[Development of a Laser On-Line Cement Raw Material Analysis Equipment].

In engineering construction, cement quality directly affects the safety of construction projects. So it is necessary that we use qualified cement in the engineering structure. It is of great signification that a method detects cement raw material rapidly to adjust the mixture ratio of raw ores to ensure the cement quality. Traditional detection method needs sampling, sample preparation and test, etc. With many procedures, the test results are seriously lagged behind the production process. This paper introduces a set of online analysis equipment to determinate elemental composition of cement powder timely based on laser induced breakdown spectroscopy. This equipment is composed of a LIBS detection system and a pneumatic system. The equipment can achieve the real-time measurement for it needn't sample preparation. Thus, it can guide cement raw material proportioning in time. In this paper, we have quantitatively analyzed the main components of Al2O3, CaO, Fe2O3, MgO and SiO2 in the cement raw materials using the full spectrum normalization method as well as the support vector machine. The corresponding maximum absolute errors were 0.34%, 0.35%, 0.07%, 0.14%, and 0.55%, respectively. Results showed that the measurement results of the newly developed LIBS equipment are in accord with those of the conventional chemical method. Furthermore, the measurement precision is in line with X-Ray fluorescence spectrometry. It is confirmed that the LIBS technique could be a prospect method for determination of elemental composition in the cement production industries.

Experimental quantum secure direct communication with single photons.

Quantum secure direct communication is an important mode of quantum communication in which secret messages are securely communicated directly over a quantum channel. Quantum secure direct communication is also a basic cryptographic primitive for constructing other quantum communication tasks, such as quantum authentication and quantum dialog. Here, we report the first experimental demonstration of quantum secure direct communication based on the DL04 protocol and equipped with single-photon frequency coding that explicitly demonstrated block transmission. In our experiment, we provided 16 different frequency channels, equivalent to a nibble of four-bit binary numbers for direct information transmission. The experiment firmly demonstrated the feasibility of quantum secure direct communication in the presence of noise and loss.

[High-Sensitive Carbon Dioxide Detection Using Quartz-Enhanced Photoacoustic Spectroscopy with a 2.0 µm Distributed Feedback Laser].

A carbon dioxide (CO2) sensor is developed using quartz enhanced photoacoustic spectroscopy (QEPAS) with a 2.0 µm distributed feedback diode laser. The detection is based on a 2f wavelength-modulation spectroscopy approach by dithering and scanning the laser current. The laser modulation depth is optimized at normal atmosphere pressure and room temperature. The influence of the H2O presence in the sample gas mixture on the CO2 sensor performance is also investigated. The results show that, with 1% CO2 concentration, the H2O in the concentration ranges of 0 to 0.2% has an effect on the CO2 signal amplitude and phase, and the largest amplitude difference is ~2.1 times. When the H2O concentration is over 0.2%, the CO2 signal amplitude is saturated and remains steady. Atmospheric CO2 concentration is well measured using the optimal sensor parameters. Benefiting from the strong absorption line intensity at 4989.97 cm(-1), a detection limit of 19 ppm (1σ, 300 ms averaging time) is achieved, which corresponds to a normalized noise equivalent absorption coefficient of 4.71 × 10(-9) cm(-1) · W · Hz(-1/2).

[Research on locking of the output power of pulsed laser in laser-induced breakdown spectroscopy].

Laser-induced breakdown spectroscopy (LIBS) as a rapid spectral analysis technology shows the outstanding application foreground and research value in coal quality on-line monitoring. In the practical application of this technology, the pulsed laser power fluctuation leads to the worse performance of long term stability, so a closed-loop feedback pulsed laser power locking device is set up, using laser power feedback signal to control and lock Nd:YAG laser output power. The laser power locking experiments are investigated in the same pre-set value with different splitting ratios, the different laser output power with the same proportion and the long time running modes. The results show that the beam split ration has little impact to the stability of the laser power, and the smaller split ration leads to the faster stabilization. This device can keep the output power of the pulsed laser being locked in the pre-set range for a long-term running, RSD values decrease from 2.4% of free-running to 1.1%.

[Experimental investigations of cavity ring-down spectroscopy under different threshold circuit design].

In the present paper, the authors simply describe the principle of cavity ring-down spectroscopy (CRDS) measurement technology and introduce a threshold circuit, based on 555 timer IC (integrated circuit), applied to CRDS. And we verify the feasibility of the circuit. By means of changing the input resistor and input capacity, we analyzee the influence of threshold circuit characteristics on single ring-down event, and found that the greater the input capacitance, and the smaller the input impedance of circuit, the more serious the distortion of measurement of ring-down curve, especially when the resistance is less than 50 omega the ring-down time produces very big change. Then we collected and analyzed the C2H2 absorption signal at 6 531.7805 cm(-1) with different input resistance and input capacitance, and fitted the absorption line with Voigt profile. We found that the change of the input capacitance and resistance caused the distortion of fitting curve. Finally We give the optimal design of threshold circuit: the input impedance of the threshold circuit should be great, minimum of 100 omega, the capacitive reactance should be as small as possible, preferably below 1 nf, at the same time it should be ensured that the threshold of the circuit time constant is much smaller than ring-down time. The experiment research on CRDS technique application has important reference value to threshold circuit design.

[Theoretical analysis of saturated spectral line shape of noise immune cavity enhanced optical heterodyne molecular spectroscopy].

In the present paper a theoretical description of the line shapes of frequency modulated noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) under saturated conditions is presented. Expressions for both Doppler broadened and Doppler free frequency modulated NICE-OHMS signals at their absorption and dispersion phases are given. The modulation frequency, saturation parameter and frequency modulation index are set to 384 MHz, 10 and 0.2, respectively in the simulation. Based on the simulated line shape curves, in the absorption detection phase there are four sub Doppler structures existing in the spectral envelope of absorption signals of two sidebands, and in the dispersion phase there are five sub-Doppler structures existing in the spectral envelope of dispersion signals of carrier and two sidebands. The sub-Doppler structure originates from the fact that two counter propagating waves interact with the same group of molecules and one can act as a detecting beam and the other can act as a pumping beam. Therefore the sub-Doppler structure can appear at laser carrier and sidebands frequency and their middle frequencies of carrier and sidebands. Since NICE-OHMS absorption signal is only related to the absorption of sidebands the small saturation parameters of two sidebands can not saturate the Doppler broadened signal too much Although the NICE-OHMS dispersion signal includes the dispersion of carrier and two sidebands, the amplitude of Doppler broadened signal does not have so much influence by saturation except for the Doppler free signal. Therefore NICE-OHMS technique is a good candidate for the high sensitive detection of gas medium but with high selectivity under the condition of low pressure. Finally the dependences of NICE-OHMS line shape on the detection phase and saturation parameter are simulated and analyzed, the results of which nicely agree with the existing experimental results. The researches on NICE-OHMS line shapes will help explain the phenomena of related experiment.

[The research on residual amplitude modulation characteristics in fiber frequency modulation spectroscopy].

Frequency modulation spectroscopy (FMS) not only can be used to simultaneously measure the absorption and dispersion of atoms and molecules, but is the key technology of the noise immunity cavity enhanced optical heterodyne molecular spectroscopy (NICE-OHMS). The optical devices or the instability of output light polarization of the laser source will induce the residual amplitude modulation (RAM) in the FMS. RAM greatly limits the FMS technology application in trace gas detection, so the research on the RAM characteristics in the FMS has very important significance. Firstly, the lineshape of FMS without absorption was analyzed, and the impact factors on the RAM were acquired, then the influence of input and output polarization direction and electro-optical modulation (EOM) temperature was measured, respectively. They all have linear relationship with the RAM. The results verify the theoretical analysis and provide the basis for reducing the RAM and other related working.

Application of sub-Doppler DAVLL to laser frequency stabilization in atomic cesium.

We achieve laser frequency stabilization by a simple technique based on sub-Doppler dichroic atomic vapor laser lock (DAVLL) in atomic cesium. The technique that combines saturated-absorption spectroscopy and Zeeman splitting of hyperfine structures allows us to obtain a modulation-free dispersion-like error signal for frequency stabilization. For the error signal, the dependence of peak-to-peak amplitude and the slope at the zero-crossing point on the magnetic field is studied by simulation and experiment. Based on the result, we obtain an available sub-Doppler DAVLL error signal with high sensitivity to the frequency drift by selecting an appropriate strength of the magnetic field. Ultimately, the fluctuation of the locked laser frequency is confined to below 0.5 MHz in a long term, exhibiting efficient suppression of frequency noise.

[Theoretical analysis of the residual amplitude modulation of frequency modulation strong absorption spectroscopy].

In the present paper a phase controllable waveplate model was applied to the analysis of polarization maintaining fiber. Under the temperatures of 24 degrees C and 26.8 degrees C there is no residual amplitude modulation (RAM) existing in frequency modulation spectroscopy (FMS) when performing the measurement of fiber temperature dependence on the RAM. However, the temperature setting can not reduce the background long term drift and a servo feedback suggested by N. C. Wong and J. L. Hall can be used to actively reduce the RAM. The error signal for feedback is from the dispersion background signal of FMS without gas sample. The variation of RAM induced by the temperature changing of PM fiber is the main reason for the long term background drift of dispersion signal of FMS.

[Research on the identification method of LTE condition in the laser-induced plasma].

Because of the poor accuracy of the commonly used Boltzmann plot method and double-line method, the Boltzmann-Maxwell distribution combined with the Saha-Eggert formula is proposed to improve the measurement accuracy of the plasma temperature; the simple algorithm for determining the linewidth of the emission line was established according to the relationship between the area and the peak value of the Gaussian formula, and the plasma electron density was calculated through the Stark broadening of the spectral lines; the method for identifying the plasma local thermal equilibrium (LTE) condition was established based on the McWhirter criterion. The experimental results show that with the increase in laser energy, the plasma temperature and electron density increase linearly; when the laser energy changes within 127~510 mJ, the plasma electron density changes in the range of 1.30532X10(17)~1.87322X10(17) cm(-3), the plasma temperature changes in the range of 12586~12957 K, and all the plasma generated in this experiment meets the LTE condition threshold according to the McWhirter criterion. For element Al, there exist relatively few observable lines at the same ionization state in the spectral region of the spectrometer, thus it is unable to use the Boltzmann plane method to calculate temperature. One hundred sets of Al plasma spectra were used for temperature measurement by employing the Saha-Boltzmann method and the relative standard deviation (RSD) value is 0.4%, and compared with 1.3% of the double line method, the accuracy has been substantially increased. The methods proposed can be used for rapid plasma temperature and electron density calculation, the LTE condition identification, and are valuable in studies such as free calibration, spectral effectiveness analysis, spectral temperature correction, the best collection location determination, LTE condition distribution in plasma, and so on.

[Experimental study of ultralow frequency modulation photoassociation spectrum].

In the present paper, ultracold cesium atoms were obtained in magnetic optical trap using the laser cooling technology. The number of ultracold atoms is 10(7). The temperature of ultracold atoms is about 200 µK and the diameter of the ultracold atoms cloud is about 400 µm. The ultracold cesium molecules of excited states were formed using the photoassociation of ultracold atoms. The resolution of vib-rotational spectrum was studied under different scan rates of photossociation laser in the experiment. The resolution of vib-rotational spectrum becomes high when the scan rate of photossociation laser becomes slow. The cold atoms fluorescence was obtained using the high sensitive avalanche photo detector and the high resolution vib-rotational spectrum of ultracold cesium molecule in its first excited state of with dissociation limit long range state was obtained. The ultracold ground molecule was formed by controlled Raman photoassociation and the photoassociation laser must be locked to atom-molecular hyperfine transitions. The ultracold atoms photoassociation spectrum was modulated using ultra-low frequency. The first-order differential signal was optimized by changing modulation amplitude and modulation frequency. It provides a feedback signal to correct error of the laser. The laser frequency satisfies experimental requirement to form ultracold ground molecules using the controlled Raman photoassociation. This work is important for studies of ultracold atoms and molecules in confined space.

Simple, reliable, and nondestructive method for the measurement of vacuum pressure without specialized equipment.

We present a simple, reliable, and nondestructive method for the measurement of vacuum pressure in a magneto-optical trap. The vacuum pressure is verified to be proportional to the collision rate constant between cold atoms and the background gas with a coefficient k, which can be calculated by means of the simple ideal gas law. The rate constant for loss due to collisions with all background gases can be derived from the total collision loss rate by a series of loading curves of cold atoms under different trapping laser intensities. The presented method is also applicable for other cold atomic systems and meets the miniaturization requirement of commercial applications.

[Experimental research on optimization of QEPAS based spectrophone].

The present paper studied the impact of geometry dimensions, located angle and detection position of a quartz tuning fork (QTF) on the sensitivity of QEPAS system. Ten kinds of QTFs were employed to compare the sensitivity with each other, and the results show that the QTF with a wedge-shape top obtains a higher quality factor and turns to be 50% more sensitive than the ones with a regular cuboid top when detecting the water concentration at 7 306 cm-1. By studying the located angle of a QTF, it was found that it nearly makes no difference, but more noise is introduced when there is an angle phi between the laser beam and QTF. The optimal detection position of a QTF appears to be 3. 1 cm away from the bottom of the QTF under the case of the normal incidence. At last the influence of external contamination on the resonant frequency of a QTF is discussed. The authors found that the frequency of the QTF decreases along with the contamination increasing. A novel method to lower the frequency of the QTF is proposed. This may make a contribution to the QEPAS used in detecting trace gas with a low V-T relaxation.

[Research on the carbon content of coal by LIBS].

A method is introduced about quantitative analysis of carbon in coal by LIBS (laser-induced breakdown spectroscopy) in the present paper, and it introduces data optimization technology and method based on spectral data integration, normalization and data screening processing to overcome the poor quality of precision in the analysis because of laser source energy fluctuation, self-absorption, sample surface roughness etc. It is showed that the standard deviation (SD) is less than 1.6% using the method to analyze C element content in coal, and this method also can be used for other element analysis for coal.

[Analysis of software for identifying spectral line of laser-induced breakdown spectroscopy based on LabVIEW].

Self-designed identifying software for LIBS spectral line was introduced. Being integrated with LabVIEW, the soft ware can smooth spectral lines and pick peaks. The second difference and threshold methods were employed. Characteristic spectrum of several elements matches the NIST database, and realizes automatic spectral line identification and qualitative analysis of the basic composition of sample. This software can analyze spectrum handily and rapidly. It will be a useful tool for LIBS.

[Research on accurate measurement of oxygen content in coal using laser-induced breakdown spectroscopy in air environment].

A technique about accurate measurement of oxygen content in coal in air environment using laser-induced breakdown spectroscopy (LIBS) is introduced in the present paper. Coal samples were excited by the laser, and plasma spectra were obtained. Combining internal standard method, temperature correction method and multi-line methods, the oxygen content of coal samples was precisely measured. The measurement precision is not less than 1.37% for oxygen content in coal analysis, so is satisfied for the requirement of coal-fired power plants in coal analysis. This method can be used in surveying, environmental protection, medicine, materials, archaeological and food safety, biochemical and metallurgy application.

[Research on parameters optimization of laser-induced breakdown spectroscopy based experimental device].

For a better application of laser-induced breakdown spectroscopy (LIBS) to coal quality analysis, it is necessary to optimize the key parameters of the experimental LIBS-based device. The relationships between the key parameters and the signal-to-noise ratios (S/N) of the elemental emission lines in the plasma spectrum of the pulverized coal were studied, according to which the optimal parameters can be selected. Experimental results indicate that the optimal settings for our LIBS-based device are laser pulse energy = 120 mJ x Pulse(-1), delay time of spectrometer = 200 ns, laser focal point be located 3-5 mm underneath the sample surface, rotation speed of sample cell = 2.7 rev x min(-1), a narrow-band filter with center frequency of 1 064 nm and a diaphragm with center hole diameter of 1.5 mm be placed in the path of the laser beam. Quantitative analysis results of pulverized coal show that, by using the optimal LIBS-based device, the standard deviation (SD) of C has been reduced from 6.7% to 1.6%, while the relative standard deviation (RSD) of other trace elements has been reduced from 28% to 10%. As a result, th accuracy has been improved greatly.

[Experimental study on harmonic detection of methane by use of a digital lock-in amplifier].

The harmonic detection of methane at 6105.3694 cm(-1) was measured by use of a digital lock-in amplifier (SR830) remotely controlled by a computer. The programme was written by Visual Basic 6.0 because it has strong function and a friendly appearance. The experimental results are in agreement with theoretical analysis, which fully confirms that a better signal-to-noise ratio (SNR) can be achieved in the high-harmonics detection of trace gases by the digital lock-in amplifier. The method can be applicable to the highly sensitive detection of pollution gases.

[Analysis of gas absorption coefficient at various pressures].

The absorption coefficient alpha(v) of gas plays an important role in quantitative analysis of pollution gases and theoretical investigation of molecular parameter. In this paper we first analyze alpha(v) theoretically and present a calculation method. Then we analyze 2v3 band R3 manifold of pure CH4 and draw a conclusion that alpha(v0) decreases and the peak absorption kappa(v0) increases with increasing the pressure. When the pressure is <0.03 and >2 atm, we can calculate alpha(v0) using the Gaussian profile and Lorentzian profile respectively, and then analyze the relative error. Finally we analyze the peak absorption kappa(v0) at various pressures, then define the high-resolution area and high-sensitive area respectively when the pressure is <0.01 and >1 atm.