Regulating Ion-Dipole Interactions in Weakly Solvating Electrolyte towards Ultra-Low Temperature Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) are recognized as promising energy storage devices. However, they suffer from rapid capacity decay at ultra-low temperatures due to high Na+ desolvation energy barrier and unstable solid electrolyte interphase (SEI). Herein, a weakly solvating electrolyte (WSE) with decreased ion-dipole interactions is designed for stable sodium storage in hard carbon (HC) anode at ultra-low temperatures. 2-methyltetrahydrofuran with low solvating power is incorporated into tetrahydrofuran to regulate the interactions between Na+ and solvents. The reduced Na+-dipole interactions facilitate more anionic coordination in the first solvation sheath, which consistently maintains anion-enhanced solvation structures from room to low temperatures to promote inorganic-rich SEI formation. These enable WSE with a low freezing point of -83.3 °C and faster Na+ desolvation kinetics. The HC anode thus affords reversible capacities of 243.2 and 205.4 mAh g-1 at 50 mA g-1 at -40 and -60 °C, respectively, and the full cell of HC||Na3V2(PO4)3 yields an extended lifespan over 250 cycles with high capacity retention of ~100 % at -40 °C. This work sheds new lights on the ion-dipole regulation for ultra-low temperature SIBs.

New Reaction Pathway of Superoxide Disproportionation Induced by a Soluble Catalyst in Li-O2 Batteries.

Aprotic Li-O2 battery has attracted considerable interest for high theoretical energy density, however the disproportionation of the intermediate of superoxide (O2 - ) during discharge and charge leads to slow reaction kinetics and large voltage hysteresis. Herein, the chemically stable ruthenium tris(bipyridine) (RB) cations are employed as a soluble catalyst to alternate the pathway of O2 - disproportionation and its kinetics in both the discharge and charge processes. RB captures O2 - dimer and promotes their intramolecular charge transfer, and it decreases the energy barrier of the disproportionation reaction from 7.70 to 0.70 kcal mol-1 . This facilitates the discharge and charge processes and simultaneously mitigates O2 - and singlet oxygen related side reactions. These endow the Li-O2 battery with reduced discharge/charge voltage gap of 0.72 V and prolonged lifespan for over 230 cycles when coupled with RuO2 catalyst. This work highlights the vital role of superoxide disproportionation for Li-O2 battery.

Solvation Structure with Enhanced Anionic Coordination for Stable Anodes in Lithium-Oxygen Batteries.

Li-O2 batteries have garnered much attention due to their high theoretical energy density. However, the irreversible lithium plating/stripping on the anode limits their performance, which has been paid little attention. Herein, a solvation-regulated strategy for stable lithium anodes in tetraethylene glycol dimethyl ether (G4) based electrolyte is attempted in Li-O2 batteries. Trifluoroacetate anions (TFA- ) with strong Li+ affinity are incorporated into the lithium bis(fluorosulfonyl)imide (LiTFSI)/G4 electrolyte to attenuate the Li+ -G4 interaction and form anion-dominant solvates. The bisalt electrolyte with 0.5 M LiTFA and 0.5 M LiTFSI mitigates G4 decomposition and induces an inorganic-rich solid electrolyte interphase (SEI). This contributes to decreased desolvation energy barrier from 58.20 to 46.31 kJ mol-1 , compared with 1.0 M LiTFSI/G4, for facile interfacial Li+ diffusion and high efficiency. It yields extended lifespan of 120 cycles in Li-O2 battery with a limited Li anode (7 mAh cm-2 ). This work gains comprehensive insights into rational electrolyte design for Li-O2 batteries.

Atomic Ruthenium-Riveted Metal-Organic Framework with Tunable d-Band Modulates Oxygen Redox for Lithium-Oxygen Batteries.

Non-aqueous Li-O2 batteries have aroused considerable attention because of their ultrahigh theoretical energy density, but they are severely hindered by slow cathode reaction kinetics and large overvoltages, which are closely associated with the discharge product of Li2O2. Herein, hexagonal conductive metal-organic framework nanowire arrays of nickel-hexaiminotriphenylene (Ni-HTP) with quadrilateral Ni-N4 units are synthesized to incorporate Ru atoms into its skeleton for NiRu-HTP. The atomically dispersed Ru-N4 sites manifest strong adsorption for the LiO2 intermediate owing to its tunable d-band center, leading to its high local concentration around NiRu-HTP. This favors the formation of film-like Li2O2 on NiRu-HTP with promoted electron transfer and ion diffusion across the cathode-electrolyte interface, facilitating its reversible decomposition during charge. These allow the Li-O2 battery with NiRu-HTP to deliver a remarkably reduced charge/discharge polarization of 0.76 V and excellent cyclability. This work will enrich the design philosophy of electrocatalysts for regulation of kinetic behaviors of oxygen redox.

Metal-Organic Framework-Based Lithium-Oxygen Batteries.

Rechargeable lithium-oxygen batteries (LOBs) are considered to be the next-generation energy technology owing to their high theoretical energy density. However, the sluggish cathode kinetics and degradation of Li anodes result in large voltage hysteresis and low coulombic efficiency. Various materials have been applied to promote the electrochemical performance of LOBs. Metal-organic frameworks (MOFs) possessing porous structures, open active sites and adjustable pore sizes have been attempted as promising materials for catalysts and separators of LOBs. This concept presents an overview of different MOF-based catalysts for LOBs, including traditional, conductive, semi-conductive and soluble MOFs, as well as our recently proposed photo-involved LOBs. Recent advances in MOF-based separators to restrain the shuttling of redox mediators between cathodes and anodes and suppress the formation of lithium dendrites are also discussed. Finally, perspectives on the development of MOF-based LOBs for future research are presented.

Quenching singlet oxygen via intersystem crossing for a stable Li-O2 battery.

Aprotic Li-O2 batteries are a promising energy storage technology, however severe side reactions during cycles lead to their poor rechargeability. Herein, highly reactive singlet oxygen (1O2) is revealed to generate in both the discharging and charging processes and is deterimental to battery stability. Electron-rich triphenylamine (TPA) is demonstrated as an effective quencher in the electrolyte to mitigate 1O2 and its associated parasitic reactions, which has the tertiary amine and phenyl groups to manifest excellent electrochemical stability and chemical reversibility. It reacts with electrophilic 1O2 to form a singlet complex during cycles, and it then quickly transforms to a triplet complex through nonradiative intersystem crossing (ISC). This efficiently accelerates the conversion of 1O2 to the ground-state triplet oxygen to eliminate its derived side reactions, and the regeneration of TPA. These enable the Li-O2 battery with obviously reduced overvoltages and prolonged lifetime for over 310 cycles when coupled with a RuO2 catalyst. This work highlights the ISC mechanism to quench 1O2 in Li-O2 battery.

Bio-based carbon materials with multiple functional groups and graphene structure to boost methane production from ethanol anaerobic digestion.

This study evaluated the effects of bio-based carbon materials on methane production by anaerobic digestion. The results showed that biochar and hydrochar can promote cumulative methane yield by 15% to 29%. However, there was no statistical significance (p > 0.05) between hydrochar and biochar produced at different temperature on methane production. 16S rRNA gene sequencing and bioinformatics analysis showed that biochar and hydrochar enriched microorganism that might participate in direct interspecies electron transfer (DIET) such as Pseudomonadaceae, Bacillaceae, and Clostridiaceae. The the surface properties of the modified biochar were characterized with BET, Raman, FTIR and XPS. Bio-based carbon materials with uniform dispersion provided a stable environment for the DIET of microorganisms and electrons are transferred through aromatic functional groups on the surface of materials. This study reveals bio-based carbon materials surface properties on methane production in anaerobic digestion and provides a new approach to recycling spent coffee grounds.

Asymmetric Structure Design of Electrolytes with Flexibility and Lithium Dendrite-Suppression Ability for Solid-State Lithium Batteries.

Solid polymer electrolytes can be used to construct solid-state lithium batteries (SSLBs) using lithium metals as the anode. However, the lifespan and safety problems of SSLBs caused by lithium dendrite growth have hindered their practical application. Here, we have designed and prepared a rigid-flexible asymmetric solid electrolyte (ASE) that is used in building SSLBs. The ASE can inhibit efficiently the growth of lithium dendrites and lead to a long cycle life of SSLBs due to the hierarchical structure of a combination of "polymer-in-ceramic" (i.e., rigid ceramic layer of Li6.4La3Zr1.4Ta0.6O12) and "LiBOB-in-polymer" (i.e., soft polymer-layer of polyethylene oxide and LiBOB components). The results demonstrated that a symmetrical battery with ASE (Li|ASE|Li) can be steadily cycled for more than 2000 h and yielded a flat plating/stripping voltage profile under a current density of 0.1 mA cm-2. As a consequence, the SSLB of LiFePO4|ASE|Li delivered a specific capacity of 155.1 mA h g-1 with a capacity retention rate up to 90.2% after 200 cycles with the Coulombic efficiency over 99.6% per cycle. This asymmetric structure combines the advantages of ceramics and polymers, providing an ingenious solution for building rigid and flexible solid electrolytes.

3D web freestanding RuO2-Co3O4 nanowires on Ni foam as highly efficient cathode catalysts for Li-O2 batteries.

The mechanism of Li-O2 batteries is based on the reactions of lithium ions and oxygen, which hold a theoretical higher energy density of approximately 3500 W h kg-1. In order to improve the practical specific capacity and cycling performance of Li-O2 batteries, a catalytically active mechanically robust air cathode is required. In this work, we synthesized a freestanding catalytic cathode with RuO2 decorated 3D web Co3O4 nanowires on nickel foam. When the specific capacity was limited at 500 mA h g-1, the RuO2-Co3O4/NiF had a stable cycling life of up to 122 times. The outstanding performance can be primarily attributed to the robust freestanding Co3O4 nanowires with RuO2 loading. The unique 3D web nanowire structure provides a large surface for Li2O2 growth and RuO2 nanoparticle loading, and the RuO2 nanoparticles help to promote the round trip deposition and decomposition of Li2O2, therefore enhancing the cycling behavior. This result indicates the superiority of RuO2-Co3O4/NiF as a freestanding highly efficient catalytic cathode for Li-O2 batteries.