RESUMO
In this study, we examined how surface topography and particle medium interact to affect the tribological performance of rubber sliding interfaces, uncovering the mechanisms of particle lubrication under various conditions. We found that microtextured surfaces, created using a mold transfer method, modestly reduced the friction coefficient of rubber under both dry and lubricated states, primarily by altering the real contact area. Additionally, the presence of different microconvex textures on the surface topography significantly influenced rubber's tribological properties. Our three-dimensional morphological analysis revealed that microtextured rubber surfaces with higher Sa, Sku, and Sal and lower Str values consistently showed lower friction coefficients during sliding. The friction mechanism was attributed to the combined effects of the material properties, surface topography, and contact area. With the addition of a particle medium, the dry friction coefficient of the rubber interface decreased but exhibited an initial increase, followed by a decrease with increasing particle diameter. When particles were mixed with a water-based cutting fluid, the concentration, diameter, and wettability of the particles significantly impacted the tribological properties due to the synergistic effects of surface topography and particle lubrication. This work enhances our understanding of tribological control for viscoelastic materials through surface design, providing a theoretical basis for the tribological optimization of rubber surfaces.
RESUMO
Alloy catalysts have been reported to be robust in catalyzing various heterogeneous reactions due to the synergistic effect between different metal atoms. In this work, aimed at understanding the effect of the coordination environment of surface atoms on the catalytic performance of alloy catalysts, a series of PtxCu1-x alloy model catalysts supported on anatase-phase TiO2 (PtxCu1-x/Ti, x = 0.4, 0.5, 0.6, 0.8) were developed and applied in the classic photocatalytic CO2 reduction reaction. According to the results of catalytic performance evaluation, it was found that the photocatalytic CO2 reduction activity on PtxCu1-x/Ti showed a volcanic change as a function of the Pt/Cu ratio, the highest CO2 conversion was achieved on Pt0.5Cu0.5/Ti, with CH4 as the main product. Further systematic characterizations and theoretical calculations revealed that the equimolar amounts of Pt and Cu in Pt0.5Cu0.5/Ti facilitated the generation of more Cu-Pt-paired sites (i.e., the higher coordination number of Pt-Cu), which would favor a bridge adsorption configuration of CO2 and facilitate the electron transfer, thus resulting in the highest photocatalytic CO2 reduction efficiency on Pt0.5Cu0.5/Ti. This work provided new insights into the design of excellent CO2 reduction photocatalysts with high CH4 selectivity from the perspective of surface coordination environment engineering on alloy catalysts.
RESUMO
BACKGROUND: Ischemia/reperfusion injury (IRI) can lead to acute kidney injury and result in high disability and mortality rates. Cystathionine γ-lyase (CSE)-produced hydrogen sulfide (H2S) has been confirmed to play a protective role in renal IRI. While autophagy is involved in renal IRI, its role in the regulation by endoplasmic reticulum stress (ERS) has not been considered. Our study explored the role of CSE/H2S in protecting against renal IRI by regulating ERS-induced autophagy. METHODS: C57/BL6 mice were subjected to 30-min renal ischemia followed by .24-h reperfusion injury (IRI). The H2S donor sodium hydrosulfide hydrate (NaHS) or the CSE inhibitor D,L-propargylglycine (PAG) was injected intraperitoneally (i.p) into the mice. Serum creatinine and urea nitrogen levels were analyzed to evaluate renal function. Renal tubule epithelial cell damage was measured by HE and PAS staining. ERS and microtubule-associated protein light chain 3 (LC3) autophagy (LC3-I to LC3-II conversion) were analyzed by using western blotting. RESULTS: In a C57/BL6 mouse model of acute renal IRI, the application of IRI impaired the renal function, which was accompanied by elevated serum creatinine (P < 0.001) and urea nitrogen levels (P < 0.001). While NaHS pretreatment dramatically attenuated renal IRI, PAG administration exacerbated renal IRI (P < 0.001). Furthermore, NaHS treatment inhibited the ERS-induced increased LC3II/I protein ratio (P < 0.001); increased Beclin-1 protein expression (P < 0.001); PAG pretreatment exacerbated the effects of ERS on both the LC3II/I ratio (P < 0.001) and the Beclin-1 protein expression (P < 0.001). CONCLUSIONS: Our results suggest that the CSE/H2S system is an important therapeutic target for protecting against renal IRI, and it may protect renal tubule epithelial cells from IRI by suppressing ERS-induced autophagy.
Assuntos
Injúria Renal Aguda , Traumatismo por Reperfusão , Sulfetos , Camundongos , Animais , Proteína Beclina-1/farmacologia , Creatinina , Traumatismo por Reperfusão/metabolismo , Autofagia , Isquemia/complicações , Estresse do Retículo Endoplasmático , Nitrogênio/farmacologia , UreiaRESUMO
Two types of functional surfaces with the same roughness but completely different surface topographies are prepared, namely positively skewed surfaces filled with micropillar arrays (Sa ≈4.4 µm, Ssk >0) and negatively skewed surfaces filled with microcavity arrays (Sa ≈4.4 µm, Ssk <0), demonstrating promoting droplet splashing. Remarkably, the critical Weber number for generating satellite droplets on the negatively skewed surfaces is significantly lower than that on the positively skewed surfaces, indicating that the negatively skewed surface with microcavity arrays is more likely to promote droplet splashing. It is mainly attributed to the fact that air on the negatively skewed surface can make the liquid film take on a Cassie-Baxter state on the surface so that the stabilizing capillary force of the liquid film exceeds the destabilizing stress of the air film. Moreover, the surface topography promoting droplet spreading and the mechanical properties of three-phase moving contact lines are analyzed from the perspective of microscopic interface mechanics. Finally, it is demonstrated the designed positively skewed surfaces can be employed for large-area heat dissipation by means of high-efficiency evaporation.
RESUMO
CONTEXT: Despite the important role of inflammation-related factors on the occurrence of chronic diseases, there is still conflicting evidence about the effects of the ketogenic diet (KD) on these factors. OBJECTIVE: In order to obtain a better viewpoint, this study aimed to comprehensively investigate the effects of a KD on inflammation-related markers. DATA SOURCES: To find pertinent randomized controlled trials up to August 2023, databases including PubMed/Medline, Web of Science, Scopus, Cochrane Library, and Embase were searched. DATA EXTRACTION: This study included all randomized controlled trials investigating the effects of a KD on C-reactive protein (CRP), tumor necrosis factor-alpha (TNF-α), interleukin (IL)-6, IL-8, and IL-10 levels. Pooled weighted mean difference (WMD) and 95% confidence intervals (CIs) were achieved by random-effects model analysis for the best estimation of outcomes. DATA ANALYSIS: Forty-four studies were included in this article. The pooled findings showed that a KD has an effect on lowering TNF-α (WMD: -0.32 pg/mL; 95% CI: -0.55, -0.09; P = 0.007) and IL-6 (WMD: -0.27 pg/mL; 95% CI: -0.52, -0.02; P = 0.036) compared with control groups. However, no significant effect was reported for others inflammation marker-related levels. The results of the subgroup analysis showed that, in trials following the KD for ≤8 weeks and in people aged ≤50 years, the reduction in TNF-α levels was significantly higher than in other groups. In addition, in people with a body mass index greater than 30 kg/m2 compared to a body mass index ≤30 kg/m2, IL-6 levels decreased to a greater extent after receiving the KD. CONCLUSIONS: Consequently, adherence to a KD appears to improve some markers associated with inflammation, including TNF-α and IL-6.
RESUMO
A template-free pyrolysis route has been developed using condensation-assembly precursors made of trimethoxyboroxane (TMB) and melamine (M) to cater the requirements of an industrial real-world environment. The precursors contain abundant B-N bonds and exhibit a high level of interconnectivity, resulting in 3D-PBN with enhanced mechanical properties and the ability to be easily customized in terms of shape. Moreover, 3D-PBN demonstrates rapid adsorption kinetics and excellent reusability, efficiently removing up to 270% of its own weight of fuel within 30 s and being readily regenerated through simple calcination. Even after undergoing 50 cycles, the mechanical properties remain at a remarkable 80%, while the adsorption performance exceed 95%. Furthermore, a comprehensive analysis of thermal behavior from precursor to 3D-PBN has been conducted, leading to the proposal of a molecular-scale evolution process comprising four major steps. This understanding enables us to control the phase reaction and regulate the composition of the products, which is crucial for determining the characteristics of the final product.
Assuntos
Compostos de Boro , Porosidade , Compostos de Boro/químicaRESUMO
Freeze-thawing (F/T) is an effective method of sludge dewatering preconditioning and has been studied in many studies. However, previous studies have taken landfill sludge from different regions, filled for different length of time or at different depth, resulting in large differences in initial water content and different treatment effects. Therefore, the effect of initial water content on the dewatering characteristics of F/T preconditioned landfill sludge has been investigated. The sludge with different initial water contents was firstly preconditioned by one F/T cycle. Then the F/T sludge was vacuum filtered and compared with the dewatering performance of FeCl3 preconditioned sludge with the same water content. Finally, the mechanism of the initial water content on the effect of F/T preconditioning was analyzed by the change of sludge internal composition. The results show that the higher the initial water content of the sludge, the greater the improvement of its dewatering performance after F/T preconditioning. The specific resistance and water content after filtration of sludge after F/T conditioning decreased greatly with the increase of the initial water content, reaching their respective minimum values of 13.3 × 1012 m/kg and 58.3% at 85% and 87.5%. These values are lower than the optimal values observed for the sludge conditioned by FeCl3. With the rise in initial water content, the driving force at the ice-water interface gains strength. Small particles aggregate into larger flocs, forming stable drainage channels that enhance the dewatering performance of sludge. Once the initial water content surpasses 85%, the squeezing force exerted by ice crystals amplifies the degree of cracking in sludge particles, releasing bound water and further decreasing the water content of sludge.
Assuntos
Esgotos , Água , Água/química , Eliminação de Resíduos Líquidos/métodos , Gelo , Filtração , Instalações de Eliminação de ResíduosRESUMO
Mn-based catalysts preferred in low-temperature selective catalytic reduction (SCR) are susceptible to SO2 poisoning. The stubborn sulfates make insufficient O2 activation and result in deficient reactive oxygen species (ROS) for activating reaction molecules. H2O has long been regarded as an accomplice to SO2, hastening catalyst deactivation. However, such a negative impression of the SCR reaction was reversed by our recent research. Here, we reported a H2O contribution over Mn-based SCR catalysts to counteract SO2 poisoning through accessible O2 activation, in which O2 was synergistically activated with H2O to generate ROS for less deactivation and more expected regeneration. The resulting ROS benefited from the energetically favorable route supported by water-induced Ea reduction and was actively involved in the NH3 activation and NO oxidation process. Besides, ROS maintained high stability over the SO2 + H2O-deactivated γ-MnO2 catalyst throughout the mild thermal treatment, achieving complete regeneration of its own NO disposal ability. This strategy was proven to be universally applicable to other Mn-based catalysts.
RESUMO
The impact of droplets on particles involves a wide range of complex phenomena and mechanisms, including bubble nucleation, crater formation, fluidization, and more intricate changes in the boiling regime when impacting superheated particles. In this study, we focus on droplet impact behavior on superheated laminar particles at various temperatures and define six typical characteristic patterns of a single droplet impact on superheated laminar particles, including film evaporation, bubbly boiling, immersion boiling, sputter boiling, transition boiling, and film boiling. It is worth noting that the variations of inertial force FI caused by gravity, the capillary force FC generated by the pores of the droplets, and the dewetting force by the vapor phase FV are the main contributors to different evaporation regimes. Interestingly, we find that the Leidenfrost point (LFP) of droplets on the laminar superheated particles decreases with particle size, which is related to the effect of the pore space generated between the laminar particles. Finally, the effect of temperature, particle size, and Weber number (We) on the dynamic behavior of droplet impact is revealed. Experimental results show that the instantaneous diameter of droplets is inversely proportional to the change of height, with different patterns of maximum spreading diameter and maximum bounce height at different particle sizes, while the maximum spreading velocity and maximum bounce velocity are independent of particle size. We believe the present work would provide a broader knowledge and comprehension of the droplet impact on heated particles and promote the development of the safety and productivity of industrial processes such as fluid catalytic cracking, spray drying, and spray cooling.
RESUMO
Regulation over the generation of the Leidenfrost phenomenon in liquids is vitally important in a cutting fluid/tool system, with benefits ranging from optimizing the heat transfer efficiency to improving the machining performance. However, realizing the influence mechanism of liquid boiling at various temperatures still faces enormous challenges. Herein, we report a kind of microgrooved tool surface by laser ablation, which could obviously increase both the static and dynamic Leidenfrost point of cutting fluid by adjusting the surface roughness (Sa). The physical mechanism that delays the Leidenfrost effect is primarily due to the ability of the designed microgroove surface to store and release vapor during droplet boiling so that the heated surface requires higher temperatures to generate sufficient vapor to suspend the droplet. We also find six typical impact regimes of cutting fluid under various contact temperatures; it is worth noting that Sa has a great influence on the transform threshold among six impact regimes, and the likelihood that a droplet will enter the Leidenfrost regime decreases with increasing Sa. In addition, the synergistic effect of Sa and tool temperature on the droplet kinetics of cutting droplets is investigated, and the relationship between the maximum rebound height and the dynamic Leidenfrost point is correlated for the first time. Significantly, cooling experiments on the heated microgrooved surface are performed and demonstrate that it is effective to improve the heat dissipation ability of cutting fluid by delaying the Leidenfrost effect on the microgrooved heated surface.
RESUMO
Polymer-reinforced silica aerogels are thermally insulating materials employed to enhance mechanical properties; however, they exhibit low heat stability and require a complex production process. The main body of this work concerns the synthesis of silicon-containing polyarylacetylene (PSA) resin, which has exceptional thermal properties and is used to strengthen the gel skeleton and significantly improve the heat resistance of the polymer reinforcement phase. The honeycomb-like porous SiO2/PSA aerogels derived from directional freezing were obtained via click reaction, gel aging, freeze-drying, and curing without the requirement for time-consuming solvent replacement. The prepared SiO2/PSA aerogel is low density (â¼0.3 g/cm3) and high porosity (â¼80%), which provides the material with low levels of thermal conductivity (â¼0.06 W/m·K) and excellent thermal insulation performance. When compared to the majority of polymer aerogels and aerogel-like materials, the prepared SiO2/PSA aerogels have high Td5 (â¼460 °C) and Yr800 (â¼80%) and compressive strength (compression strength > 1.5 MPa). SiO2/PSA composite aerogel has numerous functions in areas where materials must withstand extremely elevated temperatures, such as the aerospace industry.
RESUMO
The size effect on nanoparticles, which affects the catalysis performance in a significant way, is crucial. The tuning of oxygen vacancies on metal-oxide support can help reduce the size of the particles in active clusters of Pt, thus improving catalysis performance of the supported catalyst. Herein, Ce-Sn solid solutions (CSO) with abundant oxygen vacancies have been synthesized. Activated by simple CO reduction after loading Pt species, the catalytic CO oxidation performance of Pt/CSO was significantly better than that of Pt/CeO2 . The reasons for the elevated activity were further explored regarding ionic Pt single sites being transformed into active Pt clusters after CO reduction. Due to more exposed oxygen vacancies, much smaller Pt clusters were created on CSO (ca. 1.2â nm) than on CeO2 (ca. 1.8â nm). Consequently, more exposed active Pt clusters significantly improved the ability to activate oxygen and directly translated to the higher catalytic oxidation performance of activated Pt/CSO catalysts in vehicle emission control applications.
RESUMO
It is inevitable that scar formation occurs between the spinal dura and surrounding tissues after laminectomy. While extensive epidural fibrosis, which results in limited nerve root activity and severe pain, is the main cause of postoperative failed-back surgery syndrome. Novel biomaterial loading effective drugs based on reasonable design are eagerly needed for the safe and effective prevention of epidural adhesions. We filtrated a suitable dose of pirfenidone (PFD) to load hyaluronic acid methacryloyl (HAMA) hydrogel in vitro. And then, we compare PFD-loaded HAMA hydrogel with only using PFD or HAMA hydrogels after laminectomy by in vivo studies in rats. We describe a safe and efficient anti-adhesive PFD-loaded HAMA hydrogel that prevents epidural fibrosis through the stable and sustained release of PFD. It was shown that the PFD-loaded HAMA hydrogel effectively inhibited cell penetration and suppressed collagen I/III expression. Thus, it effectively prevented the formation of adhesions through pharmacological and physical processes. The PFD-loaded HAMA hydrogel can effectively prevent adhesion formation in both pharmacological and physical barrier effects.
Assuntos
Ácido Hialurônico , Hidrogéis , Ratos , Animais , Ácido Hialurônico/farmacologia , Laminectomia/efeitos adversos , Espaço Epidural/patologia , Aderências Teciduais/prevenção & controle , FibroseRESUMO
Globally, landfill sludge (LS) has accumulated in large quantities, and its reduction and dewatering are urgently needed. To address pollution problems and clogging of drainage boards caused by chemical conditioning combined with traditional vacuum preloading (TVP), a freeze-thaw combined with step vacuum preloading (F/T-SVP) method is proposed. A comparative experimental study was carried out between TVP and SVP to explore the anti-clogging mechanism of F/T-SVP in treating LS. As a result, the water discharge for the original sludge (OS) is 1840 ml, the water discharge for TVP is 8830 ml and for SVP is 10,010 ml; The total settlement of SVP is 16% higher than that of TVP; TVP has a volume reduction ratio of 57.6%, while SVP has 66.8%; the OS's water content was 86%, which was reduced to 57.6% by F/T-SVP; The center of the drainage board of TVP is seriously clogged, while the particles of SVP are evenly distributed; The tendency for small particles to undergo transport is relatively low at the beginning of SVP, which can effectively reduce clogging; TVP mainly focuses on the compression of large pores into small pores, and SVP mainly focuses on the compression of large into small pores and micropores. In SVP, there is more consolidation and a more compact structure. When F/T-SVP is used to treat LS, the pores are gradually penetrated, effectively avoiding the generation of clogging and improving LS's drainage and consolidation.
Assuntos
Esgotos , Instalações de Eliminação de Resíduos , Vácuo , Congelamento , Água/química , Eliminação de Resíduos LíquidosRESUMO
Strong metal-support interactions (SMSIs) have a significant effect on the performance of supported noble-metal catalysts for volatile organic compound (VOC) elimination. Herein, the strength of the SMSI of Pt/OMS-2 between Pt and the OMS-2 support is regulated by simply changing calcination temperatures, and the catalyst calcined at 300 °C (Pt/OMS-2-300) performs the best in the catalytic combustion of toluene. Through systematic structural characterizations, it is revealed that much more Pt2+-Ov-Mnδ+ species are formed in Pt/OMS-2-300, which can help facilitate the generation of more reactive oxygen species and promote lattice oxygen mobility. Moreover, the results of in situ DRIFTS experiments further confirm that abundant Pt2+-Ov-Mnδ+ species at the Pt-MnO2 interface on Pt/OMS-2-300 can better enhance the adsorption and activation of toluene, thus boosting the catalytic performance in toluene combustion. This newly developed strategy of thermal-driven regulation of the SMSI provides a novel perspective for constructing highly efficient catalysts for VOC emission control.
RESUMO
The presence of antibiotic contaminants in aqueous environment already poses significant risks to ecological sustainability, biodiversity and human public health and safety. Therefore, it is urgent to develop practical water pollution control technologies and new materials. Here, we prepared CuO-Co3 O4 co-modified porous boron nitride fibers (P-BNFs) for the adsorption and removal of tetracycline antibiotics (TCs) in aqueous environment. The prepared adsorbents were characterized by XRD, FTIR, XPS, SEM, TEM and BET, and the adsorption behavior was explored by batch experiments. The results show that the removal percentage for doxycycline (DC) reaches 98.68 %, which was much higher than that of P-BNFs, and the modification results of P-BNFs with CuO or Co3 O4 alone. After five regeneration cycles, the removal rate of DC by CuO-Co3 O4 /P-BNFs was still as high as 89.33 %. This is promising and indicates that the prepared CuO-Co3 O4 /P-BNFs adsorbent has good renewable recycling performance and practical application prospects.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Humanos , Adsorção , Porosidade , Antibacterianos , ÁguaRESUMO
After spinal cord injury (SCI), there are complex pathological states in which the formation of scar tissues is a great obstacle to nerve repair. There are currently many potential treatments that can help to reduce the formation of glial scars. However, little attention has been paid to fibrous scarring. Astrocytes have neuroprotective effects on the central nervous system. Similar to other cells, they release small extracellular vesicles (sEVs). Astrocytes, pericytes, endothelial cells, and the basement membrane constitute the blood-spinal cord barrier. It can be seen that astrocytes are structurally closely related to pericytes that form fibrous scars. In this study, astrocyte-derived sEVs were injected into rats with SCI to observe the formation of fibrosis at the site of spinal cord injury. We found that astrocyte-derived sEVs can be ingested by pericytes in vitro and inhibit the proliferation and migration of pericytes. In vivo, astrocyte-derived sEVs could converge around the injury, promote tissue repair, and reduce fibrosis formation, thus promoting the recovery of limb function and improving walking ability. In conclusion, sEVs derived from astrocytes can reduce fibrosis and improve functional recovery after SCI, which provides a new possibility for the study of SCI.
Assuntos
Vesículas Extracelulares , Traumatismos da Medula Espinal , Ratos , Animais , Astrócitos , Células Endoteliais/patologia , Traumatismos da Medula Espinal/terapia , Traumatismos da Medula Espinal/patologia , Recuperação de Função Fisiológica/fisiologia , Fibrose , Vesículas Extracelulares/patologia , Medula Espinal/patologiaRESUMO
The wear-resistant superhydrophobic (SHB) surfaces with excellent water-repellency ability were prepared by constructing a microtextured armor on an aluminum surface. With the assistance of laser-induced microtextures, the SHB surface could keep a longer water-repellency ability and a lower friction coefficient even after repeated friction tests under different loads and at different speeds. The mechanism of microtexture-protecting SHB coating is revealed based on both theoretical and elemental analysis. Additionally, we explore the relationship between the three-dimensional topography parameters (ISO 25178) and variation of water contact angles under different test recycles. The results show that the rough surface with appropriate Sa and higher Sku exhibits a better wear resistance, which is mainly related to the storing ability of SHB coating inside the microtextures. Moreover, the surface with appropriate Str exhibits excellent wear resistance, which is mainly associated with better chip-removal ability. Finally, the tribological properties of the microtextured SHB surface are researched. It is worth noting that compared with the microtextured surface without SHB coating and the SHB-coated surface without microtextures, the microtextured SHB surface has the lowest friction coefficient under dry friction because the SHB coating would largely decrease the surface energy of the interface, so the adhesion friction decreases. The microtexture armor on the surfaces would protect the wear of SHB coating, so the SHB coating inside the microtexture could continuously play the role of a particle lubricant at the sliding interface and decrease the friction force of the sliding interface. We believe that the present study would contribute to the further understanding of the constructing mechanism of anti-wear SHB surfaces and provide a new strategy for topography design of engineering surfaces with friction reduction properties.
RESUMO
The freeze-thaw vacuum method for conditioning pretreated sludge has been proved that it not only has greater dewatering efficiency but also is more ecologically friendly. In this paper, the experiment is improved to address shortcomings in previous freeze-thaw vacuum approach for sludge treatment. The spatio-temporal distribution relationship of distance-time-temperature is developed and divided into two stages by numerically fitting the temperature change of freezing tubes in the sludge. It is expected to guide the time control of large-scale frozen sludge in practical engineering applications to achieve optimal dewatering treatment. Furthermore, the performance of dehydration after the model test is evaluated on multi-scale: settlement and mechanical properties (macroscopic perspective), mean particle size (mesoscopic perspective), and SEM microstructure (microscopic perspective). The results reveal that the improved sludge treatment method of alternating freeze-thaw vacuum procedures, using both prefabricated horizontal drains (PHDs) and prefabricated vertical drains (PVDs), substantially benefits the sludge dewatering and reduction. This method results in an unparalleled volume reduction of 63.51% and a water content reduction to 58.54%. Moreover, in-situ vane shearing strength of the sludge obtained from the improved test meets the strength requirement for the landfill final cover soil, demonstrating that the method is superior in improving mechanical properties.
Assuntos
Esgotos , Eliminação de Resíduos Líquidos , Desidratação , Congelamento , Humanos , Esgotos/química , Temperatura , Eliminação de Resíduos Líquidos/métodos , Água/químicaRESUMO
Control over the generation of air cavities in liquids is vitally important in numerous underwater marine systems, with behaviors ranging from largely reducing the fluid resistance to minimizing the energy consumption. However, reducing the critical velocity of air cavity generation simultaneously on both original and hydrophobic materials can be mutually exclusive. In strong contrast to the view that the surface wettability is what determines the critical velocity of air cavity entrainment, we report a facile method to dramatically reduce the critical velocity of air cavity generation by etching a kind of biomimetic microstructure on the sphere surface. It is worth noting that the generation of air cavities induced by the microstructure effect is almost independent of surface wettability; even for the hydrophilic spheres, the critical velocity of air cavity generation is reduced by over 86.3%. The physical mechanism is mainly related to the pinning of the moving contact line and the regulable transition of the wetting state from the Wenzel model to the Cassie-Baxter model at the solid-liquid-air interface. We also investigated the stability of the microstructured spheres to induce underwater air cavities and found that a continuous and robust air cavity could still be produced even after 1200 repeated impacts. This research provides a simple, economical and energy-efficient method for minimizing the critical velocity for generating air cavity entrainment to reduce hydrodynamic drag.