Degradation of dissolved sulfide in water using multi-hole dielectric barrier discharge.

Biogas obtained from livestock manure is used as fuel for solid oxide fuel cells. Although H2S is a typical biogas, it is a fatal disadvantage for fuel-cell power generation and, thus, must be removed. In this study, we proposed an effective method for sulfide removal from water using a multi-hole dielectric barrier discharge (DBD) system. In this system, active species, such as ozone, ultraviolet rays, hydroxyl radicals, and hydrogen peroxide, were simultaneously generated. Under optimal conditions, dissolved sulfide (initial concentration: 120 mg/L) was completely degraded within 10 min in air plasma and 6 min in oxygen plasma. Changes in the physical properties of the sulfide-treated water were confirmed by measuring the pH, oxidation-reduction potential, and dissolved oxygen. Results of the by-product analysis showed that sulfide was converted into sulfate by reacting with a large amount of ozone, and the active species were emitted from the multi-hole DBD system. In summary, multi-hole DBD technology has demonstrated merit as a water-contaminant purification technology and for the removal of dissolved sulfide.

Facile Fabrication of TiO2 Quantum Dots-Anchored g-C3N4 Nanosheets as 0D/2D Heterojunction Nanocomposite for Accelerating Solar-Driven Photocatalysis.

TiO2 semiconductors exhibit a low catalytic activity level under visible light because of their large band gap and fast recombination of electron-hole pairs. This paper reports the simple fabrication of a 0D/2D heterojunction photocatalyst by anchoring TiO2 quantum dots (QDs) on graphite-like C3N4 (g-C3N4) nanosheets (NSs); the photocatalyst is denoted as TiO2 QDs@g-C3N4. The nanocomposite was characterized via analytical instruments, such as powder X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, t orange (MO) under solar light were compared. The TiO2 QDs@g-C3N4 photocatalyst exhibited 95.57% MO degradation efficiency and ~3.3-fold and 5.7-fold higher activity level than those of TiO2 QDs and g-C3N4 NSs, respectively. Zero-dimensional/two-dimensional heterojunction formation with a staggered electronic structure leads to the efficient separation of photogenerated charge carriers via a Z-scheme pathway, which significantly accelerates photocatalysis under solar light. This study provides a facile synthetic method for the rational design of 0D/2D heterojunction nanocomposites with enhanced solar-driven catalytic activity.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection.

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

Controlled Band Offsets in Ultrathin Hematite for Enhancing the Photoelectrochemical Water Splitting Performance of Heterostructured Photoanodes.

Formation of type II heterojunctions is a promising strategy to enhance the photoelectrochemical performance of water-splitting photoanodes, which has been tremendously studied. However, there have been few studies focusing on the formation of type II heterojunctions depending on the thickness of the overlayer. Here, enhanced photoelectrochemical activities of a Fe2O3 film deposited-BiVO4/WO3 heterostructure with different thicknesses of the Fe2O3 layer have been investigated. The Fe2O3 (10 nm)/BiVO4/WO3 heterojunction photoanode shows a much higher photocurrent density compared to the Fe2O3 (100 nm)/BiVO4/WO3 photoanode. The Fe2O3 (10 nm)/BiVO4/WO3 trilayer heterojunction anodes have sequential type II junctions, while a thick Fe2O3 overlayer forms an inverse type II junction between Fe2O3 and BiVO4. Furthermore, the incident-photon-to-current efficiency measured under back-illumination is higher than those measured under front-illumination, demonstrating the importance of the illumination sequence for light absorption and charge transfer and transport. This study shows that the thickness of the oxide overlayer influences the energy band alignment and can be a strategy to improve solar water splitting performance. Based on our findings, we propose a photoanode design strategy for efficient photoelectrochemical water splitting.

Functional recovery by colon organoid transplantation in a mouse model of radiation proctitis.

Radiation proctitis is the collateral damage that occurs to healthy cells during radiation treatment of pelvic malignancies. Conservative treatment of radiation proctitis can mitigate inflammatory symptoms, but, to date, no therapeutic options are available for direct recovery of the damaged colonic epithelium. The present study assessed the ability of colon organoid-based regeneration to treat radiation proctitis. Radiation proctitis was induced in mice by irradiating their recta, followed by enema-based transplantation of mouse colon organoids. The transplanted colon organoids were found to successfully engraft onto the damaged rectal mucosa of the irradiated mice, reconstituting epithelial structure and integrity. Lgr5+ stem cells were shown to be pivotal to colon organoid mediated regeneration. Endoscopic examination showed the efficacy of localized transplantation of colon organoids with fibrin glue to irradiated sites. These findings provide useful insights into the use of colon organoid-based regenerative therapy for the treatment of radiation proctitis.

Establishment of functional epithelial organoids from human lacrimal glands.

BACKGROUND: Tear deficiency due to lacrimal gland (LG) dysfunction is one of the major causes of dry eye disease (DED). Therefore, LG stem cell-based therapies have been extensively reported to regenerate injured lacrimal tissue; however, the number of stem cells in the LG tissue is low, and 2D long-term cultivation reduces the differentiation capacity of stem cells. Nevertheless, 3D LG organoids could be an alternative for a DED therapy because it is capable of prolonged growth while maintaining the characteristics of the LG tissue. Here, we report the development of LG organoids and their application as cell therapeutics. METHODS: Digested cells from human LG tissue were mixed with Matrigel and cultured in five different media modified from human prostate/salivary organoid culture media. After organoid formation, the growth, specific marker expression, and histological characteristics were analyzed to authenticate the formation of LG organoids. The secretory function of LG organoids was confirmed  through calcium influx or proteomics analysis after pilocarpine treatment. To explore the curability of the developed organoids, mouse-derived LG organoids were fabricated and transplanted into the lacrimal tissue of a mouse model of DED. RESULTS: The histological features and specific marker expression of LG organoids were similar to those of normal LG tissue. In the pilocarpine-treated LG organoid, levels of internal Ca2+ ions and ß-hexosaminidase, a lysosomal protein in tear fluid, were increased. In addition, the secreted proteins from pilocarpine-treated lacrimal organoids were identified through proteomics. More than 70% of the identified proteins were proven to exosome through gene ontology analysis. These results indicate that our developed organoid was pilocarpine reactive, demonstrating the function of LG. Additionally, we developed LG organoids from patients with Sjogren's syndrome patients (SS) and confirmed that their histological features were similar to those of SS-derived LG tissue. Finally, we confirmed that the mouse LG organoids were well engrafted in the lacrimal tissue two weeks after transplantation. CONCLUSION: This study demonstrates that the established LG organoids resemble the characteristics of normal LG tissue and may be used as a therapy for patients with DED.

Fabrication of Dentin-Pulp-Like Organoids Using Dental-Pulp Stem Cells.

We developed a novel dentin-pulp-like organoid. It has both stem-cell and odontoblast characteristics using a mesenchymal cell lineage of human dental-pulp stem cells (hDPSCs). The mixture of hDPSCs and Matrigel was transferred into the maintenance medium (MM) and divided into four different groups according to how long they were maintained in the odontogenic differentiation medium (ODM). All organoids were harvested at 21 days and analyzed to find the optimal differentiation condition. To assess the re-fabrication of dentin-pulp-like organoid, after dissociation of the organoids, it was successfully regenerated. Additionally, its biological activity was confirmed by analyzing changes of relevant gene expression and performing a histology analysis after adding Biodentine® into the ODM. The organoid was cultured for 11 days in the ODM (ODM 11) had the most features of both stem cells and differentiated cells (odontoblasts) as confirmed by relevant gene expression and histology analyses. Micro-computed tomography and an electron microscope also showed mineralization and odontoblastic differentiation. Finally, ODM 11 demonstrated a biologically active response to Biodentine® treatment. In conclusion, for the first time, we report the fabrication of a dentin-pulp-like organoid using mesenchymal stem cells. This organoid has potential as a future therapeutic strategy for tooth regeneration.

Direct In Situ Growth of Centimeter-Scale Multi-Heterojunction MoS2/WS2/WSe2 Thin-Film Catalyst for Photo-Electrochemical Hydrogen Evolution.

To date, the in situ fabrication of the large-scale van der Waals multi-heterojunction transition metal dichalcogenides (multi-TMDs) is significantly challenging using conventional deposition methods. In this study, vertically stacked centimeter-scale multi-TMD (MoS2/WS2/WSe2 and MoS2/WSe2) thin films are successfully fabricated via sequential pulsed laser deposition (PLD), which is an in situ growth process. The fabricated MoS2/WS2/WSe2 thin film on p-type silicon (p-Si) substrate is designed to form multistaggered gaps (type-II band structure) with p-Si, and this film exhibits excellent spatial and thickness uniformity, which is verified by Raman spectroscopy. Among various application fields, MoS2/WS2/WSe2 is applied to the thin-film catalyst of a p-Si photocathode, to effectively transfer the photogenerated electrons from p-Si to the electrolyte in the photo-electrochemical (PEC) hydrogen evolution. From a comparison between the PEC performances of the homostructure TMDs (homo-TMDs)/p-Si and multi-TMDs/p-Si, it is demonstrated that the multistaggered gap of multi-TMDs/p-Si improves the PEC performance significantly more than the homo-TMDs/p-Si and bare p-Si by effective charge transfer. The new in situ growth process for the fabrication of multi-TMD thin films offers a novel and innovative method for the application of multi-TMD thin films to various fields.

Development of Collagen-Based 3D Matrix for Gastrointestinal Tract-Derived Organoid Culture.

Organoid is a cell organization grown in a three-dimensional (3D) culture system which represents all characteristics of its origin. However, this organ-like structure requires supporting matrix to maintain its characteristics and functions. Matrigel, derived from mouse sarcoma, has often been used as the supporting matrix for organoids, but the result may not be desirable for clinical applications because of the unidentified components from the mouse sarcoma. On the other hand, natural characteristics of collagen emphasize toxic-free friendly niche to both organoid and normal tissue. Hence, this study attempts to develop a new, collagen-based matrix that may substitute Matrigel in organoid culture. Collagen-based matrix was made, using type 1 collagen, Ham's F12 nutrient mixture, and bicarbonate. Then, characteristics of mouse colon organoids were analyzed by morphology and quantitative messenger RNA (mRNA) expression, revealing that the mouse colon organoids grown in the collagen-based matrix and in Matrigel had quite similar morphology, specific markers, and proliferative rates. Mouse small intestine-derived organoids, stomach-derived organoids, and human colon-derived organoids were also cultured, all of which were successfully grown in the collagen-based matrix and had similar properties compared to those cultured in Matrigel. Furthermore, possibility of organoid transplantation was observed. When mouse colon organoids were transplanted with collagen matrix into the EDTA-colitis mouse model, colon organoids were successfully engrafted in damaged tissue. For that reason, the use of collagen-based matrix in organoid culture will render organoid cultivation less expensive and clinically applicable.

In vivo evaluation of scaffolds compatible for colonoid engraftments onto injured mouse colon epithelium.

Colon organoids (colonoids) are known to be similar to colon tissue in structure and function, which makes them useful in the treatment of intestinal de-epithelialized disease. Matrigel, which is used as a transplantation scaffold for colonoids, cannot be used in clinical applications because of its undefined composition and tumorigenicity. This study identifies clinically available scaffolds that are effective for colonoid transplantation in damaged intestinal mucosa. The colon crypt was isolated and cultured from C57BL/6-Tg[CAG enhanced green fluorescent protein (EGFP)131Osb/LeySopJ mice into EGFP + colonoids and subsequently transplanted into the EDTA colitis mouse model using gelatin, collagen, or fibrin glue scaffolds. To identify scaffolds suitable for colonoid engraftment in injured colon mucosa, the success rates of transplantation and secondary EGFP colonoid formation were measured, and the scaffolds' mediated toxicity in vitro and in vivo was observed in recipient mice. When colonoids were transplanted with gelatin, collagen, and fibrin glue into the EDTA colitis mouse model, all groups were found to be successfully engrafted. Fibrin glue, especially, showed significant increase in the engrafted area compared with Matrigel after 4 wk. The scaffolds used in the study did not induce colonic toxicity after transplantation into the recipients' colons and were thus deemed safe when locally administrated. This study suggests new methods for and provides evidence of the safety and utility of the clinical application of colonoid-based therapeutics. Furthermore, the methods introduced in this study will be helpful in developing cell treatment using the esophagus or a stomach organoid for various digestive-system diseases.-Jee, J., Jeong, S. Y., Kim, H. K., Choi, S. Y., Jeong, S., Lee, J., Ko, J. S., Kim, M. S., Kwon, M.-S., Yoo, J. In vivo evaluation of scaffolds compatible for colonoid engraftments onto injured mouse colon epithelium.

Leucine-rich repeat-containing G-protein coupled receptor 5 enriched organoids under chemically-defined growth conditions.

An organoid is a complex, multi-cell three-dimensional (3D) structure that contains tissue-specific cells. Epithelial stem cells, which are marked by leucine-rich repeat-containing G-protein coupled receptor 5 (Lgr5), have the potential for self-renewal and expansion as organoids. However, in the case of intestinal organoids from Lgr5-EGFP-IRES-CreERT2 transgenic mice, in vitro expansion of the Lgr5 expression is limited in a culture condition supplemented with essential proteins, such as epidermal growth factor (E), noggin (N), and R-spondin 1 (R). In this study, we hypothesized that self-renewal of Lgr5+ stem cells in a 3D culture system can be stimulated by defined compounds (CHIR99021, Valproic acid, Y-27632, and A83-01). Our results demonstrated that dissociated single cells from organoids were organized into a 3D structure in the four compounds containing the ENR culture medium in a 3D and two-dimensional (2D) culture system. Moreover, the Lgr5 expression level of organoids from the ENR- and compound-containing media increased. Furthermore, the conversion of cultured Lgr5+ stem cells from 2D to 3D was confirmed. Therefore, defined compounds promote the expansion of Lgr5+ stem cells in organoids.

Efficient Light Absorption by GaN Truncated Nanocones for High Performance Water Splitting Applications.

Despite the importance of gallium nitride (GaN) nanostructures for photocatalytic activity, relatively little attention has been paid to their geometrical optimization on the basis of wave optics. In this study, we present GaN truncated nanocones to provide a strategy for improving solar water splitting efficiencies, compared to the efficiency provided by the conventional geometries (i.e., flat surface, cylindrical, and cone shapes). Computational results with a finite difference time domain (FDTD) method and a rigorous coupled-wave analysis (RCWA) reveal important aspects of truncated nanocones, which effectively concentrate light in the center of the nanostructures. The introduction of nanostructures is highly recommended to address the strong light reflection of photocatalytic materials and carrier lifetime issues. To fabricate the truncated nanocones at low cost and with large-area, a dry etching method was employed with thermally dewetted metal nanoparticles, which enables controllability of desired features on a wafer scale. Experimental results exhibit that the photocurrent density of truncated nanocones is improved about three times higher compared to that of planar GaN.

Enhanced Photocatalytic Performance Depending on Morphology of Bismuth Vanadate Thin Film Synthesized by Pulsed Laser Deposition.

We have fabricated high quality bismuth vanadate (BiVO4) polycrystalline thin films as photoanodes by pulsed laser deposition (PLD) without a postannealing process. The structure of the grown films is the photocatalytically active phase of scheelite-monoclinic BiVO4 which was obtained by X-ray diffraction (XRD) analysis. The change of surface morphology for the BIVO4 thin films depending on growth temperature during synthesis has been observed by scanning electron microscopy (SEM), and its influence on water splitting performance was investigated. The current density of the BiVO4 film grown on a glass substrate covered with fluorine-doped tin oxide (FTO) at 230 °C was as high as 3.0 mA/cm2 at 1.23 V versus the potential of the reversible hydrogen electrode (VRHE) under AM 1.5G illumination, which is the highest value so far in previously reported BiVO4 films grown by physical vapor deposition (PVD) methods. We expect that doping of transition metal or decoration of oxygen evolution catalyst (OEC) in our BiVO4 film might further enhance the performance.

Large enhancement of the photovoltaic effect in ferroelectric complex oxides through bandgap reduction.

Tuning the bandgap in ferroelectric complex oxides is a possible route for improving the photovoltaic activity of materials. Here, we report the realization of this effect in epitaxial thin films of the ferroelectric complex oxide Bi3.25La0.75Ti3O12 (BLT) suitably doped by Fe and Co. Our study shows that Co (BLCT) doping and combined Fe, Co (BLFCT) doping lead to a reduction of the bandgap by more than 1 eV compared to undoped BLT, accompanied by a surprisingly more efficient visible light absorption. Both BLCT and BLFCT films can absorb visible light with a wavelength of up to 500 nm while still exhibiting ferroelectricity, whereas undoped BLT only absorbs UV light with a wavelength of less than 350 nm. Correlated with its bandgap reduction, the BLFCT film shows a photocurrent density enhanced by 25 times compared to that of BLT films. Density functional theory calculations indicate that the bandgap contraction is caused by the formation of new energy states below the conduction bands due to intermixed transition metal dopants (Fe, Co) in BLT. This mechanism of tuning the bandgap by simple doping can be applied to other wide-bandgap complex oxides, thereby enabling their use in solar energy conversion or optoelectronic applications.