[Effects of Polystyrene Microplastics Combined with Cadmium Contamination on Soil Physicochemical Properties and Physiological Ecology of Lactuca sativa].

Contaminants such as microplastics (MPs) and heavy metals are commonly found in soils, both of which are extremely difficult to degrade and can easily form compound contamination, altering the physicochemical properties of the soil and thus potentially changing the growth and physiological and ecological characteristics of plants. In order to study the effects of the combined contamination of soil MPs and heavy metals on soil properties and plant growth, polystyrene microplastics (PS-MPs) with a particle size of 3 µm and the heavy metal cadmium were selected in the study. The changes in the physicochemical properties of soil and their effects on lettuce (Lactuca sativa) seed germination and seedling growth were studied at various exposure concentrations of PS-MPs (0, 10, 50, 100, 200, and 400 mg·kg-1) and combined with different Cd contamination concentrations (0, 1.2, and 6.0 mg·kg-1), respectively. The results showed that soil organic matter (SOM), available phosphorus (AP), alkali-hydrolysable nitrogen (AHN), and available kalium (AK) showed significant decreases as the intensity of PS-MPs combined with Cd contamination increased. Simultaneously, PS-MPs combined with Cd contamination also significantly reduced the germination rate of lettuce seeds, but low concentrations of PS-MPs slowed down the effect of Cd (6.0 mg·kg-1) contamination on lettuce seeds, and high concentrations of PS-MPs enhanced the effect of Cd (6.0 mg·kg-1). The fresh weight, dry weight, and plant height of lettuce seedlings showed an increasing and then decreasing trend with increasing exposure to PS-MPs. Chlorophyll content, superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) showed a decreasing trend, whereas malondialdehyde (MDA) content showed an overall increasing trend under different Cd concentrations. The main physicochemical indicators of the soil were negatively correlated with MDA of lettuce seedlings, whereas other indicators of the seedlings were positively correlated. The combined contamination of PS-MPs and Cd could affect the germination of plant seeds and the physiological and ecological characteristics of seedlings by changing the physicochemical properties of the soil. Both exposure to single PS-MPs contaminants and the combination of PS-MPs with Cd inhibited the germination of lettuce seeds and affected the physiological activities of their seedlings, and the inhibition was significantly increased with increasing exposure. Low exposure to PS-MPs or the combination of PS-MPs with Cd contamination exhibited a promotive effect on lettuce seedling growth. High exposure to PS-MPs combined with Cd contamination exhibited significant ecological effects on lettuce seedlings, and high exposure to PS-MPs exacerbated the ecotoxicological effects of Cd contaminants on lettuce seedlings, and PS-MPs and Cd exhibited synergistic effects. The results can provide some reference for assessing the ecological effects of MPs and heavy metal pollution in soil-plant systems.

[Distribution Characteristics of Microplastic Surface Bacterial Communities Under Flooded and Non-flooded Conditions in Nanjishan Wetland of Poyang Lake].

Plastic particles smaller than 5 mm in size are known as microplastics which are widespread in the environment and can cause several negative effects. Moreover, only a few studies have focused on the relationship between microplastics and microbes in the natural wetland ecosystem. In this study, microplastics were collected from sediment, water, and sediment flooded and non-flooded conditions in the lake wetland of Poyang Lake as the study area. The structural distribution of bacterial community on sediment, water, and microplastics were analyzed using 16S high-throughput sequencing. The results of the α-diversity analysis showed that the bacterial abundance and diversity on the surface of microplastics were significantly different from those in the environment and were lower than those in the surrounding environment in both flooded and non-flooded conditions. The results of the principal co-ordinates analysis indicated that the bacterial community on the surface of microplastics was more influenced by the sediment in non-flooded conditions and by the water in flooded conditions. The structure of the bacterial community on the microplastic surface also showed significant differences from the surrounding environment, with the sediment mainly consisting of several other bacterial genera with <1% abundance, whereas the bacterial community on the microplastics had clearly dominant species. The relative abundance of Proteobacteria on the microplastic surfaces increased significantly in the non-flooded condition compared to that in the water and sediment samples, whereas the relative abundance of Bacteroidota on the microplastic surface increased in the flooded condition. The genus Flavobacterium, Massilia, and Pseudomonas were the most abundant in the non-flooded state, and the genus Flavobacterium was the most abundant in the flooded state. In this study, Pseudomonas spp. was the focus of future research on plastic biodegradation. This study can further improve the understanding of microplastic pollution in wetland ecosystems and provide a theoretical basis for lake environmental management.

[Spatiotemporal distribution and multi-source characteristics of microplastics in the soil and water environment of Poyang Lake Wetland, China]. / 鄱阳湖湿地水土环境中微塑料的时空分布及多源性.

The increasing microplastics (MPs) pollution in freshwater wetlands has received global concerns. To investigate the spatiotemporal dynamics of MPs in the wetlands of Poyang Lake, surface water and sediment samples were collected from five rivers entering the lake as well as the confluence of Poyang Lake into the Yangtze River, in both dry and wet seasons. The MPs in water and sediment were extracted by the digestion-filtration method and flotation-separation-digestion-filtration method, respectively. Light microscope, Fourier transform infrared spectroscopy, and scanning electron microscope were used for microplastic characterization. The results showed that the abundance of MPs ranged from 32.1 to 127.3 n·L-1 in water samples, and from 533.3 to 1286.6 n·kg-1 in sediment samples during the wet season. In the dry season, the abundance of MPs ranged from 87.1 to 295.5 n·L-1 in water and from 460.0 to 1368.0 n·kg-1 in sediment. Compared with other freshwater wetlands, Poyang Lake had higher abundance of MPs. There were temporal and spatial differences among regions. The main forms of MPs included beads, fragment, film and fiber, and the corresponding polymer components were mainly polystyrene, polypropy-lene and polyethylene. Beads (35.7% in wet season and 52.0% in dry season) were the main form of MPs in water, while fragment (45.8% in wet season and 69.7% in dry season) was the main form of MPs in sediment. Small size (<0.1 mm) MPs were dominant (>50%) in water and sediment in both seasons. The abundance of MPs with different sizes decreased with the increases of size. The potential main sources of MPs in the wetlands of Poyang Lake included the discharge of industrial wastewater, discharge from urban and rural domestic sewage treatment plants, agricultural and fishing activities, and improper disposal of domestic wastes.

[Effects of electron acceptor and light on the abundance of microbial function gene related to soil CH4 emission]. / ç”µå­å—ä½“å’Œå ‰ç §å¯¹åœŸå£¤CH4æŽ’æ”¾ç›¸å ³å¾®ç”Ÿç‰©åŠŸèƒ½åŸºå› ä¸°åº¦çš„å½±å“.

To explore the effects of different electron acceptors on soil methane emission and responses of soil microorganisms to different light conditions, a strict anaerobic 20-day incubation experiment was conducted with eight treatments: darkness + Fe3+ (DF); darkness + NO3- (DN); darkness +SO42- (DS); darkness + distilled water (DCK); light + Fe3+ (LF); light + NO3- (LN); light +SO42- (LS); light + distilled water (LCK). The changes of methane concentration in the anaerobic incubation flask and the variation of the abundance of bacteria, archaea, fungi and six soil functional genes were analyzed. Results showed that soil methane emission under NO3-, SO42- addition and control (CK) was significantly lower under light conditions than dark, except the Fe3+ treatment. DN, DCK and LF treatments had the highest abundance of bacteria, fungi and archaea genes, respectively. The gene abundance of methanogenic mcrA, sulfate-reducing bacteria Dsr, and carbon-fixing CbbL were significantly up-regulated in the LF, while that of methanotrophs pmoA, iron-reducing bacteria Geo, and denitrifying bacteria nosZ were significantly up-regulated in the LN, DCK and LCK, respectively. Results of Pearson correlation and RDA analysis showed that CH4 emission was significantly positively correlated with CO2 concentration, pH, ammonium-nitrogen, and total N contents, and negatively correlated with N2O concentration, Eh, nitrate, and total C contents. Under dark condition, methane emission was positively correlated with archaea and pmoA genes abundance, and negatively correlated with other genes abundance. Under light condition, methane emission was negatively correlated with the abundance of soil microbe and functional genes. In general, methane emission under light condition was significantly lower than that under dark condition (except for the Fe3+ treatment). These results showed that it was helpful to reduce methane emission under light condition, but the increase or decrease of methane emission was closely related to the type of electron acceptors and the functional responses of soil micro-organisms.

[Microbial Community Structure on Microplastic Surface in the Grus leucogeranus Reserve of Poyang Lake].

As a new type of pollutant, microplastics have attracted increasing attention. Microplastics in aquatic ecosystems are accumulating at an unprecedented scale, causing significant environmental and economic impacts. In this study, sediments and different types of microplastic samples were collected from the Grus leucogeranus Reserve of Wuxing Reclamation Farm of Poyang Lake, which is the largest freshwater lake in China. The main types of microplastics were film (PE), debris (PP1), fiber (PP2), and foam (PS), and the polymers were identified as polyethylene, polypropylene, and polystyrene in the study area. The structures of microbial communities (fungi and bacteria) were identified using 16S high-throughput sequencing. The results showed that there was no significant difference in the Ace and Chao of bacteria between the surface of PE and PP1 and that of the surrounding sediments (P>0.05), whereas PP2 and PS were significantly lower than those in surrounding sediments (P<0.05). Ace and Chao of fungi showed that PE and PS had no significant differences with the sediment (P>0.05), and PP1 and PP2 were significantly lower than those in surrounding sediments (P<0.05). The species diversity Shannon and Simpson index of bacteria and fungi on different types of microplastic surfaces were lower than that of sediment. The bacterial communities on the sediment and microplastic surface mainly included Proteobacteria and Bacteroidetes. In the fungal community, Basidiomycota, Ascomycota, and Chytridiomycota were the dominant bacteria. Through KEGG functional prediction, it was found that most of the metabolic pathways with a significant difference between bacteria and sediments on the surface of microplastics and with an abundance ratio higher than 1% were related to metabolism. Compared with that of sediment, the metabolic pathways of PE and PP2 on microplastic surfaces were down-regulated mainly in cell motility, signal transduction, and carbohydrate metabolism, whereas the energy metabolism, general and global metabolism pathways, and cofactor metabolism were up-regulated. Compared with that of sediment, the bacterial metabolic pathways of PS and PP1 on microplastic surfaces were down-regulated, mainly including general and global metabolic pathways, translation, and exogenous biodegradation, and cell motility and signal transduction were up-regulated. However, the abundance of other functional genes in sediments and microplastic samples showed little difference. The results indicated that microplastics can change the structure of microbial communities, and the microbial community on the surface of microplastics could catalyze metabolic reactions and promote the decomposition of microplastics. The study of microplastic surface microbial structure in Poyang Lake can support management decisions to protect the ecological integrity of the lake.

[Effects of polystyrene microplastics (PS-MPs) on the growth, physiology, and biochemical characteristics of Hydrilla verticillata]. / 聚苯乙烯微塑料对黑藻生长及生理生化特征的影响.

In order to evaluate the effects of polystyrene microplastics (PS-MPs) on the growth, physiology, and biochemical characteristics of submerged plants, we exposed a typical submerged plant, Hydrilla verticillata, to a series of concentrations (i.e. 0, 5, 10, 30, 50, 100 mg·L-1) of 3 µm polystyrene microplastics (PS-MPs) and measured parameters including height, biomass, chlorophyll content, antioxidant enzyme activity, photosynthetic fluorescence. The results showed that the height of H. Verticillata significantly decreased at the high PS-MP concentrations (50 to 100 mg·L-1), while the fresh weight significantly increased at the low PS-MP concentration (5 mg·L-1). The fresh weight of H. verticillata gradually decreased with the increasing PS-MP concentration but the dry weight did not change. The total amount of chlorophyll, chlorophyll a, and chlorophyll a/b significantly decreased with the increases of the PS-MP concentrations, while the chlorophyll b did not change. PS-MPs affected the antioxidant enzyme activities of H. verticillata. The activities of superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) were first increased and then decreased with the increasing PS-MP concentration. The chlorophyll fluorescence parameters (Fo, Fm, Fv/Fm) decreased with the increasing concentration of PS-MP and the 1-Qp-Lss value (reflective of the closing of PSⅡ reaction center) was increased under the stable state, probably due to the inhibited PSⅡ reaction center. The overall intensity of fluorescence imaging of H. verticillata decreased with the increasing concentration of PS-MPs. When the PS-MP concentration was lower than 10 mg·L-1, the photosynthetic activity of the leaves was normal. In contrast, when the PS-MP concentration was higher than 30 mg·L-1, it caused significant adverse effects on leaves, including weaker photosynthetic intensity and the presence of yellow or withered leaves. Our results suggested that H. verticillata could tolerate PS-MP pollution but its growth and photosynthesis would be inhibited at high concentrations (>30 mg·L-1). Our results provided basic information to better understand the eco-physiological effects of PS-MPs in the freshwater environment.

[Occurrence Relationship Between Microplastics and Heavy Metals Pollutants in the Estuarine Sediments of Poyang Lake and the Yangtze River].

Heavy metals are typical pollutants in the environment and microplastics are relatively newly recognized environmental pollutants, with their coexistence potentially compounding pollution and ecological risks. In this study, we investigate the contents and morphological characteristics of microplastics and heavy metals (Cu, Cd, Pb, Zn, and Cr) in the estuarine sediments of Poyang Lake and the Yangtze River as a means of exploring the relationship between them. The results showed that the abundance of microplastics ranged from 356 n·kg-1 to 1452 n·kg-1, with an average abundance of 982.33 n·kg-1 in the dry sediments. Microplastics were identified as being of three main types:fragments, fibers, and films, whereby fragments were the most dominant type found and accounted for 48.23% of the total microplastics in the sediments. The main color of microplastics in the sediments was chromatic, and the particle size of most microplastics was<1 mm. The major polymer components were polyethylene (PE), low density polyethylene (LDPE), and polyethylene (PP). Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) results indicated that the surfaces of microplastics were rough, porous, cracked, and torn, and that the five heavy metals were found on the surfaces of different microplastics. These heavy metals accumulated to different degrees in the estuarine sediments, and redundancy analysis indicated that environmental factors[including the total organic carbon (TOC), pH, electrical conductivity (EC), and sediment particle size] and the occurrence of microplastics all had significant (P<0.05) effects on the distribution of heavy metal concentrations in sediments. Variation partitioning analysis (VPA) showed that the contribution rates of environmental factors and microplastics to the bioavailability of heavy metals were 37.70% and 0.70% respectively, but the combined effect was 49.60%. We conclude that microplastics in sediments may act as carriers of heavy metals and activate their bioavailability, hence posing a potential threat to the ecological security of estuaries and wetlands.

[Pollution Characteristics of Microplastics in Migratory Bird Habitats Located Within Poyang Lake Wetlands].

Microplastic pollution (plastics with particle sizes<5 mm) has become a serious problem. In this study, we sampled the surface water, sediment, and bird excrement from the shore, center of the lake, and active areas for birds in Baisha Lake, which is key habitat for migratory birds in the Poyang Lake wetlands. The microplastics were separated by flotation separation, and then, we analyzed the pollution characteristics of this area. The main results were as follows. ① There were significant differences in the abundance of microplastics in water and sediment at different sampling points in the study area. The average abundance of microplastics in water and sediment were 263.28 per·m-3 and 215.9 per·kg-1, respectively. The average abundance of microplastics in migratory bird feces was 4.93 per·g-1. ② There were four kinds of microplastics in the surface water in terms of the different morphologies of particles, namely, pellets, films, fragments, and fibers, among which pellets were the major type. The main colors of microplastics were red, yellow, green, blue, purple, black, and transparent. The rank in terms of the size of microplastics was follows: < 1 mm > 1-2 mm > 2-3 mm > 3-5 mm, and the abundance decreased with the increase of particle size. ③ There were also four kinds of microplastics with different morphologies in the sediment, namely, pellets, films, fragments, and fibers. The main colors of these microplastics were red, yellow, blue, purple, black, and transparent. Microplastic sizes on the shore of the lake and bird habitat were mainly < 1 mm, and 1-2 mm particles were mainly detected in the center of the lake. ④ There were four types of microplastics in the excrement of migratory birds, namely, pellets, films, fragments, and fibers. The colors of these microplastics were red, yellow, green, purple, and transparent, and the particle size was mainly < 1 mm. ⑤ There was no consistency in the types of microplastics in the water body, sediment, and bird droppings. However, the size distribution for water and bird excrement was consistent. The results indicate that Poyang Lake bird habitat is polluted by microplastics, and the birds are inevitably exposed to microplastics. This study warns that microplastics will be an emerging threat to migratory birds.

[Spatiotemporal variation characteristics of heavy metals pollution in the water, soil and sediments environment of the Lean River-Poyang Lake Wetland].

Overlying water, sediments, surface soils in the typical wetland areas of Lean River and Poyang Lake which were rich in non-ferrous metal mineral resources on both sides of the river, were chosen for monitoring heavy metals including copper, lead and cadmium of base flow in average season, flood season, and dry season in 2012. Statistical analysis methods were coupled to characterize the spatiotemporal variation of heavy metals pollution and identify the main sources. The results indicated that the concentrations of copper were the highest in all samples of each sampling sites in the Lean River-Poyang Lake wetland. And the content values of copper, lead and cadmium in different samples of different sampling sites also showed that the content values of copper were higher than those of lead, and the content values of lead were also higher than those of cadmium. The results also showed that the heavy metals pollution of copper, lead and cadmium in flood season was the heaviest whereas the heavy metals pollution in dry season was comparatively light. The results of the contents of the three kinds of heavy metals elements in different sampling sites of the watersheds of lean River showed that the contents of copper in the samples from the upstream sampling sites of Lean River were higher than those of other samples from other sites. And the contents of lead in the samples from the downstream sampling sites of Lean River were higher than those of other samples from other sampling sites. The contents of cadmium in the samples from the midstream sampling sites of Lean River were higher than those of other samples from other sites. The first principal component representing copper pollution explained 36. 99% of the total variance of water quality. The second principal component concerning representing lead pollution explained 30. 12% of the total variance. The correlation analysis results showed that there were significant positive correlations among the contents of copper in sediments and the contents of copper in overlying water. And there was also significant positive correlation between the contents of copper in sediments and the contents of copper in the surface soils. And the correlation analysis showed that there were significant positive correlations among the contents of cadmium in sediments and the contents of cadmium in surface soils. The above results reflected that the copper pollution or cadmium sources of water, soil and sediments were consistent, which were mainly from heavy metal acidic waste of mining emissions. The correlations between other components were not very obvious, which reflected the sources of pollutants were different.

[Assessment on heavy metal pollution in the sediment of Poyang Lake].

In order to know the heavy metals content and the degree of the potential ecological risk in the sediment of Poyang Lake in high-water period and low-water period, based on the detailed survey and analysis of the current state of pollution in Poyang Lake, using the Index of Geoaccumulation and the Potential Ecological Risk Index evaluate the heavy metals pollution of Poyang Lake. The results indicate that Poyang Lake has been polluted by heavy metals in various degrees. According to the Index of Geoaccumulation, the order of the analyzed heavy metals, arranged from highest to lowest pollution degree, is as follows: Cu > Pb > Zn > Cd; The ecological risk to Poyang Lake is: Cd>Pb> Zn>Cu;And the pollution is different from space and time, the pollution degree of each sampling site is arranged in the following order: Rao River> Longkou > Nanji shan > Dongku shan > Yumin village, and the degrees in low-water season are bigger than the degrees that in the high-water period commonly.