[2.2]Benzoindenophane-Based Chiral Indenyl Ligands: Design, Synthesis, and Applications in Asymmetric C-H Activation.

Development of chiral indenyl ligands for asymmetric C-H activation is a longstanding challenge, and extremely few successes have been achieved. In this paper, we describe a class of readily accessible, facilely tunable and user-friendly chiral indenyl ligands featuring a [2.2]benzoindenophane skeleton via a divergent synthesis strategy. The corresponding chiral indenyl rhodium catalysts were successfully applied in the asymmetric C-H activation reaction of O-Boc hydroxybenzamide with alkenes to give various chiral dihydroisoquinolone products (up to 97% yield, up to 98% ee). Moreover, the asymmetric C-H activation reaction of carboxylic acids with alkynes was also successfully accomplished, providing a range of axially chiral isocoumarins (up to 99% yield, up to 94% ee). Notably, this represents the first example of enantioselective transition metal catalyzed C(sp2)-H activation/oxidative coupling of benzoic acids with internal alkynes to construct isocoumarins. Given many attractive features of this class of indenyl ligands, such as convenient synthesis, high tunability and exclusive face-selectivity of coordination, its applications in more catalytic asymmetric C-H activation and in other asymmetric catalysis are foreseen.

H8-BINOL-Derived Chiral η6-Benzene Ligands: New Opportunities for the Ruthenium-Catalyzed Asymmetric C-H Activation.

Given the tremendous success of (p-cymene)RuII-catalyzed C-H activation over the past 20 years, the community has long been aware that the development of chiral η6-benzene (Ben) ligands should be a potent strategy for achieving the attractive but incredibly underdeveloped ruthenium(II)-catalyzed asymmetric C-H activation. However, it has rarely been achieved due to the severe difficulty in developing proper chiral Ben ligands. In particular, designing chiral Ben ligands by connecting a benzene fragment to a chiral framework including benzene rings remained an unsolved challenge until this effort. Here we present a novel class of axially chiral Ben ligands derived from readily available (S)-5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol ((S)-H8-BINOL) in 4-8 steps. Notably, when coordinated with ruthenium, such chiral Ben ligand containing three benzene rings only forms one of the three possible isomeric BenRuII complexes. The related chiral BenRuII catalysts could effectively catalyze the asymmetric C-H activation of N-sulfonyl ketimines with alkynes, affording a range of chiral spirocyclic sultams in up to 99% yield with up to >99% ee. These catalysts are expected to find broad applications in future.

Capture Fluorocarbon and Chlorofluorocarbon from Air Using DUT-67 for Safety and Semi-Quantitative Analysis.

Fluoro- and chlorofluorocabons (FC/CFCs) are important refrigerants, solvents, and fluoropolymers in industry while being toxic and carrying high global warming potential. Detection and reclamation of FC/CFCs based on adsorption technology with highly selective adsorbents is important to labor safety and environmental protection. Herein, the study reports an integrated method to combine capture, separation, enrichment, and analysis of representative FC/CFCs (chlorodifluoromethane(R22) and 1,1,1,2-tetrafluoroethane (R134a)) by using the highly stable and porous Zr-MOF, DUT-67. Gas adsorption and breakthrough experiments demonstrate that DUT-67 has high R22/R134a uptake (124/116 cm3 g-1) and excellent R22/R134a/CO2 separation performance (IAST selectivities of R22/CO2 and R134a/CO2 ranging from 51.4 to 33.3, and 31.1 to 25.8), even in rather low concentration and humid conditions. A semi-quantitative analysis protocol is set up to analyze the low concentrations of R22/R134a based on the high selective R22/R134a adsorption ability, fast adsorption kinetics, water-resistant utility, facile regeneration, and excellent recyclability of DUT-67. In situ single-crystal X-ray diffraction, theoretical calculations, and in situ diffuse reflectance infrared Fourier transform spectra have been employed to understand the adsorption mechanism. This work may provide a potential adsorbent for purge and trap technique under room temperature, thus promoting the application of MOFs for VOCs sampling and quantitative analysis.

Microporous Fluorinated MOF with Multiple Adsorption Sites for Efficient Recovery of C2H6 and C3H8 from Natural Gas.

Purifying C2H6/C3H8 from a ternary natural gas mixture through adsorption separation is an important but challenging process in the petrochemical industry. To address this challenge, the industry is exploring effective strategies for designing high-performance adsorbents. In this study, we present two metal-organic frameworks (MOFs), DMOF-TF and DMOF-(CF3)2, which have fluorinated pores obtained by substituting linker ligands in the host material. This pore engineering strategy not only provides suitable pore confinement but also enhances the adsorption capacities for C2H6/C3H8 by providing additional binding sites. Theoretical calculations and transient breakthrough experiments show that the introduction of F atoms not only improves the efficiency of natural gas separation but also provides multiple adsorption sites for C2H6/C3H8-framework interactions.

Dynamic Stereochemistry of M8 Pd6 Supramolecular Cages Based on Metal-Center Lability for Differential Chiral Induction, Resolution, and Recognition.

A series of isostructural supramolecular cages with a rhombic dodecahedron shape have been assembled with distinct metal-coordination lability (M8 Pd6 -MOC-16, M=Ru2+ , Fe2+ , Ni2+ , Zn2+ ). The chirality transfer between metal centers generally imposes homochirality on individual cages to enable solvent-dependent spontaneous resolution of Δ8 /Λ8 -M8 Pd6 enantiomers; however, their distinguishable stereochemical dynamics manifests differential chiral phenomena governed by the cage stability following the order Ru8 Pd6 >Ni8 Pd6 >Fe8 Pd6 >Zn8 Pd6 . The highly labile Zn centers endow the Zn8 Pd6 cage with conformational flexibility and deformation, enabling intrigue chiral-Δ8 /Λ8 -Zn8 Pd6 to meso-Δ4 Λ4 -Zn8 Pd6 transition induced by anions. The cage stabilization effect differs from inert Ru2+ , metastable Fe2+ /Ni2+ , and labile Zn2+ , resulting in different chiral-guest induction. Strikingly, solvent-mediated host-guest interactions have been revealed for Δ8 /Λ8 -(Ru/Ni/Fe)8 Pd6 cages to discriminate the chiral recognition of the guests with opposite chirality. These results demonstrate a versatile procedure to control the stereochemistry of metal-organic cages based on the dynamic metal centers, thus providing guidance to maneuver cage chirality at a supramolecular level by virtue of the solvent, anion, and guest to benefit practical applications.

Asymmetric Ruthenium-Catalyzed C-H Activation by a Versatile Chiral-Amide-Directing Strategy.

A versatile and readily available chiral amide directing group has been developed for the ruthenium(II)-catalyzed asymmetric C-H activation. Asymmetric C-H activation of the related chiral benzamides with various olefins, aldehydes and propargylic alcohols has been accomplished with high stereoselectivities, affording a series of chiral products including 3,4-dihydroisocoumarins (up to 96 % ee), isocoumarins (up to 92 % ee), phthalides (up to 99 % ee), chiral bicyclo[2.2.1]heptanes (>20 : 1 dr), 4-alkylidene-3,4-dihydroisocoumarins (up to 97 % ee) and allenes (>20 : 1 dr). Importantly, our methodologies enabled concise syntheses of many biologically active compounds and natural products (e.g., Montroumarin, Cyclosporone E, Cyclosporone Q, Concentricolide, Chuangxinol, and Eleutherol).

Chiral 3,3,3',3'-Tetramethyl-1,1'-Spirobiindanyl Cyclopentadienyl (TMSCp) Ligands: Design, Synthesis, and Applications.

Chiral cyclopentadienyl (Cp) rhodium(III) are powerful catalysts for achieving asymmetric C-H activation. This paper describes the design and synthesis of a new type of chiral Cp ligand bearing a chiral 3,3,3',3'-tetramethyl-1,1'-spirobiindanyl backbone. It features convenient synthesis, easy modification, and relatively low cost. Moreover, it holds great potential in achieving asymmetric C-H activation as exemplified by four examples examined in this work.

Chiral Arene Ligand as Stereocontroller for Asymmetric C-H Activation.

Development of chiral ligands is the most fundamental task in metal-catalyzed asymmetric synthesis. In the last 60 years, various kinds of ligands have been sophisticatedly developed. However, it remains a long-standing challenge to develop practically useful chiral η6 -arene ligands, thereby seriously hampering the asymmetric synthesis promoted by arene-metal catalysts. Herein, we report the design and synthesis of a class of readily tunable, C2 -symmetric chiral arene ligands derived from [2.2]paracyclophane. Its ruthenium(II) complexes have been prepared and successfully applied in the enantioselective C-H activation to afford a series of axially chiral isoquinolones (up to 99 % yield and 96 % ee). This study not only lays chemists' longstanding doubts about whether it is possible to use chiral arene ligands to stereocontrol ruthenium(II)-catalyzed asymmetric C-H activation, but also opens up a new avenue to achieve asymmetric C-H activation.

A Rare Flexible Metal-Organic Framework Based on a Tailorable Mn8 -Cluster Showing Smart Responsiveness to Aromatic Guests and Capacity for Gas Separation.

The design and creation of soft porous crystals combining regularity and flexibility may promote potential applications for gas storage and separation due to their deformable framework's responsiveness to external stimuli. The flexibility of metal-organic frameworks (MOFs) relies on alterable degrees of freedom that are mainly provided by organic linkers or the junctions linking organic and inorganic building units. Herein, we report a new dynamic MOF whose flexibility originates from an unprecedented tailorable Mn8 O38 -cluster and shows simultaneous coordination geometry changes and ligand migration that are reversibly driven by guest exchange. This provides an extra degree of freedom to the framework's deformation, resulting in three-dimensional variations in the framework that subtly respond to varied aromatic molecules. The gas adsorption behavior of this flexible MOF was evaluated, and the selective separation of light hydrocarbons and Freon gases is achieved.

A Class of Readily Tunable Planar-Chiral Cyclopentadienyl Rhodium(III) Catalysts for Asymmetric C-H Activation.

Chiral half-sandwich cyclopentadienyl rhodium(III) (CpRhIII ) complexes are powerful catalysts for promoting asymmetric C-H activation reactions. Their preparation normally involved linking or embedding the Cp motif to or into a certain chiral backbone to forge the so-called chiral Cp ligand. However, preparation of a planar-chiral CpRhIII catalyst bearing a non-chiral Cp ligand remains a formidable challenge and is rarely reported. We describe herein an unusual class of planar-chiral rhodium catalysts bearing non-chiral Cp ligands. Different from existing ones, this catalyst is readily tunable. Ten planar-chiral only CpRhIII catalysts were prepared with ease, and successfully used in two enantioselective C-H activation reactions. Given its convenient synthesis and high structural tunability, these catalysts are expected to find more utilities in asymmetric C-H activation.

High Water Adsorption MOFs with Optimized Pore-Nanospaces for Autonomous Indoor Humidity Control and Pollutants Removal.

The indoor air quality is of prime importance for human daily life and health, for which the adsorbents like zeolites and silica-gels are widely used for air dehumidification and harmful gases capture. Herein, we develop a pore-nanospace post-engineering strategy to optimize the hydrophilicity, water-uptake capacity and air-purifying ability of metal-organic frameworks (MOFs) with long-term stability, offering an ideal candidate with autonomous multi-functionality of moisture control and pollutants sequestration. Through variant tuning of organic-linkers carrying hydrophobic and hydrophilic groups in the pore-nanospaces of prototypical UiO-67, a moderately hydrophilic MOF (UiO-67-4Me-NH2 -38 %) with high thermal, hydrolytic and acid-base stability is screened out, featuring S-shaped water sorption isotherms exactly located in the recommended comfortable and healthy ranges of relative humidity for indoor ventilation (45 %-65 % RH) and adverse health effects minimization (40-60 % RH). Its exceptional attributes of water-uptake working capacity/efficiency, contaminants removal, recyclability and regeneration promise a great potential in confined indoor environment application.

Flexible Microporous Copper(II) Metal-Organic Framework toward the Storage and Separation of C1-C3 Hydrocarbons in Natural Gas.

A flexible and robust microporous copper(II) metal-organic framework (MOF) based on a methyl-functionalized ligand, namely, [Cu3(µ3-OH)2(L)2(DMF)] (LIFM-ZZ-1; L = 2,2'-dimethyl-4,4'-biphenyldicarboxylic acid and DMF = N,N-dimethylformamide), was constructed. Its sorption performance for the separation of CH4, C2H6, and C3H8 was investigated. LIFM-ZZ-1 showed a breathing behavior that led to a transition between large- and narrow-pore states. The sample also showed outstanding water stability. Gas adsorption experiments revealed that desolvated LIFM-ZZ-1 exhibited higher adsorption capacities for C2H6 and C3H8 (2.80 and 4.06 mmol·g-1) than for CH4 (0.39 mmol·g-1) at 298 K and 1 bar. Breakthrough experiments showed that a CH4/C2H6/C3H8 mixture was completely separated at 298 K, demonstrating the promising potential applications of this material for separating low contents of C2/C3 hydrocarbons from natural gas.

Qualitative screening and quantitative determination of multiclass water-soluble synthetic dyes in foodstuffs by liquid chromatography coupled to quadrupole Orbitrap mass spectrometry.

A LC-Q-Orbitrap HRMS analytical method for both qualitative screening and quantitative determination of 90 synthetic dyes including ten groups of isomers in foods has been established. An in-house synthetic dyes database and characteristic ions were also developed. Based on Q-Orbitrap HRMS, mass spectrum and fragmentation patterns of synthetic dyes were studied, which indicated that double charged ions were usually the main precursor ions. Matrix effects were successfully eliminated by the C18 d-SPE clean-up coupled with dilute and shoot approach with methanol-water (1:4, v/v) in 100-fold. For most of the compounds, mean recoveries were satisfactory between 70% and 120% with RSD < 20% at three spiked level in the range of 0.025-1.0 mg/kg. The screening detection limits ranged from 0.025 - 1.0 mg/kg. Method validation showed that the established method was efficient, rapid and high-throughput, which has been successfully applied to the monitoring of these water-soluble synthetic dyes in foods.

A Flexible-Robust Copper(II) Metal-Organic Framework Constructed from a Fluorinated Ligand for CO2/R22 Capture.

A flexible-robust copper(II) metal-organic framework, denoted as LIFM-100, has been successfully synthesized using a fluorinated linear dicarboxylate to link copper ions. LIFM-100 exhibits a breathing effect, which can transform reversibly between a large form (lp) and a narrow form (np) from single crystal to single crystal. In addition, LIFM-100 shows good thermal and chemical stability. By the introduction of trifluoromethyl functional groups and uncoordinated carboxyl acids, LIFM-100 features a good CO2/R22 adsorption/separation performance at 298 K, showing potential in natural gas purification and CO2/R22 capture.

Chiral Bicyclo[2.2.2]octane-Fused CpRh Complexes: Synthesis and Potential Use in Asymmetric C-H Activation.

A new class of chiral cyclopentadienyl rhodium(I) complexes (CpRhI ) bearing C2 -symmetric chiral bridged-ring-fused Cp ligands was prepared. The complexes were successfully applied to the asymmetric C-H activation reaction of N-methoxybenzamides with quinones, affording a series of chiral hydrophenanthridinones in up to 82 % yield with up to 99 % ee. Interestingly, structure analysis reveals that the side wall of the optimal chiral CpRhI catalyst is vertically more extended, horizontally less extended, and closer to the metal center in comparison with the classic binaphthyl and spirobiindanyl CpRhI complexes, and may thus account for its superior catalytic performance.

A Voltage-Responsive Synthetic Cl- -Channel Regulated by pH.

Transmembrane protein channels are an important inspiration for the design of artificial ion channels. Their dipolar structure helps overcome the high energy barrier to selectively translocate water and ions sharing one pathway, across the cell membrane. Herein, we report that the amino-imidazole (Imu) amphiphiles self-assemble via multiple H-bonding to form stable artificial Cl- -channels within lipid bilayers. The alignment of water/Cl- wires influences the conduction of ions, envisioned to diffuse along the hydrophilic pathways; at acidic pH, Cl- /H+ symport conducts along a partly protonated channel, while at basic pH, higher Cl- /OH- antiport translocate through a neutral channel configuration, which can be greatly activated by applying strong electric field. This voltage/pH regulated channel system represents an unexplored alternative for ion-pumping along artificial ion-channels, parallel to that of biology.

Progressive Folding and Adaptive Multivalent Recognition of Alkyl Amines and Amino Acids in p-Sulfonatocalix[4]arene Hosts: Solid-State and Solution Studies.

Invited for this month's cover is the group of Dr. Mihail Barboiu from the Institut Europeen des Membranes of Montpellier, France and the Lehn Institute of Functional Materials at Sun-yat Sen University in Guangzhou, China. The cover picture shows the molecular recognition of folded 1,ω-amino-acids guests within p-sulfonatocalix[4]arene host anions stabilized with alternating hydrated cations and water molecules. Read the full text of the article at 10.1002/cplu.202000232.

A New Class of C2 -Symmetric Chiral Cyclopentadienyl Ligand Derived from Ferrocene Scaffold: Design, Synthesis and Application.

A new class of C2 -symmetric, chiral cyclopentadienyl ligand based on planar chiral ferrocene backbone was developed. A series of its corresponding rhodium(I), iridium(I), and ruthenium(II) complexes were prepared as well. In addition, the rhodium(I) complexes were evaluated in the asymmetric catalytic intramolecular amidoarylation of olefin-tethered benzamides via C-H activation.

Progressive Folding and Adaptive Multivalent Recognition of Alkyl Amines and Amino Acids in p-Sulfonatocalix[4]arene Hosts: Solid-State and Solution Studies.

Calix[4]arenes have the ability to encapsulate biomimetic guests, offering interesting opportunities to explore their molecular recognition, very close to biological scenarios. In this study, p-sulfonatocalix[4]arene (C4 A) anions and hydrated alkali cations have been used for the in situ recognition of cationic 1,ω-diammonium-alkanes and 1,ω-amino-acids of variable lengths. NMR spectroscopy illustrates that these systems are stable in aqueous solution and the interaction process involves several binding states or stabilized conformations within the C4 A anion, depending of the nature of the guest. DOSY experiments showed that monomeric 1 : 1 host-guest species are present, while the cation does not influence their self-assembly in solution. The folded conformations observed in the solid-state X-ray single-crystal structures shed light on the constitutional adaptivity of flexible chains to environmental factors. Futhermore, a comprehensive screening of 30 single crystal structures helped to understand the in situ conformational fixation and accurate determination of the folded structures of the confined guest molecules, with a compression up to 40 % compared with their linear conformations.

Rhodium(III)-Catalyzed Asymmetric C-H Activation of N-Methoxybenzamide with Quinone and Its Application in the Asymmetric Synthesis of a Dihydrolycoricidine Analogue.

A chiral CpRhIII-catalyzed asymmetric C-H activation reaction of N-methoxybenzamides with quinones has been developed to efficiently forge chiral tricyclic hydrophenanthridinone scaffolds in ≤88% yield and ≤94% ee. With this methodology as the key step, an enantioenriched dihydrolycoricidine derivative has been synthesized in 64% overall yield in five steps.