Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4.

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 µL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2.

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 µmol g-1 h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Selective Photoreduction of CO2 to CH4 Triggered by Metal-Vacancy Pair Sites.

Selectively achieving the photoreduction of carbon dioxide (CO2) to methane (CH4) remains a significant challenge, which primarily arises from the complexity of the protonation process. In this work, we designed metal-vacancy pair sites in defective metal oxide semiconductors, which anchor the reactive intermediates with a bridged linkage for the selective protonation to produce CH4. As an example, oxygen-deficient Nb2O5 nanosheets are synthesized, in which the niobium-oxygen vacancy pair sites are demonstrated by X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra. In situ Fourier transform infrared spectroscopy monitors the *CH3O intermediate, a key intermediate for CH4 production, during the CO2 photoreduction in oxygen-deficient Nb2O5 nanosheets. Importantly, the built metal-vacancy pair sites regulate the *CH3O formation step as a spontaneous process, making the reduction of CO2 to CH4 the preferred method. Therefore, the oxygen-deficient Nb2O5 nanosheets exhibit a CH4 formation rate of 19.14 µmol g-1 h-1, with an electron selectivity of ∼94.1%.

Optimized full CO2 photoreduction process by defective spinel atomic layers.

The impact of defects on the carbon dioxide (CO2) photoreduction property is sometimes contradictory. Herein, we employ two-dimensional materials, possessing high-density and high-uniformity active sites, as ideal models to thoroughly investigate the influence of defects on three main processes during CO2 photoreduction. As an example, oxygen-deficient ZnGa2O4 atomic layers are successfully fabricated, verified by the electron spin resonance spectra, X-ray photoelectron spectroscopy spectra and X-ray absorption near edge structure spectra. UV-vis diffuse reflectance spectra, photoluminescence spectra, surface photovoltage spectroscopy, N2 adsorption-desorption isotherm plots and density functional theory calculations indicate that the presence of oxygen defects helps to expand the photoabsorption, accelerate the carrier separation, and enhance the CO2 adsorption and protonation process. As a result, the carbon monoxide evolution rate of the defective ZnGa2O4 atomic layers was approximately 88 times higher than that of the ZnGa2O4 atomic layers under visible light irradiation. In other words, this work discloses that the introduction of defects on photocatalysts allows the optimization of the three primary processes, thus obtaining boosted CO2 photoreduction performance.

Fundamentals and Challenges of Engineering Charge Polarized Active Sites for CO2 Photoreduction toward C2 Products.

ConspectusGlobal warming and climatic deterioration are partly caused by carbon dioxide (CO2) emission. Given this, CO2 reduction into valuable carbonaceous fuels is a win-win route to simultaneously alleviate the greenhouse effect and the energy crisis, where CO2 reduction into hydrocarbon fuels by solar energy may be a potential strategy. Up to now, most of the current photocatalysts photoconvert CO2 to C1 products. It is extremely difficult to achieve production of C2 products, which have higher economic value and energy density, due to the kinetic challenge of C-C coupling of the C1 intermediates. Therefore, to realize CO2 photoreduction to C2 fuels, design of high-activity photocatalysts to expedite the C-C coupling is significant. Besides, the current mechanism for CO2 photoreduction toward C2 fuels is usually uncertain, which is possibly attributed to the following two reasons: (1) It is arduous to determine the actual catalytic sites for the C-C coupling step. (2) It is hard to monitor the low-concentration active intermediates during the multielectron transfer step.Most traditional metal-based photocatalysts usually possess charge balanced active sites that have the same charge density. In this aspect, the neighboring C1 intermediates may also show the same charge distribution, which would lead to dipole-dipole repulsion, thus preventing C-C coupling for producing C2 fuels. By contrast, photocatalysts with charge polarized active sites possess obviously different charge distributions in the adjacent C1 intermediates, which can effectively suppress the electrostatic repulsion to steer the C-C coupling. Based on this analysis, higher asymmetric charge density on the active sites would be more beneficial to anchoring between the adjacent intermediates and active atoms in catalysts, which can boost C-C coupling.In this Account, we summarize various strategies, including vacancy engineering, doping engineering, loading engineering, and heterojunction engineering, for tailoring charge polarized active sites to boost the C-C coupling for the first time. Also, we overview diverse in situ characterization technologies, such as in situ X-ray photoelectron spectroscopy, in situ Raman spectroscopy, and in situ Fourier transform infrared spectroscopy, for determining charge polarized active sites and monitoring reaction intermediates, helping to reveal the internal catalytic mechanism of CO2 photoreduction toward C2 products. We hope this Account may help readers to understand the crucial function of charge polarized active sites during CO2 photoreduction toward C2 products and provide guidance for designing and preparing highly active catalysts for photocatalytic CO2 reduction.

Selective CO2 -to-C2 H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide.

Selective CO2 photoreduction into C2 fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C-C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C-C coupling for selectively forming C2 products. As an example, FeCoS2 atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co-Fe dual sites to turn into Co-O-Fe triatomic sites, thus promoting C-C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS2 atomic layers exhibit C2 H4 formation rate of 20.1 µmol g-1 h-1 , with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.

Progress and perspective for conversion of plastic wastes into valuable chemicals.

Today, discarded plastics in nature have caused serious "white pollution", however these plastic wastes contain abundant carbon resources that could serve as the feedstock to produce commodities. Because of this, it is requisite to convert these plastic wastes into valuable chemicals. Herein, the state-of-the-art techniques for plastic conversion are divided into two categories, those performed under violent conditions and mild conditions, in which the conversion mechanisms are discussed. The strategies under violent conditions are closer to practical application thanks to their excellent conversion efficiencies, while the strategies under mild conditions are more environmentally friendly, showing enormous development potential in the future. We summarize in detail the pyrolysis, hydropyrolysis, solvolysis and microwave-initiated catalysis for bond cleavage in plastic wastes at temperatures ranging from 448 to 973 K. Also, we overview the photocatalysis, electrocatalysis and biocatalysis for bond cleavage in plastic wastes at near and even normal temperature and pressure. Finally, we present some suggestions and outlooks concerning the improvement of current techniques and in-depth mechanisms of investigation for conversion of plastics into valuable chemicals.

Direct Polyethylene Photoreforming into Exclusive Liquid Fuel over Charge-Asymmetrical Dual Sites under Mild Conditions.

Direct polyethylene photoreforming to high-energy-density C2 fuels under mild conditions is of great significance and still faces a huge challenge, which is partly attributed to the extreme instability of *CH2CH2 adsorbed on the traditional catalysts with single catalytic sites. Herein, charge-asymmetrical dual sites are designed to boost the adsorption of *CH2CH2 for direct polyethylene photoreforming into C2 fuels under normal temperature and pressure. As a prototype, the synthetic Zr-doped CoFe2O4 quantum dots with charge-asymmetrical dual metal sites realize direct polyethylene photoreforming into acetic acid, with 100% selectivity of liquid fuel and the evolution rate of 1.10 mmol g-1 h-1, outperforming those of most previously reported photocatalysts under similar conditions. In situ X-ray photoelectron spectra, density-functional-theory calculations, and control experiments reveal the charge-asymmetrical Zr-Fe dual sites may act as the predominate catalytic sites, which can simultaneously bond with the *CH2CH2 intermediates for the following stepwise oxidation to form C2 products.

Plastics-to-syngas photocatalysed by Co-Ga2O3 nanosheets.

Plastics take hundreds of years to degrade naturally, while their chemical degradation typically requires high temperature and pressure. Here, we first utilize solar energy to realize the sustainable and efficient plastic-to-syngas conversion with the aid of water at ambient conditions. As an example, the commercial plastic bags could be efficiently photoconverted into renewable syngas by Co-Ga2O3 nanosheets, with hydrogen and carbon monoxide formation rates of 647.8 and 158.3 µmol g-1 h-1. In situ characterizations and labelling experiments unveil water is photoreduced into hydrogen, while non-recyclable plastics including polyethylene bags, polypropylene boxes and polyethylene terephthalate bottles are photodegraded into carbon dioxide, which is further selectively photoreduced into carbon monoxide. In-depth investigation illustrates that the efficiency of syngas production mainly depends on the carbon dioxide reduction process and hence photocatalysts of high carbon dioxide reduction activity should be designed to promote the efficiency of plastic-to-syngas conversion in the future. The concept for the photoreforming of non-recyclable plastics into renewable syngas helps to eradicate 'white pollution' and alleviate the energy crisis simultaneously.

Room-Temperature Photooxidation of CH4 to CH3OH with Nearly 100% Selectivity over Hetero-ZnO/Fe2O3 Porous Nanosheets.

The huge challenge for CH4 photooxidation into CH3OH lies in the activation of the inert C-H bond and the inhibition of CH3OH overoxidation. Herein, we design two-dimensional in-plane Z-scheme heterostructures composed of two different metal oxides, with efforts to polarize the symmetrical CH4 molecules and strengthen the O-H bond in CH3OH. As a prototype, we first fabricate ZnO/Fe2O3 porous nanosheets, where high-resolution transmission electron microscopy and in situ X-ray photoelectron spectroscopy affirm their in-plane Z-scheme heterostructure. In situ Fourier transform infrared spectra and in situ electron paramagnetic resonance spectra demonstrate their higher amount of ·CH3 radicals relative to the pristine ZnO porous nanosheets, in which density functional theory calculations validate that the high local charge accumulation on Fe sites lowers the CH4 adsorption energy from 0.14 to 0.06 eV. Moreover, the charge-accumulated Fe sites strengthen the polarity of the O-H bond in CH3OH through transferring electrons to the O atoms, confirmed by the increased barrier from 0.30 to 2.63 eV for *CH3O formation, which inhibits the homolytic O-H bond cleavage and thus suppresses CH3OH overoxidation. Accordingly, the CH3OH selectivity over ZnO/Fe2O3 porous nanosheets reaches up to nearly 100% with an activity of 178.3 µmol-1 gcat-1, outperforming previously reported photocatalysts without adding any oxidants under room temperature and ambient pressure.

Selective CH4 Partial Photooxidation by Positively Charged Metal Clusters Anchored on Carbon Aerogel under Mild Conditions.

Selective partial photooxidation of CH4 into value-added chemicals under mild conditions still remains a huge bottleneck. Herein, we design positively charged metal clusters anchored on a three-dimensional porous carbon aerogel. With 0.75FeCA800-4 as an example, X-ray photoelectron spectra and Raman spectra disclose that the iron sites are positively charged. In situ electron paramagnetic resonance spectra show that the Feδ+ sites could donate electrons to activate CH4 into CH4- by virtue of the excited-state carbon atoms; meanwhile, they could convert H2O2 into •OH radicals under irradiation. In addition, in situ diffuse Fourier-transform infrared spectra suggest the CH3OOH obtained is derived from CH4 oxidation by the hydroxylation of *CH3 and *CH3O intermediates. Consequently, 0.75FeCA800-4 displays a CH3OOH selectivity of near 100% and a CH3OOH evolution rate of 13.2 mmol gFe-1 h-1, higher than those of most previously reported supported catalysts under similar conditions.

Asymmetric Triple-Atom Sites Confined in Ternary Oxide Enabling Selective CO2 Photothermal Reduction to Acetate.

Light-induced heat is largely neglected in traditional photocatalytic systems, especially for the thermodynamically and kinetically challenging CO2 reduction to C2 fuels. Herein, we first design asymmetric Metal1-O-Metal2 triple-atom sites confined in phenakite to facilitate C-C coupling and employ photoinduced heat to increase molecular thermal vibration and accelerate CO2 reduction to C2 fuels. Using O-vacancy-rich Zn2GeO4 nanobelts as prototypes, quasi in situ Raman spectra disclose the Zn-O-Ge triatomic sites are likely the reactive sites. Density functional theory calculations reveal that the asymmetric Zn-O-Ge sites could promote C-C coupling through inducing distinct charge distributions of neighboring C1 intermediates, whereas the created O vacancies could lower the energy barrier of the rate-determining hydrogenation step from 1.46 to 0.67 eV. Catalytic performances under different testing conditions demonstrate that light initiates the CO2 reduction reaction. In situ Fourier-transform infrared spectra and D2O kinetic isotopic effect experiments disclose that light-induced heat kinetically triggers C-C coupling and accelerates OCCO* hydrogenation via providing abundant hydrogen species. Consequently, in a simulated air atmosphere under 0.1 W/cm2 illumination at 348 K, the O-vacancy-rich Zn2GeO4 nanobelts demonstrate an acetate output of 12.7 µmol g-1 h-1, a high acetate selectivity of 66.9%, a considerable CO2-to-CH3COOH conversion ratio of 29.95%, and a stability of up to 220 h.

Efficient Photooxidation of Methane to Liquid Oxygenates over ZnO Nanosheets at Atmospheric Pressure and Near Room Temperature.

Direct CH4 photoconversion into liquid oxygenates under mild conditions still represents a huge challenge. Herein, two-dimensional oxide semiconductors are designed to generate abundant active O- species for activating C-H bond of methane. Taking the synthetic ZnO nanosheets as an example, in situ electron paramagnetic resonance spectra verified their lattice oxygen atoms could capture photoexcited holes and generate active O- species, which could efficiently abstract H from CH4 to generate ·CH3 radicals. Gibbs free energy calculations and in situ Fourier-transform infrared spectroscopy corroborated the rate-limiting step was the first C-H bond activation process, whereas the exoergic oxidation of *CHO to HCOOH was easier than the endoergic overoxidation to CO, accounting for the selective production of liquid oxygenates. As a result, the formation rate of liquid oxygenates over ZnO nanosheets reached 2.21 mmol g-1 h-1 with a selectivity of 90.7% at atmospheric pressure and approximately 50 °C, outperforming previously reported photocatalysts under similar conditions.

Conversion of Waste Plastics into Value-Added Carbonaceous Fuels under Mild Conditions.

Owing to the extremely difficult breakage of the adamant cross-linked structures, converting non-recyclable plastic wastes into valuable fuels usually demands rigorous conditions, wherein the required high temperature and pressure is inevitably energy-wasting and environment-polluting. Given this aspect, herein, the recent achievements in the conversion of plastics into value-added carbonaceous fuels under mild conditions are summarized. In detail, solar-driven conversion of commercial plastics into liquid fuels in alkaline solutions or pure water at ambient temperature and pressure are surveyed; also, enzyme-driven conversion of polyethylene terephthalate into terephthalic acid and ethylene glycol at a mild temperature are emphasized; and low-temperature-driven catalytic conversion of polyethylene into oils and waxes with the help of a light alkane are reviewed. Finally, other potentially used strategies and in situ characterization technologies in plastics degradation under moderate conditions are presented.

Selective CO2 Photoreduction into C2 Product Enabled by Charge-Polarized Metal Pair Sites.

Selective CO2 photoreduction into a high-energy-density C2 product is still challenging. Here, charge-polarized metal pair sites are designed to trigger C-C coupling through manipulating asymmetric charge distribution on the reduction intermediates. Taking the synthetic partially reduced Co3O4 nanosheets as an example, theoretical calculations unveil the asymmetric charge distribution on surface cobalt sites. The formed charge-polarized cobalt pair sites not only donate electrons to CO2 molecules but also accelerate the coupling of asymmetric COOH* intermediates through lowering the energy barrier from 0.680 to 0.240 eV, affirmed by quasi in situ X-ray photoelectron spectroscopy and Gibbs free energy calculations. Also, the electron-rich cobalt sites strengthen their interaction with O of the HOOC-CH2O* intermediate, which favors the C-O bond cleavage and hence facilitates the rate-limiting CH3COOH desorption process. The partially reduced Co3O4 nanosheets achieve 92.5% selectivity of CH3COOH in simulated air, while the CO2-to-CH3COOH conversion ratio is 2.75%, obviously higher than that in pure CO2.

Fundamentals and challenges of ultrathin 2D photocatalysts in boosting CO2 photoreduction.

Carbon dioxide photoreduction currently suffers from low photoconversion efficiency and poor product selectivity. Ultrathin two-dimensional materials, which possess highly active sites with high density and high uniformity, can serve as ideal models to tailor three crucial parameters that determine the carbon dioxide photoconversion efficiency and product selectivity. In this review, we summarize the extended absorption spectrum range enabled by ultrathin two-dimensional semiconductors with defect levels and intermediate bands, as well as conductors with special partially occupied bands. Moreover, we overview the boosted carrier separation efficiency aroused by ultrathin two-dimensional semiconductors with defect states, surface polarization states and built-in electric fields. We also review the accelerated redox reaction kinetics induced by ultrathin two-dimensional semiconductors with in-plane heterostructures, isolated single atoms and abundant low-coordinated dual-metal sites. Finally, we end this review with an outlook on unsolved issues concerning highly selective and efficient photo-conversion of carbon dioxide into C2+ products by ultrathin two-dimensional materials with dual or multiple active sites.

Broad-Spectral-Response Photocatalysts for CO2 Reduction.

The poor conversion efficiency of carbon dioxide photoreduction has hindered the practical application at present, and one of the prime reasons for this obstacle is the inefficient solar energy utilization of photocatalysts. Generally speaking, it is contradictory for a photocatalyst to concurrently possess the broad-spectral response and appropriate band-edge positions for coinstantaneous carbon dioxide reduction and water oxidation. In this Outlook, we summarize a series of strategies for realizing visible-light and IR-light-driven carbon dioxide photoreduction under the guarantee of suitable band-edge positions. In detail, we overview the absorbance of visible light enabled by narrow band gaps in photocatalysts, the extended photoabsorption from UV into the visible light range induced by defect levels and dopant energy levels in photocatalysts, and a more negative conduction band and positive valence band acquired by Z-scheme heterojunctions in photocatalysts. Then, we highlight the expansive photoresponse of IR light caused by intermediate bands in semiconductor photocatalysts and partially occupied bands in conductor photocatalysts. Finally, we end this Outlook concerning more design strategies and application fields of broad-spectral-response photocatalysts.

Photocatalytic Conversion of Waste Plastics into C2 Fuels under Simulated Natural Environment Conditions.

Reported here is the first highly selective conversion of various waste plastics into C2 fuels under simulated natural environment conditions by a sequential photoinduced C-C cleavage and coupling pathway, where single-use bags, disposable food containers, food wrap films, and their main components of polyethylene, polypropylene, and polyvinyl chloride can be photocatalytically transformed into CH3 COOH without using sacrificial agents. As an example, polyethylene is photodegraded 100 % into CO2 within 40 h by single-unit-cell thick Nb2 O5 layers, while the produced CO2 is further photoreduced to CH3 COOH. Various methods and experiments disclose that O2 and . OH radicals trigger the oxidative C-C cleavage of polyethylene to form CO2 , while other investigations show that the yielded CH3 COOH stems from CO2 photoreduction by C-C coupling of . COOH intermediates. This two-step plastic-to-fuel conversion may help to simultaneously address the white pollution crisis and harvest highly valuable multicarbon fuels in natural environments.

Visible-Light-Driven Overall Water Splitting Boosted by Tetrahedrally Coordinated Blende Cobalt(II) Oxide Atomic Layers.

Directly splitting water into H2 and O2 with solar light is extremely important; however, the overall efficiency of water splitting still remains extremely low. Two types of ultrathin semiconductor layers with the same elements and the same thicknesses were designed to uncover how different atomic arrangements influence water-splitting efficiency thermodynamically and kinetically. As an example, tetrahedrally coordinated blende and octahedrally coordinated rocksalt CoO atomic layers with nearly the same thicknesses were synthesized for the first time. The blende CoO atomic layers have a smaller Eg and abundant d-d internal transition features relative to the rocksalt CoO atomic layers, which ensure enhanced visible-light harvesting ability. Density functional theory calculations reveal that the Bader charge for Co atoms in blende CoO atomic layers is larger than that of the rocksalt CoO atomic layers, which facilitates photocarrier transfer kinetics, as verified by photoluminescence spectra and time-resolved fluorescence emission decay spectra. In situ FTIR spectra and energy calculations reveal that the *OOH dissociation step is the rate-limiting step, where the blende CoO atomic layers possess a smaller *OOH dissociation energy thanks to their higher Bader charge and stronger steric effect, as confirmed by the elongated Co-OOH bonds. The blende CoO atomic layers exhibit visible-light-driven H2 and O2 formation rates of 4.43 and 2.63 µmol g-1 h-1 , roughly 3.7 times higher than those of the rocksalt CoO atomic layers.

Ultrathin Conductor Enabling Efficient IR Light CO2 Reduction.

The concurrent transformation of carbon dioxide and water into hydrocarbons and oxygen by low-photonic-energy IR light still represents a huge challenge. Here, we design an ultrathin conductor system, in which the special partially occupied band serves as the mediator to simultaneously guarantee IR light harvesting and satisfy band-edge positions, while the ultrathin configuration improves charge separation rates and surface redox kinetics. Taking the low cost and earth-abundant CuS as an example, we first fabricate ultrathin CuS layers, where temperature-dependent resistivities, valence-band spectra, and theoretical calculations affirm their metallic nature. Synchrotron-radiation photoelectron and ultraviolet-visible-near-infrared spectra show that metallic CuS atomic layers could realize a new cooperative intraband-interband transition under IR light irradiation, where the generated electrons and holes could simultaneously involve the carbon dioxide reduction and water oxidation reactions. As a result, CuS atomic layers exhibit nearly 100% selective CO production with an evolution rate of 14.5 µmol g-1 h-1 under IR light irradiation, while the catalytic performance shows no obvious decay after a 96 h test. Briefly, benefiting from ultrahigh conductivity and a unique partially occupied band, abundant conductor materials such as conducting metal sulfides and metal nitrides hold great promise for applications as effective IR light responsive photocatalysts.