C(sp)-C(sp) Lever-Based Targets of Orientational Chirality: Design and Asymmetric Synthesis.

In this study, the design and asymmetric synthesis of a series of chiral targets of orientational chirality were conducted by taking advantage of N-sulfinylimine-assisted nucleophilic addition and modified Sonogashira catalytic coupling systems. Orientational isomers were controlled completely using alkynyl/alkynyl levers [C(sp)-C(sp) axis] with absolute configuration assignment determined by X-ray structural analysis. The key structural element of the resulting orientational chirality is uniquely characterized by remote through-space blocking. Forty examples of multi-step synthesis were performed, with modest to good yields and excellent orientational selectivity. Several chiral orientational amino targets are attached with scaffolds of natural and medicinal products, showing potential pharmaceutical and medical applications in the future.

Design and Asymmetric Control of Orientational Chirality by Using the Combination of C(sp2)-C(sp) Levers and Achiral N-Protecting Group.

New chiral targets of orientational chirality have been designed and asymmetrically synthesized by taking advantage of N-sulfinyl imine-directed nucleophilic addition/oxidation, Suzuki-Miyaura, and Sonogashira cross-coupling reactions. Orientation of single isomers has been selectively controlled by using aryl/alkynyl levers [C(sp2)-C(sp) axis] and tBuSO2- protecting group on nitrogen as proven by X-ray diffraction analysis. The key structural characteristic of resulting orientational products is shown by remote through-space blocking manner. Seventeen examples of multi-step synthesis were obtained with modest to good chemical yields and complete orientational selectivity.

Aggregation-Induced Catalysis: Asymmetric Catalysis with Chiral Aggregates.

So far, there have been 4 methods to control chirality including the use of chiral auxiliaries, reagents, solvents, and catalysts documented in literature and textbooks. Among them, asymmetric catalysts are normally divided into homogeneous and heterogeneous catalysis. In this report, we present a new type of asymmetric control-asymmetric catalysis via chiral aggregates that would not belong to the above categories. This new strategy is represented by catalytic asymmetric dihydroxylation reaction of olefins in which chiral ligands are aggregated by taking advantage of typical aggregation-induced emission systems containing tetrahydrofuran and H2O cosolvents. It was proven that the chiral induction can be enhanced from er of 78:22 to 97:3 simply by changing the ratios of these 2 cosolvents. The formation of chiral aggregates of asymmetric dihydroxylation ligands, (DHQD)2PHAL and (DHQ)2PHAL, has been proven by aggregation-induced emission and a new analytical tool-aggregation-induced polarization established by our laboratory. In the meanwhile, chiral aggregates were found to be formed either by adding NaCl into tetrahydrofuran/H2O systems or by increasing concentrations of chiral ligands. The present strategy also showed promising reverse control of enantioselectivity in the Diels-Alder reaction. This work is anticipated to be extended broadly to general catalysis, especially to asymmetric catalysis in the future.

Aggregation-induced polarization (AIP) of derivatives of BINOL and BINAP.

The relationship between optical rotations of small chiral molecules with water% in THF has been established. The typical aggregation co-solvent systems resulted in optical rotation amplification and adjustment, defined as aggregation-induced polarization (AIP). The AIP work can serve as a new tool to determine molecular aggregation, especially for those that cannot display aggregation-induced emission (AIE). Therefore, AIP and AIE are anticipated to complement each other. In addition, AIP can also serve as a new transmission tool providing adjusting right- or left-hand polarized lights of a series of individual wavelengths. Since chiral phosphine derivatives are among the most important ligands, this work would benefit research using chiral aggregates to control asymmetric synthesis and catalysts. Therefore, it will find many applications in chemical and materials sciences.

Aggregation-Induced Synthesis (AIS): Asymmetric Synthesis via Chiral Aggregates.

A new chiral aggregate-based tool for asymmetric synthesis has been developed by taking advantage of chiral aggregates of GAP (Group-Assisted Purification) reagents, N-phosphonyl imines. This tool was proven to be successful in the asymmetric GAP synthesis of functionalized 2,3-dihydrobenzofurans by reacting salicyl N-phosphonyl imines with dialkyl bromomalonates in various cosolvent systems. The chiral induction can be controlled by differentiating between two asymmetric directions simply by changing the ratios of cosolvents which are commonly adopted in AIE (aggregation-induced emission) systems. The formation of chiral aggregates was witnessed by a new analytical tool-aggregation-induced polarization (AIP). The present synthetic method will be broadly extended for general organic synthesis, particularly, for asymmetric synthesis and asymmetric catalysis in the future.

Aggregation-Induced Polarization (AIP): Optical Rotation Amplification and Adjustment of Chiral Aggregates of Folding Oligomers and Polymers.

The phenomenon of aggregation-induced polarization (AIP) was observed showing optical rotation amplification and adjustment. The relationship between optical rotations of chiral aggregates of multilayered chiral folding oligomers and polymers with water% in THF (f w) has been established accordingly. New multilayered chiral oligomers were synthesized under the asymmetric catalytic systems established by our laboratory recently. These products were well-characterized by UV-vis, NMR, and MALDI-TOF spectra. Absolute stereochemistry (enantio- and diastereochemistry) was assigned by comparison with similar asymmetric induction by the same catalyst in our previous reactions. The present AIP work can serve as a new tool to determine chiral aggregates, especially for those that cannot display emission. AIP would also complement AIE-based CPL since AIP serves as a new tool providing enhanced right- or left-hand polarized lights with individual wavelengths. It will find many applications in chemical and materials science in the future.

Central-to-Folding Chirality Control: Asymmetric Synthesis of Multilayer 3D Targets With Electron-Deficient Bridges.

New multilayer 3D chiral molecules have been designed and synthesized asymmetrically through the strategy of center-to-multilayer folding chirality control and double Suzuki couplings. Individual diastereoisomers were readily obtained and separated via flash column chromatography. The key diastereoisomer was further converted into corresponding enantiomers. These enantiomers possess electron-deficient aromatic bridges layered with top and bottom aromatic scaffolds. X-ray structural analysis has unambiguously confirmed the configuration, and intermolecular packing results in regular planar patterns in solid crystals. The synthesis was achieved in a total of ten steps starting from commercially available starting materials.

From Center-to-Multilayer Chirality: Asymmetric Synthesis of Multilayer Targets with Electron-Rich Bridges.

Asymmetric synthesis of new atropisomerically multilayered chiral targets has been achieved by taking advantage of the strategy of center-to-multilayer chirality and double Suzuki-Miyaura couplings. Diastereomers were readily separated via flash column chromatography and well characterized. Absolute configuration assignment was determined by X-ray structural analysis. Five enantiomerically pure isomers possessing multilayer chirality were assembled utilizing anchors involving electron-rich aromatic connections. An overall yield of 0.69% of the final target with hydroxyl attachment was achieved over 11 steps from commercially available starting materials.

Multilayer 3D Chiral Folding Polymers and Their Asymmetric Catalytic Assembly.

A novel class of polymers and oligomers of chiral folding chirality has been designed and synthesized, showing structurally compacted triple-column/multiple-layer frameworks. Both uniformed and differentiated aromatic chromophoric units were successfully constructed between naphthyl piers of this framework. Screening monomers, catalysts, and catalytic systems led to the success of asymmetric catalytic Suzuki-Miyaura polycouplings. Enantio- and diastereochemistry were unambiguously determined by X-ray structural analysis and concurrently by comparison with a similar asymmetric induction by the same catalyst in the asymmetric synthesis of a chiral three-layered product. The resulting chiral polymers exhibit intense fluorescence activity in a solid form and solution under specific wavelength irradiation.

Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Invited for the cover of this issue are Guigen Li's groups at Texas Tech University and Nanjing University. The cover artwork shows that chirality patterns exist from universal to molecular levels showing light emission properties. Read the full story of multilayer 3D chirality and its asymmetric catalytic synthesis at 10.1002/chem.202104102.

Asymmetric Catalytic Assembly of Triple-Columned and Multilayered Chiral Folding Polymers Showing Aggregation-Induced Emission (AIE).

Unprecedented chiral multilayer folding 3D polymers have been assembled and regulated by uniform and differentiated aromatic chromophore units between naphthyl piers. Screening catalysts, catalytic systems and monomers were proven to be crucial for asymmetric catalytic Suzuki-Miyaura polycouplings for this assembly. X-ray crystallography of the corresponding dimers and trimers revealed the absolute configuration and the intermolecular packing pattern. Up to 61 960 Mw /41 900 Mn and m/z 4317 for polymers and oligomers, as confirmed by gel permeation chromatography (GPC) and MALDI-TOF MS, indicated that these frameworks were composed of multiple stacked layers. The resulting multiple π-assemblies exhibited remarkable optical properties in aggregated states (photoluminescence in solids and aggregation-induced emission in solutions), as well as reversible redox properties in electrochemical performance.

A new chiral phenomenon of orientational chirality, its synthetic control and computational study.

A new type of chirality, orientational chirality, consisting of a tetrahedron center and a remotely anchored blocker, has been discovered. The key structural element of this chirality is characterized by multiple orientations directed by a through-space functional group. The multi-step synthesis of orientational chiral targets was conducted by taking advantage of asymmetric nucleophilic addition, Suzuki-Miyaura cross-coupling and Sonogashira coupling. An unprecedented catalytic species showing a five-membered ring consisting of C (sp2)-Br-Pd-C (sp2) bonds was isolated during performing Suzuki-Miyaura cross-coupling. X-ray diffraction analysis confirmed the species structure and absolute configuration of chiral orientation products. Based on X-ray structures, a model was proposed for the new chirality phenomenon to differentiate the present molecular framework from previous others. DFT computational study presented the relative stability of individual orientatiomers. This discovery would be anticipated to result in a new stereochemistry branch and to have a broad impact on chemical, biomedical, and material sciences in the future.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

Invited for the cover of this issue is Guigen Li and co-workers at Texas Tech University and Nanjing University. The cover artwork shows that chirality phenomena exists in the universe and in nature, including at micro and molecular levels. Read the full text of the article at 10.1002/chem.202100700.

Asymmetric Catalytic Approach to Multilayer 3D Chirality.

The first asymmetric catalytic approach to multilayer 3D chirality has been achieved by using Suzuki-Miyaura cross-couplings. New chiral catalysts were designed and screened under various catalytic systems that proved chiral amide-phosphines to be more efficient ligands than other candidates. The multilayer 3D framework was unambiguously determined by X-ray structural analysis showing a parallel pattern of three layers consisting of top, middle and bottom aromatic rings. The X-ray structure of a catalyst complex, dichloride complex of Pd-phosphine amide, was obtained revealing an interesting asymmetric environment nearby the Pd metal center. Three rings of multilayer 3D products can be readily changed by varying aromatic ring-anchored starting materials. The resulting multilayer products displayed strong luminescence under UV irradiation and strong aggregation-induced emission (AIE). In the future, this work would benefit not only the field of asymmetric synthesis but also materials science, in particular polarized organic electronics, optoelectronics and photovoltaics.

Triple-Columned and Multiple-Layered 3D Polymers: Design, Synthesis, Aggregation-Induced Emission (AIE), and Computational Study.

Conjugated polymers and oligomers have great potentials in various fields, especially in materials and biological sciences because of their intriguing electronic and optoelectronic properties. In recent years, the through-space conjugation system has emerged as a new assembled pattern of multidimensional polymers. Here, a novel series of structurally condensed multicolumn/multilayer 3D polymers and oligomers have been designed and synthesized through one-pot Suzuki polycondensation (SPC). The intramolecularly stacked arrangement of polymers can be supported by either X-ray structural analysis or computational analysis. In all cases, polymers were obtained with modest to good yields, as determined by GPC and 1H-NMR. MALDI-TOF analysis has proven the speculation of the step-growth process of this polymerization. The computational study of ab initio and DFT calculations based on trimer and pentamer models gives details of the structures and the electronic transition. Experimental results of optical and AIE research confirmed by calculation indicates that the present work would facilitate the research and applications in materials.

Copper-catalyzed direct amination of benzylic hydrocarbons and inactive aliphatic alkanes with arylamines.

A new synthetic method toward direct C-N bond formation through saturated C-H amination of benzylic hydrocarbons and inactive aliphatic alkanes with primary aromatic amines under an inexpensive catalyst/oxidant (Cu/DTBP) system has been developed. Both aminopyridines and anilines could react smoothly with primary and secondary benzylic C-H substrates or cyclohexane to form the corresponding aromatic secondary amines in moderate to good yields. This protocol has the advantages of wide functional group tolerance and use of readily available raw materials.

Peroxide-mediated site-specific C-H methylation of imidazo[1,2-a]pyridines and quinoxalin-2(1H)-ones under metal-free conditions.

An effective approach to realize the direct methylation of imidazo[1,2-a]pyridines and quinoxalin-2(1H)-ones with peroxides under metal-free conditions is described. In this protocol, peroxides serve as both the radical initiator and methyl source. Methylated imidazopyridines and quinoxalin-2(1H)-ones were smoothly synthesized in moderate to good yields. A free radical reaction mechanism was proposed to describe the methylation process.

Metal-Free Site-Specific Hydroxyalkylation of Imidazo[1,2- a]pyridines with Alcohols through Radical Reaction.

An effective approach to realize the direct hydroxyalkylation of imidazo[1,2- a]pyridines with alcohols promoted by di- tert-butyl peroxide was described without any metal catalyst. It is the first time that the dehydrogenative C(sp3)-C(sp2) coupling of imidazo[1,2- a]pyridines with alcohols occurred regioselectively at the C-5 position of imidazo[1,2- a]pyridines. Multisubstituted imidazopyridine derivatives were smoothly synthesized in moderate to good yields. Through a series of control experiments, a free-radical pathway was proposed to explain the experiment.

Transition Metal-Free Cross-Dehydrogenative Coupling Reaction of Coumarins with Acetonitrile or Acetone.

A transition metal-free cross-dehydrogenative coupling of coumarins with acetonitrile or acetone has been established. A series of coumarins were subjected to reaction with acetonitrile or acetone in the presence of tert-butyl benzoperoxoate and potassium fluoride for direct synthesis of 3-cyanomethyl (or acetomethyl) coumarins. The method exhibits good functional group tolerance, and desired products were obtained in moderate to good yields. Meanwhile, a radical pathway was proposed to describe the cross-dehydrogenative coupling of coumarins with acetonitrile.