Scaffold-Guided Crystallization of Oriented α-FAPbI3 Nanowire Arrays for Solar Cells.

Perovskite nanowire arrays with large surface areas for efficient charge transfer and continuous highly crystalline domains for efficient charge transport exhibit ideal morphologies for solar-cell active layers. Here, we introduce a room temperature two-step method to grow dense, vertical nanowire arrays of formamidinium lead iodide (FAPbI3). PbI2 nanocrystals embedded in the cylindrical nanopores of anodized titanium dioxide scaffolds were converted to FAPbI3 by immersion in a FAI solution for a period of 0.5-30 min. During immersion, FAPbI3 crystals grew vertically from the scaffold surface as nanowires with diameters and densities determined by the underlying scaffold. The presence of butylammonium cations during nanowire growth stabilized the active α polymorph of FAPbI3, precluding the need for a thermal annealing step. Solar cells comprising α-FAPbI3 nanowire arrays exhibited maximum solar conversion efficiencies of >14%. Short-circuit current densities of 22-23 mA cm-2 were achieved, on par with those recorded for the best-performing FAPbI3 solar cells reported to date. Such large photocurrents are attributed to the single-crystalline, low-defect nature of the nanowires and increased interfacial area for photogenerated charge transfer compared with thin films.

Near-UV light emitting diode with on-chip photocatalysts for purification applications.

A new design for light-emitting diodes (LEDs) with on-chip photocatalysts is presented for purification applications. An array of disk-shaped TiO2, with a diameter of several hundred nanometers, combined with SiO2 pedestals was fabricated directly on the surface of an InGaN-based near-ultraviolet (UV) LED using a dry etching process. The high refractive-index contrast at the boundary and the circular shape can effectively confine the near-UV light generated from the LED through multiple internal reflections inside the TiO2 nanodisks. Such a feature results in the enhancement of light absorption by the photocatalytic TiO2. The degradation of the organic dye malachite green was monitored as a model photocatalytic reaction. The proposed structure of LEDs with TiO2/SiO2 nanodisk/pedestal array exhibited a photocatalytic activity that was three times higher than the activity of LEDs with a TiO2 planar layer. The integration of photocatalytic materials with near-UV LEDs in a single system is promising for various purification applications, such as sterilization and disinfection.

Peripheral nerve injury and sensitization underlie pain associated with oral cancer perineural invasion.

Cancer invading into nerves, termed perineural invasion (PNI), is associated with pain. Here, we show that oral cancer patients with PNI report greater spontaneous pain and mechanical allodynia compared with patients without PNI, suggesting that unique mechanisms drive PNI-induced pain. We studied the impact of PNI on peripheral nerve physiology and anatomy using a murine sciatic nerve PNI model. Mice with PNI exhibited spontaneous nociception and mechanical allodynia. Perineural invasion induced afterdischarge in A high-threshold mechanoreceptors (HTMRs), mechanical sensitization (ie, decreased mechanical thresholds) in both A and C HTMRs, and mechanical desensitization in low-threshold mechanoreceptors. Perineural invasion resulted in nerve damage, including axon loss, myelin damage, and axon degeneration. Electrophysiological evidence of nerve injury included decreased conduction velocity, and increased percentage of both mechanically insensitive and electrically unexcitable neurons. We conclude that PNI-induced pain is driven by nerve injury and peripheral sensitization in HTMRs.

Photocatalytic Degradation of Rhodamine B Dye by TiO2 and Gold Nanoparticles Supported on a Floating Porous Polydimethylsiloxane Sponge under Ultraviolet and Visible Light Irradiation.

A combination of plasmonic nanoparticles (NPs) with semiconductor photocatalysts, called plasmonic photocatalysts, can be a good candidate for highly efficient photocatalysts using broadband solar light because it can greatly enhance overall photocatalytic efficiency by extending the working wavelength range of light from ultraviolet (UV) to visible. In particular, fixation of plasmonic photocatalysts on a floating porous substrate can have additional advantages for their recycling after water treatment. Here, we report on a floating porous plasmonic photocatalyst based on a polydimethylsiloxane (PDMS)-TiO2-gold (Au) composite sponge, in which TiO2 and Au NPs are simultaneously immobilized on the surface of interconnected pores in the PDMS sponge. This can be easily fabricated by a simple sugar-template method with TiO2 NPs and in situ reduction of Au NPs by the PDMS without extra chemicals. Its ability to decompose the organic pollutant rhodamine B in water was tested under UV and visible light, respectively. The results showed highly enhanced photocatalytic activity under both UV and visible light compared to the PDMS-TiO2 sponge and the PDMS-Au sponge. Furthermore, its recyclability was also demonstrated for multiple cycles. The simplicity of fabrication and high photocatalytic performance of our PDMS-TiO2-Au sponge can be promising in environmental applications to treat water pollution.

Fabrication of Spherical Titania Inverse Opal Structures Using Electro-Hydrodynamic Atomization.

Spherical PS/HEMA opal structure and spherical titania inverse opal structure were fabricated by self-assembly of colloidal nanoparticles in uniform aerosol droplets generated with electro-hydrodynamic atomization method. When a solution of PS/HEMA nanoparticles with uniform size distribution was used, PS/HEMA nanoparticles self-assembled into a face-centered cubic (FCC) structure by capillary force with the evaporation of the solvent in aerosol droplet, resulting in a spherical opal structure. When PS/HEMA nanoparticles and anatase titania nanoparticles were dispersed simultaneously into the solution, titania nanoparticles with relatively smaller size were assembled at the interstitial site of PS/HEMA nanoparticles packed in the FCC structure, resulting in a spherical opal composite structure. Spherical titania inverse opal structure was fabricated after removing PS/HEMA nanoparticles from the spherical opal composite structure by calcination.

Hollow Porous Gold Nanoshells with Controlled Nanojunctions for Highly Tunable Plasmon Resonances and Intense Field Enhancements for Surface-Enhanced Raman Scattering.

Plasmonic metal nanostructures with nanogaps have attracted great interest owing to their controllable optical properties and intense electromagnetic fields that can be useful for a variety of applications, but precise and reliable control of nanogaps in three-dimensional nanostructures remains a great challenge. Here, we report the control of nanojunctions of hollow porous gold nanoshell (HPAuNS) structures by a facile oxygen plasma-etching process and the influence of changes in nanocrevices of the interparticle junction on the optical and sensing characteristics of HPAuNSs. We demonstrate a high tunability of the localized surface plasmon resonance (LSPR) peaks and surface-enhanced Raman scattering (SERS) detection of rhodamine 6G (R6G) using HPAuNS structures with different nanojunctions by varying the degree of gold sintering. As the neck region of the nanojunction is further sintered, the main LSPR peak shifts from 785 to 1350 nm with broadening because the charge transfer plasmon mode becomes more dominant than the dipolar plasmon mode, resulting from the increase of conductance at the interparticle junctions. In addition, it is demonstrated that an increase in the sharpness of the nanojunction neck can enhance the SERS enhancement factor of the HPAuNS by up to 4.8-fold. This enhancement can be ascribed to the more intense local electromagnetic fields at the sharper nanocrevices of interparticle junctions. The delicate change of nanojunction structures in HPAuNSs can significantly affect their optical spectrum and electromagnetic field intensity, which are critical for their practical use in a SERS-based analytical sensor as well as multiple-wavelength compatible applications.

Crystal-Structure-Dependent Piezotronic and Piezo-Phototronic Effects of ZnO/ZnS Core/Shell Nanowires for Enhanced Electrical Transport and Photosensing Performance.

We report the crystal-structure-dependent piezotronic and piezo-phototronic effects of ZnO/ZnS core/shell nanowires (CS NWs) having different shell layer crystalline structures. The wurtzite (WZ) ZnO/WZ ZnS CS NWs showed higher electrical transport and photosensing properties under external strain than the WZ ZnO/zinc blende (ZB) ZnS CS NWs. The WZ ZnO/WZ ZnS CS NWs under a compressive strain of -0.24% showed 4.4 and 8.67 times larger increase in the output current (1.93 × 10-4 A) and photoresponsivity (8.76 × 10-1 A/W) than those under no strain. However, the WZ ZnO/ZB ZnS CS NWs under the same strain condition showed 3.2 and 2.16 times larger increase in the output current (1.13 × 10-4 A) and photoresponsivity (2.16 × 10-1 A/W) than those under no strain. This improvement is ascribed to strain-induced piezopolarization charges at both the WZ ZnO NWs and the grains of the WZ ZnS shell layer in WZ ZnO/WZ ZnS CS NWs, whereas piezopolarization charges are induced only in the ZnO core region of the WZ ZnO/ZB ZnS CS NWs. These charges can change the type-II band alignment in the ZnO and ZnS interfacial region as well as the Schottky barrier height at the junction between the semiconductor and the metal, thus facilitating electrical transport and reducing the recombination probability of charge carriers under UV irradiation.

Original Research: Extract of Bambusae Caulis in Taeniam inhibits cigarette smoke-induced pulmonary and intestinal inflammation.

The pulmonary and intestinal systems have several characteristics in common. It is believed that these similarities somehow function to cause pulmonary-intestinal crosstalk during inflammation. Many studies have shown that pulmonary disease occurs in association with inflammatory bowel disease more often than is commonly recognized. Bambusae Caulis in Taeniam, a medicinal herb originated from the inner bark of Phyllostachys nigra var. henosis (Milford) Rendle (Poaceae), has been used to cure fever, diarrhea, and chest inflammation in Korea as well as in China. Cigarette smoke is a well-known risk factor for several inflammatory disorders. In this study, we induced pulmonary and bowel inflammation in mice using cigarette smoke and investigated whether Bambusae Caulis in Taeniam extract modulates the inflammatory response in both the lung and the bowel. C57BL/6 mice were exposed to cigarette smoke for 90 min per day for three weeks, and Bambusae Caulis in Taeniam extract was administered via oral injection 2 h before cigarette smoke exposure. The bronchoalveolar lavage cells were counted and hematoxylin and eosin staining were performed. Levels of inflammatory mediators in lung and large intestine were determined by enzyme-linked immunosorbent assay, real-time polymerase chain reaction, and Western blotting. Our results showed that Bambusae Caulis in Taeniam attenuated cigarette smoke-induced inflammatory response in both the lung and the bowel of mice by inhibiting the production of pro-inflammatory cytokines, chemokines, and protease as well as NF-κB signaling factor. Therefore, we suggest that Bambusae Caulis in Taeniam extract might be a candidate therapeutic agent for inhibiting pulmonary and intestinal inflammation.

Polyphenol-enriched Vaccinium uliginosum L. fractions reduce retinal damage induced by blue light in A2E-laden ARPE19 cell cultures and mice.

Polyphenols exert beneficial effects on vision. We hypothesized that polyphenol components of Vaccinium uliginosum L. (V.U.) extract protect retinal pigment epithelial (RPE) cells against blue light-induced damage. Our aim was to test extracts containing polyphenol components to ascertain effects to reduce damage against blue light in RPEs. We measured the activity in fractions eluted from water, ethanol, and HP20 resin (FH), and found that the FH fraction had the highest beneficial activity. We isolated the individual active compounds from the FH fraction using chromatographic techniques, and found that FH contained flavonoids, anthocyanins, phenyl propanoids, and iridoids. Cell cultures of A2E-laden ARPE-19 exposed to blue light after treatment with V.U. extract fractions and their individual constituents indicated improvement. V uliginosum L extract fractions and constituent compounds significantly reduced A2E photo-oxidation-induced RPE cell death and inhibited intracellular A2E accumulation. Furthermore, Balb/c male mice were exposed to blue light at 10000 lux for 1 h/d for 2 weeks to induce retinal damage. One week after the final blue light exposure, retinal damage evaluated revealed that the outer nuclear layer thickness and nuclei count were improved. Histologic examination of murine photoreceptor cells demonstrated that FH, rich in polyphenols, inhibited the loss of outer nuclear layer thickness and nuclei. Our findings suggest that V.U. extract and eluted fractions are a potential source of bioactive compounds that potentially serve a therapeutic approach for age-related macular degeneration.

Light-Emitting Diodes with Hierarchical and Multifunctional Surface Structures for High Light Extraction and an Antifouling Effect.

Bioinspired hierarchical structures on the surface of vertical light-emitting diodes (VLEDs) are demonstrated by combining a self-assembled dip-coating process and nanopatterning transfer method using thermal release tape. This versatile surface structure can efficiently reduce the total internal reflection and add functions, such as superhydrophobicity and high oleophobicity, to achieve an antifouling effect for VLEDs.

High-performance photoconductivity and electrical transport of ZnO/ZnS core/shell nanowires for multifunctional nanodevice applications.

We report the electrical and optical properties of ZnO/ZnS core/shell nanowire (NW) devices. The spatial separation of charge carriers due to their type II band structure together with passivation effect on ZnO/ZnS core/shell NWs not only enhanced their charge carrier transport characteristics by confining the electrons and reducing surface states in the ZnO channel but also increased the photocurrent under ultraviolet (UV) illumination by reducing the recombination probability of the photogenerated charge carriers. Here the efficacy of the type-II band structure and the passivation effect are demonstrated by showing the enhanced subthreshold swing (150 mV/decade) and mobility (17.2 cm2/(Vs)) of the electrical properties, as well as the high responsivity (4.4×10(6) A/W) in the optical properties of the ZnO/ZnS core/shell NWs, compared with the subthreshold swing (464 mV/decade), mobility (8.9 cm2/(Vs)) and responsivity (2.5×10(6) A/W) of ZnO NWs.

Investigation of threshold voltage instability induced by gate bias stress in ZnO nanowire field effect transistors.

We investigated the threshold voltage instability induced by gate bias (V(G)) stress in ZnO nanowire (NW) field effect transistors (FETs). By increasing the V(G) sweep ranges and repeatedly measuring the electrical characteristics of the ZnO NW FETs, the V(G) stress was produced in the dielectric layer underneath the ZnO NW. Consequently, the electrical conductance of the ZnO NW FETs decreased, and the threshold voltage shifted towards the positive V(G) direction. This threshold voltage instability induced by the V(G) stress is associated with the trapping of charges in the interface trap sites located in the ZnO NW-dielectric interface. Our study will be helpful for understanding the stability of ZnO NW FETs during repetitive operations.