Optical heating-induced spectral tuning of supercontinuum generation in liquid core fibers using multiwall carbon nanotubes.

In this work, we demonstrate the optical heating modulation of soliton-based supercontinuum generation through the employment of multi-walled carbon nanotubes (MW-CNTs) acting as fast and efficient heat generators. By utilizing highly dispersion-sensitive liquid-core fibers in combination with MW-CNTs coated to the outer wall of the fiber, spectral tuning of dispersive waves with response times below one second via exploiting the strong thermo-optic response of the core liquid was achieved. Local illumination of the MW-CNTs coated fiber at selected points allowed modulation of the waveguide dispersion, thus controlling the soliton fission process. Experimentally, a spectral shift of the two dispersive waves towards the region of anomalous dispersion was observed at increasing temperatures. The presented tuning concept shows great potential in the context of nonlinear photonics, as complex and dynamically reconfigurable dispersion profiles can be generated by using structured light fields. This allows investigating nonlinear frequency conversion processes under unconventional conditions, and realizing nonlinear light sources that are reconfigurable quickly.

Impact of thermal annealing and laser treatment on the morphology and optical responses of mono- and bi-metallic plasmonic honeycomb lattice.

Plasmonic nanoparticle arrays with a specific lattice arrangement can support surface lattice resonances (SLRs). SLR exhibits a sharp spectral peak and finds many applications including optical sensing and plasmonic lasers. To optimize SLR for application, a robust method that allows the mass production of plasmonic nanoparticle arrays with refined particle morphology and well-defined lattice arrangement is required. In this work, we combine nanosphere lithography (NSL) with thermal annealing or nanosecond-pulsed laser treatment to refine plasmonic nanoparticles in a honeycomb lattice. We comparatively study the effects of the two treatment methods on the particle morphology and lattice arrangement of mono (Ag and Pd) and bi-metallic (Ag-Pd) nanoparticle lattices. In general, thermal annealing preserves the lattice arrangement but fairly changes the particle roundness, while laser treatment produces particles with varying morphologies and spatial distribution. We also theoretically and experimentally investigate the optical responses of Ag nanoparticle lattices produced by different treatment methods. The observed difference in spectra can be attributed to the varying particle morphology, which shifts the localized surface plasmon resonance differently, resulting in a significant change in SLR. These findings provide valuable insights for optimizing plasmonic nanoparticle arrays for various applications.

Antireflection Structures for VIS and NIR on Arbitrarily Shaped Fused Silica Substrates with Colloidal Polystyrene Nanosphere Lithography.

Antireflective (AR) nanostructures offer an effective, broadband alternative to conventional AR coatings that could be used even under extreme conditions. In this publication, a possible fabrication process based on colloidal polystyrene (PS) nanosphere lithography for the fabrication of such AR structures on arbitrarily shaped fused silica substrates is presented and evaluated. Special emphasis is placed on the involved manufacturing steps in order to be able to produce tailored and effective structures. An improved Langmuir-Blodgett self-assembly lithography technique enabled the deposition of 200 nm PS spheres on curved surfaces, independent of shape or material-specific characteristics such as hydrophobicity. The AR structures were fabricated on planar fused silica wafers and aspherical planoconvex lenses. Broadband AR structures with losses (reflection + transmissive scattering) of <1% per surface in the spectral range of 750-2000 nm were produced. At the best performance level, losses were less than 0.5%, which corresponds to an improvement factor of 6.7 compared to unstructured reference substrates.

Porous spherical gold nanoparticles via a laser induced process.

Nanoparticles consisting of a mixture of several metals and also porous nanoparticles due to their special structure exhibit properties that find applications in spectroscopic detection or catalysis. Different approaches of top down or bottom up technologies exist for the fabrication of such particles. We present a novel combined approach for the fabrication of spherical porous gold nanoparticles on low-cost glass substrates under ambient conditions using a UV-laser induced particle preparation process with subsequent wet chemical selective etching. In this preparation route, nanometer-sized branched structures are formed in spherical particles. The laser process, which is applied to a silver/gold bilayer system with different individual layer thicknesses, generates spherical mixed particles in a nanosecond range and influences the properties of the fabricated nanoparticles, such as the size and the mixture and thus the spectral response. The subsequent etching process is performed by selective wet chemical removal of silver from the nanoparticles with diluted nitric acid. The gold to silver ratio was investigated by energy-dispersive X-ray spectroscopy. The porosity depends on laser parameters and film thickness as well as on etching parameters such as time. After etching, the surface area of the remaining Au nanoparticles increases which makes these particles interesting for catalysis and also as carrier particles for substances. Such substances can be positioned at defined locations or be released in appropriate environments. Absorbance spectra are also analyzed to show how the altered fractured shape of the particles changes localized plasmon resonances of the resultingt particles.

Metallo-ß-lactamases inhibitor fisetin attenuates meropenem resistance in NDM-1-producing Escherichia coli.

The prevalence and development of New Delhi metallo-ß-lactamase-1 (NDM-1) have led to increases in bacterial resistance to the majority of clinically used antibiotics, including carbapenems. This study attempts to identify a novel inhibitor of NDM-1 for resistant bacteria infection. Herein, we found that fisetin, as an agent, distinctly inhibits the activity of NDM-1 (IC50 = 9.68 µg/mL) through on enzyme activity inhibition screening. Notably, fisetin is a metallo-ß-lactamases inhibitor without the ability to chelate zinc ions, as well as with a significantly inhibitory effect on NDM-9, VIM-1, IMP-1 and KPC-2. The combination of fisetin with meropenem could attenuate meropenem resistance in NDM-1-positive Escherichia coli. The MIC values of combined treatment were lower than those found for meropenem or fisetin alone (FICI from 0.25 ± 0.00 to 0.38 ± 0.00) although fisetin lacks antibacterial activities (MIC＞1024 µg/mL). Furthermore, fisetin combined with meropenem could kill all tested bacteria no more than 3 h in vitro and this synergistic effect could also be observed in vivo. Molecular dynamics simulations revealed that fisetin successfully inhibit the hydrolytic activity of NDM-1. Additionally, the mutation of NDM-1 resulted in a decreased inhibition of NDM-1 activity by fisetin compared with the WT protein. Finally, our results indicate that fisetin is an effective NDM-1 inhibitor, which suggests the combination of this compound with meropenem is a promising strategy for carbapenem-resistant bacterial infection.

Copper Iodide on Spacer Fabrics as Textile Thermoelectric Device for Energy Generation.

The integration of electronic functionalities into textiles for use as wearable sensors, energy harvesters, or coolers has become increasingly important in recent years. A special focus is on efficient thermoelectric materials. Copper iodide as a p-type thermoelectrically active, nontoxic material is attractive for energy harvesting and energy generation because of its transparency and possible high-power factor. The deposition of CuI on polyester spacer fabrics by wet chemical processes represents a great potential for use in textile industry for example as flexible thermoelectric energy generators in the leisure or industrial sector as well as in medical technologies. The deposited material on polyester yarn is investigated by electron microscopy, x-ray diffraction and by thermoelectric measurements. The Seebeck coefficient was observed between 112 and 153 µV/K in a temperature range between 30 °C and 90 °C. It is demonstrated that the maximum output power reached 99 nW at temperature difference of 65.5 K with respect to room temperature for a single textile element. However, several elements can be connected in series and the output power can be linear upscaled. Thus, CuI coated on 3D spacer fabrics can be attractive to fabricate thermoelectric devices especially in the lower temperature range for textile medical or leisure applications.

Myricetin inhibits the type III secretion system of Salmonella enterica serovar typhimurium by downregulating the Salmonella pathogenic island I gene regulatory pathway.

Based on the in-depth study of type III secretion systems (T3SS) in pathogenic bacteria, approaches targeting T3SS have become new alternative strategies to combat drug-resistant bacterial infections. As an important food-borne pathogen, Salmonella enterica serovar Typhimurium (S. Typhimurium) injects effector proteins into host cells through the T3SS to disrupt cell signaling and host responses. In this study, myricetin was screened for its ability to block the translocation function of effector proteins (SipA/SipB) using cell biology and molecular biology methods. It exerted strong effects on inhibiting the expression of Salmonella pathogenicity island 1 (SPI-1)-associated effector proteins without affecting S. Typhimurium growth and thus prevented S. Typhimurium from invading HeLa cells and ultimately inhibited S. Typhimurium-mediated cell damage. In an animal experiment, myricetin comprehensively protected mice from death and pathological damage. A further analysis of the mechanism of action showed that myricetin interfered with the regulatory network of SPI-1-related genes, resulting in a significant decrease in the levels of key effector proteins, and thus inhibited T3SS-mediated virulence. In summary, this study provides a solution for clinical resistance to S. Typhimurium infection and potential candidate compounds. Myricetin, a potential T3SS inhibitor, possesses effective biological activity and exerts protective effects in vitro and in vivo. Myricetin will likely be developed as a novel type of antibiotic targeting S. Typhimurium infections in the future.

Biomimic Vein-Like Transparent Conducting Electrodes with Low Sheet Resistance and Metal Consumption.

In this contribution, inspired by the excellent resource management and material transport function of leaf veins, the electrical transport function of metallized leaf veins is mimicked from the material transport function of the vein networks. By electroless copper plating on real leaf vein networks with copper thickness of only several hundred nanometre up to several micrometre, certain leaf veins can be converted to transparent conductive electrodes with an ultralow sheet resistance 100 times lower than that of state-of-the-art indium tin oxide thin films, combined with a broadband optical transmission of above 80% in the UV-VIS-IR range. Additionally, the resource efficiency of the vein-like electrode is characterized by the small amount of material needed to build up the networks and the low copper consumption during metallization. In particular, the high current density transport capability of the electrode of > 6000 A cm-2 was demonstrated. These superior properties of the vein-like structures inspire the design of high-performance transparent conductive electrodes without using critical materials and may significantly reduce the Ag consumption down to < 10% of the current level for mass production of solar cells and will contribute greatly to the electrode for high power density concentrator solar cells, high power density Li-ion batteries, and supercapacitors.

Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells.

We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition. Annealing under N2 atmosphere improves the electrode's conductivity and the catalytic activity of graphene and MWCNTs to reduce the I3- species within the electrolyte of the DSSC. The performance of different counter-electrodes is compared for ZnO photoanode-based DSSCs. Bilayer electrodes show higher power conversion efficiencies than monolayer graphene electrodes or monolayer MWCNTs electrodes. The bilayer graphene (bottom)/MWCNTs (top) counter electrode-based DSSC exhibits a maximum power conversion efficiency of 4.1 % exceeding the efficiency of a reference DSSC with a thin film platinum counter electrode (efficiency of 3.4 %). In addition, the double self-assembled counter electrodes are mechanically stable, which enables their recycling for DSSCs fabrication without significant loss of the solar cell performance.

[Design push-pull osmotic pump tablets of famotidine based on an expert system for the formulation design of osmotic pump of poor water-soluble drug].

The purpose of this study is to design push-pull osmotic pump (PPOP) tablets of famotidine using the expert system for the formulation design of osmotic pump of poor water-soluble drug which had been established by the authors. Firstly, the parameters which were requisite of the system input were obtained from literatures and experimental tests. Then the parameters were input into the system, and the program was run. The system displayed the designed formulations sequential. Finally, famotidine PPOP was prepared according to the designed formulations and the in vitro dissolution was carried out. It was found out that the target formulation of famotidine PPOP which could release for 24 hours was obtained in a very short period. Meanwhile, the practicability of the established expert system was proved.