Effects on gait kinematics, pedobarography, functional and subjective results after isolated chopart injury.

BACKGROUND: This study analysed changes in gait and pedobarography and subjective and functional outcomes after isolated Chopart joint injury. METHODS: The results of 14 patients were reviewed. Kinematic 3D gait analysis, comparative bilateral electromyography (EMG) and pedobarography were performed. RESULTS: On the injured side, the 3D gait analysis showed a significantly increased internal rotation and decreased external rotation of the hip and significantly decreased adduction and decreased range of motion (ROM) for the ankle. On the healthy side, the pedobarography revealed a significantly increased mean force in the forefoot, an increased peak maximum force and an increased maximum pressure in the metatarsal. When standing, significantly more weight was placed on the healthy side. The EMG measurements showed no significant differences between the healthy and injured legs. CONCLUSIONS: After isolated Chopart injuries, significant changes in gait and pedobarography can be seen over the long term.

Comment on 'Limitations in evaluating COVID-19 protective face masks using open circuit spirometry systems: respiratory measurement mask introduces bias in breathing pressure and perceived respiratory effort'.

We comment on the paper by Seibt and coworkers (Seibtet al2023) which investigates whether wearing an additional respiratory measurement mask during open-circuit spirometry assessments (respirometry mask) shows any effect on breathing pressure and perceived respiratory effort when wearing protective face masks commonly worn during the COVID-19 pandemic.

Influence of face masks on the subjective impairment at different physical workloads.

To quantify the subjective and cognitive impairment caused by wearing face masks at work, 20 men and 20 women (median age 47 years, range 19-65) were tested under different ergometer workloads while wearing surgical mask, community mask, FFP2 respirator or no mask in a randomized and partially double-blinded design. Masks were worn also at the workplace for four hours. Subjective impairment was recorded by questionnaires. Cognitive performance was tested before and after the workplace examination. Subjective feeling of heat, humidity, and difficult breathing increased with rising physical exertion and wearing time for all three mask types, most notably for FFP2. Even when blinded, participants with FFP2 reported difficult breathing already at rest. During physical exertion, individuals with low tolerance to discomfort reported significantly stronger impairment (OR 1.14, 95% CI 1.02-1.27). Regarding light work, older subjects (OR 0.95, 95% CI 0.92-0.98) and women (OR 0.84, 95% CI 0.72-0.99) showed significantly lower and atopic subjects stronger impairment (OR 1.16, 95% CI 1.06-1.27). No significant influence of mask wearing was detected on cognitive performance. Wearing a mask had no effect on cognitive performance, but led to discomfort which increased with physical exertion and wearing time. Individuals who tolerate discomfort poorly felt more impaired by wearing a mask during physical exertion.

The impact of knee arthrodesis on gait kinematics, muscle activity and patient-reported outcome.

BACKGROUND: The aim of this retrospective study was to analyze gait kinematicsandoutcome parameters after knee arthrodesis. METHODS: Fifteenpatients with a mean follow-up of 5.9 (range0.8-36) years after unilateral knee arthrodesis were included. A 3D gait analysis was performed and compared to a healthy control group of14patients. Comparative electromyography was performed bilaterally at the rectus femoris, vastuslateralis/medialisand tibialis anterior muscles. The assessment further included standardized outcome scores- Lower Extremity Functional Scale (LEFS) andShort Form Health Survey (SF-36). RESULTS: The 3D analysis showed a significantly shortened stance phase (p = 0.000), an extended swing phase (p = 0.000), and an increased time per step (p = 0.009) for the operated side compared with thenonoperatedside. There were statistically significant differences in the extent of movement of the hips, knees and ankles among the operated andnonoperatedsides and the control group. For the mean EMG measurement, no significant difference was found between the healthy control group and the patients with arthrodesis.The average LEFSscorewas 27.5 ± 10.6out of a maximum of 80 points,and the mean physical total scale and mean emotional total scale scores for the SF-36 were 27.9 ± 8.5and 52.9 ± 9.9, respectively. CONCLUSIONS: Arthrodesis of the knee joint causes significant kinematic changes in gait pattern,and patients achieve poor results in subjective and functional outcomes(SF- 36, LEFS).Arthrodesis ensures that the extremities are preserved and can enable walking, but it must be viewed as a severe handicap for the patient.

Effects of wearing different face masks on cardiopulmonary performance at rest and exercise in a partially double-blinded randomized cross-over study.

The use of face masks became mandatory during SARS-CoV-2 pandemic. Wearing masks may lead to complaints about laboured breathing and stress. The influence of different masks on cardiopulmonary performance was investigated in a partially double-blinded randomized cross-over design. Forty subjects (19-65 years) underwent body plethysmography, ergometry, cardiopulmonary exercise test and a 4-h wearing period without a mask, with a surgical mask (SM), a community mask (CM), and an FFP2 respirator (FFP2). Cardiopulmonary, physical, capnometric, and blood gas related parameters were recorded. Breathing resistance and work of breathing were significantly increased while wearing a mask. During exercise the increase in minute ventilation tended to be lower and breathing time was significantly longer with mask than without mask. Wearing a mask caused significant minimal decreases in blood oxygen pressure, oxygen saturation, an initial increase in blood and inspiratory carbon dioxide pressure, and a higher perceived physical exertion and temperature and humidity behind the mask under very heavy exercise. All effects were stronger when wearing an FFP2. Wearing face masks at rest and under exercise, changed breathing patterns in the sense of physiological compensation without representing a health risk. Wearing a mask for 4-h during light work had no effect on blood gases.

Mortality rates of severe COVID-19-related respiratory failure with and without extracorporeal membrane oxygenation in the Middle Ruhr Region of Germany.

The use of extracorporeal membrane oxygenation (ECMO) is discussed to improve patients' outcome in severe COVID-19 with respiratory failure, but data on ECMO remains controversial. The aim of the study was to determine the characteristics of patients under invasive mechanical ventilation (IMV) with or without veno-venous ECMO support and to evaluate outcome parameters. Ventilated patients with COVID-19 with and without additional ECMO support were analyzed in a retrospective multicenter study regarding clinical characteristics, respiratory and laboratory parameters in day-to-day follow-up. Recruitment of patients was conducted during the first three COVID-19 waves at four German university hospitals of the Ruhr University Bochum, located in the Middle Ruhr Region. From March 1, 2020 to August 31, 2021, the charts of 149 patients who were ventilated for COVID-19 infection, were included (63.8% male, median age 67 years). Fifty patients (33.6%) received additional ECMO support. On average, ECMO therapy was initiated 15.6 ± 9.4 days after symptom onset, 10.6 ± 7.1 days after hospital admission, and 4.8 ± 6.4 days after the start of IMV. Male sex and higher SOFA and RESP scores were observed significantly more often in the high-volume ECMO center. Pre-medication with antidepressants was more often detected in survivors (22.0% vs. 6.5%; p = 0.006). ECMO patients were 14 years younger and presented a lower rate of concomitant cardiovascular diseases (18.0% vs. 47.5%; p = 0.0004). Additionally, cytokine-adsorption (46.0% vs. 13.1%; p < 0.0001) and renal replacement therapy (76.0% vs. 43.4%; p = 0.0001) were carried out more frequently; in ECMO patients thrombocytes were transfused 12-fold more often related to more than fourfold higher bleeding complications. Undulating C-reactive protein (CRP) and massive increase in bilirubin levels (at terminal stage) could be observed in deceased ECMO patients. In-hospital mortality was high (Overall: 72.5%, ECMO: 80.0%, ns). Regardless of ECMO therapy half of the study population deceased within 30 days after hospital admission. Despite being younger and with less comorbidities ECMO therapy did not improve survival in severely ill COVID-19 patients. Undulating CRP levels, a massive increase of bilirubin level and a high use of cytokine-adsorption were associated with worse outcomes. In conclusion, ECMO support might be helpful in selected severe cases of COVID-19.

Influence of articular step-off on contact mechanics in fractures of the posterolateral-central tibial plateau - a biomechanical study.

BACKGROUND: The posterior quadrants of the tibial plateau are frequently involved in OTA type C tibial plateau fractures. The biomechanical influence of a residual articular step-off of the posterolateral-central (PLC) segment, which is difficult to visualize intraoperatively, remains unclear. Therefore, aim of this study was to investigate the contact area and stress of the tibial plateau in cases of different articular step-offs of the PLC segment. METHODS: Seven human cadaveric knees were used to simulate articular impressions of the PLC segment with step-offs of 1 mm, 3 mm, and 5 mm. The knees were axially loaded up to 150 N during a total of 25 dynamic cycles of knee flexion up to 90°. Pressure mapping sensors were inserted into the medial and lateral joint compartments beneath the menisci to measure articular contact area and stress. RESULTS: Between 60° and 90° of knee flexion, increasing PLC segment impressions of the tibial plateau led to increasing contact stress and a significantly reduced contact area. The largest decrease in the contact area was 30 %, with an articular step-off of 5 mm (0.003). An increase in contact stress, especially from a 3-mm step-off, was measured, with a doubling of the mean contact stress at 3-mm and 5-mm step-offs and 90° knee flexion (p = 0.06/0.05). CONCLUSION: From a biomechanical point of view, posterior impressions of the PLC segment greater than a 1-mm step-off should be addressed as anatomically as possible, especially in active patients with the need for higher knee flexion angles.

Locking the Taylor Spatial Frame - The effect of three additional longitudinal rods on osteotomy site movements.

BACKGROUND: In clinical practice, even when the fixator is locked, a noticeable laxity of the construct can be observed. This study was designed to measure the stiffness of the fixator and to analyze the movements of the osteotomy site. Furthermore, the effect of three additional longitudinal rods on the locking of the construct was analyzed. METHODS: Five synthetic tibia/fixator models (Model A) were tested under rotational torque (40 Nm) and axial compression (700 N). Three additional rigid rods were subsequently mounted, and the tests were repeated (Model B). The movements of the fixator as well as the osteotomy site were registered by a digital optical measurement system. Load- deformation curves, and so stiffness of the models, were calculated and compared. FINDINGS: Under rotational and axial loadings, Model A was found to be less rigid than Model B (p = 0.034; p = 0.194). Notably, Model A showed a region of laxity around neutral rotational (ΔF = 5 Nm) and axial (ΔF = 16.64 N) loading before a linear deformation trend was measured. Concomitantly, greater osteotomy site movement was measured for Model A than for Model B under full loading (p = 0.05) and within the region of increased laxity (p = 0.042). INTERPRETATION: The fixator showed an element of laxity around neutral axial and rotational loading, which transferred to the bone and led to a notable amount of osteotomy gap movement. Mounting three additional rods increased the stiffness of the construct and therefore reduced the movement of the osteotomy site.

No inflammatory effects after acute inhalation of barium sulfate particles in human volunteers.

BACKGROUND: Most threshold limit values are based on animal experiments. Often, the question remains whether these data reflect the situation in humans. As part of a series of investigations in our exposure lab, this study investigates whether the results on the inflammatory effects of particles that have been demonstrated in animal models can be confirmed in acute inhalation studies in humans. Such studies have not been conducted so far for barium sulfate particles (BaSO4), a substance with very low solubility and without known substance-specific toxicity. Previous inhalation studies with zinc oxide (ZnO), which has a substance-specific toxicity, have shown local and systemic inflammatory respones. The design of these human ZnO inhalation studies was adopted for BaSO4 to compare the effects of particles with known inflammatory activity and supposedly inert particles. For further comparison, in vitro investigations on inflammatory processes were carried out. METHODS: Sixteen healthy volunteers were exposed to filtered air and BaSO4 particles (4.0 mg/m3) for two hours including one hour of ergometric cycling at moderate workload. Effect parameters were clinical signs, body temperature, and inflammatory markers in blood and induced sputum. In addition, particle-induced in vitro-chemotaxis of BaSO4 was investigated with regard to mode of action and differences between in vivo and in vitro effects. RESULTS: No local or systemic clinical signs were observed after acute BaSO4 inhalation and, in contrast to our previous human exposure studies with ZnO, no elevated values of biomarkers of inflammation were measured after the challenge. The in vitro chemotaxis induced by BaSO4 particles was minimal and 15-fold lower compared to ZnO. CONCLUSION: The results of this study indicate that BaSO4 as a representative of granular biopersistent particles without specific toxicity does not induce inflammatory effects in humans after acute inhalation. Moreover, the in vitro data fit in with these in vivo results. Despite the careful and complex investigations, limitations must be admitted because the number of local effect parameters were limited and chronic toxicity could not be studied.

Maggot Extract Interrupts Bacterial Biofilm Formation and Maturation in Combination with Antibiotics by Reducing the Expression of Virulence Genes.

Biofilms are aggregates of bacteria encased in an extracellular polymer matrix that acts as a diffusion barrier protecting the microbial community. Bacterial communication occurs by small signaling molecules called quorum sensing (QS) factors, which are involved in the activation of virulence genes and formation of biofilms. Larvae of the green bottle blowfly Lucilia sericata remove necrotic tissue by mechanical action (debridement) and proteolytic digestion. We produced a freeze-dried storable powder from larval extract and investigated its therapeutic effect on biofilms. Larval extract in concentrations of 6 and 12 mg/mL in combination with 0.5% antibiotics (≙50 U/mL penicillin and 50 µg/mL streptomycin) diminished free-floating (planktonic) Pseudomonas aeruginosa maintenance, while it showed no effect on Staphylococcus aureus and was not toxic to dermal cells. We established an ex vivo human dermal wound model. Larval extract in concentrations of 24 and 75 mg/mL in the presence of antibiotics (0.5%) significantly destroyed the biofilm stability of both P. aeruginosa and S. aureus biofilms. Furthermore, SEM analyses revealed crack and gap formations on P. aeruginosa. biofilm surface and decreased expression of P. aeruginosa biofilm maturation and virulence genes (lasR, rhlR and rhlA) was observed after treatment by larval extract in combination with antibiotics.

Physiological responses, self-reported health effects, and cognitive performance during exposure to carbon dioxide at 20 000 ppm.

In this study, 24 subjects (20-58 years) were exposed to carbon dioxide (CO2 ) at 770 ppm and 20 000 ppm in an exposure laboratory for 4-h, including 2 × 15 min of cycling to investigate the effects on acid-base balance, physiological responses, cognitive performance and acute health. Capillary blood analysis, heart rate, respiratory rate, divided attention, flexibility, and sustained attention from the Test Battery for Attentional Performance (TAP), critical flicker fusion frequency (CFF), and self-reported symptoms were measured before, during, and after the 4-h exposure. Blood pH decreased and partial pressure of carbon dioxide (pCO2 ) increased significantly when exposed to 20 000 ppm CO2 compared to 770 ppm. However, the values remained within the normal range. In addition, respiratory rate increased slightly but significantly at 20 000 ppm CO2 . No significant changes in heart rate, CFF, task performance or acute health were found. In sum, the findings suggest that the observed changes in acid-base balance and ventilation can be classified as physiological adaptation responses. Impairment of cognitive performance is not expected from exposure to 20 000 ppm CO2 , neither as direct effect on central nervous system function nor as a distraction related to perception of health effects.

Hierarchical Ceramic Coating Reduces Adherence of Cells, Blood, Bacteria, and Tissue on Titanium Microsurgical Instruments.

BACKGROUND: Progress in the field of microsurgery allows more detailed reconstructions of the smallest tissue structures. The applied instruments are left with biological residues after coming into contact with body fluids or tissue, leading to compromised surgical precision. Designing of residue-free innovative instruments would reduce the necessity of subsidiary practices and would improve the surgical precision. METHODS: We designed a ceramic coating (Lotus ceramic coating system 26-LCC-26) that exhibits self-cleaning surface properties on coated titanium specimens. A titanium surface was modified by blasting technology and electropolishing, followed by applying a high-performance ceramic and sol-gel finish layer. The physical surface characterization was performed by scanning electron microscopy and measuring the contact angle. The cell-repellent properties and cytotoxicity were investigated using live-dead staining, BrdU, and lactate dehydrogenase assay. Furthermore, bacterial and fluid-adhesion tests were performed. Finally, blood compatibility was analyzed according to DIN ISO 10993. RESULTS: The composite system LCC-26 increased the hydrophobic character of the titanium surface (the water contact angle of 74.9 degrees was compared with 62.7 degrees of the uncoated native titanium; p < 0.01) and led to the fluid and cell-repellent properties shown by the reduction in fibroblast adherence by ∼50.7% (p < 0.05), the reduction in Staphylococcus aureus pathogen colonization by 74.1% (p < 0.001), and the decrease in erythrocyte adherence by 62.9% (p < 0.01). Furthermore, the LCC-26 coated titanium microforceps dipped in human whole blood exhibited blood-repellent character (reduction in blood adherence by 46.1%; p < 0.05). Additionally, cyto- and hemocompatibility was guaranteed in direct and indirect tests. CONCLUSION: Titanium surface modification on surgical instruments exhibits cell, bacteria, and blood-repellent properties with a full guarantee of cyto- and hemocompatibility. Thus, innovatively coated instruments could contribute to increased precision during microsurgical interventions and optimized medical operation routines in the future.

Improved Physiological Gait in Acute and Chronic SCI Patients After Training With Wearable Cyborg Hybrid Assistive Limb.

In recent years robotic devices became part of rehabilitation offers for patients suffering from Spinal Cord Injury (SCI) and other diseases. Most scientific publications about such devices focus on functional outcome. The aim of this study was to verify whether an improvement in physiological gait can be demonstrated in addition to the functional parameters after treatment with neurological controlled HAL® Robot Suit. Fifteen subjects with acute (<12 months since injury, n = 5) or chronic (>12 months since injury, n = 10) incomplete paraplegia (AIS B, n = 0/AIS C, n = 2/AIS D, n = 8) or complete paraplegia (AIS A, n = 5) with zones of partial preservation participated. Subjects underwent a body weight supported treadmill training for five times a week over 12 weeks using HAL®. At baseline and at the end of the study a gait analysis was performed and additional functional parameters such as 10-Meter-Walk-Test, Timed-Up-and-Go-Test, 6-Minutes-Walk-Test, and WISCI II score were collected. Results were evaluated for whole group and individually for acute and chronic subgroups. All functional parameters improved. Differences were also found in physiological parameters such as phases of gait cycle and accompanied by significant improvement in all spatiotemporal and gait phase parameters. The presented study shows signs that an improvement in physiological gait can be achieved in addition to improved functional parameters in patients with SCI after completing 12-week training with HAL®. Trial Registration: DRKS, DRKS00020805. Registered 12 February 2020-Retrospectively registered, https://www.drks.de/DRKS00020805.

A novel titanium implant surface modification by plasma electrolytic oxidation (PEO) preventing tendon adhesion.

Titanium is one of the most commonly used materials for implants in trauma applications due to its low density, high corrosion resistance and biocompatibility. Nevertheless, there is still a need for improved surface modifications of Titanium, in order to change surface properties such as wettability, antibacterial properties or tissue attachment. In this study, different novel plasma electrolytic oxidation (PEO) modifications have been investigated for tendon adhesion to implants commonly used in hand surgery. Titanium samples with four different PEO modifications were prepared by varying the electrolyte composition and analyzed with regards to their surface properties. Unmodified titanium blanks and Dotize® coating served as controls. Samples were examined using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), contact angle measuring system and analyzed for their biocompatibility and hemocompatibility (according to DIN ISO 10993-5 and 10,993-4). Finally, tendon adhesion of these specific surfaces were investigated by pull-off tests. Our findings show that surface thickness of PEO modifications was about 12-20 µm and had porous morphology. One modification demonstrated hydrophilic behavior accompanied by good biocompatibility without showing cytotoxic properties. Furthermore, no hemolytic effect and no significant influence on hemocompatibility were observed. Pull-off tests revealed a significant reduction of tendon adhesion by 64.3% (35.7% residual adhesion), compared to unmodified titanium (100%). In summary, the novel PEO-based ceramic-like porous modification for titanium surfaces might be considered a good candidate for orthopedic applications supporting a more efficient recovery.

Anatomical repair and ligament bracing of Schenck III and IV knee joint dislocations leads to acceptable subjective and kinematic outcomes.

PURPOSE: The aim of this study was to analyze the outcomes of anatomical repair and ligament bracing for Schenck III and IV knee dislocation (KD). METHODS: The results of 27 patients (15 and 12 cases of Schenck III and IV KD, respectively) after a mean follow-up of 18.1 ± 12.1 months (range 6-45 months) were retrospectively reviewed. Twenty-two patients suffered high-kinetic-energy accidents, whereas five patients suffered ultralow-velocity (ULV) trauma due to obesity. The outcome measures were the Lysholm score, Hospital for Special Surgery (HSS) knee score, Knee Society Score (KSS), Knee Injury and Osteoarthritis Outcome Score (KOOS) and Short Form 36 (SF-36) score. A kinematic 3D gait analysis with five walking trials was performed to compare the patients and healthy controls. RESULTS: The mean KSS, HSS score, Lysholm score, and KOOS were 77.4 ± 14.4, 84.6 ± 11.2, 81.5 ± 10.4, and 67.3 ± 16.8, respectively. No intra- or postoperative complications occurred. The mean range of motion deficiency compared to the healthy side was 24.4 ± 18.5°. Ten patients had first-degree residual laxity of the anterior cruciate ligament; 12 and 2 patients had first- and second-degree residual laxity of the collateral ligament, respectively. Five patients underwent additional arthroscopic arthrolysis due to arthrofibrosis at an average of 6.2 ± 1.9 months (range 4-9 months) after the initial surgery. The 3D gait analysis showed no major differences in joint stability or movement between the patients and healthy controls. Only the ULV trauma patients had significantly lower outcome scores and showed larger kinematic deviations in joint movement during the gait analysis. CONCLUSION: Anatomical repair with ligament bracing is a suitable surgical procedure in the treatment of KD and provides evidence in clinical practice with the benefit of early, definitive repair and preservation of the native ligaments. Patients reach acceptable subjective and objective functional outcomes, including mainly normalized gait patterns during short-term follow-up, with only minor changes in kinematics and spatial-temporal characteristics. Obese patients who suffered ULV trauma showed significantly inferior outcomes with larger deviations in joint kinematics. LEVEL OF EVIDENCE: Level III.

Long-term follow up of extensor tendon ruptures of the knee using electromyography and three-dimensional gait analysis.

BACKGROUND: The aim of this study was to analyze the long-term outcomes of extensor tendon ruptures of the knee using exact measuring tools. METHODS: The results of patients treated for extensor tendon rupture with a minimum follow up of 10 years were reviewed. Electromyography (EMG) and three-dimensional (3D) gait analyses were performed and compared with the healthy side of each patient and with the gait patterns of 20 healthy controls. Functional outcome scores were assessed using the Lysholm score and Knee Injury and Osteoarthritis Outcome Score (KOOS). RESULTS: After a mean of 13.4 ± 3 years, 23 patients were available for follow up. The mean Lysholm score was 86.6, and the KOOS averaged 78.1. Gait analysis showed no major kinematic differences between these patients compared with healthy controls. In the squat test, the mean peak amplitude of the rectus femoris muscle was significantly smaller on the injured side than on the healthy side (140.21 ± 66.13 µV vs. 168.25 ± 91.77 µV; P = 0.01). The mean peaks of the vastus lateralis and medialis EMG signals were also lower on the injured side (P = 0.63; P = 0.08). Correspondingly, the thigh girth at 20 cm and 10 cm above the knee was significantly lower on the injured side. One patient had re-rupture after patella tendon repair. CONCLUSION: At long-term follow up the patients reached good clinical outcomes and exhibited mainly physiological gait patterns after rupture of knee extensor tendons. However, the thigh muscles showed hypotrophy and a significantly smaller EMG signal amplitude during a high-intensity task on the formerly injured side.

Health effects after inhalation of micro- and nano-sized zinc oxide particles in human volunteers.

Inhalation of ZnO particles can cause inflammation of the airways and metal fume fever. It is unclear if different sizes of the particles alter these effects. However, various studies report higher biological activity of other nano-sized particles compared to microparticles. No effects at all were observed after inhalation of micro- and nano-sized zinc oxide (ZnO) particle concentrations of 0.5 mg/m3. Studies with different particle sizes of ZnO at higher exposures are not available. Accordingly, we hypothesized that inhalation of nano-sized ZnO particles induces stronger health effects than the inhalation of the same airborne mass concentration of micro-sized ZnO particles. 16 healthy volunteers (eight men, eight women) were exposed to filtered air and ZnO particles (2.0 mg/m3) for 2 h (one session with nano- and one with micro-sized ZnO) including 1 h of cycling at moderate workload. Effect parameters were symptoms, body temperature, inflammatory markers in blood and in induced sputum. Induced sputum was obtained at baseline examination, 22 h after exposure and at the end of the final test. The effects were assessed before, immediately after, about 22 h after, as well as two and three days after each exposure. Neutrophils, monocytes and acute-phase proteins in blood increased 22 h after micro- and nano-sized ZnO exposure. Effects were generally stronger with micro-sized ZnO particles. Parameters in induced sputum showed partial increases on the next day, but the effect strengths were not clearly attributable to particle sizes. The hypothesis that nano-sized ZnO particles induce stronger health effects than micro-sized ZnO particles was not supported by our data. The stronger systemic inflammatory responses after inhalation of micro-sized ZnO particles can be explained by the higher deposition efficiency of micro-sized ZnO particles in the respiratory tract and a substance-specific mode of action, most likely caused by the formation of zinc ions.

Biomechanical comparison of screw osteosyntheses and anatomical plating for coronoid shear fractures of the ulna.

INTRODUCTION: Among the few techniques described for the treatment of coronoid fractures, osteosynthesis techniques include screw osteosynthesis from anterior to posterior (AP) or from posterior to anterior (PA) and plate osteosynthesis. The aim of this study was to test the biomechanical stability of screw osteosynthesis and plate osteosynthesis using anatomical plates in coronoid process fractures. MATERIALS AND METHODS: On a total of 25 biomechanical synthetical ulnae, a coronoid shear fracture including 70% of the coronoid height was simulated. Osteosynthesis was then performed using two 2.7 mm screws from anterior, posterior and with use of three different anatomical plates of the coronoid process. For the biomechanical testing, axial load was applied to the fragment with 1000 cycles from 5 to 250 N, load to failure and load at 100 µm displacement. Displacements were measured using a point-based three-dimensional motion analysis system. RESULTS: Osteosynthesis using the PA-screw showed significant more displacement during cyclic loading compared with all other osteosyntheses (0.99 mm), whereas AP-screw showed the smallest displacement (0.10 mm) during cyclic loading. The PA-screw technique showed a significant lower load to failure compared to all other osteosynthesis with the highest load in AP-screw osteosynthesis. The load for 100 µm displacement was the smallest in PA-screw with a significant difference to the AP-screw and one plate osteosynthesis. CONCLUSION: Osteosynthesis of large coronoid shear fractures with two small-fragment screws from anterior allows stable fixation that is not inferior to anterior plate osteosynthesis and might be an alternative in specific fracture types. Posterior screw fixation was found as the weakest fixation method. LEVEL OF EVIDENCE: Basic science study.

Clinical and Radiological Outcomes After Surgical Treatment of Lower Limb Fractures in Patients With Spinal Cord Injury.

STUDY DESIGN: Retrospective observational study. OBJECTIVES: To analyze the clinical and radiological outcomes of lower limb fractures following surgical treatment in patients with chronic spinal cord injury (SCI). METHODS: Between January 2003 and December 2015, 102 chronic SCI patients with a lower limb fracture were surgically treated at our hospital. A total of 58 patients met the inclusion criteria and were recruited for final analysis. Patients with 2-stage procedure or incomplete clinical records with lost-to-follow-up were excluded from the study. Patients were divided into 2 groups (group 1= internal fixation; group 2 = external fixation). Primary outcome measures were to identify the number of nonunions via Kaplan-Meier analysis and the time to bone consolidation. The diagnosis of a pseudarthrosis was made after more than 180 days of consolidation time. Considering the Kaplan-Meier analysis, pseudarthrosis was interpreted as treatment failure. Secondary outcome measure was to evaluate the complication rate with special focus on heterotopic ossification. RESULTS: A total of 58 chronic SCI patients with closed bone fractures were included in this study. Fifty-two fractures (88%) were simple and 7 (12%) were complex (type C) fractures according to AO classification. The majority of patients (34 cases, 59%) developed femur fractures followed by 24 tibial fractures (41%). Seventeen patients received an external (29%) and 41 an internal fixation (71%). Bone consolidation was reported in 31 patients (53%) with a mean time interval of bone consolidation after 97 days (range from 45 to 160 days; SD = 30). The reported nonunion (pseudarthrosis) rate was 47%. Comparing the internal group (n = 15 patients) versus the external group (n = 14), we could not find any significant difference (P = .939) concerning the bone consolidation time. The Kaplan-Meier analysis showed a 75% cumulative survivorship at 120 days (internal group) versus 111 days (external group). Most common postoperative complications occurred in the internal fixation group with Wound infections being predominantly observed (10%), followed by heterotopic ossifications (8%). CONCLUSIONS: Our results show that surgical treatment of lower limb fractures in chronic SCI patients is a challenging treatment with a high pseudarthrosis rate in both groups. The complication rate seems to be lower in the patients treated with external fixation. As a clinical recommendation, longer implants should be used for a stable osteosynthesis since SCI patients seem to have a higher load on the osteosynthesis material due to missing sensomotoric feedback.