the crystal structure. 31P chemical shielding anisotropies and isotropic chemical shifts (-3.3(3), -2.6(3), and 2.0(3) ppm) have been determined for the three phosphorus sites.
RESUMO
Small conductive polymer force sensors were attached to the distal phalangeal pads for measuring individual finger forces exerted during submaximal static pinch. A linear force summing strain gauge dynamometer for measuring resultant five-finger pinch force was grasped vertically using a neutral wrist posture. Individual finger forces were measured at fixed total pinch force levels of 10%, 20%, and 30% of maximum voluntary exertion using pinch spans of 45 mm and 65 mm. Total pinch force and individual finger forces were also measured while similarly grasping the dynamometer and supporting fixed weights for 1.0 kg, 1.5 kg, and 2.0 kg loads using pinch spans of 45 mm and 65 mm. The index and middle fingers exerted more than 3 N greater average force than the ring and small fingers for the fixed total pinch force task. No significant individual finger force differences were observed at the 10% maximum voluntary exertion level, however both the index and middle fingers exerted more than 5 N greater force than the ring and small fingers at the 30% maximum voluntary exertion level. The average contribution of the index, middle, ring, and small fingers were 33%, 33%, 17%, and 15%, respectfully, for the fixed total pinch force task. As exertion level increased from 10% to 30%, the contribution of the middle finger was not constant increasing from 25% to 38%. Total pinch force increased from 15 N to 30 N when the load weight increased from 1.0 kg to 2.0 kg.(ABSTRACT TRUNCATED AT 250 WORDS)
Assuntos
Dedos/fisiologia , Contração Isométrica/fisiologia , Destreza Motora/fisiologia , Adolescente , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Articulações/fisiologia , Masculino , Processamento de Sinais Assistido por Computador/instrumentaçãoRESUMO
This paper describes the construction and use of a durable and thin force sensor that can be attached to the palmar surface of the fingers and hands for studying the biomechanics of grasp and for use in hand injury rehabilitation. These force sensors were constructed using a modified commercially available conductive polymer pressure sensing element and installing an epoxy dome for directing applied forces through a 12 mm diameter active sensing area. The installation of an epoxy dome was effective for making the sensors insensitive to contact surfaces varying from 25 to 1100 mm2 and a 16 mm radius surface curved convex towards the finger. The completed sensors were only 1.8 mm thick and capable of being taped to the distal phalangeal finger pads. They were calibrated on the hand by pinching a strain gage dynamometer. The useful range was between 0 and 30 N with an accuracy of 1 N for both static loading and normal dynamic grasp activities. The sensor time constant was 0.54 ms for a step force input. Because of varying offset voltages every time the sensors were attached, these sensors should be calibrated on the hand before each use. The sensors were used for measuring finger forces during controlled pinching and lifting tasks, and during ordinary grasping activities, such as picking up a book or a box, where the useful force range and response for these sensors were adequate.