Efficacy of Cucurmin and Aloevera Extracts Gel as Local Drugs Delivery Agents.

Introduction: The usage of antimicrobials as local drug delivery (LDD) agents in the treatment of periodontitis has posed limitations due to the development of bacterial resistance, high cost, and unavailability, thus indicating the need for safer and economic alternatives. Methodology: A split-mouth randomized clinical trial was carried out on 10 patients. Three sites in different quadrants were assigned, treatment modality of scaling and root planing (SRP) alone, SRP with LDD of curcumin gel, and SRP with LDD of 99% pure aloe vera gel, respectively. Clinical parameters were recorded at baseline and on 30th day postoperatively. Results: Curcumin and aloe vera in addition to SRP demonstrated improvements in clinical parameters, though 99% aloe vera extract produced more statistically significant results when used as an LDD agent, as shown in intergroup comparisons for changes in periodontal parameters. Conclusion: Curcumin 10mg (Curenext) and 99% aloe vera extract as LDD along with regular mechanical debridement is a promising therapy in the treatment of chronic periodontitis.

Knowledge and Perception about Dental Implant and Its Complications among Dental and Medical Students-A Comparative Observational Survey.

Introduction: As dental implants become more widely used, there is a need to raise awareness about their potential complications. Professionals in the dental and medical fields must take responsibility for educating the public, and future professionals in these fields will play a key role in this effort. Methodology: Dental and medical students were polled through online questionnaire, with questions posed in multiple-choice format, to gauge their knowledge of dental implants. Result: When medical students were compared with dental students, it concluded that the dental students have more knowledge about implants and its complication. Conclusion: The statistical analysis revealed that the knowledge about basics of implantology and implant complications was good amongst dental students than medical students which was statistically significant.

Graphene woven fabric-polydimethylsiloxane piezoresistive films for smart multi-stimuli responses.

The outstanding properties of graphene, including its electromechanical property, could be engineered for wearable electronic sensor platforms. The tubular graphene weaved into a mesh or graphene woven fabrics (GWF) has been reported as one of the most sensitive materials for deformation detection, as well as a promising temperature sensor. Herein, we present the performance of our developed flexible, stretchable, and multiple sensitive sensors fabricated from GWF embedded in polydimethylsiloxane (PDMS) film substrate. The GWF/PDMS sensor shows a pressure sensitivity of 0.0142 kPa-1 in a wide linearity range of 0-20 kPa, an outstanding Gauge factor (GF) of 582 at a strain of 6.2 %, and a very high positive sensitivity of 0.0238 °C-1 in the temperature range of 25-80 °C. A practical application as a high sensitivity air pressure sensor able to measure low pressures (in the range of Pa to kPa) was also demonstrated. This sensor platform having desirable performance characteristics is an excellent candidate for wearable devices in the healthcare sector.

Targeting Artemisinin-Resistant Malaria by Repurposing the Anti-Hepatitis C Virus Drug Alisporivir.

The emergence of Plasmodium falciparum resistance raises an urgent need to find new antimalarial drugs. Here, we report the rational repurposing of the anti-hepatitis C virus drug, alisporivir, a nonimmunosuppressive analog of cyclosporin A, against artemisinin-resistant strains of P. falciparum. In silico docking studies and molecular dynamic simulation predicted strong interaction of alisporivir with PfCyclophilin 19B, confirmed through biophysical assays with a Kd value of 354.3 nM. Alisporivir showed potent antimalarial activity against chloroquine-resistant (PfRKL-9 with resistance index [Ri] 2.14 ± 0.23) and artemisinin-resistant (PfKelch13R539T with Ri 1.15 ± 0.04) parasites. The Ri is defined as the ratio between the IC50 values of the resistant line to that of the sensitive line. To further investigate the mechanism involved, we analyzed the expression level of PfCyclophilin 19B in artemisinin-resistant P. falciparum (PfKelch13R539T). Semiquantitative real-time transcript, Western blot, and immunofluorescence analyses confirmed the overexpression of PfCyclophilin 19B in PfKelch13R539T. A 50% inhibitory concentration in the nanomolar range, together with the targeting of PfCyclophilin 19B, suggests that alisporivir can be used in combination with artemisinin. Since artemisinin resistance slows the clearance of ring-stage parasites, we performed a ring survival assay on artemisinin-resistant strain PfKelch13R539T and found significant decrease in parasite survival with alisporivir. Alisporivir was found to act synergistically with dihydroartemisinin and increase its efficacy. Furthermore, alisporivir exhibited antimalarial activity in vivo. Altogether, with the rational target-based Repurposing of alisporivir against malaria, our results support the hypothesis that targeting resistance mechanisms is a viable approach toward dealing with drug-resistant parasite.

Dependence of Precursor Graphite Flake Size on Nitrogen Doping in Graphene Oxide and Its Effect on OER Catalytic Activity.

We report the synthesis of nitrogen-doped graphene oxide, with 5.7-7.0 wt % nitrogen doping, from different sizes of precursor graphite and study its effect on the oxygen evolution reaction (OER) activity of IrO2 in an acidic medium. The nitrogen-doped supports are expected to have pyridinic, pyrrolic, and graphitic functionalities at different ratios responsible for their improved performance. The N-doped supports and catalysts are synthesized via pyrolysis and the hydrothermal method using natural and synthetic graphite of three different flake sizes and evaluated for their structural and electrochemical characteristics. The average size of IrO2 nanoparticles deposited on the N-doped supports is independent of the flake size and doping amount of nitrogen. The catalysts show optimum current densities but improved stability with increasing flake sizes of 7, 20, and 125 µm. Our results demonstrate that the selection of the flake size of the doped support is necessary to achieve durable catalysts for the OER in an acidic medium.

Host SUMOylation Pathway Negatively Regulates Protective Immune Responses and Promotes Leishmania donovani Survival.

SUMOylation is one of the post-translational modifications that have recently been described as a key regulator of various cellular, nuclear, metabolic, and immunological processes. The process of SUMOylation involves the modification of one or more lysine residues of target proteins by conjugation of a ubiquitin-like, small polypeptide known as SUMO for their degradation, stability, transcriptional regulation, cellular localization, and transport. Herein, for the first time, we report the involvement of the host SUMOylation pathway in the process of infection of Leishmania donovani, a causative agent of visceral leishmaniasis. Our data revealed that infection of L. donovani to the host macrophages leads to upregulation of SUMOylation pathway genes and downregulation of a deSUMOylating gene, SENP1. Further, to confirm the effect of the host SUMOylation on the growth of Leishmania, the genes associated with the SUMOylation pathway were silenced and parasite load was analyzed. The knockdown of the SUMOylation pathway led to a reduction in parasitic load, suggesting the role of the host SUMOylation pathway in the disease progression and parasite survival. Owing to the effect of the SUMOylation pathway in autophagy, we further investigated the status of host autophagy to gain mechanistic insights into how SUMOylation mediates the regulation of growth of L. donovani. Knockdown of genes of host SUMOylation pathway led to the reduction of the expression levels of host autophagy markers while promoting autophagosome-lysosome fusion, suggesting SUMOylation-mediated autophagy in terms of autophagy initiation and autophagy maturation during parasite survival. The levels of reactive oxygen species (ROS) generation, nitric oxide (NO) production, and pro-inflammatory cytokines were also elevated upon the knockdown of genes of the host SUMOylation pathway during L. donovani infection. This indicates the involvement of the SUMOylation pathway in the modulation of protective immune responses and thus favoring parasite survival. Taken together, the results of this study indicate the hijacking of the host SUMOylation pathway by L. donovani toward the suppression of host immune responses and facilitation of host autophagy to potentially facilitate its survival. Targeting of SUMOylation pathway can provide a starting point for the design and development of novel therapeutic interventions to combat leishmaniasis.

In situ electrochemical Raman investigation of charge storage in rGO and N-doped rGO.

In this study, in situ electrochemical Raman spectroscopy was applied to clarify the charge storage mechanism in three types of anodes, synthetic graphite, reduced graphene oxide (rGO), and nitrogen-doped reduced graphene oxide (N-rGO). The Li+ intercalation phenomenon was measured in LiPF6 electrolyte solution using a modified coin cell setup. The synthetic graphite anode showed the splitting of the G peak at the potential E < 0.2 V vs. Li/Li+, corresponding to the formation of a graphite intercalation compound (GIC) and its second-order 2D peak was found to be red-shifted due to charge transfer and induced strain in the potential region of 0.5 to 0.15 V vs. Li/Li+. In the case of rGO, the lattice defects assisted in large and early intercalation of electrolyte ions, which is confirmed by the red-shift in the G peak (∼36 cm-1) and its early disappearance below 0.3 V vs. Li/Li+, respectively. Unlike rGO, nitrogen vacancies in N-rGO provide active sites for Li+ intercalation, resulting in enhanced charge transfer, displayed by the large red-shift in the G peak (∼55 cm-1) and blue-shift in the D peak. In addition, a new Raman peak at 1850 cm-1 was observed in N-rGO for the first time, corresponding to the formation of a reversible intermediate species from the interaction between Li+ and nitrogen vacancies. This work demonstrates the use of a simple in situ technique to get insight into the nano-carbon electrodes during device operation and to reveal the role of doped nitrogen atoms for Li+ intercalation.

An all solid-state Li ion battery composed of low molecular weight crystalline electrolyte.

Conduction mechanisms in solid polymer electrolytes of Li ion batteries have always been a concern due to their theoretical limitation in conductivity value. In an attempt to increase the ionic conductivity of solid state electrolytes, used in lithium ion secondary batteries (LiBs), we studied the synthesis and conductive properties of a low molecular weight cyclic organoboron crystalline electrolyte. This electrolyte was expected to show better electrochemical properties than solid polymer electrolytes. The electrolyte was doped with LiTFSI salt via two different methods viz. (1) facile grinding of the crystalline sample with lithium salt under a nitrogen atmosphere and (2) a conventional method of solvent dissolution and evaporation under vacuum. The electrochemical properties were studied under specific composition of Li salt. The presence of crystallinity in the electrolyte can be considered as an important factor behind the high ionic conductivity of an all solid electrolyte of this type. Charge-discharge properties of the cell using the electrolyte were investigated in anodic half-cell configuration.

Evaluation of Alkylamine Modified Pt Nanoparticles as Oxygen Reduction Reaction Electrocatalyst for Fuel Cells via Electrochemical Impedance Spectroscopy.

Organically (octyl amine, OA) surface modified electrocatalyst (OA-Pt/CB) was studied for its oxygen reduction reaction (ORR) activity via dc methods and its charge and mass transfer properties were studied via electrochemical impedance spectroscopy (EIS). Comparison with a commercial catalyst (TEC10V30E) with similar Pt content was also carried out. In EIS, both the catalysts showed a single time-constant with an emerging high-frequency semicircle of very small diameter which was fitted using suitable equivalent circuits. The organically modified catalyst showed lower charge-transfer resistance and hence, low polarization resistance in high potential region as compared to the commercial catalyst. The dominance of kinetic processes was observed at 0.925-1.000 V, whereas domination of diffusion based processes was observed at lower potential region for the organic catalyst. No effect due to the presence of carbon was observed in the EIS spectra. Using the hydrodynamic method, higher current penetration depth was obtained for the organically modified catalyst at 1600 rpm. Exchange current density and Tafel slopes for both the electrocatalysts were calculated from the polarization resistance obtained from EIS which was in correlation with the results obtained from dc methods.

Few-Layered MoS2/Acetylene Black Composite as an Efficient Anode Material for Lithium-Ion Batteries.

Novel MoS2/acetylene black (AB) composite was developed using a single-step hydrothermal method. A systematic characterization revealed a few-layered, ultrathin MoS2 grown on the surface of AB. The inclusion of AB was found to increase the capacity of the composite and achieve discharging capacity of 1813 mAhg-1.

A crystalline low molecular weight cyclic organoboron compound for efficient solid state lithium ion transport.

We report the synthesis of a crystalline cyclic organoboron compound that shows an anomalous Li-ion conduction behaviour with specific composition and method of insertion of a Li salt. The enhanced ionic conductivity of crystalline boric ester/LiTFSI prepared by the grinding method should be due to the formation of regulated ion-conduction channels scaffolded by boron-anion interaction.

Boric ester-type molten salt via dehydrocoupling reaction.

Novel boric ester-type molten salt was prepared using 1-(2-hydroxyethyl)-3-methylimidazolium chloride as a key starting material. After an ion exchange reaction of 1-(2-hydroxyethyl)-3-methylimidazolium chloride with lithium (bis-(trifluoromethanesulfonyl) imide) (LiNTf2), the resulting 1-(2-hydroxyethyl)-3-methylimidazolium NTf2 was reacted with 9-borabicyclo[3.3.1]nonane (9-BBN) to give the desired boric ester-type molten salt in a moderate yield. The structure of the boric ester-type molten salt was supported by 1H-, 13C-, 11B- and 19F-NMR spectra. In the presence of two different kinds of lithium salts, the matrices showed an ionic conductivity in the range of 1.1 × 10⁻4-1.6 × 10⁻5 S cm⁻¹ at 51 °C. This was higher than other organoboron molten salts ever reported.