RESUMO
This study investigated the status of bioactive compounds (phenolic compounds, carotenoids, and vitamin C), changes in color performance, and microbiological quality in smoothies preserved by high-pressure processing (HP) and thermal pasteurization (P) during cold storage at 4 °C for 21 days. Chemometric tools were used to select relevant variables that represent the most useful information for the fast and accurate quality assessment of smoothies. HP was performed at 350 and 450 MPa for 5 and 15 min at room temperature, respectively, while P was performed at 85 °C for 7 min. Smoothies were prepared by blending juices of apple (50%, v/v), carrot (20%, v/v), chokeberry (5%, v/v), Indian banana puree (10%, w/v), and almond drink (15%, v/v). The results obtained indicated that lower pressures with a shorter duration of HP showed higher levels of bioactive compounds in the smoothies, compared to the control samples. Compared to P, the HP samples exhibited a greater stability of bioactive compounds during shelf life. HP was found to be highly effective in reducing the native microflora of the smoothies, without subsequent microbial activation during storage. This study demonstrated the usefulness of the chemometric approach in interpreting complex datasets for the effective quality assessment of smoothies treated with different preservation technologies.
RESUMO
In this paper, high-hydrostatic pressure extraction (HHPE) as an emerging food processing and preservation technique constitutes an alternative to conventional thermal treatment that has been used for extraction of polyphenols from tomato peel waste generated by the canning industry. The impact of time (5 and 10 min), temperature (25, 35, 45 and 55 °C) and solvents (water, 1% HCl, 50 and 70% methanol with and without addition of HCl, and 50 and 70% ethanol), at a constant pressure of 600 MPa, has been evaluated in this paper with respect to polyphenols' yields. The results showed a significant (p < 0.05) variation in the contents of a great number of phenolic compounds in respect of the applied temperatures and solvents. On the other hand, the time invested in HHPE had no effect on polyphenols' yields. Among phenolic compounds, the p-coumaric acid (p-CA) and chlorogenic acid derivative (ChA der) are predominant, i.e., 0.57 to 67.41 mg/kg and 1.29 to 58.57 mg/kg, respectively, depending on the solvents and temperatures used. In particular, methanol (50 and 70%) at temperatures of 45 and 55 °C enhanced the recovery of polyphenols in comparison to other utilised solvents. In conclusion, this paper puts forth the theory that by applying HHPE with minimal expenditure of time, it is possible to achieve efficient production of polyphenols from low-cost tomato peel waste, generating income both for producers and agri-food industries.
Assuntos
Polifenóis , Solanum lycopersicum , Antioxidantes , Cromatografia Líquida de Alta Pressão , Pressão Hidrostática , Extratos Vegetais , SolventesRESUMO
This study presents the results of conventional aqueous (CE) and non-conventional ultrasound-assisted (UAE) extractions of polyphenolic compounds from lees extracts of red wine varieties (Merlot and Vranac). The effect of ultrasound extraction time (t, s), and amplitude (A,%) from a 400 W ultrasound processor with different ultrasonic probes diameters (Ds, mm) on the amount and profile of polyphenolic compounds in the obtained extracts was investigated and compared to CE. The optimal conditions resulting in maximum extraction of phenolic compounds were: Probe diameter of 22 mm, amplitude 90% and extraction time for Vranac wine lees 1500 s and for Merlot wine lees extraction time of 1361 s. UAE proved to be significantly more effective in enhancing the extraction capacity of trans-resveratrol glucoside (30.57% to 300%), trans-resveratrol (36.36% to 45.75%), quercetin (39.94% to 43.83%), kaempferol (65.13% to 72.73%), petunidin-3-glucoside (41.53% to 64.95%), malvidin-3-glucoside (47.63% to 89.17%), malvidin-3-(6-O-acetyl) glucoside (23.84% to 49.74%), and malvidin-3-(6-O-p-coumaroyl) glucoside (26.77% to 34.93%) as compared to CE. Ultrasound reduced the extraction time (2.5-fold) and showed an increase of antioxidant potential by 76.39% (DPPH) and 125.83% (FRAP) compared to CE.
RESUMO
The aim of this study was to develop a new cocoa and carob based pastry filling and explore the influences of carob flour and carob gum on the rheological and textural properties, specifically (i) the effect of increasing the amount of carob flour and (ii) the effect of carob bean gum naturally present in the carob flour with seeds versus the commercially available carob bean gum. All samples analyzed in this study exhibited shear thinning behavior. The texture analysis revealed a significant (p < 0.01) increase in consistency and firmness in samples with higher amounts of carob flour added, while higher temperatures significantly (p < 0.01) decreased adhesiveness. When comparing naturally occurring and commercially available LBG (locust bean gum), it was concluded that lower concentrations (up to 0.45% w/w) of naturally occurring LBG work just as well at the same concentrations of commercially available LBG, but this effect cannot be confirmed for higher LBG concentrations, nor for rheological properties determined at higher temperatures (80 °C).
RESUMO
The purpose of our research is to prove that elastic biomechanical characteristics of the temporalis muscle fascia are comparable to those of the fascia lata, which makes the temporalis muscle fascia adequate material for dural reconstruction in the region of the anterior cranial fossa. Fifteen fresh human cadavers, with age range from 33 to 83 years (median age: 64 years; mean age: 64.28 years), were included in the biomechanical study. Biomechanical stretching test with the comparison of elasticity among the tissues of the temporalis muscle fascia, the fascia lata, and the dura was performed. The samples were stretched up to the value of 6% of the total sample length and subsequently were further stretched to the maximum value of force. The value of extension at its elastic limit for the each sample was extrapolated from the force-extension curve and was 6.3% of the total sample length for the fascia lata (stress value of 14.61 MPa), 7.4% for the dura (stress value of 6.91 MPa), and 8% for the temporalis muscle fascia (stress value of 2.09 MPa). The dura and temporalis muscle fascia shared the same biomechanical behavior pattern up to the value of their elastic limit, just opposite to that of the fascia lata, which proved to be the stiffest among the three investigated tissues. There was a statistically significant difference in the extension of the samples at the value of the elastic limit for the fascia lata in comparison to the temporalis muscle fascia and the dura ( p = 0.002; Kruskal-Wallis test). Beyond the value of elastic limit, the temporalis muscle fascia proved to be by far the most elastic tissue in comparison to the fascia lata and the dura. The value of extension at its maximum value of force for the each sample was extrapolated from the force-extension curve and was 9.9% of the sample's total length for the dura (stress value of 10.02 MPa), 11.2% for the fascia lata (stress value of 23.03 MPa), and 18.5% (stress value of 3.88 MPa) for the temporalis muscle fascia. There was a statistically significant difference in stress values at the maximum value of force between the dura and the temporalis muscle fascia ( p = 0.001; Mann-Whitney U test) and between the dura and the fascia lata ( p < 0.001; Mann-Whitney U test). Because of its elasticity and similarity in its mechanical behavior to the dura, the temporalis muscle fascia can be considered the most suitable tissue for dural reconstruction.
RESUMO
The aim of this study was to evaluate the influence of packaging materials and storage conditions on polyphenols stability, colour and sensory characteristics of freeze-dried sour cherry (Prunus cerasus var. Marasca). Freeze-dried sour cherries were packed in high barrier metalized polypropylene and aluminium packaging (PET/PPmet/PE and PET/Al/PE) for up to 12 months at 4, 20 and 37 °C. Characterisation of polyphenol compounds was done by HPLC UV/Vis PDA and in all samples individual anthocyanins (ANTs), flavonol-glycosides (FGs) and hydroxycinnamic acids (HCAs) were determined. Polyphenol content was not markedly affected by freeze-drying and decreases were amounted 1.5-5 %. Furthermore, obtained results indicated that minimal loss of polyphenol content in freeze dried sour cherries were achieved at 4 °C and 3 months of storage. Regardless of the type of packaging materials, samples stored at lower temperature during 12 months, retained the higher content of FGs (quercetin-3-glucoside, kaempferol-3-glucoside, kaempferol-3-rutinoside) and HCAs (neochlorogenic, chlorogenic, p-coumaric, caffeic and ferulic acid) than ANTs (cyanidin-3-glucosylrutinoside, cyanidin-3-rutinoside, cyanidin-3-glucoside, cyanidin-3-sophoroside). The same trend was confirmed with kinetic parameters, also. Sour cherry products packed in both type of laminate and stored at lower temperature retained characteristic dark red colour and sensory properties. This study showed that freeze-dried cherry products have pleasant sensory and very good nutritional properties, and storage in both type of laminates at 4 and 20 °C up to 6 months ensured good product quality.
RESUMO
Carob tree (Ceratonia siliqua L.) is a perennial leguminous evergreen tree native to the coastal regions of the Mediterranean basin and is considered to be an important component of vegetation for economic and environmental reasons. Two constituents of the pod, pulp and seeds, can be used as feed or in food production. In this study, drying characteristics, texture and microstructure of carob pods were studied. Three different carob samples were prepared: whole carob pod, carob pod parts and carob seed. The drying experiments and the modelling showed that carob seeds had the highest drying rate, followed by pod parts and the whole, intact carob fruit. Texture studies showed that the maximum compression force depended on the area of the carob fruit on which compression tests were performed. The seeds showed the highest compression force, followed by the stem zone, the tip and the centre of the fruit. Differences in drying behaviour and texture of carob pods can successfully be interpreted by the micromorphology of the carob pods and seeds. Determining the drying rate, maximum compressive force and micromorphological traits is of great importance for further carob processing (e.g. milling, sieving, carob bean gum production or usage in food or feed products).
RESUMO
OBJECTIVE: To analyze the effect of various fluoride formulations in commercially available agents on working properties of various nickel-titanium orthodontic wires. MATERIALS AND METHODS: Uncoated (NiTi), rhodium coated (RhNiTi) and nitrified (NNiTi) wires were immersed to dH2O, MiPaste, Elmex and Mirafluor for 1 h. Unloading slope characteristics (average force, bending action of the force and average plateau length) and the percentage of useable constant force during unloading were observed. Surface roughness (Ra) was measured. SEM and EDS were used for observation of the surface. RESULTS: NiTi had decreased loading and unloading elastic modulus (E) and yield strength (YS) after immersion to MIPaste and Mirafluor. The unloading YS decreased in the RhNiTi by the MIPaste. The loading and unloading YS of the NNiTi increased in Elmex and increased average plateau force. RhNiTi showed higher average plateau length and the percentage of useful constant force during unloading in Mirafluor and the average plateau force lowered after immersion to MIPaste. The unloading slope characteristics for NiTi were affected by all three prophylactic agents, mostly by Mirafluor, and produced significantly lower forces during both loading and unloading, similarly to the NNiTi wires. The RhNiTi had the lowest forces during both loading and unloading in MIPaste. All results were at significance; p<0.05. Difference in Ra was observed for RhNiTi after immersion to the MI Paste (p<0.001; η2=0.761). CONCLUSION: The NiTi and NNiTi wires lose less working force when combined with Elmex. The RhNiTi improve their working properties with Mirafluor and deteriorate when combined with MiPaste.
Assuntos
Cariostáticos/química , Materiais Revestidos Biocompatíveis/química , Ligas Dentárias/química , Fluoretos/química , Níquel/química , Fios Ortodônticos , Titânio/química , Varredura Diferencial de Calorimetria , Caseínas/química , Diaminas/química , Módulo de Elasticidade , Humanos , Teste de Materiais , Nitrogênio/química , Maleabilidade , Ródio/química , Fluoreto de Sódio/química , Espectrofotometria Atômica , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de TempoRESUMO
In this study, sugar alcohols, dietary fibers, syrups and natural sweeteners were used as sucrose alternatives in the production of reduced sugar chocolates (50% of cocoa parts) with enhanced bioactive profile. Formulated chocolates were evaluated for their physical (particle size distribution, texture) and sensory properties, sugar composition, polyphenolic compounds content and antioxidant capacity. All produced reduced sugar chocolates ensured >20% lower calorific value than conventional chocolate (prepared with sucrose). Formulated chocolates containing stevia leaves and peppermint exhibited the best sensory properties (especially with regard to mouthfeel, sweetness and herbal aroma), as well as the highest polyphenolic content and antioxidant capacity. Particle size and hardness of chocolates increased in comparison to conventional chocolate, in particular when the combination of fructose and isomalt or lactitol was used. The bioactive profile of produced chocolates was enriched with phenolic acids, flavone (luteolin and apigenin) and flavonol (quercetin) derivatives, which were not identified in control chocolate.
Assuntos
Cacau/química , Sacarose/química , Edulcorantes/análise , AntioxidantesRESUMO
Alginate-based blends consisting of carrageenan, pectin, chitosan or psyllium husk powder were prepared for assessment of the best formulation aimed at encapsulation of caffeine. Alginate-pectin blend exhibited the lowest viscosity and provided the smallest beads. Alginate-psyllium husk blend was characterised with higher viscosity, yielding the largest bead size and the highest caffeine encapsulation efficiency (83.6%). The release kinetics of caffeine indicated that the porosity of alginate hydrogel was not reduced sufficiently to retard the diffusion of caffeine from the beads. Chitosan coated alginate beads provided the most retarded release of caffeine in water. Morphological characteristics of beads encapsulating caffeine were adversely affected by freeze drying. Bitterness intensity of caffeine-containing beads in water was the lowest for alginate-psyllium beads and chitosan coated alginate beads. Higher sodium alginate concentration (3%) for production of hydrogel beads in combination with psyllium or chitosan coating would present the most favourable carrier systems for immobilization of caffeine.