Revitalizing Oxygen Reduction Reactivity of Composite Oxide Electrodes via Electrochemically Deposited PrOx Nanocatalysts.

Solid oxide fuel cells that operate at intermediate temperatures require efficient catalysts to enhance the inherently poor electrochemical activity of the composite electrodes. Here, a simple and practical electrochemical deposition method is presented for fabricating a PrOx overlayer on lanthanum strontium manganite-yttria-stabilized zirconia (LSM-YSZ) composite electrodes. The method requires less than four minutes for completion and can be carried out under at ambient temperature and pressure. Crucially, the treatment significantly improves the electrode's performance without requiring heat treatment or other supplementary processes. The PrOx-coated LSM-YSZ electrode exhibits an 89% decrease in polarization resistance at 650 °C (compared to an untreated electrode), maintaining a tenfold reduction after ≈400 h. Transmission line model analysis using impedance spectra confirms how PrOx coating improved the oxygen reduction reaction activity. Further, tests with anode-supported single cells reveal an outstanding peak power density compared to those of other LSM-YSZ-based cathodes (e.g., 418 mW cm-2 at 650 °C). Furthermore, it is demonstrated that multicomponent coating, such as (Pr,Ce)Ox, can also be obtained with this method. Overall, the observations offer a promising route for the development of high-performance solid oxide fuel cells.

Simultaneous Performance and Stability Enhancement in Intermediate Temperature Solid Oxide Fuel Cells by Powder-Atomic Layer Deposited LSCF@ZrO2 Cathodes.

Employing porous structures is essential in high-performance electrochemical energy devices. However, obtaining uniform functional coatings on high-tortuosity structures can be challenging, even with specialized processes such as atomic layer deposition (ALD). Herein, a novel method for achieving a porous composite electrode for solid oxide fuel cells by coating La0.6 Sr0.4 Co0.2 Fe0.8 O3 -δ (LSCF) powders with ZrO2 using a powder ALD process is presented. Unlike conventional ALD, powder ALD can be used to fabricate extremely uniform coatings on porous electrodes with a thickness of tens of micrometers. The powder ALD ZrO2 coating is found to effectively suppress chemical degradation of the LSCF electrodes. The cell with the powder ALD coated cathode shows a 2.2 times higher maximum power density and 60% lower thermal degradation in activation resistance than the bare LSCF cathode cell at 700-750 °C. The result demonstrated in this study is expected to have significant implications for high-performance and durable electrodes in energy conversion/storage devices.

Maximizing Photoelectrochemical Performance in Metal-Oxide Hybrid Composites via Amorphous Exsolution-A New Exsolution Mechanism for Heterogeneous Catalysis.

Exsolution generates metal nanoparticles anchored within crystalline oxide supports, ensuring efficient exposure, uniform dispersion, and strong nanoparticle-perovskite interactions. Increased doping level in the perovskite is essential for further enhancing performance in renewable energy applications; however, this is constrained by limited surface exsolution, structural instability, and sluggish charge transfer. Here, hybrid composites are fabricated by vacuum-annealing a solution containing SrTiO3 photoanode and Co cocatalyst precursors for photoelectrochemical water-splitting. In situ transmission electron microscopy identifies uniform, high-density Co particles exsolving from amorphous SrTiO3 films, followed by film-crystallization at elevated temperatures. This unique process extracts entire Co dopants with complete structural stability, even at Co doping levels exceeding 30%, and upon air exposure, the Co particles embedded in the film oxidize to CoO, forming a Schottky junction at the interface. These conditions maximize photoelectrochemical activity and stability, surpassing those achieved by Co post-deposition and Co exsolution from crystalline oxides. Theoretical calculations demonstrate in the amorphous state, dopant─O bonds become weaker while Ti─O bonds remain strong, promoting selective exsolution. As expected from the calculations, nearly all of the 30% Fe dopants exsolve from SrTiO3 in an H2 environment, despite the strong Fe─O bond's low exsolution tendency. These analyses unravel the mechanisms driving the amorphous exsolution.

Nanoscale interface engineering for solid oxide fuel cells using atomic layer deposition.

Atomic layer deposition (ALD), which is already actively used in the semiconductor industry, has been in the spotlight in various energy fields, such as batteries and fuel cells, given its unique ability to enable the nanoscale deposition of diverse materials with a variety of compositions onto complex 3D structures. In particular, with regard to ceramic fuel cells, ALD has attracted attention because it facilitates the manufacturing of thin and dense electrolytes. Furthermore, recently, electrode surfaces and electrode/electrolyte interface modification are arising as new research strategies to fabricate robust fuel cells. In this mini-review, we present a brief overview of ALD and recent studies that utilize ALD in ceramic fuel cells, such as manufacturing thin film electrolytes, stabilizing electrodes, functionalizing electrodes, and modifying the chemistry of electrode surfaces. We also propose research directions to expand the utility and functionality of the ALD techniques.

In vitro effects of conditioned medium from bioreactor cultured human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) on skin-derived cell lines.

INTRODUCTION: When stem cells are grafted into tissues, they differentiate and form specialized cells. However, the proficiency of stem cells to endure and assimilate the host cell is dependent on various growth factors and cytokines. According to various studies, these factors are available in the spent media of harvested stem cells, which can be used for treatment in regenerative medicine and cosmetic products. There are differences in cytokine secretion depending on the culture environment, which are clarified in this paper. METHODS: Human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) were cultured either in a bioreactor or in a flask. The conditioned medium from the hUC-MSC cultures in the flask and in the bioreactor was designated as "FM" and "BM", respectively. We assessed the effects of FM and BM on UVB-induced oxidative stress, anti-aging, and melanogenic properties. The amount of growth factors, cell viability, hyaluronic acid (HA), pro-collagen, and pro-melanin were quantitatively evaluated in the FM and BM treated groups. The induction of HA and collagen synthesis was measured in CCD-986SK cells. For melanogenesis, the effects of FM and BM on melanin content and tyrosinase activity were measured in SK-MEL-31 cells. RESULTS: In the present study, the secretion of growth factors, HA, and pro-collagen was significantly higher in the BM treatment, compared to that in the FM treatment. BM protected CCD-986SK cells against death from UVB induced oxidative stress. BM increased the promoter activity of the anti-oxidant genes SOD1, CAT, and GP; and downregulated the accelerating collagen decomposition gene, MMP-1, induced by UVB irradiation. In α-melanocyte-stimulating hormone (α-MSH) stimulated SK-MEL-31 cells, BM reduced melanin production and decreased the levels of MITF, tyrosinase, TRP-1, and TRP-2. These results suggest that BM could be used as a skin protection agent, because of its anti-apoptotic, anti-aging, and anti-melanogenic properties. This could be attributed to the differences in culturing methods; it is difficult to maintain the temperature and sterility in FM culture, when compared to that in the automated culturing conditions of the BM system. CONCLUSIONS: Collectively, our results indicate that using BM-conditioned hUC-MSC medium is very efficient process for producing raw materials for developing functional cosmetics.

Antioxidant and Anti-Inflammatory Effects of Bischofia javanica (Blume) Leaf Methanol Extracts through the Regulation of Nrf2 and TAK1.

Bischofia javanica (Blume) has been traditionally used to treat inflammatory diseases such as tonsillitis and ulcers throughout Asia, including China, Indonesia, and the Philippines: however, the molecular mechanisms by which B. javanica exerts its antioxidant and anti-inflammatory properties remain largely unknown. In this study, we analyzed the antioxidant and anti-inflammatory mechanisms of methanol extracts of B. javanica leaves (MBJ) in vitro and in vivo. MBJ decreased nitric oxide (NO) production and the expression of pro-inflammatory cytokines, including interleukin (IL)-1ß, IL-6, and tumor necrosis factor-α, in lipopolysaccharide (LPS)-treated RAW 264.7 cells. The observed suppression of inflammatory responses by MBJ was correlated with an inhibition of the nuclear factor-κB (NF-κB) and the mitogen-activated protein kinase (MAPK) pathways. Additionally, MBJ induced nuclear translocation of the nuclear factor erythroid 2-related factor 2 (Nrf2), a transcription factor that upregulates the expression of anti-inflammatory and antioxidant genes. Furthermore, MBJ exhibited antioxidant and anti-inflammatory effects in an acute hepatitis mouse model. In conclusion, our results confirm the medicinal properties of B. javanica, and therefore MBJ could be applied to improve inflammatory and redox imbalances in different types of pathologies.

Clinical prognostic factors for radical cystectomy in bladder cancer.

PURPOSE: We investigated the effects of radical cystectomy and the prognostic factors that affect the survival of bladder cancer patients. MATERIALS AND METHODS: From 1979 to 2002, 59 patients with long-term follow up results of at least 2 years were enrolled in this study. Indications for surgery included muscle invasive bladder cancer and high-risk superficial bladder cancer. The cancer specific and recurrence free survival rates with respect to the possible prognostic factors were determined using Kaplan-Meier statistics. RESULTS: The mean patient age was 62.8 years (M: 48, F: 11), and the estimated 5- and 10-year survival rates were 62% and 39.4%, respectively. The median time to local or systemic recurrence was 16 months (range: 5 approximately 100), and the average survival durations after local and systemic recurrence were 14.4 months and 12.7 months, respectively. Pathologic stage, tumor grade, mean nuclear area, sex and lymphatic invasion were significant factors by univariate analysis (p<0.05). The disease related survival rate in patients having progression from an initial superficial tumor was lower than for those patients who displayed muscle invasive disease at the initial treatment. Multivariate analysis identified pathologic stage and lymphatic invasion as independent prognostic factors. CONCLUSIONS: Radical cystectomy for organ-confined cancer showed favorable 5- and 10-year survival rates. The survival rate for patients with progression from an initial superficial tumor was worse than for those patients with invasive tumor at the initial presentation. The most significant independent prognostic factors were the pathologic stage and the presence of lymphatic invasion, which were highly correlated with all the investigated disease endpoints.