Quality of orthodontic care-A multicenter cohort study in a German convenience sample : Part 2: Cross-sectional patient-reported outcomes after orthodontic treatment.

OBJECTIVES: In light of the growing interest in orthodontic care and its effectiveness in Germany, part 2 of this multicenter cohort study evaluated patient-reported outcomes such as oral health-related quality of life (OHRQoL), oral hygiene habits, oral health beliefs, and potential influencing factors. METHODS: Of 586 patients screened from seven German study centers, data from 343 patients were analyzed for this part of the study. At the end of their orthodontic treatment, study participants filled out a questionnaire of either the German long version of the Oral Health Impact Profile (OHIP-G 49) or the German short version of the Child Oral Health Impact Profile (COHIP-19), depending on their age, as well as questions about their oral hygiene behavior and beliefs. Patient-, treatment- and occlusion-related factors were analyzed to account for potential influencing factors with regard to patients' OHRQoL after orthodontic treatment. RESULTS: In all, 222 study participants filled out the OHIP-based and 121 the COHIP-based questionnaire. The mean OHIP-G 49 score was 12.68 and the mean OHIP-G 14 score was 3.09; the mean COHIP-19 score was 6.52 (inverted score 69.48). For OHIP-G 49 scores, a nonsignificant trend towards a higher score for male patients (14.45 vs 11.54; p = 0.061) was detected, while this trend was inverse for the COHIP-19 scores, i.e., female patients reported more impairment (total score 6.99 vs. 5.84; p = 0.099). Analyses suggested a trend towards better OHRQoL for patients who classified for the Peer Assessment Rating (PAR) Index improvement rate group 'greatly improved' as well as for nonsmokers. Oral hygiene habits and beliefs after orthodontic treatment were estimated to be good. CONCLUSION: In this German cohort, OHRQoL proved to be good and was rather unimpaired after orthodontic treatment. Furthermore, self-reported oral hygiene behavior and oral health beliefs represented good health awareness.

Longitudinal Three-Dimensional Stereophotogrammetric Growth Analysis in Infants with Unilateral Cleft Lip and Palate from 3 to 12 Months of Age.

This longitudinal study aimed to evaluate facial growth and soft tissue changes in infants with complete unilateral cleft lip, alveolus, and palate (CUCLAP) at ages 3, 9, and 12 months. Using 3D images of 22 CUCLAP infants, average faces and distance maps for the entire face and specific regions were created. Color-coded maps highlighted more significant soft tissue changes from 3 to 9 months than from 9 to 12 months. The first interval showed substantial growth in the entire face, particularly in the forehead, eyes, lower lip, chin, and cheeks (p < 0.001), while the second interval exhibited no significant growth. This study provides insights into facial soft tissue growth in CUCLAP infants during critical developmental stages, emphasizing substantial improvements between 3 and 9 months, mainly in the chin, lower lip, and forehead. However, uneven growth occurred in the upper lip, philtrum, and nostrils throughout both intervals, with an overall decline in growth from 9 to 12 months. These findings underscore the dynamic nature of soft tissue growth in CUCLAP patients, highlighting the need to consider these patterns in treatment planning. Future research should explore the underlying factors and develop customized treatment interventions for enhanced facial aesthetics and function in this population.

Scanning electron microscopy evaluation of enamel surfaces using different air-polishing powders in the orthodontic setting: an in vitro study.

PURPOSE: The aim of this in vitro study was to quantify and compare changes of the enamel surface caused by periodical use of different air-polishing powders during multibracket therapy. METHODS: Bovine high-gloss polished enamel specimens were air-polished using an AIR-FLOW® Master Piezon with maximum powder and water settings. Each specimen was blasted with sodium bicarbonate (AIR-FLOW® Powder Classic, Electro Medical Systems, Munich, Germany) and erythritol (AIR-FLOW® Powder Plus, Electro Medical Systems). Blasting duration was adapted to the powders' cleaning efficacy and corresponded to 25 air-polishing treatments in a patient with braces. A spindle apparatus ensured uniform guidance at a distance of 4 mm and a 90° angle. Qualitative and quantitative assessments were performed with the use of low vacuum scanning electron microscopy. Following external filtering and image processing, arithmetical square height (Sa) and root mean square height (Sq) were determined. RESULTS: Both prophy powders caused a significant increase in enamel roughness. Surfaces blasted with sodium bicarbonate (Sa = 64.35 ± 36.65 nm; Sq = 80.14 ± 44.80 nm) showed significantly (p < 0.001) higher roughness than samples treated with erythritol (Sa = 24.40 ± 7.42 nm; Sq = 30.86 ± 9.30 nm). The observed defects in enamel structure caused by sodium bicarbonate extended across prism boundaries. Prism structure remained intact after air-polishing with erythritol. CONCLUSION: Both applied air-polishing powders led to surface alterations. Despite shorter treatment times, sodium bicarbonate was significantly more abrasive than erythritol. Clinicians must compromise between saving time and abrasively removing healthy enamel.

Eruption Pattern of Third Molars in Orthodontic Patients Treated with First Permanent Molar Extraction: A Longitudinal Retrospective Evaluation.

The aim of this study was to evaluate angular and positional changes in the second (M2) and third molars (M3) of orthodontically treated patients undergoing a first molar (M1) extraction. A retrospective longitudinal study with a sample of 152 pre- and post-treatment panoramic radiographs was conducted. Thirty-nine patients (51.3%) were orthodontically treated with M1 extraction and thirty-seven (48.7%) were treated without extraction. Angulations of M2 and M3 relative to the infraorbital (IOP) and the palatal planes (PP) were measured and compared between the groups before orthodontic treatment (T1) and after the completion of orthodontic space closure (T2). The prognosis of M3 eruptions was evaluated by assessing their horizontal and vertical position (inclination) using different classification systems. The angular (p < 0.001) and inclination improvement (p < 0.01) of the maxillary M3 was significant for the M1 extraction group. The mandibular M3 inclination significantly improved (p < 0.01), whereas the groups' angulation and vertical position were not significantly different. These findings suggest that extraction therapy has a favorable effect on the maxillary M2 and M3 angulation, but not on the mandibular. M1 extraction showed a signi- ficant effect on the horizontal position of M3 and thus may improve the eruption space and prognosis.

Dietary and metabolic effects on the oral status of patients with phenylketonuria: a nation-based cross-sectional study.

OBJECTIVES: The aim of this study was to compare the prevalence of oral diseases (caries, periodontal disease, enamel defects) between patients with phenylketonuria (PKU), their siblings, and a matched control group. MATERIALS AND METHODS: A total of 109 patients with PKU, 14 siblings of PKU patients, and 100 healthy individuals aged 6 to 68 years were recruited. All participants completed a questionnaire based on their health status. The patients' decayed/missing/filled teeth index (dmft/DMFT), gingival bleeding index (GBI), plaque control record (PCR), periodontal screening and recording index (PSR), and developmental enamel defects index (DDE) were recorded. Descriptive statistics and regression modeling were used to examine potential associations between the exposure and the outcomes of interest. RESULTS: Patients with PKU had 1.6 times more caries (95% confidence interval (CI) 1.22 to 2.20; p = 0.001), seven times more enamel defects (95% CI 3.94 to 14.21; p < 0.001), and four times higher PSR values (95% CI 2.26 to 7.15; p < 0.001) than the control group. The siblings had significantly fewer enamel defects but no significant differences in caries and periodontal parameters compared to the PKU patients. CONCLUSIONS: The results showed a higher risk for the development of caries, periodontitis, and enamel defects in PKU patients. CLINICAL RELEVANCE: Implementation of preventive measures and regular dental care is necessary for patients with PKU.

Accuracy of indirect bracket placement with medium-soft, transparent, broad-coverage transfer trays fabricated using computer-aided design and manufacturing: An in-vivo study.

INTRODUCTION: The objective of this study was to test the precision of in-vivo indirect bracket placement via medium-soft, transparent, broad-coverage, computer-aided designed and manufactured transfer trays using an automated digital method. METHODS: Seventeen patients requiring vestibular fixed appliances were consecutively recruited, and bonding accuracy was measured at each bracket, evaluating 3 linear (mesiodistal, buccolingual, and vertical) and 3 angular measurements (torque, tip, and rotation) with an automated method involving digital superimposition of individual teeth. Mean and standard deviation values were calculated for both arches, single arch, and tooth type, and the percentages of single deviations over the thresholds of 0.25 mm and 1° were calculated, as well as maximum and minimum values for each deviation and directional bias. Correlations between each variable (arch, tooth type, and single tooth) and deviations were investigated through classification and regression trees (CART) predictive models. RESULTS: Neither mean nor single linear deviations ever exceeded the set cutoff value of 0.25 mm. Mean angular deviations never exceeded 1°, but some individual angular deviations did, specifically 8.31% of torque, 13.16% of tip, and 7.16% of rotation deviations. The highest percentage of deviation was recorded for rotation of the maxillary incisors (18.11%). No evident trend in directional deviation bias was found. Tooth type appears to influence mesiodistal and torque deviations, whereas the single tooth variable influenced the percentage of rotation deviations exceeding 1° (P <0.05). CONCLUSIONS: This computer-aided designed and manufactured medium-soft, transparent transfer tray provides accurate bracket placement and could be recommended for routine fixed appliance treatment.

Accuracy of palatal orthodontic mini-implants placed by conventionally or CAD/CAM-based surgical guides: a comparative in vitro study.

OBJECTIVES: To investigate and compare the transfer accuracy of five different surgical guides (SGs) for the insertion of orthodontic mini-implants (OMIs) in the anterior palate. MATERIALS AND METHODS: Stereolithographic files of 10 maxillary patient models and their corresponding lateral cephalograms were virtually matched and used for planning the position of two parallel OMIs in the paramedian region of the anterior palate. For each patient model, three 3-dimensional (3D)-printed and two conventional SGs were manufactured from different materials, and a total of 96 OMIs were transferred to the anterior palates of the respective 50 molded resin models. The planned (T0) and the actual (T1) OMI positions were analyzed and compared after superimposition of the digitized models. The deviations between the OMI positions in T0 and T1 were described as the distance between the head and the tip, respectively, of each OMI in millimeters and the deviating angle between the OMI axes for each patient and SG. RESULTS: The conventionally manufactured SGs of Pattern Resin LS (GC Europe N.V., Leuven, Belgium) showed the highest linear and angular transfer accuracy for the insertion of OMIs. The highest deviations were found with the SGs made of IMPRIMO LC Splint (3D-printed; Scheu-Dental, Iserlohn, Germany) and Memosil 2 (conventional SG; Kulzer, Hanau, Germany). CONCLUSIONS: The 3D-printed SGs did not reach the accuracy of the conventional SGs made of Pattern Resin but may provide sufficient accuracy for palatal OMI placement.

Angular and positional changes of the maxillary third molars after orthodontic treatment with different premolar extraction patterns.

OBJECTIVES: To evaluate the angular and positional changes of the maxillary second (M2) and third molars (M3) after orthodontic premolar extraction treatment according to patient skeletal classification and growth pattern. MATERIALS AND METHODS: Panoramic radiographs of patients treated with extraction of the first or second premolars (n = 116) and patients treated without extraction (n = 92), taken before orthodontic treatment (T0) and after completion of multibracket appliance therapy (T1) were analyzed. Angle classification, growth pattern, crowding, and incisor inclination were recorded. The palatal (PP) and interorbital planes (IOP) were used as reference lines. Changes in the M3 angulation relative to PP and IOP (T0-T1) within the same group were evaluated with paired t-tests. One-way analysis of variance (ANOVA) and Kruskal-Wallis tests were used for comparisons between the groups. Accordingly, pairwise comparisons were performed with Mann-Whitney U-tests or independent t-tests (P < .05). RESULTS: The M3 angulation related to the PP and the IOP did not differ significantly between the extraction and nonextraction groups. The M2 angulation improved in the premolar extraction group between T0 and T1 (M2/PP, P < .001). According to Archer's classification, the change in the vertical position of M3 differed significantly between the extraction and nonextraction groups (P < .001). CONCLUSIONS: The angulation of M3 improved over time regardless of the extraction decision. The vertical eruption pattern of M3 was positively influenced only in the extraction group. M2 became significantly more upright in the orthodontic extraction treatment groups.

Indirect bonding: an in-vitro comparison of a Polyjet printed versus a conventional silicone transfer tray.

OBJECTIVES: To investigate and compare transfer accuracy between a Polyjet printed indirect bonding (IDB) tray (SureSmile, Dentsply Sirona, Richardson, TX, USA) and a conventional two-layered silicone tray. MATERIALS AND METHODS: Plaster models of 24 patients were digitized with an intraoral scanner, and brackets and tubes were positioned virtually on the provider's homepage. IDB trays were designed over the planned attachments and Polyjet 3D-printed. For the conventional tray, brackets and tubes were bonded in their ideal positions manually before fabricating a two-layered silicone tray. For both trays, attachments were transferred indirectly to corresponding models. A second scan was performed of each bonded model to capture actual attachment positions, which were then compared to initial bracket positions using Geomagic Control (3D Systems Inc., Rock Hill, SC, USA). Linear and angular deviations were evaluated for each attachment within a clinically acceptable range of ≤0.2 mm and 1°. A descriptive statistical analysis and a mixed model were executed. RESULTS: Both trays showed highest accuracy in the orobuccal direction (99.5% for the 3D-printed tray and 100% for the conventional tray). For the 3D-printed tray, most frequent deviations were found for torque (15.4%) and, for the silicone tray, for rotation (1.9%). A significant difference was observed for angular measurements (P = .004) between the trays. CONCLUSIONS: Transfer accuracy of Polyjet printed IDB tray is not as high as transfer accuracy of the conventional silicone tray, though both trays show good results and are suitable for clinical application.

Monitoring orthodontic tooth movement in rats after piezocision by bone scintigraphy.

AIM: Piezocision, corticocision of mineralized tissue by ultrasound showed promising results in accelerating tooth movement induced by orthodontic appliances although the biologic effects of this procedure are not well-understood so far. The aim of this study was to investigate the impact of piezocision on bone remodeling in rats by bone SPECT imaging. MATERIAL AND METHODS: Ten male Wistar rats underwent surgical placement of orthodontic appliances on each side of the maxilla followed by piezocision on one side only. Each rat underwent 99mTc-MDP bone SPECT/CT imaging before surgery (T0), and 2 (T1) and 4 weeks (T2) after surgery. Bone uptake is expressed as median [IQR] min-max in percentage of the injected activity per ml computed from the 10 voxels with the highest uptake (%IAmax10/ml). RESULTS: Pooled data regardless of the piezocision showed a significant increase in bone uptake from T0 (3.2 [2.8-3.9] 2.6-4.9) to T1 (4.4 [3.8-4.6] 3.4-4.8; p = 0.001). Thereafter, the uptake decreased to T2 (3.8 [3.1-4.4] 2.8-4.8; p = 0.116). No significant differences in bone uptake were found between the maxilla sides without and with piezocision: T1: without (4.3 [3.8-4.5] 3.4-4.8) vs. with (4.5 [3.7-4.6] 3.5-4.7; p=0.285), T2: without (4.0 [3.1-4.5] 2.8-4.8) vs. with (3.7 [3.0-4.4] 2.8-4.8; p=0.062). CONCLUSION: 99mTc-MDP bone SPECT imaging in rats was able to reproduce changes in bone uptake in the maxilla after placement of orthodontic appliances inducing measurable tooth movement. An additional effect of piezocision on bone remodeling in terms of bone uptake was not detectable which is probably due to the pronounced and significant effects induced by the orthodontic appliances per se, which may mask the potential effects of additional piezocision.

Comparison of Two 3D-Printed Indirect Bonding (IDB) Tray Design Versions and Their Influence on the Transfer Accuracy.

Objective: This study aims to investigate the transfer accuracy of two different design versions for 3D-printed indirect bonding (IDB) trays. Materials and Methods: Digital plaster models of 27 patients virtually received vestibular attachments on every tooth using OnyxCeph³™ (Image Instruments, Chemnitz, Germany). Based on these simulated bracket and tube positions, two versions of transfer trays were designed for each dental arch and patient, which differed in the mechanism of bracket retention: Variant one (V1) had arm-like structures protruding from the tray base and reaching into the horizontal and vertical bracket slots, and variant two (V2) had a pocket-shaped design enclosing the brackets from three sides. Both tray designs were 3D-printed with the same digital light processing (DLP) printer using a flexible resin-based material (IMPRIMO® LC IBT/Asiga MAX™, SCHEU-DENTAL, Iserlohn, Germany). Brackets and tubes (discovery® smart/pearl, Ortho-Cast M-Series, Dentaurum, Ispringen, Germany) were inserted into the respective retention mechanism of the trays and IDB was performed on corresponding plaster models. An intraoral scan (TRIOS® 3W, 3Shape, Copenhagen, Denmark) was performed to capture the actual attachment positions and compared to the virtually planned positions with Geomagic© Control (3D Systems Inc., Rock Hill, SC, USA) using a scripted calculation tool, which superimposed the respective tooth surfaces. The resulting attachment deviations were determined in three linear (mesiodistal, vertical and orovestibular) and three angular (torque, rotation and tip) directions and analyzed with a descriptive statistical analysis. A comparison between the two IDB tray designs was conducted using a mixed model analysis (IBM, SPSS® Statistics 27, Armonk, NY, USA). Results: Both design versions of the 3D-printed IDB trays did not differ significantly in their transfer accuracy (p > 0.05). In total, 98% (V1) and 98.5% (V2) of the linear deviations were within the clinically acceptable range of ±0.2 mm. For the angular deviations, 84.9% (V1) and 86.8% (V2) were within the range of ±1°. With V1, most deviations occurred in the mesiodistal direction (3.3%) and in rotation (18%). With V2, most deviations occurred in the vertical direction (3.8%) and in palatinal and lingual crown torque (16.3%). Conclusions: The transfer accuracies of the investigated design versions for 3D-printed IDB trays show good and comparable results albeit their different retention mechanisms for the attachments and are, therefore, both suitable for clinical practice.

Management of white spot lesions induced during orthodontic treatment with multibracket appliance: a national-based survey.

OBJECTIVES: The study aimed to survey current strategies against enamel demineralization during multibracket therapy (MBT) and guide a prevention concept based on existing scientific evidence. MATERIALS AND METHODS: The survey comprised questions on the prevention and management of white spot lesions (WSL). The questionnaire was sent via email to orthodontists working in practices and universities throughout Germany. The analysis involved descriptive statistics using the chi-square test (p < 0.05). RESULTS: A prevention protocol was used before MBT by 80.6% of the participants. Less than a quarter of the participants regularly applied topical fluoride (gel or varnish) during MBT. According to the respondents' assessment, the prevalence of WSL during MBT is 11.6%, mainly observed in 12- to 15-year-old male patients. Orthodontists graduating after 2000 tended to recommend and apply fluoride-containing materials more often than their senior colleagues (p = 0.039). Participants from private practices applied fluoride varnish or gel more frequently than those from university clinics (p = 0.013). Fluoridation was the most common (70.7%) treatment for WSL after MBT, followed by resin infiltration (21.2%). The majority (80.9%) of the participants favor a guideline for preventing WSL. CONCLUSIONS: WSL prevention during MBT is challenging. Males in puberty are predominantly affected. Younger orthodontists are more concerned about the prevention of WSL during MBT. CLINICAL RELEVANCE: The non-negligible prevalence of individuals with WSL emphasizes the need for dental education and health care reform. This would help to implement standardized procedures and establish innovative applications.

Accuracy of indirect bonding trays - a measurement algorithm.

AIM: To present an image-processing measurement algorithm to evaluate the transfer accuracy of indirect bonding (IDB) trays, exemplified by a CAD/CAM-based IDB tray integrated into a digital orthodontic workflow. MATERIALS AND METHODS: Plaster casts of 24 patients with full dentition and different malocclusions were scanned with an intraoral scanner (Trios; 3Shape, Copenhagen, Denmark) to obtain digital models, which served for the virtual placement of orthodontic brackets in simulation software (OnyxCeph; Image Instruments, Chemnitz, Germany). The resulting STL files were sent to a dental laboratory (CA Digital; Hilden, Germany) for the production of INDIVIDUA IDB trays. These trays were used to transfer the brackets to the respective plaster casts. Finally, a second scan was performed to record the actual bracket positions. The transfer accuracy was then analyzed by a measurement algorithm scripted to automation, which calculated the deviations of the planned and real bracket positions with a local best-fit alignment, resulting in three linear and three angular measurements for each bracket. RESULTS: In total, 622 brackets and tubes were transferred successfully. The presented algorithm analyzed the transfer accuracy and demonstrated that the linear measurements were 98.3% within the range of the American Board of Orthodontics standard. The angular measurements were 86.7% within this range when the INDIVIDUA IDB tray was used. CONCLUSION: Scripted measurement algorithms facilitated the evaluation of present and future materials and designs for IDB trays to obtain an efficient solution for orthodontic practice. The INDIVIDUA IDB tray is a digital alternative to conventional IDB trays (Int J Comput Dent 2022;25(3):295-302; doi: 10.3290/j.ijcd.b2599775).

Impact of piezocision on orthodontic tooth movement.

OBJECTIVE: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. METHODS: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. RESULTS: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. CONCLUSIONS: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

Accurate Bracket Placement with an Indirect Bonding Method Using Digitally Designed Transfer Models Printed in Different Orientations-An In Vitro Study.

OBJECTIVE: A digital workflow opens up new possibilities for the indirect bonding (IDB) of brackets. We tested if the printing orientation for bracket transfer models on the build platform of a 3D printer influences the accuracy of the following IDB method. We also evaluated the clinical acceptability of the IDB method combining digitally planned and printed transfer models with the conventional fabrication of pressure-molded transfer trays. MATERIALS AND METHODS: In total, 27 digitally planned bracket transfer models were printed with both 15° and 75° angulation from horizontal plane on the build platform of a digital light processing (DLP) printer. Brackets were temporarily bonded to the transfer models and pressure-molded trays were produced on them. IDB was then performed using the trays on the respective plaster models. The plaster models were scanned with an optical scanner. Digitally planned pre-bonding and scanned post-bonding bracket positions were superimposed with a software and resulted in three linear and three angular deviations per bracket. RESULTS: No statistically significant differences of the transfer accuracy of printed transfer models angulated 15° or 75° on the 3D printer build platform were found. About 97% of the linear and 82% of the angular deviations were within the clinically acceptable range of ±0.2 mm and ±1°, respectively. The highest inaccuracies in the linear dimension occurred in the vertical towards the gingival direction and in the angular dimension in palatal crown torque. CONCLUSION: For the IDB method used, the printing orientation on the build platform did not have a significant impact on the transfer accuracy.

Deep learning for cephalometric landmark detection: systematic review and meta-analysis.

OBJECTIVES: Deep learning (DL) has been increasingly employed for automated landmark detection, e.g., for cephalometric purposes. We performed a systematic review and meta-analysis to assess the accuracy and underlying evidence for DL for cephalometric landmark detection on 2-D and 3-D radiographs. METHODS: Diagnostic accuracy studies published in 2015-2020 in Medline/Embase/IEEE/arXiv and employing DL for cephalometric landmark detection were identified and extracted by two independent reviewers. Random-effects meta-analysis, subgroup, and meta-regression were performed, and study quality was assessed using QUADAS-2. The review was registered (PROSPERO no. 227498). DATA: From 321 identified records, 19 studies (published 2017-2020), all employing convolutional neural networks, mainly on 2-D lateral radiographs (n=15), using data from publicly available datasets (n=12) and testing the detection of a mean of 30 (SD: 25; range.: 7-93) landmarks, were included. The reference test was established by two experts (n=11), 1 expert (n=4), 3 experts (n=3), and a set of annotators (n=1). Risk of bias was high, and applicability concerns were detected for most studies, mainly regarding the data selection and reference test conduct. Landmark prediction error centered around a 2-mm error threshold (mean; 95% confidence interval: (-0.581; 95 CI: -1.264 to 0.102 mm)). The proportion of landmarks detected within this 2-mm threshold was 0.799 (0.770 to 0.824). CONCLUSIONS: DL shows relatively high accuracy for detecting landmarks on cephalometric imagery. The overall body of evidence is consistent but suffers from high risk of bias. Demonstrating robustness and generalizability of DL for landmark detection is needed. CLINICAL SIGNIFICANCE: Existing DL models show consistent and largely high accuracy for automated detection of cephalometric landmarks. The majority of studies so far focused on 2-D imagery; data on 3-D imagery are sparse, but promising. Future studies should focus on demonstrating generalizability, robustness, and clinical usefulness of DL for this objective.

Knowledge, attitudes, and beliefs regarding molar incisor hypomineralization (MIH) amongst German dental students.

BACKGROUND: Knowledge of molar incisor hypomineralization (MIH) has relevance for paediatric dentists. AIM: To assess final-year German dental students' knowledge, attitudes, and beliefs regarding MIH. MATERIALS AND METHODS: A previously validated questionnaire was posted to the 31 German dental schools. Demographic covariates as well as knowledge regarding diagnosis and prevalence, and attitudes and beliefs around aetiology and management were collected. RESULTS: Twenty-two (71%) dental schools responded and a total of 877 students participated. Most (97%) were familiar with MIH and 88% were aware of the diagnostic criteria for MIH; however, only 42% knew how to implement them. One-third were able to identify MIH and 16% reported diagnostic confidence when doing so; 90% assumed the MIH prevalence to be <10%. Two-thirds of the respondents implicated genetic components as the main aetiological factor of MIH. Resin composite (60%) and preformed metal crowns (46%) were the dental materials most often suggested for restorative management. Almost all (98%) respondents were interested in receiving more clinical training. CONCLUSION: German students were familiar with MIH; however, they reported low levels of knowledge and confidence regarding its prevalence and diagnosis. Standardized nationwide, up-to-date curricula should be implemented to educate future dentists in Germany.

Selective vs stepwise removal of deep carious lesions in primary molars: 24 months follow-up from a randomized controlled trial.

OBJECTIVES: For well-defined deep (> 2/3 dentin extension) carious lesions, selective (SE) or stepwise (SW) carious tissue removals have been recommended, while there is limited comparative evidence for both. We compared SE and SW over 24 months in a randomized controlled trial. METHODS: A two-arm superiority trial was conducted comparing SW/SE in primary molars without pulpal symptoms but well-defined deep lesions. Seventy-four children (1 molar/child) aged 3-9 years were recruited. In a first step, peripheral carious tissue was removed until hard dentin remained, while in proximity to the pulp, leathery dentin was left. An adhesive compomer restoration was placed and restorations re-examined after 6 months. In SW, re-entry and removal to firm dentin was conducted pulpo-proximally, followed by re-restoration. Molars were re-evaluated for a total of 24 months. Our primary outcome was success (absence of restorative/endodontic complications or pulp exposures). Secondary outcomes included total treatment and opportunity costs and restoration quality, assessed using modified USPHS criteria. RESULTS: After 24 months, 63 molars (31 SE, 32 SW) were re-assessed. Four failures occurred (2 exposures in SW; 2 pulpal complications in SE, 1 of them leading to extraction, p > 0.05). Restoration integrity was satisfying in both groups (USPHS A/B/C in 21/8/0 SE and 23/7/0 SW, p > 0.05). Treatment and opportunity costs were significantly higher in SW than SE (mean 171 ± 51 vs. 106 ± 90; p < 0.001). CONCLUSIONS: After 2 years, SE and SW showed similar efficacy for managing deep carious lesions in primary molars. The higher costs for SW should be considered during decision-making. CLINICAL SIGNIFICANCE: In primary molars with well-defined deep carious lesions SE was less costly and similarly efficacious like SW. From a cost and applicability perspective, SW may need to be indicated restrictively, e.g., for very deep (> 3/4 dentin extension) lesions only. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT02232828.

A Comparative Study of Shock Absorption Capacities of Custom Fabricated Mouthguards using a Triangulation Sensor.

This in-vitro study compares the shock absorption qualities of five mouthguard designs measured with a triangulation laser sensor during small hard object collisions. The aim was to investigate the impact of different labial designs on mouthguard performance. METHODS: Five different custom-fabricated ethylene vinyl acetate (EVA) types of mouthguards with varying thickness and different labial inserts (polyethylene terephthalate glycol-modified (PETG), nylon mesh, air space) were tested with a triangulation laser sensor during different energy blows, generated with a pendulum testing device. The pendulum hits were applied to the center of a pivoted tooth crown in a custom-built upper jaw model. Measurements were executed with the mouthguards on the model and with no mouthguard as a negative control. RESULTS: Tooth deflection was reduced with all mouthguards in comparison to no mouthguard. Increasing mouthguard thickness improved the mouthguards' shock absorption capacities. Also, adding labial inserts increased their preventive qualities in ascending order: Mouthguard with a soft insert (nylon mesh), a hard insert (PETG), air space plus a hard insert (PETG). CONCLUSION: Increasing EVA foil thickness of a mouthguard, increasing labial thickness, and adding labial inserts (soft, stiff and air space) improve mouthguard shock absorption capabilities during small hard object collisions, thereby improving dental trauma prevention.