[Regulatory function and mechanism of autophagy on osteoclast].

Osteoclast (OC) is multinucleated, bone-resorbing cells originated from monocyte/macrophage lineage of cells, excessive production and abnormal activation of which could lead to many bone metabolic diseases, such as osteoporosis, osteoarthritis, etc. Autophagy, as a highly conserved catabolic process in eukaryotic cells, which plays an important role in maintaining cell homeostasis, stress damage repair, proliferation and differentiation. Recent studies have found that autophagy was also involved in the regulation of osteoclast generation and bone resorption. On the one hand, autophagy could be induced and activated by various factors in osteocalsts, such as nutrient deficiency, hypoxia, receptor activator of nuclear factor(NF)-κB ligand(RANKL), inflammatory factors, wear particles, microgravity environment, etc, different inducible factors, such as RANKL, inflammatory factors, wear particles, could interact with each other and work together. On the other hand, activated autophagy is involved in regulating various stages of osteoclast differentiation and maturation, autophagy could promote proliferation of osteoclasts, inhibiting apoptosis, and promoting differentiation, migration and bone resorption of osteoclast. The classical autophagy signaling pathway mediated by mammalian target of rapamycin complex 1(mTORC1) is currently a focus of research, and it could be regulated by upstream signalings such as phosphatidylinositol 3 kinase(PI-3K)/protein kinase B (PKB), AMP-activated protein kinase(AMPK). However, the paper found that mTORC1-mediated autophagy may play a bidirectional role in regulating differentiation and function of osteoclasts, and its underlying mechanism needs to be further ciarified. Integrin αvß3 and Rab protein families are important targets for autophagy to play a role in osteoclast migration and bone resorption, respectively. In view of important role of osteoclast in the occurrence of various bone diseases, it is of great significance to elucidate the role of autophagy on osteoclast and its mechanism for the treatment of various bone diseases. The autophagy pathway could be used as a new therapeutic target for the treatment of clinical bone diseases such as osteoporosis.

Sinapic Acid Inhibits IL-1ß-Induced Apoptosis and Catabolism in Nucleus Pulposus Cells and Ameliorates Intervertebral Disk Degeneration.

BACKGROUND: Low back pain (LBP) is a very common condition and leads to serious pain, disability, and price tag all over the world. Intervertebral disk degeneration (IDD) is one of the major reasons that contributed to LBP. The levels of interleukin 1 beta (IL-1ß) increase significantly in degenerative disks. IL-1ß also accelerates IDD. Sinapic acid (SA) has the effect of anti-inflammatory, antioxidant and antimicrobial. However, the effect of SA on IDD has never been studied. Therefore, the aim of this study was to figure out whether SA has protective effect on nucleus pulposus (NP) cells and further explore the possible underlying mechanism. METHODS: The nucleus pulposus (NP) tissues of rats were collected and cultured into NP cells. The NP cells were stimulated by IL-1ß and treated with SA. In vitro treatment effects were evaluated by ELISA, Western blot assay, immunofluorescence, TUNEL method and real-time PCR. We conducted percutaneous needle puncture in the rat tail to build intervertebral disk degeneration model and treated rats with SA. In vivo treatment effects were evaluated by hematoxylin and eosin (HE) and safranin O (SO) staining and magnetic resonance imaging (MRI) method. RESULTS: Our results showed that SA not only inhibited apoptosis but also suppressed inflammatory mediators including nitric oxide (NO), prostaglandin E2 (PGE2), cyclooxygenase 2 (COX-2), inducible nitric oxide synthase (iNOS) interleukin 6 (IL-6) and tumor necrosis factor alpha (TNF-α) in IL-1ß-stimulated NP cells. As to extracellular matrix (ECM), SA could increase collagen II and aggrecan levels and reduce the expression of MMP13 and ADAMTS5 during the stimulation of IL-1ß. Furthermore, SA could activate nuclear factor-erythroid 2-related factor-2 (Nrf2) to inhibit nuclear factor κB (NF-κB) induced by IL-1ß. Nrf2 knockdown partly reduced the protective effect of SA on NP cells. Correspondingly, SA ameliorated IDD by promoting Nrf2 expression. In vivo results also showed that SA could delay the progression of IDD. CONCLUSION: In conclusion, we demonstrated that SA could protect the degeneration of NP cells and revealed the underlying mechanism of SA on Nrf2 activation in NP cells.

Minimum 2-Year Experience with Magnetically Controlled Growing Rods for the Treatment of Early-Onset Scoliosis: A Systematic Review.

Magnetically controlled growing rods have been used to treat early-onset scoliosis for the last 9 years; however, few studies have been published, with only short-term follow-up. The aim of the present study is to systematically review the outcomes of magnetically controlled growing rods in the treatment of early-onset scoliosis with a minimum of 2-year follow-up. Studies were included if patients with early-onset scoliosis (scoliosis diagnosed before 10 years of age) underwent implantation of magnetically controlled growing rods with a minimum of 2-year follow-up. The literature review and data extraction followed the established preferred reporting items for systematic review and meta-analysis guidelines. Data of distraction frequency, number of distractions, distracted length, Cobb angle, kyphosis, T1-T12 length, and T1-S1 length preoperatively, postoperatively, and at final follow-up were collected. Data regarding complications and unplanned reoperations were also extracted. The mean values of these parameters were calculated, or pooled meta-analysis was performed if available. Ten articles were included in this systematic review, with a total of 116 patients and a follow-up period between 23 and 61 months. The mean preoperative Cobb angle and kyphosis angle were 60.1° and 38.0°, respectively, and improved to 35.4° and 26.1° postoperatively. At final follow-up, the Cobb and kyphosis angles were maintained at 36.9° and 36.0°, respectively. The average preoperative T1-T12 and T1-S1 lengths were 180.6 mm and 293.6 mm, respectively, and increased to 198.3 mm and 320.3 mm postoperatively. T1-T12 and T1-S1 lengths were 212.3 mm and 339.3 mm at final follow-up, respectively. The overall rate of patients with complications was 48% (95% confidence interval [CI], 0.38-0.58) and unplanned reoperation 44% (95% CI, 0.33-0.55) after sensitivity analysis. The current evidence from different countries with a minimum of a 2-year follow-up suggests that magnetically controlled growing rods are an effective technique to treat pediatric scoliosis and promote spine growth. However, nearly half of patients still developed complications or required unplanned reoperations.

Biomechanical properties of novel transpedicular transdiscal screw fixation with interbody arthrodesis technique in lumbar spine: A finite element study.

PURPOSE: The purpose of this study was to investigate finite element biomechanical properties of the novel transpedicular transdiscal (TPTD) screw fixation with interbody arthrodesis technique in lumbar spine. METHODS: An L4-L5 finite element model was established and validated. Then, two fixation models, TPTD screw system and bilateral pedicle screw system (BPSS), were established on the validated L4-L5 finite element model. The inferior surface of the L5 vertebra was set immobilised, and moment of 7.5 Nm was applied on the L4 vertebra to test the range of motion (ROM) and stress at flexion, extension, lateral bending and axial rotation. RESULTS: The intact model was validated for prediction accuracy by comparing two previously published studies. Both of TPTD and BPSS fixation models displayed decreased motion at L4-L5. The ROMs of six moments of flexion, extension, left lateral bending, right lateral bending, left axial rotation and right axial rotation in TPTD model were 1.92, 2.12, 1.10, 1.11, 0.90 and 0.87°, respectively; in BPSS model, they were 1.48, 0.42, 0.35, 0.38, 0.74 and 0.75°, respectively. The screws' peak stress of above six moments in TPTD model was 182.58, 272.75, 133.01, 137.36, 155.48 and 150.50 MPa, respectively; and in BPSS model, it was 103.16, 129.74, 120.28, 134.62, 180.84 and 169.76 MPa, respectively. CONCLUSION: Both BPSS and TPTD can provide stable biomechanical properties for lumbar spine. The decreased ROM of flexion, extension and lateral bending was slightly more in BPSS model than in TPTD model, but TPTD model had similar ROM of axial rotation with BPSS model. The screws' peak stress of TPTD screw focused on the L4-L5 intervertebral space region, and more caution should be put at this site for the fatigue breakage. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: Our finite element study provides the biomechanical properties of novel TPTD screw fixation, and promotes this novel transpedicular transdiscal screw fixation with interbody arthrodesis technique be used clinically.

Does the Iliac Wing Influence L5 Pedicle Screw Fixation?

OBJECTIVE: To explore whether the iliac wing influences L5 pedicle screw (PS) fixation and to propose methods to reduce such influence. METHODS: A total of 100 computed tomography scans (from 50 male and 50 female patients) of the lower lumbar region and pelvis were obtained and 3-dimensionally reconstructed. Cylinders with 6.5-mm diameters were drawn to simulate the different trajectories of L5 PS. The maximum lengths and lateral angles of trajectories, and the vertical distances from the inner edge of the iliac wing to these trajectories, were measured. RESULTS: The maximum lengths and lateral angles differed significantly among trajectories; the maximum length, but not the lateral angle, differed significantly between male and female subjects. The influence of the iliac wing was more significant in male than in female subjects. The iliac wing had a greater effect on screws implanted along the pedicle axis than on screws for which the trajectories commenced at Du's entry point and passed through the center of the pedicle. CONCLUSIONS: This study elucidates the influence of the iliac wing on L5 PS fixation. Careful attention is required when implanting PSs, especially in male patients. The combined use of Du's technique and a percutaneous method for PS implantation effectively reduces the influence of the iliac wing. To minimize the complications of PS fixation further, preoperative simulation of fixation for each patient is very important.

Biomechanical Role of the Thoracolumbar Ligaments of the Posterior Ligamentous Complex: A Finite Element Study.

OBJECTIVES: To investigate the effect of sequential ligament failure on the range of motion (ROM) and location of the instantaneous axes of rotation (IAR) of the thoracolumbar spine (T12-L1) finite element (FE) model, and to verify the role of the supraspinous ligament (SSL) in maintaining the stability of the injured thoracolumbar spine. METHODS: An FE model of the fractured thoracolumbar spine was developed and validated against published data. The posterior ligamentous complex (PLC) in the fractured T12-L1 segment was then reduced in a sequential manner from the facet capsular ligament (FCL), part of the interspinous ligament (ISL), SSL, and entire ISL, to the ligamentum flavum (LF). The ROM and IAR of the T12-L1 segment were measured at the fracture and at each reduced ligament step under 4 directions of flexion, extension, lateral bending, and rotation, and 4 bending motions of 1.5, 3.0, 4.5, 6.0 Nm. RESULTS: The FE model showed a consistent increase in the ROM and location of the IAR as the ligaments were removed sequentially. Furthermore, failure of the SSL had the most significant influence on the change in the ROM and IAR in flexion. In extension, removal of the FCL caused the largest shift. CONCLUSIONS: The SSL is a significant ligament that allows the PLC to maintain the stability of the thoracolumbar spine during injury.

Percutaneous anterior C1/2 transarticular screw fixation: salvage of failed percutaneous odontoid screw fixation for odontoid fracture.

BACKGROUND: The objective of this study is to investigate the outcomes and safety of using percutaneous anterior C1/2 transarticular screw fixation as a salvage technique for odontoid fracture if percutaneous odontoid screw fixation fails. METHODS: Fifteen in 108 odontoid fracture patients (planned to be treated by percutaneous anterior odontoid screw fixation) were failed to introduce satisfactory odontoid screw trajectory. To salvage this problem, we chose the percutaneous anterior C1/2 transarticular screw fixation technique in treatment of these patients. The visual analogue score (VAS) of neck pain and Neck Disability Index (NDI) of all patients were scored at pre-operation, 3 months after operation, and final follow-up. Additional, technique-related complications were recorded and collected. RESULTS: Percutaneous C1/2 transarticular screw fixation was performed successfully in all 15 patients whose odontoid screw fixation failed. No technique-related complications (such as nerve injury, spinal cord injury, and esophageal injury) occurred. The VAS of neck pain and NDI score improved significantly (P = 0.000) after operation, and no significant differences were found when compared to 93 non-salvage patients who successfully performed the percutaneous anterior odontoid screw fixation. No screw loose or breakage occurred, all of the odontoid fractures achieve radiographic fusion, bony fusion bridge could be observed at the C1/2 lateral articular facet on 9/15 patients. CONCLUSIONS: We suggest that percutaneous anterior C1/2 transarticular screw fixation is a good alternative salvage technique if percutaneous odontoid screw fixation failed, and it is a minimally invasive, feasible, and safe technique.

Cortical bone trajectory screws placement via pedicle or pedicle rib unit in the pediatric thoracic spine (T9-T12): A 2-dimensional multiplanar reconstruction study using computed tomography.

Thoracic cortical bone trajectory (CBT) screw fixation can maximize the thread contact with cortical bone, and it is 53.8% higher than that of the traditional pedicle screws. Moreover, it can also enable less tissue dissection and retraction for reduced muscle disruption.Eighty pediatric patients are divided into 4 age groups and their thoracic vertebrae are analyzed on computed tomography (CT) images. The maximal screw length, maximal screw diameter, screw diameter, and the cephalad angle are measured. The statistical analysis is performed using the Student's t-test and Pearson's correlation analysis.Maximal screw length increases from T9 to T12 and there are significant differences between girls and boys at T9, T10, T11, and T12 in majority of groups (P < 0.05). The maximal screw diameter and screw diameter increase from T9 to T12. The maximal screw diameter ranges from 6.27 mm to 10.20 mm, whereas the screw diameter ranges from 3.87 mm to 6.75 mm. Meanwhile, the maximum cephalad angle is 23.06° and the minimum is 13.11°. No statistically significant differences in the cephalad angle are found at all levels.Our study establishes the feasibility of 4.5 to 5.5 mm CBT screws fixation via pedicle or pedicle rib unit in the pediatric thoracic spine. The entry point of the pediatric thoracic CBT screws is 6 o'clock orientation of the pedicle. Findings of our study also provide insights into the screw insertion angle and screw size decision.

The radiologic assessment of posterior ligamentous complex injury in patients with thoracolumbar fracture.

PURPOSES: To discuss whether radiologic parameters are closely related to posterior ligamentous complex (PLC) injury identified by magnetic resonance imaging (MRI). METHODS: One hundred and five thoracolumbar fracture (T11-L2) patients were retrospectively analyzed in the study. The patients were divided into different groups by the status of the PLC on MRI: intact, incompletely ruptured and ruptured. The radiographic parameters included the anterior edge-inferior endplate angle (AEIEA), the anterior edge displacement (AED), the Cobb angle (CA), the region angle (RA), the sagittal index (SI), local kyphosis (LK), the anterior/posterior vertebral height ratio (A/P ratio), the anterior vertebral height ratio (AVH ratio), and bony fragment in front of the fractured vertebra (BFOFV). T test, Pearson's Chi-square and multivariate logistic regression were calculated for the variables. RESULTS: Supraspinous ligament (SSL) rupture versus intact was not only associated with the occurrence of AEIEA <70°, LK >25° and BFOFV, but also with increased AED (9.89 ± 3.12 mm and 9.34 ± 3.36 mm, P = 0.034), RA (9.52 ± 3.93° versus 7.91 ± 3.99°, P = 0.042), and LK (23.98 ± 5.88° versus 15.55 ± 5.28°, P = 0.021). The indications for interspinous ligament (ISL) injury included AEIEA <75°, AEIEA <70° (P = 0.004 and P < 0.001, respectively), increased AED (P = 0.010), LK >25° (P = 0.024), AVH (P < 0.001), and BFOFV (P < 0.001). Multivariate logistic regression analysis revealed that AEIEA <70° and BFOFV were high risk factors for SSL rupture [standard partial regression coefficients (betas) were 0.439 and 0.408, P = 0.003 and 0.001, respectively] and ISL rupture (betas were 0.548 and 0.494, P = 0.028 and 0.001, respectively). Increased AED and LK >25° were also related to either ISL rupture (P = 0.035 and 0.001, respectively) or SSL rupture (P = 0.014 and 0.008, respectively). CONCLUSION: Our data may prove useful in a preliminary assessment of the PLC integrity based on plain radiographic imaging. We show that radiologic indications, such as AEIEA <70°, BFOFV, LK >25°, and increased AED, are correlated with ISL or SSL rupture, while RA, CA, SI, A/P ratio, and AVH ratio are not.

Structure-Activated Copper Photosensitisers for Photocatalytic Water Reduction.

A series of phenanthroline-based ligands have been synthesised and their influence as bidentate nitrogen ligands in heteroleptic [Cu(P^P)(N^N)]+ photosensitisers in light-driven water reduction has been studied. In this noble-metal-free Cu-Fe-based photocatalytic water reduction system, the structural effects of the nitrogen ligands have been explored, including the steric and electronic effects of substituents at the 2,9- and 4,7-positions of phenanthroline. Ligands were prepared that led to increased hydrogen generation, with turnover numbers (TONCu ) of up to 1388 being observed. All the new complexes were electrochemically and photophysically characterised. We demonstrate for the first time that the presence of fluorine in nitrogen ligands increases the efficacy of copper complexes in photocatalytic hydrogen production.

Changes in Pelvic Incidence, Pelvic Tilt, and Sacral Slope in Situations of Pelvic Rotation.

STUDY DESIGN: Digitally reconstructed radiograph-based study. OBJECTIVE: Using a computer-based method to determine what degree of pelvic rotation is acceptable for measuring the pelvic incidence (PI), pelvic tilt (PT), and sacral slope (SS). The effectiveness of a geometrical formula used to calculate the angle of pelvic rotation proposed in a previous article was assessed. SUMMARY OF BACKGROUND DATA: It is unclear whether PI, PT, and SS are valid with pelvic rotation while acquiring a radiograph. MATERIALS AND METHODS: Ten 3-dimensionally reconstructed models were established with software and placed in a neutral orientation to orient all of the bones in a standing position. Next, 140 digitally reconstructed radiographs were obtained by rotating the models around the longitudinal axis of each pelvis in the software from 0 to 30 degrees at 2.5-degree intervals. PI, PT, and SS were measured. The rotation angle was considered to be acceptable when the change in the measured angle (compared with the "correct" position) was <6 degrees. The rotation angle (α) on the images was calculated by a geometrical formula. Consistency between the measured value and the set angle was assessed. RESULTS: The acceptable maximum angle of rotation for reliable measurements of PI was 17.5 degrees, and the changes in PT and SS were within an acceptable range (<6 degrees) when the pelvic rotation increased from 0 to 30 degrees. The effectiveness of the geometrical formula was shown by the consistency between the set and the calculated rotation angles of the pelvis (intraclass correlation coefficient=0.99). CONCLUSIONS: Our study provides insight into the influence of pelvic rotation on the PI, PT, and SS. PI changes with pelvic rotation. The acceptable maximum angle for reliable values of PI, PT, and SS was 17.5 degrees, and the rotation angle of the pelvis on a lateral spinopelvic radiograph can be calculated reliably.

A novel micro-CT-based method to monitor the morphology of blood vessels in the rabbit endplate.

PURPOSE: The aim of this study was to develop a novel method for observing the morphology of the blood vessels in the rabbit endplate. METHODS: Twenty 6-month-old rabbits were used in this study. The blood vessels in the L5 endplate in Group A were injected with iohexol and Group B with barium sulfate. Group C was the control group with saline. To optimize the study, Group B was divided into two subgroups: Group B-1 was injected with 100% (w/v) barium sulfate and Group B-2 with 50% (w/v). After injection, the L4-L5 vertebral body was excised and the cranial endplate of L5 was scanned using a micro-CT scanner. Models of the vertebral endplate and vessels were reconstructed using the 3D reconstruction software (Mimics 16.0) by calculating a bone threshold value, and then merged these two models to create a superimposed model. RESULTS: The 3D vessel models could not be created in Groups A and C, but they were clearly visualized in Group B. In the 3D model, the blood vessels extended from the subchondral bone to the endplate, and the density of the blood vessels in the area of the nucleus pulposus (NP) was higher than in the annulus fibrosus. CONCLUSIONS: The results of this study suggest that the blood vessels in the rabbit endplate can be clearly observed by the method described using barium sulfate [the 50% (w/v) gave better results compared with the 100% (w/v)]. The information from the 3D vessel structure could provide essential data to help us understand the nutrient pathways within the vertebral endplate.

Minimally invasive cortical bone trajectory screws placement via pedicle or pedicle rib unit in the lower thoracic spine: a cadaveric and radiographic study.

PURPOSE: To evaluate the feasibility of cortical bone trajectory (CBT) screws fixation via pedicle or pedicle rib unit in the cadaveric thoracic spine (T9-T12). METHODS: Computed tomography (CT) images of 100 patients are analyzed by multiplanar reconstruction. Ten cadaveric thoracic spines are used to insert 4.5 × 35.0 mm CBT screws at all levels from T9 to T12. RESULTS: Maximal screw length obtained by CT has a tendency to gradually increase from T9 (29.64 mm) to T12 (32.84 mm), and the difference reaches significant level at all levels except T9 versus T10 (P < 0.01). Maximal screw diameter increases from T9 (4.92 mm) to T12 (7.47 mm) and the difference reaches significant level among all levels (P < 0.01). Lateral angle increases from T9 (7.37°) to T12 (10.47°), and the difference reaches significant level among all levels except T11 versus T12. Cephalad angle from T9 to T12 are 19.03°, 22.10°, 25.62° and 27.50° (P < 0.01), respectively. The percentage of the inner and outer pedicle breakage are 2.5 and 22.5 %, respectively. The violation of lateral pedicle wall occurs at T9 and T10, especially for women at T9. CONCLUSIONS: Both radiographic and cadaveric studies establish the feasibility of CBT screws placement via pedicle or pedicle rib unit in the lower thoracic spine (T9-T12). Furthermore, our measurements are also useful for application of this technique.

Reamed versus unreamed intramedullary nailing for the treatment of femoral fractures: A meta-analysis of prospective randomized controlled trials.

BACKGROUND AND OBJECTIVE: Intramedullary nailing is commonly used for treating femoral shaft fractures, one of the most common long bone fractures in adults. The reamed intramedullary nail is considered the standard implant for femoral fractures. This meta-analysis was performed to verify the superiority of reamed intramedullary nailing over unreamed intramedullary nailing in fractures of the femoral shaft in adults. Subgroup analysis of implant failure and secondary procedure was also performed. METHODS: Electronic literature databases were used to identify relevant publications and included MEDLINE (Ovid interface), EMBASE (Ovid interface), and the Cochrane Central Register of Controlled Trials (CENTRAL; Wiley Online Library). The versions available on January 30, 2016, were utilized. Only human studies, which were designed as randomized controlled clinical trials, were included. Two authors independently evaluated the quality of original research publications and extracted data from the studies that met the criteria. RESULTS: Around 8 randomized controlled trials involving 1078 patients were included. Reamed intramedullary nailing was associated with shorter time to consolidation of the fracture (SMD = -0.62, 95% CI = -0.89 to -0.35, P < 0.00001), lower secondary procedure rate (OR = 0.25, 95% CI 0.10-0.62, P = 0.003), lower nonunion rate (OR = 0.14, 95% CI = 0.05-0.40, P < 0.01), and lower delayed-union rate (OR = 0.19, 95% CI = 0.07-0.49, P < 0.01) compared to unreamed intramedullary nailing. The 2 groups showed no significant differences in risk of implant failure (OR = 0.50, 95% CI 0.14-1.74, P = 0.27), mortality risk (OR = 0.94, 95% CI 0.19-4.68, P = 0.94), risk of acute respiratory distress syndrome (ARDS; OR = 1.55, 95% CI 0.36-6.57, P = 0.55), or blood loss (SMD = 0.57, 95% CI = -0.22 to 1.36, P = 0.15). CONCLUSION: Reamed intramedullary nailing is correlated with shorter time to union and lower rates of delayed-union, nonunion, and reoperation. Reamed intramedullary nailing did not increase blood loss or the rates of ARDS, implant failure, and mortality compared to unreamed intramedullary nailing. Therefore, the treatment of femoral fractures using reamed intramedullary nailing is recommended.

Risk factors of kyphosis recurrence after implant removal in thoracolumbar burst fractures following posterior short-segment fixation.

PURPOSE: Our aim was to evaluate the results of short-segment pedicle instrumentation with screw insertion in the fracture level and find factors predicting kyphosis recurrence in thoracolumbar burst fractures. METHODS: We retrospectively analysed 122 patients with thoracolumbar burst fracture who were divided into two groups: kyphosis recurrence and no kyphosis recurrence. Pre-operative radiographic data comprising Cobb angle (CA), regional angle, anterior vertebra height (AVH), upper intervertebral angle, vertebral wedge angle (VWA), pre-anteroposterior A/P approach, superior endplate fracture, load-sharing classification (LSC) score and clinical data including age, visual analogue scale (VAS) score, thoracolumbar injury classification and severity score were compared between groups. T test, Pearson's chi-square and multivariate logistic regression were calculated for variables. RESULTS: CA, VWA and AVH were significantly corrected after surgery. CA changed from 23.7 to 3.0 (p <0.001), VWA from 38.7 to 9.6 (p <0.001) and AVH from 48.8 % to 91.2 % (p <0.001). These parameters were well maintained during the follow-up period with a mild, tolerant loss of correction. Neurological function and pain were significantly improved without deterioration. Age, pre-A/P and pre-AVH < 50 % influenced kyphosis recurrence (p = 0.032, 0.026, 0.011, respectively). CONCLUSIONS: Short-segment pedicle instrumentation including the fractured vertebra was effective in treating thoracolumbar burst fractures. The loss of correction at follow-up after implant removal was associated with age, A/P ratio and anterior vertebral height < 50 %.

A Method to Prevent Occipitocervical Joint Violation Using Plain Radiography During Percutaneous Anterior Transarticular Screw Fixation.

STUDY DESIGN: A prospective study of anterior transarticular screw (ATS) fixation patients. OBJECTIVE: To develop a method to determine screw tip position through plain radiography after percutaneous ATS fixation to prevent occipitocervical joint (OCJ) violation. SUMMARY OF BACKGROUND DATA: No studies using plain radiography to prevent OCJ violation during percutaneous ATS fixation have been performed. METHODS: In total, 34 subjects (with 68 screws) who had undergone percutaneous ATS fixation were enrolled. To evaluate the screw tip location in relation to the C1 lateral mass (LM), the screw tip positions were graded 1, 2, or 3 on anteroposterior (AP) radiographs, and I, II, or III on lateral radiographs. OCJ violation was analyzed by postoperative computed tomography (CT). RESULTS: Screws with tips located lower (tip I) in the LM did not result in OCJ violation. Only one tip in the tip 3 position showed OCJ perforation, and this screw was also located in tip III. Screw perforation rates of tip 1-tip II, tip 1-tip III, and tip 2-tip III were the highest (100%), followed by tip 2-tip II (10.5%) and tip3-tip III (10%). CONCLUSION: This study provides insights into OCJ violation during percutaneous ATS fixation. According to AP radiography, a percutaneous ATS with the screw tip located in the lateral part of the LM resulted in a lower rate of OCJ perforation, whereas screws located in the medial LM resulted in the highest rate of perforation. Percutaneous ATS with the screw tip located in the neutral part of the LM should ensure that the screw tip is below the upper part of the LM, preventing OCJ violation. These findings may help surgeons assess screw positioning both during and after the operation. LEVEL OF EVIDENCE: 3.

The relationship between weight change and risk of hip fracture: meta-analysis of prospective studies.

The relationship between weight change and risk of hip fracture is still controversial. We searched PubMed and Embase for studies on weight change and risk of hip fracture. Eight prospective studies were included. The weight loss studies included 85592 participants with 1374 hip fractures, and the weight gain studies included 80768 participants with 732 hip fractures. Weight loss is more likely a risk factor of hip fracture, with an adjusted RR (Relative Risk) (95% CI) of 1.84 (1.45, 2.33). In contrast, weight gain can decrease the risk of hip fracture, with an adjusted RR (95% CI) of 0.73 (0.61, 0.89). Dose-response meta-analysis shows that the risk of hip fracture is an ascending curve, with an increase of weight loss above the line of RR = 1; this trend is consistent with the results of forest plots that examine weight loss and hip fracture. For weight gain and risk of hip fracture, the descending curve below the line of RR = 1; this trend is consistent with the results of forest plots that examine weight gain and hip fracture. Our meta-analysis suggests that weight loss may be a risk factor for hip fracture and that weight gain may be a protective factor for hip fracture.

Minimum 4-year outcomes of cervical total disc arthroplasty versus fusion: a meta-analysis based on prospective randomized controlled trials.

The prevalence of cervical disc disease is high, and the traditional surgical method of anterior cervical discectomy and fusion (ACDF) carries with it the disadvantages of motion loss at the operated level, and accelerated adjacent level disc degeneration. Preliminary results of the efficacy and reoperative rate comparing TDA versus ACDF have been reported; however, the long-term outcomes of TDA versus ACDF still remain a topic of debate. This review was prepared following the standard procedures set forth by the Cochrane Collaboration organization, and preferred reporting items for systematic reviews and meta-analyses (PRISMA). The only studies included were randomized controlled trials with a minimum of 4 years of follow-up data. The meta-analysis included the neck disability index (NDI), visual analog scale (VAS) of neck and arm pain, SF-36 physical component scores (SF-36 PCS), over success, neurological success, work status, implant-related complications, and secondary surgery events. Four randomized controlled trials meet the inclusion criteria. The long-term improvement of NDI, VAS of neck and arm pain, SF-36 PCS, over success, and neurological success favored the TDA group. The TDA group also had a lower incidence of secondary surgery for both the index level (RR: 0.45 [0.28, 0.72]) and adjacent level (RR: 0.53 [0.33, 0.88]). In this meta-analysis of 4 included RCTs with a minimum 4 years of follow-ups, total disc arthroplasty showed improvements over ACDF as measured by the NDI, VAS of neck and arm pain, and SF-36 PCS.

A Computed Tomographic Morphometric Study of the Pediatric Occipital Bone Thickness: Implications for Pediatric Occipitocervical Fusion.

STUDY DESIGN: This study is a computed tomographic-based morphometric analysis of the pediatric occipital bones as related to pediatric occipitocervical fusion. OBJECTIVE: To quantify reference data concerning the thicknesses of the immature occipital bones to guide the pediatric occipitocervical fusion. SUMMARY OF BACKGROUND DATA: To the best of our knowledge, no published study has provided insight into the thicknesses of pediatric occiputs with different age groups. METHODS: 80 pediatric patients were divided into 4 age groups, and their occiputs were studied on Philips Brilliance 256 iCT scan. RESULTS: The mean thickness ± standard deviations of the pediatric occipital bones with different age groups is shown. The median and the paramedian regions are always thicker than the more lateral regions at each age group and the thickest point in the occiputs is mostly at the external occipital protuberance. The mean thickness of occiputs showed an obvious significant difference between each 2 age groups and no significant difference between male and female in different age groups except the group 4. CONCLUSION: Our investigation provides insight into the anatomy of occiputs in pediatric population and preoperative CT evaluation must be required to further decrease the risk of occipitocervical fusion.