Exploring the Effects of 630 nm Wavelength of Light-Emitting Diode Irradiation on the Proliferation and Migration Ability of Human Biceps Tendon Fibroblast Cells

Background@#Light-emitting diode (LED)-based photobiomodulation is used as an inducer of cell regeneration. Although numerous in vitro and in vivo orthopedic studies have been conducted, the ideal LED wavelength range for tendon healing has not yet been determined. This study, thus, focused on the effects of LED of a 630 nm wavelength on the cell viability, proliferation, and migration of human biceps tendon fibroblast cells. @*Methods@#Human tendon fibroblast cell culture was performed using the biceps tendon of patients who had undergone biceps tenodesis. Human biceps tendon fibroblasts from two patients (male, aged 42 and 69 years) were isolated and cultured. The cell type was confirmed by a morphological analysis and using tendon and fibroblast specific markers. They were then split into three groups, with each receiving a different irradiation treatment: no LED treatment (control), 630 nm LED, and 630 nm + 880 nm LED for 20 minutes each. After the LED treatment, cell viability, proliferation, and migration assays were performed, and the results were compared between the groups. @*Results@#Twenty-four hours after LED treatment, cell viability and proliferation were significantly increased in the 630 nm LED and 630 nm + 880 nm LED treatment groups compared to that in the control group (p < 0.05). Under the same conditions, compared with the control group, the 630 nm LED alone treatment group showed a 3.06 ± 0.21 times higher cell migration rate (p < 0.05), and the 630 nm + 880 nm LED combination treatment group showed a 2.88 ± 0.20 times higher cell migration rate (p < 0.05) in threedimensional migration assay. @*Conclusions@#In human tendon fibroblast cells, 20 minutes of LED treatment at 630 nm and 630 nm + 880 nm exhibited significant effects on cell proliferation and migration. Our findings suggest the potential of LED therapy as an adjuvant treatment for tendon healing, and hence, further research is warranted to standardize the various parameters to further develop and establish this as a reliable treatment regimen.

Characteristics of Defecation Function Related Quality of Life According to Cancer Location in Colorectal Cancer Survivors

Purpose@#The purpose of this study is to explore defecation functions related quality of life (QoL) according to the location of cancer in colorectal cancer survivors. @*Methods@#A total of 120 colorectal cancer survivors (67 colon vs. 53 rectum, mean age: 55.3±10.3 years, 46.7% male) who completed treatment were recruited from a tertiary hospital. QoL and defecation function related QoL were surveyed using the European Organization for Research and Treatment of Cancer (EORTC QLQ-C30) and EORTC QLQ- colorectal cancer specific core (CR29) questionnaire. Physical activity (PA) levels of participants were surveyed using a global PA questionnaire. @*Results@#There was no statistical difference in general QoL according to the location of cancer, but significant differences were observed in defecation function related QoL. When cancer location is closer to the anus, survivors experience more defecation dysfunction, negatively associated with QoL (Hemicolectomy: 67.71±14.07, anterior resection: 92.22±15.18, lower anterior resection: 151.85±17.20, and ultra-low anterior resection: 263.73±42.69). @*Conclusion@#When location of cancer is closer to the anus, colorectal survivors experience significantly more defecation dysfunction and poorer QoL. Strategies to reduce defecation dysfunction according to the location of cancer among colorectal cancer patients should be developed.

Transfer anxiety in parents of children transferred from pediatric intensive care units to general wards in South Korea: a hybrid concept analysis

Purpose@#This study aimed to analyze the concept of transfer anxiety in parents of children transferred from pediatric intensive care units to general wards. @*Methods@#The hybrid model by Schwarz-Barcott and Kim was used to analyze the characteristics of transfer anxiety in parents of children transferred from pediatric intensive care units to general wards. @*Results@#Transfer anxiety was defined by the following attributes: 1) stress concerning the adaptation process, 2) concern about the child’s condition worsening due to the parent’s caregiving, and 3) involuntary changes in daily life due to the treatment. Transfer anxiety has the following antecedents: 1) uncertainty; 2) a lack of knowledge about the illness, medical devices, and caregiving; and 3) a lack of social support. It resulted in 1) caregiver burden, 2) a decrease in the capacity for coping with caregiving, 3) delays in the child’s physical and psychological recovery, and 4) decreased quality of life. @*Conclusion@#It is necessary to develop an assessment scale that considers the attributes of transfer anxiety in parents of children transferred from pediatric intensive care units to general wards. Furthermore, an effective nursing intervention should be developed to reduce transfer anxiety.

Intramedullary Stabilization Technique Using Headless Compression Screws for Distal Ulnar Fractures

Distal ulnar fractures are commonly accompanied by distal radial fractures, and several treatment options such as plate osteosynthesis and pinning with Kirschner's wires are used. In this study, we present a technique using headless compression screws to achieve bony union of distal ulnar fractures. From November 2016 to November 2018, we treated 11 patients with distal ulnar fractures combined with distal radial fractures with headless compression screws (DePuy Synthes). Patients were instructed to maintain a short-arm splint for less than two weeks after the treatment. The mean time to bony union was 6.5 weeks, mean Quick Disabilities of the Arm, Shoulder, and Hand score was 14.6 points, and mean visual analog scale score was 1.09 points. Full range of motion was possible in all directions after surgery and no specific complications were observed. The suggested technique allows minimal incision and minimally invasive intramedullary fixation and can promote bony union in a simple way without specific complications.

Posterior condylar offset changes and its effect on clinical outcomes after posteriorsubstituting, fixed-bearing total knee arthroplasty: anterior versus posterior referencing

Background@#We sought to determine whether there was a difference in the posterior condylar offset (PCO), posterior condylar offset ratio (PCOR) and clinical outcomes following total knee arthroplasty (TKA) with anterior referencing (AR) or posterior referencing (PR) systems. We also assessed whether the PCO and PCOR changes, as well as patient factors were related to range of motion (ROM) in each referencing system. @*Methods@#This retrospective study included 130 consecutive patients (184 knees) with osteoarthritis who underwent primary posterior cruciate ligament (PCL)-substituting fixed-bearing TKA. The difference between preoperative and postoperative PCO and PCOR values were calculated. Clinical outcomes including ROM and Western Ontario and McMaster University (WOMAC) scores were evaluated. Furthermore, multiple linear regression analysis was performed to determine the factors related to postoperative ROM in each referencing system. @*Results@#The postoperative PCO was greater in the AR group (28.4 mm) than in the PR group (27.4 mm), whereas the PCO was more consistently preserved in the PR group. The mean postoperative ROM after TKA was greater in the AR group (129°) than in the PR group (122°), whereas improvement in WOMAC score did not differ between the two groups. Preoperative ROM was the only factor related to postoperative ROM in both groups. @*Conclusions@#There was no difference in postoperative PCO in AR and PR group and the PCO was not associated with postoperative ROM. PCO was more consistently preserved after surgery in the PR group. The postoperative PCO and PCOR changes did not affect the postoperative ROM. Furthermore, similar clinical outcomes were achieved in the AR and PR groups.

The Innervated Distally Based First Dorsal Metatarsal Artery Flap with a Wide Pedicle for Reconstruction of a Great Toe Defect

BACKGROUND: It is difficult for surgeons to reconstruct soft tissue defects of the great toe. This report aims to evaluate the utility and efficacy of innervated distally based first dorsal metatarsal artery (FDMA) flap with a wide pedicle for reconstruction of soft tissue defects of the great toe. METHODS: This is a retrospective report. Between January 2015 and December 2017, six cases of skin defect of the great toe were reconstructed with an innervated distally based FDMA flap with a wide pedicle. One case was excluded in this report because of chronic pain on the metatarsophalangeal joint due to osteoarthritis before the injury. A total of five cases were evaluated for flap survival and sensory recovery. The sensory recovery was investigated by two-point discrimination and Semmes-Weinstein monofilament tests. The average age of the selected patients was 40 years (range, 36 to 56 years), and the average size of the defect in the toe was 8.3 cm2 (range, 4 to 13.8 cm2). The average follow-up period was 29.4 months (range, 18 to 38 months). RESULTS: All patients survived without any complications. The average two-point discrimination test value was 8.0 ± 0.89 mm (range, 7 to 9 mm), and the average value obtained from the Semmes-Weinstein monofilament test was 4.53 ± 0.33 (range, 4.17 to 4.93). The average residual pain score evaluated with a visual analog scale was 1 (range, 0 to 2). Two patients complained of stiffness in the great toe below 30° of total range of motion during the early stages after surgery, but this stiffness gradually improved after rehabilitation. The average range of motion of three patients with a remaining metatarsophalangeal joint after surgery was 80° (range, 70° to 90°). All five cases could walk regularly without any unique footwear at the final follow-up. CONCLUSIONS: The innervated distally based FDMA flap with a wide pedicle could be a good alternative method for repair of soft tissue defects of the great toe.

A wearable robotic orthosis with a spring-assist actuator.

This paper introduces a wearable robotic orthosis with spring-assist actuators, which is designed to assist people who have difficulty in walking. The spring-assist actuator consists of an electrical motor and a spring, which are attached to a rotational axis in parallel to each other. The spring-assist actuator is developed based on the analysis on the stiffness of the knee and hip joints during walking. "COWALK-Mobile," which is a wearable robotic orthosis, is developed using the spring-assist actuators to reduce the required motor torque during walking. The COWALK-Mobile has active hip and knee joints and passive ankle joints to provide assistive torque to the wearer. The required joint torque is generated by the spring as well as the electrical motor, which results in a decrease of maximum required torque for the motor. In order to evaluate the performance of the spring-assist actuator, experiments are carried out. The experiments show that the spring-assist actuators reduced the required motor torque during walking.

Effects of health and safety problem recognition on small business facility investment

OBJECTIVES: This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. METHODS: An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. RESULTS: Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. CONCLUSIONS: Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.