Design of a Low-Frequency Dielectrophoresis-Based Arc Microfluidic Chip for Multigroup Cell Sorting.

Dielectrophoresis technology is applied to microfluidic chips to achieve microscopic control of cells. Currently, microfluidic chips based on dielectrophoresis have certain limitations in terms of cell sorting species, in order to explore a microfluidic chip with excellent performance and high versatility. In this paper, we designed a microfluidic chip that can be used for continuous cell sorting, with the structural design of a curved channel and curved double side electrodes. CM factors were calculated for eight human healthy blood cells and cancerous cells using the software MyDEP, the simulation of various blood cells sorting and the simulation of the joule heat effect of the microfluidic chip were completed using the software COMSOL Multiphysics. The effect of voltage and inlet flow velocity on the simulation results was discussed using the control variables method. We found feasible parameters from simulation results under different voltages and inlet flow velocities, and the feasibility of the design was verified from multiple perspectives by measuring cell movement trajectories, cell recovery rate and separation purity. This paper provides a universal method for cell, particle and even protein sorting.

Application and realization of Norland optical adhesive 73 novel photosensitive macromolecular material for the rapid preparation of periodically tunable nanoscale gratings.

Periodically tunable nano-gratings have an irreplaceable role in spectral scanning and optical communication, but the performance of gratings manufactured from different materials varies considerably, and the development of superior materials has energized the preparation of high-precision devices. This paper presents a nanoscale preparation process based on Norland Optical Adhesive 73 (NOA73), which enables the rapid preparation of periodically tunable nano-gratings with up to 100% light transmission. The powerful fluidity and shear rate of NOA73 make it uniquely suited to the preparation of precision devices, allowing the production of up to dense grating structures and offering the possibility of making nanoscale gratings. This paper uses multi-angle hierarchical lithography, die stretching, and replication to achieve further improvements in accuracy and successfully prepare gratings with a period of 500 nm. The successful preparation of NOA73 nano-gratings demonstrates the practicality of NOA73 as a material for precision device fabrication.

Oxidative stress facilitates infection of the unicellular alga Haematococcus pluvialis by the fungus Paraphysoderma sedebokerense.

BACKGROUND: The green microalga Haematococcus pluvialis is used as a cell factory for producing astaxanthin, the high-value carotenoid with multiple biological functions. However, H. pluvialis is prone to the infection by a parasitic fungus Paraphysoderma sedebokerense, which is the most devastating threat to the mass culture of H. pluvialis all over the world. Through dissecting the mechanisms underlying the infection process, effective measures could be developed to mitigate the pathogen threatening for the natural astaxanthin industry. By far, understanding about the interaction between the algal host and fungal pathogen remains very limited. RESULTS: We observed that there were heat-stable substances with small molecular weight produced during the infection process and enhanced the susceptibility of H. pluvialis cells to the pathogen. The infection ratio increased from 10.2% (for the algal cells treated with the BG11 medium as the control) to 52.9% (for the algal cells treated with supernatant contained such substances) on the second day post-infection, indicating the yet unknown substances in the supernatant stimulated the parasitism process. Systematic approaches including multi-omics, biochemical and imaging analysis were deployed to uncover the identity of the metabolites and the underlying mechanisms. Two metabolites, 3-hydroxyanthranilic acid and hordenine were identified and proved to stimulate the infection via driving oxidative stress to the algal cells. These metabolites generated hydroxyl radicals to disrupt the subcellular components of the algal cells and to make the algal cells more susceptible to the infection. Based on these findings, a biosafe and environment-friendly antioxidant butylated hydroxyanisole (BHA) was selected to inhibit the fungal infection, which completely abolished the infection at 12 ppm. By applying 7 ppm BHA every 2 days to the algal cell culture infected with P. sedebokerense in the 100 L open raceway ponds, the biomass of H. pluvialis reached 0.448 g/L, which was comparable to that of the control (0.473 g/L). CONCLUSIONS: This study provides for the first time, a framework to dissect the functions of secondary metabolites in the interaction between the unicellular alga H. pluvialis and its fungal parasite, indicating that oxidative degradation is a strategy used for the fungal infest. Eliminating the oxidative burst through adding antioxidant BHA could be an effective measure to reduce parasitic infection in H. pluvialis mass culture.

The influence of cultivation period on growth and biodiesel properties of microalga Nannochloropsis gaditana 1049.

This work reported for the first time the detailed impacts of cultivation period on growth dynamics and biochemical composition of a microalga strain Nannochloropsis gaditana 1049. The results shown either the biomass accumulation, lipid content, neutral lipid content, monounsaturated fatty acids composition or the favorable fatty acid profile of C16-C18 increased along with the cultivation period extension, but the lipid productivity displayed a decrease since cultured for 16 days, with the highest value reached 289.51 ± 16.34 mg L(-1) d(-1). Biodiesel properties of this microalga also changed with the cultivation period extension, with average unsaturated degree decreased from 1.24 ± 0.03 to 0.59 ± 0.02, cloud point increased from 3.39 ± 0.40 °C to 12.14 ± 0.32 °C, cetane number increased from 54.59 ± 0.20 to 58.96 ± 0.16 and iodine number reduced sharply from 105.15 ± 2.24 gI2/100g to 56.44 ± 1.76 gI2/100g, which all satisfied the specifications of biodiesel standard.

Bacterioplanes sanyensis gen. nov., sp. nov., a PHB-accumulating bacterium isolated from a pool of Spirulina platensis cultivation.

A Gram-negative, poly-3-hydroxybutyrate-accumulating rod bacterium, strain GYP-2(T), was isolated from a pool of marine Spirulina platensis cultivation, Sanya, China. Growth was observed at 10-45 °C and pH 6-10 in the presence of 1-10 % (w/v) NaCl. Phylogenetic analysis based on 16S rRNA gene sequences indicated that the new isolate belonged to Gammaproteobacteria and displayed 93.8-95.3 % 16S rRNA gene sequences similarities to members of the genera Thalassolituus, Oleibacter, and Oceanobacter, but house-keeping gene gyrB (encode DNA gyrase beta subunit) demonstrated that the new isolate was distantly related to Thalassolituus, Oleibacter, and Oceanobacter species (only 77-83 % gene gyrB sequences similarities).The G+C content of genomic DNA was 55 mol%. The major respiratory quinone was Q-9, while that for Oceanobacter kriegii LMG 6238(T) was Q-8. Major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, and phosphatidylethanolamine. On the basis of its physiological, chemotaxonomic, and molecular properties, strain GYP-2(T) is suggested to represent a novel species of a new genus in Gammaproteobacteria, for which the name Bacterioplanes sanyensis gen. nov., sp. nov. is proposed. The type strain is GYP-2(T) (=CGMCC 1.12392(T)=KCTC 32220(T)).