Quercetin alleviates inflammation induced by porcine reproductive and respiratory syndrome virus in MARC-145 cells through the regulation of arachidonic acid and glutamine metabolism.

BACKGROUND: Porcine reproductive and respiratory syndrome virus (PRRSV) infection causes severe inflammatory response, respiratory disease and sow reproductive failure. Quercetin is among the widely occurring polypheno found abundantly in nature. Quercetin has anti-inflammatory, anti-oxidative and anti-viral properties. OBJECTIVES: This study aimed to explore the effect and mechanism of quercetin on PRRSV-induced inflammation in MARC-145 cells. METHODS: Observing the cytopathic effect and measurements of inflammatory markers in MARC-145 cells collectively demonstrate that quercetin elicits a curative effect on PRRSV-induced inflammation. Liquid chromatography-mass spectrometry was further used for a non-targeted metabolic analysis of the role of quercetin in the metabolic regulation of PRRSV inflammation in MARC-145 cells. RESULTS: It was shown that quercetin attenuated PRRSV-induced cytopathy in MARC-145 cells. Quercetin treatment inhibited PRRSV replication in MARC-145 cells in a dose-dependent manner. We also found that quercetin inhibited PRRSV-induced mRNA expression and secretion levels of tumour necrosis factor-α, interleukin 1ß and interleukin 6. Metabolomics analysis revealed that quercetin ameliorated PRRSV-induced inflammation. Pathway analysis results revealed that PRRSV-induced pathways including arachidonic acid metabolism, linoleic acid, glycerophospholipid and alanine, aspartate and glutamate metabolism were suppressed by quercetin. Moreover, we confirmed that quercetin inhibited the activation of NF-κB/p65 pathway, probably by attenuating PLA2, ALOX and COX mRNA expression. CONCLUSIONS: These results provide a crucial insight into the molecular mechanism of quercetin in alleviating PRRSV-induced inflammation.

Factors Affecting the Effectiveness and Safety of Polymyxin B in the Treatment of Gram-negative Bacterial Infections: A Meta-Analysis of 96 Articles.

PURPOSE: Polymyxin B, with its unique structure and mechanism of action, has emerged as a key therapeutic agent against Gram-negative bacteria. The study aims to explore potential factors to influence its effectiveness and safety. METHODS: A Model-Based Meta-Analysis (MBMA) of 96 articles was conducted, focusing on factors like dosage, bacterial species, and combined antibiotic therapy. The analysis evaluated mortality rates and incidence rate of renal dysfunction, also employing parametric survival models to assess 30-day survival rates. RESULTS: In the study involving 96 articles and 9,716 patients, polymyxin B's daily dose showed minimal effect on overall mortality, with high-dose group mortality at 33.57% (95% CI: 29.15-38.00) compared to the low-dose group at 35.44% (95% CI: 28.99-41.88), p=0.64. Mortality significantly varied by bacterial species, with Pseudomonas aeruginosa infections at 58.50% (95% CI: 55.42-63.58). Monotherapy exhibited the highest mortality at 40.25% (95% CI: 34.75-45.76), p<0.01. Renal dysfunction was more common in high-dose patients at 29.75% (95% CI: 28.52-30.98), with no significant difference across antibiotic regimens, p=0.54. The 30-day Overall Survival rate for monotherapy therapy was 63.6% (95% CI: 59.3-67.5) and 70.2% (95% CI: 64.4-76.2) for association therapy with ß-lactam drugs. CONCLUSIONS: The dosage of Polymyxin B doesn't significantly change death rates, but its effectiveness varies based on the bacterial infection. Certain bacteria like Pseudomonas aeruginosa are associated with higher mortality. Combining Polymyxin B with other antibiotics, especially ß-lactam drugs, improves survival rates. Side effects depend on the dose, with lower doses being safer. These findings emphasize the importance of customizing treatment to balance effectiveness and safety.

[Ecological environment quality of the Shanxi section of the Yellow River Basin under different development scenarios]. / ä¸åŒå‘å±•æƒ æ™¯ä¸‹é»„æ²³æµåŸŸå±±è¥¿æ®µç”Ÿæ€çŽ¯å¢ƒè´¨é‡.

Shanxi Province holds an important strategic position in the overall ecological pattern of the Yellow River Basin. To investigate the changes of the ecological environment in the Shanxi section of the Yellow River Basin from 2000 to 2020, we selected MODIS remote sensing image data to determine the remote sensing ecological index (RSEI) based on the principal component analysis of greenness, humidity, dryness, and heat. Then, we analyzed the spatial and temporal variations of ecological quality in this region to explore the influencing factors. We further used the CA-Markov model to simulate and predict the ecological environment under different development scenarios in the Shanxi section of the Yellow River Basin in 2030. The results showed that RSEI had good applicability in the Shanxi section of the Yellow River Basin which could be used to monitor and evaluate the spatiotemporal variations in its ecological environment. From 2000 to 2020, the Shanxi section of the Yellow River Basin was dominated by low quality habitat areas, in which the ecological environment quality continued to improve from 2000 to 2010 and decreased from 2010 to 2020. The high quality habitat areas mainly located on the mountainous areas with superior natural conditions and rich biodiversity, while the low ecological quality areas were mainly in the Taiyuan Basin and the northern part of the study area, where the mining industry developed well. Climate factors were negatively correlated with ecological environment quality in the northern and central parts of the study area, and positively correlated with that in the mountainous area. Under all three development scenarios, the area of cultivated land, forest, water and construction land increased in 2030 compared to that in 2020. Compared to the natural development scenario and the cultivated land protection scenario, the ecological constraint scenario with RSEI as the limiting factor had the highest area of new forest and the lowest expansion rate of cultivated land and construction land. The results would provide a reference for land space planning and ecological environment protection in the Shanxi section of the Yellow River Basin.

In Situ Construction of a Multifunctional Interphase Enabling Continuous Capture of Unstable Lattice Oxygen Under Ultrahigh Voltages.

The use of nickel-rich layered materials as cathodes can boost the energy density of lithium batteries. However, developing a safe and long-term stable nickel-rich layered cathode is challenging primarily due to the release of lattice oxygen from the cathode during cycling, especially at high voltages, which will cause a series of adverse effects, leading to battery failure and thermal runaway. Surface coating is often considered effective in capturing active oxygen species; however, its process is rather complicated, and it is difficult to maintain intact on the cathode with large volume changes during cycling. Here, we propose an in situ construction of a multifunctional cathode/electrolyte interphase (CEI), which is easy to prepare, repairable, and, most importantly, capable of continuously capturing active oxygen species during the entire life span. This unique protective mechanism notably improves the cycling stability of Li||LiNi0.8Co0.1Mn0.1O2 (NCM811) cells at rigorous working conditions, including ultrahigh voltage (4.8 V), high temperature (60 °C), and fast charging (10 C). An industrial 1 A h graphite||NCM811 pouch cell achieved stable operation of 600 cycles with a capacity retention of 79.6% at 4.4 V, exhibiting great potential for practical use. This work provides insightful guidance for constructing a multifunctional CEI to bypass limitations associated with high-voltage operations of nickel-rich layered cathodes.

Toxin genotypes, antibiotic resistance and their correlations in Clostridioides difficile isolated from hospitals in Xi'an, China.

BACKGROUND: Clostridioides difficile is the main pathogen of antimicrobial-associated diarrhoea and health care facility-associated infectious diarrhoea. This study aimed to investigate the prevalence, toxin genotypes, and antibiotic resistance of C. difficile among hospitalized patients in Xi'an, China. RESULTS: We isolated and cultured 156 strains of C. difficile, representing 12.67% of the 1231 inpatient stool samples collected. Among the isolates, tcdA + B + strains were predominant, accounting for 78.2% (122/156), followed by 27 tcdA-B + strains (27/156, 17.3%) and 6 binary toxin gene-positive strains. The positive rates of three regulatory genes, tcdC, tcdR, and tcdE, were 89.1% (139/156), 96.8% (151/156), and 100%, respectively. All isolates were sensitive to metronidazole, and the resistance rates to clindamycin and cephalosporins were also high. Six strains were found to be resistant to vancomycin. CONCLUSION: Currently, the prevalence rate of C. difficile infection (CDI) in Xi'an is 12.67% (156/1231), with the major toxin genotype of the isolates being tcdA + tcdB + cdtA-/B-. Metronidazole and vancomycin were still effective drugs for the treatment of CDI, but we should pay attention to antibiotic management and epidemiological surveillance of CDI.

ABO and Rhesus blood groups and multiple health outcomes: an umbrella review of systematic reviews with meta-analyses of observational studies.

BACKGROUND: Numerous studies have been conducted to investigate the relationship between ABO and Rhesus (Rh) blood groups and various health outcomes. However, a comprehensive evaluation of the robustness of these associations is still lacking. METHODS: We searched PubMed, Web of Science, Embase, Scopus, Cochrane, and several regional databases from their inception until Feb 16, 2024, with the aim of identifying systematic reviews with meta-analyses of observational studies exploring associations between ABO and Rh blood groups and diverse health outcomes. For each association, we calculated the summary effect sizes, corresponding 95% confidence intervals, 95% prediction interval, heterogeneity, small-study effect, and evaluation of excess significance bias. The evidence was evaluated on a grading scale that ranged from convincing (Class I) to weak (Class IV). We assessed the certainty of evidence according to the Grading of Recommendations Assessment, Development, and Evaluation criteria (GRADE). We also evaluated the methodological quality of included studies using the A Measurement Tool to Assess Systematic Reviews (AMSTAR). AMSTAR contains 11 items, which were scored as high (8-11), moderate (4-7), and low (0-3) quality. We have gotten the registration for protocol on the PROSPERO database (CRD42023409547). RESULTS: The current umbrella review included 51 systematic reviews with meta-analysis articles with 270 associations. We re-calculated each association and found only one convincing evidence (Class I) for an association between blood group B and type 2 diabetes mellitus risk compared with the non-B blood group. It had a summary odds ratio of 1.28 (95% confidence interval: 1.17, 1.40), was supported by 6870 cases with small heterogeneity (I2 = 13%) and 95% prediction intervals excluding the null value, and without hints of small-study effects (P for Egger's test > 0.10, but the largest study effect was not more conservative than the summary effect size) or excess of significance (P < 0.10, but the value of observed less than expected). And the article was demonstrated with high methodological quality using AMSTAR (score = 9). According to AMSTAR, 18, 32, and 11 studies were categorized as high, moderate, and low quality, respectively. Nine statistically significant associations reached moderate quality based on GRADE. CONCLUSIONS: Our findings suggest a potential relationship between ABO and Rh blood groups and adverse health outcomes. Particularly the association between blood group B and type 2 diabetes mellitus risk.

Interferon-α stimulates DExH-box helicase 58 to prevent hepatocyte ferroptosis.

BACKGROUND: Liver ischemia/reperfusion (I/R) injury is usually caused by hepatic inflow occlusion during liver surgery, and is frequently observed during war wounds and trauma. Hepatocyte ferroptosis plays a critical role in liver I/R injury, however, it remains unclear whether this process is controlled or regulated by members of the DEAD/DExH-box helicase (DDX/DHX) family. METHODS: The expression of DDX/DHX family members during liver I/R injury was screened using transcriptome analysis. Hepatocyte-specific Dhx58 knockout mice were constructed, and a partial liver I/R operation was performed. Single-cell RNA sequencing (scRNA-seq) in the liver post I/R suggested enhanced ferroptosis by Dhx58hep-/-. The mRNAs and proteins associated with DExH-box helicase 58 (DHX58) were screened using RNA immunoprecipitation-sequencing (RIP-seq) and IP-mass spectrometry (IP-MS). RESULTS: Excessive production of reactive oxygen species (ROS) decreased the expression of the IFN-stimulated gene Dhx58 in hepatocytes and promoted hepatic ferroptosis, while treatment using IFN-α increased DHX58 expression and prevented ferroptosis during liver I/R injury. Mechanistically, DHX58 with RNA-binding activity constitutively associates with the mRNA of glutathione peroxidase 4 (GPX4), a central ferroptosis suppressor, and recruits the m6A reader YT521-B homology domain containing 2 (YTHDC2) to promote the translation of Gpx4 mRNA in an m6A-dependent manner, thus enhancing GPX4 protein levels and preventing hepatic ferroptosis. CONCLUSIONS: This study provides mechanistic evidence that IFN-α stimulates DHX58 to promote the translation of m6A-modified Gpx4 mRNA, suggesting the potential clinical application of IFN-α in the prevention of hepatic ferroptosis during liver I/R injury.

Transcriptome profiling of aerial and subterranean peanut pod development.

Peanut (Arachis hypogaea) showcases geocarpic behavior, transitioning from aerial flowering to subterranean seed development. We recently obtained an atavistic variant of this species, capable of producing aerial and subterranean pods on a single plant. Notably, although these pod types share similar vigor levels, they exhibit distinct differences in their physical aspects, such as pod size, color, and shell thickness. We constructed 63 RNA-sequencing datasets, comprising three biological replicates for each of 21 distinct tissues spanning six developmental stages for both pod types, providing a rich tapestry of the pod development process. This comprehensive analysis yielded an impressive 409.36 Gb of clean bases, facilitating the detection of 42,401 expressed genes. By comparing the transcriptomic data of the aerial and subterranean pods, we identified many differentially expressed genes (DEGs), highlighting their distinct developmental pathways. By providing a detailed workflow from the initial sampling to the final DEGs, this study serves as an important resource, paving the way for future research into peanut pod development and aiding transcriptome-based expression profiling and candidate gene identification.

Plant-LncPipe: a computational pipeline providing significant improvement in plant lncRNA identification.

Long non-coding RNAs (lncRNAs) play essential roles in various biological processes, such as chromatin remodeling, post-transcriptional regulation, and epigenetic modifications. Despite their critical functions in regulating plant growth, root development, and seed dormancy, the identification of plant lncRNAs remains a challenge due to the scarcity of specific and extensively tested identification methods. Most mainstream machine learning-based methods used for plant lncRNA identification were initially developed using human or other animal datasets, and their accuracy and effectiveness in predicting plant lncRNAs have not been fully evaluated or exploited. To overcome this limitation, we retrained several models, including CPAT, PLEK, and LncFinder, using plant datasets and compared their performance with mainstream lncRNA prediction tools such as CPC2, CNCI, RNAplonc, and LncADeep. Retraining these models significantly improved their performance, and two of the retrained models, LncFinder-plant and CPAT-plant, alongside their ensemble, emerged as the most suitable tools for plant lncRNA identification. This underscores the importance of model retraining in tackling the challenges associated with plant lncRNA identification. Finally, we developed a pipeline (Plant-LncPipe) that incorporates an ensemble of the two best-performing models and covers the entire data analysis process, including reads mapping, transcript assembly, lncRNA identification, classification, and origin, for the efficient identification of lncRNAs in plants. The pipeline, Plant-LncPipe, is available at: https://github.com/xuechantian/Plant-LncRNA-pipline.

Toward Direct Regeneration of Spent Lithium-Ion Batteries: A Next-Generation Recycling Method.

The popularity of portable electronic devices and electric vehicles has led to the drastically increasing consumption of lithium-ion batteries recently, raising concerns about the disposal and recycling of spent lithium-ion batteries. However, the recycling rate of lithium-ion batteries worldwide at present is extremely low. Many factors limit the promotion of the battery recycling rate: outdated recycling technology is the most critical one. Existing metallurgy-based recycling methods rely on continuous decomposition and extraction steps with high-temperature roasting/acid leaching processes and many chemical reagents. These methods are tedious with worse economic feasibility, and the recycling products are mostly alloys or salts, which can only be used as precursors. To simplify the process and improve the economic benefits, novel recycling methods are in urgent demand, and direct recycling/regeneration is therefore proposed as a next-generation method. Herein, a comprehensive review of the origin, current status, and prospect of direct recycling methods is provided. We have systematically analyzed current recycling methods and summarized their limitations, pointing out the necessity of developing direct recycling methods. A detailed analysis for discussions of the advantages, limitations, and obstacles is conducted. Guidance for future direct recycling methods toward large-scale industrialization as well as green and efficient recycling systems is also provided.

[Digital study on proximal clavicle anatomical plate based on 3D printing technology].

OBJECTIVE: To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate. METHODS: A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software. STL data were input into 3D printer to print 1:1 clavicle model and proximal clavicle anatomical plate. The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging. Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded. RESULTS: The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orientation of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good. Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively. CONCLUSION: The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Effect of Tb3+ and Ce3+ Co-doping on the Structure and Photoluminescence Properties of Hexagonal Boron Nitride Phosphors.

In the paper, we have successfully prepared hexagonal boron nitride (h-BN:Tb3+, Ce3+) phosphors with melamine as the nitrogen source. The X-ray powder diffraction patterns confirm that the sample possesses a hexagonal crystal structure within the P 6 ¯ m2 space group. It is interesting that the co-doping combination of Tb3+ and Ce3+ can markedly enhance the threshold concentration of doped activators within the limited solid solution of h-BN phosphors. Under 302 nm excitation, the h-BN:Ce3+ phosphors exhibit broadband blue light emission at 406 nm. In h-BN:Tb3+, Ce3+ phosphors, the co-doping of Ce3+ not only ensures high phase purity but also results in strong green light emission. The energy transfer efficiency from Ce3+ to Tb3+ is about 55%. The fluorescence lifetime increases with the increase of Ce3+ and Tb3+ concentration, and the fluorescence lifetime of h-BN:0.025Tb3+, 0.05Ce3+ phosphor reached 2.087 ms. Additionally, the h-BN:0.025Tb3+, 0.05Ce3+ phosphor exhibits excellent thermal performance with an activation energy value of 0.2825 eV. Moreover, the photoluminescence quantum yield of the sample exceeds 52%. Therefore, the h-BN:Tb3+, Ce3+ samples can be used as green phosphors for solid state lighting and fluorescent labeling.

Towards interpretable machine learning for observational quantification of soil heavy metal concentrations under environmental constraints.

Monitoring heavy metal concentrations in soils is central to assessing agricultural production safety. Satellite observations permit inferring concentrations from spectrum, thereby contributing to the prevention and control of soil heavy metal pollution. However, heavy metals exhibit weak spectral responses, particularly at low and medium concentrations, and are predominantly influenced by other soil components. Machine learning (ML)-driven modelling can produce predictions but lacks interpretability. Here, we present an interpretable ML framework for concentration quantification modelling and investigated the contributions of spectral and environmental factors-pH and organic carbon-to the estimation of metals with multiple concentration gradients, as analysed through SHAP (SHapley Additive exPlanations) data derived from four learning-based scenarios. The results indicated that scenarios SHC (spectral, pH, and organic carbon) and SH (spectral and pH) were the most optimal for chromium (Cr) [RPD = 1.42, Adj R2 = 0.62], and cadmium (Cd) [RPD = 1.80, Adj R2 = 0.80]. Under environmental constraints, the spectral predictability for Cr and Cd was improved by 67 % and 87 %, respectively. We concluded that interpretable modelling, utilising both spectral and soil environmental factors, holds significant potential for estimating heavy metals across concentration gradients. It is recommended that samples with higher organic carbon content and lower pH be selected to enhance Cr and Cd predictions. An advanced grasp of interpretable predictions facilitates earlier warning of heavy metal contamination and guides the formulation of robust sampling strategies.

Degradation Mechanisms of Electrodes Promotes Direct Regeneration of Spent Li-Ion Batteries: A Review.

The rapid growth of electric vehicle use is expected to cause a significant environmental problem in the next few years due to the large number of spent lithium-ion batteries (LIBs). Recycling spent LIBs will not only alleviate the environmental problems but also address the challenge of limited natural resources shortages. While several hydro- and pyrometallurgical processes are developed for recycling different components of spent batteries, direct regeneration presents clear environmental, and economic advantages. The principle of the direct regeneration approach is restoring the electrochemical performance by healing the defective structure of the spent materials. Thus, the development of direct regeneration technology largely depends on the formation mechanism of defects in spent LIBs. This review systematically details the degradation mechanisms and types of defects found in diverse cathode materials, graphite anodes, and current collectors during the battery's lifecycle. Building on this understanding, principles and methodologies for directly rejuvenating materials within spent LIBs are outlined. Also the main challenges and solutions for the large-scale direct regeneration of spent LIBs are proposed. Furthermore, this review aims to pave the way for the direct regeneration of materials in discarded lithium-ion batteries by offering a theoretical foundation and practical guidance.

N6-methyladenosine mRNA methylation positively regulated the response of poplar to salt stress.

As the most abundant form of methylation modification in messenger RNA (mRNA), the distribution of N6-methyladenosine (m6A) has been preliminarily revealed in herbaceous plants under salt stress, but its function and mechanism in woody plants were still unknown. Here, we showed that global m6A levels increased during poplar response to salt stress. Methylated RNA immunoprecipitation sequencing (MeRIP-seq) revealed that m6A significantly enriched in the coding sequence region and 3'-untranslated regions in poplar, by recognising the conserved motifs, AGACU, GGACA and UGUAG. A large number of differential m6A transcripts have been identified, and some have been proved involving in salt response and plant growth and development. Further combined analysis of MeRIP-seq and RNA-seq revealed that the m6A hypermethylated and enrich in the CDS region preferred to positively regulate expression abundance. Writer inhibitor, 3-deazaneplanocin A treatment increased the sensitivity of poplar to salt stress by reducing mRNA stability to regulate the expression of salt-responsive transcripts PagMYB48, PagGT2, PagNAC2, PagGPX8 and PagARF2. Furthermore, we verified that the methyltransferase PagFIP37 plays a positively role in the response of poplar to salt stress, overexpressed lines have stronger salt tolerance, while RNAi lines were more sensitive to salt, which relied on regulating mRNA stability in an m6A manner of salt-responsive transcripts PagMYB48, PagGT2, PagNAC2, PagGPX8 and PagARF2. Collectively, these results revealed the regulatory role of m6A methylation in poplar response to salt stress, and revealed the importance and mechanism of m6A methylation in the response of woody plants to salt stress for the first time.

Subtractive transformation of cathode materials in spent Li-ion batteries to a low-cobalt 5 V-class cathode material.

Adding extra raw materials for direct recycling or upcycling is prospective for battery recycling, but overlooks subtracting specific components beforehand can facilitate the recycling to a self-sufficient mode of sustainable production. Here, a subtractive transformation strategy of degraded LiNi0.5Co0.2Mn0.3O2 and LiMn2O4 to a 5 V-class disordered spinel LiNi0.5Mn1.5O4-like cathode material is proposed. Equal amounts of Co and Ni from degraded materials are selectively extracted, and the remaining transition metals are directly converted into Ni0.4Co0.1Mn1.5(CO3)2 precursor for preparing cathode material with in-situ Co doping. The cathode material with improved conductivity and bond strength delivers high-rate (10 C and 20 C) and high-temperature (60 °C) cycling stability. This strategy with no extra precursor input can be generalized to practical degraded black mass and reduces the dependence of current cathode production on rare elements, showing the potential of upcycling from the spent to a next-generation 5 V-class cathode material for the sustainable Li-ion battery industry.

High-quality genome assembly enables prediction of allele-specific gene expression in hybrid poplar.

Poplar (Populus) is a well-established model system for tree genomics and molecular breeding, and hybrid poplar is widely used in forest plantations. However, distinguishing its diploid homologous chromosomes is difficult, complicating advanced functional studies on specific alleles. In this study, we applied a trio-binning design and PacBio high-fidelity long-read sequencing to obtain haplotype-phased telomere-to-telomere genome assemblies for the 2 parents of the well-studied F1 hybrid "84K" (Populus alba × Populus tremula var. glandulosa). Almost all chromosomes, including the telomeres and centromeres, were completely assembled for each haplotype subgenome apart from 2 small gaps on one chromosome. By incorporating information from these haplotype assemblies and extensive RNA-seq data, we analyzed gene expression patterns between the 2 subgenomes and alleles. Transcription bias at the subgenome level was not uncovered, but extensive-expression differences were detected between alleles. We developed machine-learning (ML) models to predict allele-specific expression (ASE) with high accuracy and identified underlying genome features most highly influencing ASE. One of our models with 15 predictor variables achieved 77% accuracy on the training set and 74% accuracy on the testing set. ML models identified gene body CHG methylation, sequence divergence, and transposon occupancy both upstream and downstream of alleles as important factors for ASE. Our haplotype-phased genome assemblies and ML strategy highlight an avenue for functional studies in Populus and provide additional tools for studying ASE and heterosis in hybrids.

Electrocardiographic characteristics of bladder cancer patients receiving preoperative chemotherapy combined with immunotherapy.

OBJECTIVE: Patients treated with preoperative chemotherapy and immunotherapy for bladder cancer may be at increased risk of cardiotoxicity and electrophysiological abnormalities. This study aimed to analyze their electrocardiographic (ECG) alterations. METHODS: Patients with bladder cancer who were hospitalized and receiving tislelizumab plus nab-paclitaxel (TnP) were enrolled prospectively. ECG, cardiac biomarkers, and echocardiography were performed at baseline and the end of TnP. RESULTS: A total of 60 patients (76.7% males), including 30 muscle-invasive and 30 non-muscle-invasive bladder cancer, received three or four cycles of TnP, respectively. Hypertension was the commonest comorbidity (41.7%), and 25 patients (41.7%) were prescribed cardiovascular drugs. In comparison with baseline characteristics, cardiac troponin I (cTnI) and N-terminal pro-brain natriuretic peptide (NT-proBNP) were within normal ranges after TnP. However, echocardiographic parameter of left ventricular ejection fraction slightly decreased after TnP (62.81 ± 3.81% to 61.10 ± 4.37%, p = .011). The incidence of abnormal ECG increased from 65.0% at baseline to 76.7%, of which only a higher prevalence of fragmented QRS (fQRS) was observed (33.3% to 50.0%, p = .013; mainly in inferior leads). ECG parameters of QT dispersion (QTd) were prolonged significantly after the regimen (39.50 ± 11.37 to 44.20 ± 15.85 ms, p = .019). CONCLUSION: In bladder cancer patients receiving preoperative chemotherapy combined with immunotherapy, the main ECG abnormality was fQRS and QTd, with relatively normal cardiac biomarkers and echocardiographic parameters. Regular ECG screening should be carried out carefully to detect potential cardiotoxicity in the long-term follow-up.