The relationship between family resilience, post-traumatic growth, and caregiver burden among family caregivers of stroke survivors: a cross-sectional study.

The study aimed to explore the relationship between family resilience, post-traumatic growth(PTG), and caregiver burden among family caregivers of stroke survivors. Researchers conducted a cross-sectional study to recruit 253 family caregivers of stroke survivors from a public hospital in Shandong Province, China. Caregivers completed sociodemographic information, the Shortened Chinese Version of the Family Resilience Assessment Scale, the Post-traumatic Growth Inventory, and the Zarit Caregiver Burden Interview. We used Amos 24.0 to construct structural equation models and examine the mediating effects of stroke survivors' post-traumatic growth. Family resilience was positively associated with post-traumatic growth, and both family resilience and post-traumatic growth were negatively associated with caregiver burden. Post-traumatic growth partially mediated the relationship between family resilience and caregiver burden, and the mediating effect accounted for 21.27% of the total effect. Targeted interventions should address family resilience and post-traumatic growth as protective factors of caregiver burden.

Insights into how characteristics of dissolved algal organic matter affect the efficiency of modified clay in controlling harmful algal blooms.

Dissolved algal organic matter (dAOM) originating from harmful algal blooms (HABs) can deteriorate the quality of municipal water supplies, threaten the health of aquatic environments, and interfere with modified clay (MC)-based HABs control measures. In this study, we explored the composition of dAOM from Prorocentrum donghaiense, a typical HAB organism, and assessed the influence of dAOM on MC flocculation. Our results suggested that dAOM composition was complex and had a wide molecular weight (MW) distribution. MW and electrical properties were important dAOM characteristics affecting flocculation and algal removal efficiency of MC. Negatively charged high-MW components (>50 kDa) critically affected algal removal efficiency, reducing the zeta potential of MC particles and leading to small and weak flocs. However, the effect of dAOM depended on its concentration. When the cell density of P. donghaiense reached HAB levels, the high-MW dAOM strongly decreased the algal removal efficiency of MC.

Osteoinductive micro-nano guided bone regeneration membrane for in situ bone defect repair.

BACKGROUND: Biomaterials used in bone tissue engineering must fulfill the requirements of osteoconduction, osteoinduction, and osseointegration. However, biomaterials with good osteoconductive properties face several challenges, including inadequate vascularization, limited osteoinduction and barrier ability, as well as the potential to trigger immune and inflammatory responses. Therefore, there is an urgent need to develop guided bone regeneration membranes as a crucial component of tissue engineering strategies for repairing bone defects. METHODS: The mZIF-8/PLA membrane was prepared using electrospinning technology and simulated body fluid external mineralization method. Its ability to induce biomimetic mineralization was evaluated through TEM, EDS, XRD, FT-IR, zeta potential, and wettability techniques. The biocompatibility, osteoinduction properties, and osteo-immunomodulatory effects of the mZIF-8/PLA membrane were comprehensively evaluated by examining cell behaviors of surface-seeded BMSCs and macrophages, as well as the regulation of cellular genes and protein levels using PCR and WB. In vivo, the mZIF-8/PLA membrane's potential to promote bone regeneration and angiogenesis was assessed through Micro-CT and immunohistochemical staining. RESULTS: The mineralized deposition enhances hydrophilicity and cell compatibility of mZIF-8/PLA membrane. mZIF-8/PLA membrane promotes up-regulation of osteogenesis and angiogenesis related factors in BMSCs. Moreover, it induces the polarization of macrophages towards the M2 phenotype and modulates the local immune microenvironment. After 4-weeks of implantation, the mZIF-8/PLA membrane successfully bridges critical bone defects and almost completely repairs the defect area after 12-weeks, while significantly improving the strength and vascularization of new bone. CONCLUSIONS: The mZIF-8/PLA membrane with dual osteoconductive and immunomodulatory abilities could pave new research paths for bone tissue engineering.

Utilizing bioprinting to engineer spatially organized tissues from the bottom-up.

In response to the growing demand for organ substitutes, tissue engineering has evolved significantly. However, it is still challenging to create functional tissues and organs. Tissue engineering from the 'bottom-up' is promising on solving this problem due to its ability to construct tissues with physiological complexity. The workflow of this strategy involves two key steps: the creation of building blocks, and the subsequent assembly. There are many techniques developed for the two pivotal steps. Notably, bioprinting is versatile among these techniques and has been widely used in research. With its high level of automation, bioprinting has great capacity in engineering tissues with precision and holds promise to construct multi-material tissues. In this review, we summarize the techniques applied in fabrication and assembly of building blocks. We elaborate mechanisms and applications of bioprinting, particularly in the 'bottom-up' strategy. We state our perspectives on future trends of bottom-up tissue engineering, hoping to provide useful reference for researchers in this field.

Synergistic large segmental bone repair by 3D printed bionic scaffolds and engineered ADSC nanovesicles: Towards an optimized regenerative microenvironment.

Achieving sufficient bone regeneration in large segmental defects is challenging, with the structure of bone repair scaffolds and their loaded bioactive substances crucial for modulating the local osteogenic microenvironment. This study utilized digital laser processing (DLP)-based 3D printing technology to successfully fabricate high-precision methacryloylated polycaprolactone (PCLMA) bionic bone scaffold structures. Adipose-derived stem cell-engineered nanovesicles (ADSC-ENs) were uniformly and stably modified onto the bionic scaffold surface using a perfusion device, constructing a conducive microenvironment for tissue regeneration and long bone defect repair through the scaffold's structural design and the vesicles' biological functions. Scanning electron microscopy (SEM) examination of the scaffold surface confirmed the efficient loading of ADSC-ENs. The material group loaded with vesicles (PCLMA-BAS-ENs) demonstrated good cell compatibility and osteogenic potential when analyzed for the adhesion and osteogenesis of primary rabbit bone marrow mesenchymal stem cells (BMSCs) on the material surface. Tested in a 15 mm critical rabbit radial defect model, the PCLMA-BAS-ENs scaffold facilitated near-complete bone defect repair after 12 weeks. Immunofluorescence and proteomic results indicated that the PCLMA-BAS-ENs scaffold significantly improved the osteogenic microenvironment at the defect site in vivo, promoted angiogenesis, and enhanced the polarization of macrophages towards M2 phenotype, and facilitated the recruitment of BMSCs. Thus, the PCLMA-BAS-ENs scaffold was proven to significantly promote the repair of large segmental bone defects. Overall, this strategy of combining engineered vesicles with highly biomimetic scaffolds to promote large-segment bone tissue regeneration holds great potential in orthopedic and other regenerative medicine applications.

Dual-loss of PBRM1 and RAD51 identifies hyper-sensitive subset patients to immunotherapy in clear cell renal cell carcinoma.

BACKGROUND: Homologous recombination deficiency (HRD), though largely uncharacterized in clear cell renal cell carcinoma (ccRCC), was found associated with RAD51 loss of expression. PBRM1 is the second most common mutated genes in ccRCC. Here, we introduce a HRD function-based PBRM1-RAD51 ccRCC classification endowed with diverse immune checkpoint blockade (ICB) responses. METHODS: Totally 1542 patients from four independent cohorts were enrolled, including our localized Zhongshan hospital (ZSHS) cohort and Zhongshan hospital metastatic RCC (ZSHS-mRCC) cohort, The Cancer Genome Atlas (TCGA) cohort and CheckMate cohort. The genomic profile and immune microenvironment were depicted by genomic, transcriptome data and immunohistochemistry. RESULTS: We observed that PBRM1-loss ccRCC harbored enriched HRD-associated mutational signature 3 and loss of RAD51. Dual-loss of PBRM1 and RAD51 identified patients hyper-sensitive to immunotherapy. This dual-loss subtype was featured by M1 macrophage infiltration. Dual-loss was, albeit homologous recombination defective, with high chromosomal stability. CONCLUSIONS: PBRM1 and RAD51 dual-loss ccRCC indicates superior responses to immunotherapy. Dual-loss ccRCC harbors an immune-desert microenvironment but enriched with M1 macrophages. Dual-loss ccRCC is susceptible to defective homologous recombination but possesses high chromosomal stability.

Clay Sculpture-Inspired 3D Printed Microcage Module Using Bioadhesion Assembly for Specific-Shaped Tissue Vascularization and Regeneration.

3D bioprinting techniques have enabled the fabrication of irregular large-sized tissue engineering scaffolds. However, complicated customized designs increase the medical burden. Meanwhile, the integrated printing process hinders the cellular uniform distribution and local angiogenesis. A novel approach is introduced to the construction of sizable tissue engineering grafts by employing hydrogel 3D printing for modular bioadhesion assembly, and a poly (ethylene glycol) diacrylate (PEGDA)-gelatin-dopamine (PGD) hydrogel, photosensitive and adhesive, enabling fine microcage module fabrication via DLP 3D printing is developed. The PGD hydrogel printed micocages are flexible, allowing various shapes and cell/tissue fillings for repairing diverse irregular tissue defects. In vivo experiments demonstrate robust vascularization and superior graft survival in nude mice. This assembly strategy based on scalable 3D printed hydrogel microcage module could simplify the construction of tissue with large volume and complex components, offering promise for diverse large tissue defect repairs.

Efficient Thermal Management with Selective Metamaterial Absorber for Boosting Photothermal CO2 Hydrogenation under Sunlight.

Photothermal catalytic CO2 hydrogenation is a prospective strategy to simultaneously reduce CO2 emission and generate value-added fuels. However, the demand of extremely intense light hinders its development in practical applications. Herein, this work reports the novel design of Ni-based selective metamaterial absorber and employs it as the photothermal catalyst for CO2 hydrogenation. The selective absorption property reduces the heat loss caused by radiation while possessing effectively solar absorption, thus substantially increasing local photothermal temperature. Notably, the enhancement of local electric field by plasmon resonance promotes the adsorption and activation of reactants. Moreover, benefiting from the ingenious morphology that Ni nanoparticles (NPs) are encapsulated by SiO2 matrix through co-sputtering, the greatly improved dispersion of Ni NPs enables enhancing the contact with reaction gas and preventing the agglomeration. Consequently, the catalyst exhibits an unprecedented CO2 conversion rate of 516.9 mmol gcat -1 h-1 under 0.8 W cm-2 irradiation, with near 90% CO selectivity and high stability. Significantly, this designed photothermal catalyst demonstrates the great potential in practical applications under sunlight. This work provides new sights for designing high-performance photothermal catalysts by thermal management.

A preliminary study on the spasticity reduction of quadriceps after selective dorsal rhizotomy in pediatric cases of spastic cerebral palsy.

OBJECTIVE: This study aimed to evaluate the potential alleviation of quadriceps spasticity in children diagnosed with spastic cerebral palsy (CP) following selective dorsal rhizotomy (SDR). METHODS: A retrospective study was conducted on children suffering from spastic CP who underwent SDR at the Department of Neurosurgery, Shanghai Children's Hospital, from July 2018 to September 2020. Inclusion criteria comprised children exhibiting quadriceps spasticity exceeding modified Ashworth Scale grade 2. Muscle tone and motor function were assessed before the operation, at short-term follow-up and at the last follow-up after SDR. Additionally, intraoperative neurophysiological monitoring data were reviewed. RESULTS: The study comprised 20 eligible cases, where, prior to surgery, 35 quadriceps muscles exhibited spasticity exceeding modified Ashworth Scale grade 2. Following short-term and mid-term follow-up, specifically an average duration of 11 ± 2 days and 1511 ± 210 days after SDR, it was observed that muscle tension in adductors, hamstrings, gastrocnemius, and soleus decreased significantly. This reduction was accompanied by a decrease in quadriceps muscle tone in 24 out of 35 muscles (68.6%). Furthermore, the study found that intraoperative electrophysiological parameters can predict postoperative spasticity relief in the quadriceps. The triggered electromyographic (EMG) output of the transected sensory root/rootlets after single-pulse stimulation revealed that the higher the EMG amplitudes in quadriceps, the greater the likelihood of postoperative decrease in quadriceps muscle tension. CONCLUSIONS: SDR demonstrates the potential to reduce muscle spasticity in lower extremities in children diagnosed with CP, including a notable impact on quadriceps spasticity even they are not targeted in SDR. The utilization of intraoperative neurophysiological monitoring data enhances the predictability of quadriceps spasticity reduction following SDR.

Langerhans cell histiocytosis of the skull in 23 children.

OBJECTIVE: To explore the clinical features, diagnosis, treatment and prognosis of Langerhans cell histiocytosis (LCH) of the skull in children. METHODS: This study retrospectively summarized the clinical manifestations, treatment methods and follow-up status of children with skull LCH who were admitted to the Department of Neurosurgery of Shanghai Children's Hospital from January 2014 to June 2021. RESULTS: A total of 23 patients confirmed by histology as LCH received hospitalization treatment, including 14 males and 9 females, aged (5.76 ± 3.86) years old. The clinical manifestations were mostly incidentally discovered head masses that gradually enlarged (19 cases, 82.61%). Only 2 cases are affected by multiple systems, while the rest are affected by single systems. 9 patients were involved in multiple skull lesions, and 14 patients had local skull lesions. All patients underwent surgical intervention, with 17 patients undergoing total resection and 6 patients undergoing biopsy. 21 patients received chemotherapy after surgery. The median follow-up was 2.46 years (range 0.33-6.83 years). 21 patients had their symptoms and signs under control or even resolved, and 2 patients experienced recurrence during follow-up. The overall control rate reached 91.30%. CONCLUSION: Personalized treatment plans according to different clinical types. Regular outpatient follow-up is crucial to monitor disease recurrence and late effects.

The discrepancy in triggered electromyography responses between fatty filum and normal filum terminale.

BACKGROUND: Functional role of filum terminale (FT) was not well studied though it contains structure basis for nerve impulse conduction. We aimed to explore the possible functions of the FT from the perspective of triggered electromyography (EMG) during surgery. METHODS: We retrospectively reviewed intraoperative neurophysiological monitoring data from pediatric patients who underwent intradural surgeries at the lumbar level in Shanghai Children's. Hospital from January 2018 to March 2023. Altogether 168 cases with complete intraoperative neurophysiological recordings of the FT were selected for further analysis. Triggered EMG recordings of the filum originated from two main types of surgeries: selective dorsal rhizotomy (SDR) and fatty filum transection. RESULTS: 96 cases underwent SDR and 72 cases underwent fatty filum transection. Electrical stimulation of the FT with fatty infiltration did not elicit electromyographic activity in the monitored muscles with the maximum stimulus intensity of 4.0 mA, while the average threshold for FT with normal appearance was 0.68 mA, and 89 out of 91 FT could elicit electromyographic responses in monitored channels. The threshold ratio of filum to motor nerve roots at the same surgical segment was significantly higher in patients with fatty filum, and a cut-off point of 21.03 yielded an area under curve of 0.943, with 100% sensitivity and 85.71% specificity. CONCLUSION: Filum with normal appearance can elicit electromyographic activity in the lower limbs/anal sphincter similar to the performance of the cauda equina nerve roots. The threshold of fatty filum is different from that of normal appearing FT. Triggered EMG plays an important role in untethering surgeries.

NKG2A+CD8+ T cells infiltration determines immunosuppressive contexture and inferior response to immunotherapy in clear cell renal cell carcinoma.

BACKGROUND: Immunotherapy is gaining momentum, but current treatments have limitations in terms of beneficiaries. Clear cell renal cell carcinoma (ccRCC) harbors the highest expression of human leukocyte antigen E (HLA-E), ligand of NKG2A, among all solid tumors. In this study, we aim to investigate the role of NKG2A+CD8+ T cells in tumor microenvironment and its potential as a novel target in ccRCC. METHODS: This study included four independent cohorts, including 234 patients from Zhongshan cohort (ZSHC) who underwent partial or radical nephrectomy at Zhongshan Hospital, and 117 metastatic patients from metastatic Zhongshan cohort (ZSHC-metastatic renal cell carcinoma) who were treated with immune checkpoint inhibitor or tyrosine kinase inhibitor alone. We also incorporated a cohort of 530 patients diagnosed with ccRCC from The Cancer Genome Atlas (referred to as TCGA-kidney renal clear cell carcinoma) and 311 patients from CheckMate cohort for bioinformatics exploration and hypothesis validation. Fresh surgical specimens from 15 patients who underwent ccRCC surgery at Zhongshan Hospital were collected for flow cytometry analysis. Another 10 fresh surgical specimens were used to investigate the therapeutic potential of NKG2A blockade after in vitro intervention. The infiltration of NKG2A+CD8+ T cells was assessed using immunohistochemical staining, flow cytometry, and immunofluorescence staining in ZSHC cohort. RESULTS: Patients with higher infiltration of NKG2A+CD8+ T cells in ccRCC exhibited shorter overall survival and resistance to immunotherapy. NKG2A+CD8+ T cells expressed upregulated checkpoint molecules and displayed impaired effector functions, along with tissue-residency characteristics. Combination of programmed cell death protein-1 (PD-1) blockade and NKG2A blockade demonstrated an enhanced capability in reactivating CD8+ T cells effector functions. CONCLUSION: Intense infiltration of NKG2A+CD8+ T cells were associated with poorer prognosis and response to immunotherapy. NKG2A blockade combined with current immunotherapy exhibited a robust ability to reactivate CD8+ T cells effector functions.

Continuous Flow System for Highly Efficient and Durable Photocatalytic Oxidative Coupling of Methane.

Photocatalytic oxidative coupling of methane (OCM) into value-added industrial chemicals offers an appealing green technique for achieving sustainable development, whereas it encounters double bottlenecks in relatively low methane conversion rate and severe overoxidation. Herein, we engineer a continuous gas flow system to achieve efficient photocatalytic OCM while suppressing overoxidation by synergizing the moderate active oxygen species, surface plasmon-mediated polarization, and multipoint gas intake flow reactor. Particularly, a remarkable CH4 conversion rate of 218.2 µmol h-1 with an excellent selectivity of ∼90% toward C2+ hydrocarbons and a remarkable stability over 240 h is achieved over a designed Au/TiO2 photocatalyst in our continuous gas flow system with a homemade three-dimensional (3D) printed flow reactor. This work provides an informative concept to engineer a high-performance flow system for photocatalytic OCM by synergizing the design of the reactor and photocatalyst to synchronously regulate the mass transfer, activation of reactants, and inhibition of overoxidation.

2D/2D Heterojunction of BiOBr/BiOI Nanosheets for In Situ H2 O2 Production and Activation toward Efficient Photocatalytic Wastewater Treatment.

The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H2 O2 presents a promising approach for pollutant removal; however, the processes of H2 O2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H2 O2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O2 reduction for H2 O2 production. Moreover, the ultrathin BiOI provides abundant active sites for H2 O2 adsorption, promoting in situ H2 O2 activation for •O2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min-1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H2 O2 production and activation, paving the way toward sustainable environmental remediation using solar energy.

Exogenous salicylic acid induces defense responses in tea plants against Toxoptera aurantii (Hemiptera: Aphididae).

Toxoptera aurantii is one of the most destructive pests, threatening the yield and quality of tea plantations. The salicylic acid (SA)-mediated signaling pathway is vital for the induction of plant defense responses; however, its role in tea plant resistance to T. aurantii remains unclear. Thus, this study used and electrical penetration graph and monitoring of population dynamics to evaluate the effects of exogenous SA application on T. aurantii feeding behavior and population growth in tea seedlings. Moreover, the effects of SA treatment on the activities of defense-related enzymes were analyzed. Probe counts and the duration of xylem sap ingestion were significantly higher in SA-treated plants than those in the control group. The total duration of passive phloem ingestion was significantly decreased in 0.5 mmol/l SA-treated plants, and the application of 0.5, 1, and 4 mmol/l SA significantly inhibited T. aurantii population growth. In addition, the activities of polyphenol oxidase, peroxidase, and superoxide dismutase were significantly increased in the 0.5 mmol/l SA-treated plants. Overall, this study demonstrates the capacity of exogenous SA to activate defense responses against T. aurantii. These results have crucial implications for understanding the mechanisms of enhanced resistance, thereby providing a sustainable approach for managing T. aurantii.

Laparoscopic vs open radical resection in management of gallbladder carcinoma: A systematic review and meta-analysis.

BACKGROUND: Radical resection offers the only hope for the long-term survival of patients with gallbladder carcinoma (GBC) above the T1b stage. However, whether it should be performed under laparoscopy for GBC is still controversial. AIM: To compare laparoscopic radical resection (LRR) with traditional open radical resection (ORR) in managing GBC. METHODS: A comprehensive search of online databases, including Medline (PubMed), Cochrane Library, and Web of Science, was conducted to identify comparative studies involving LRR and ORR in GBCs till March 2023. A meta-analysis was subsequently performed. RESULTS: A total of 18 retrospective studies were identified. In the long-term prognosis, the LRR group was comparable with the ORR group in terms of overall survival and tumor-free survival (TFS). LRR showed superiority in terms of TFS in the T2/tumor-node-metastasis (TNM) Ⅱ stage subgroup vs the ORR group (P = 0.04). In the short-term prognosis, the LRR group had superiority over the ORR group in the postoperative length of stay (POLS) (P < 0.001). The sensitivity analysis showed that all pooled results were robust. CONCLUSION: The meta-analysis results show that LRR is not inferior to ORR in all measured outcomes and is even superior in the TFS of patients with stage T2/TNM Ⅱ disease and POLS. Surgeons with sufficient laparoscopic experience can perform LRR as an alternative surgical strategy to ORR.

Different Tea Germplasms Distinctly Influence the Adaptability of Toxoptera aurantii (Hemiptera: Aphididae).

Aphids are typical phloem-sucking insect pests. A good understanding regarding their feeding behavior and population dynamics are critical for evaluating host adaptation and screening of aphid-resistant resources. Herein, the adaptability of Toxoptera aurantii (Boyer) (Hemiptera: Aphididae) to different hosts was evaluated via electropenetrography and an age-stage, two-sex life table on six tea germplasms: Zikui (ZK), Zhongcha108 (ZC108), Zhongcha111 (ZC111), Qianmei419 (QM419), Meitan5 (MT5), and Fudingdabaicha (FD). Our findings revealed that the feeding activities of T. aurantii differed considerably among the host plants. T. aurantii exhibited significantly more pathway activities on ZK and FD than on the other hosts. However, the duration of feeding of T. aurantii on ZK phloem considerably decreased compared with those of the other germplasms. Life parameters indicated that T. aurantii exhibited the highest intrinsic rate of increase (r), net reproductive rate (R0), and finite rate of increase (λ) on MT5, and the maximum values of total longevity and oviposition period were recorded on FD; these variables were reduced significantly on ZK. The results of our study demonstrate that T. aurantii can successfully survive on the six tea germplasms; however, ZK was less suitable for T. aurantii and should be considered as a potential source of resistance in breeding and Integrated Pest Management.

Oxygen Plasma Induced Nanochannels for Creating Bimetallic Hollow Nanocrystals.

Platinum-based metal catalysts are considered excellent converters in various catalytic reactions, particularly in fuel cell applications. The atomic structure at the nanocrystal surface and the metal interface both influence the catalytic performance, controlling the efficiency of the electrochemical reactions. Here we report the synthesis of Ag/Pt and Ag/Pd core/shell nanocrystals and insight into the formation mechanism of these bimetallic core/shell nanocrystals when undergoing oxygen plasma treatment. We carefully designed the oxidation treatment that determines the structural and compositional evolution. The accelerated oxidation-triggered diffusion of Ag toward the outer metal shell leads to the Kirkendall effect. After prolonged oxygen plasma treatment, most core/shell nanocrystals evolve into hollow spheres. At the same time, a minor fraction of the metal remains unchanged with a well-protected Ag core and a monocrystalline Pt or Pd shell. We hypothesize that the O2 plasma disturbs the Pt or Pd shell surface and introduces active O species that react with the diffused Ag from the inside out. Based on EDX elemental mapping, combined with several electron microscopic techniques, we deduced the formation mechanism of the hollow structures to be as follows: (I) the oxidation of Ag within the Pt or Pd lattice causes a disrupted crystal lattice of Pt or Pd; (II) nanochannels arise at the defect locations on the Pt or Pd shell; (III) the remaining Ag atoms pass through these nanochannels and leave a hollow crystal behind. Our findings deepen the understanding of interface dynamics of bimetallic nanostructured catalysts under an oxidative environment and unveil an alternative approach for catalyst pretreatment.

Integration of Single-Atom Catalyst with Z-Scheme Heterojunction for Cascade Charge Transfer Enabling Highly Efficient Piezo-Photocatalysis.

Piezo-assisted photocatalysis (namely, piezo-photocatalysis), which utilizes mechanical energy to modulate spatial and energy distribution of photogenerated charge carriers, presents a promising strategy for molecule activation and reactive oxygen species (ROS) generation toward applications such as environmental remediation. However, similarly to photocatalysis, piezo-photocatalysis also suffers from inferior charge separation and utilization efficiency. Herein, a Z-scheme heterojunction composed of single Ag atoms-anchored polymeric carbon nitride (Ag-PCN) and SnO2- x is developed for efficient charge carrier transfer/separation both within the catalyst and between the catalyst and surface oxygen molecules (O2 ). As revealed by charge dynamics analysis and theoretical simulations, the synergy between the single Ag atoms and the Z-scheme heterojunction initiates a cascade electron transfer from SnO2- x to Ag-PCN and then to O2 adsorbed on Ag. With ultrasound irradiation, the polarization field generated within the piezoelectric hybrid further accelerates charge transfer and regulates the O2 activation pathway. As a result, the Ag-PCN/SnO2- x catalyst efficiently activates O2 into ·O2 - , ·OH, and H2 O2 under co-excitation of visible light and ultrasound, which are consequently utilized to trigger aerobic degradation of refractory antibiotic pollutants. This work provides a promising strategy to maneuver charge transfer dynamics for efficient piezo-photocatalysis by integrating single-atom catalysts (SACs) with Z-scheme heterojunction.

Reshaping Inner Helmholtz Layer and Electrolyte Structure via Multifunctional Organic Molecule Enabling Dendrite-Free Zn Metal Anode.

The dendrite growth and parasitic reactions that occur on Zn metal anode (ZMA)/electrolyte interface hinder the development of aqueous zinc ion batteries (AZIBs) in next-generation renewable energy storage systems. Fortunately, reconstructing the inner Helmholtz layer (IHL) by introducing an electrolyte additive, is viewed as one of the most promising strategies to harvest the stable ZMA. Herein, (4-chloro-3-nitrophenyl) (pyridin-4-yl) methanone (CNPM) with quadruple functional groups is introduced into the ZnSO4 electrolyte to reshape the interface between ZMA and electrolyte and change the solvation structure of Zn2+ . Density functional theory (DFT) calculations manifest that the ─C═O, ─Cl, ─C═N─, and ─NO2 functional groups of CNPM interact with metallic Zn simultaneously and adsorb on the ZMA surface in a parallel arrangement manner, thus forming a water-poor IHL and creating well-arranged ion transportation channels. Furthermore, theoretical calculations and experimental results demonstrate that CNPM absorbed on the Zn anode surface can serve as zincophilic sites for inducing uniform Zn deposition along the (002) plane. Benefiting from the synergistic effect of these functions, the dendrite growth and parasitic reactions are suppressed significantly. As a result, ZMA exhibits a long cycle life (2900 h) and high coulombic efficiency (CE) (500 cycles) in the ZnSO4 +CNPM electrolyte.