Complex Materials with Stochastic Structural Patterns: Spiky Colloids with Enhanced Charge Storage Capacity.

Self-assembled materials with complex nanoscale and mesoscale architecture attract considerable attention in energy and sustainability technologies. Their high performance can be attributed to high surface area, quantum effects, and hierarchical organization. Delineation of these contributions is, however, difficult because complex materials display stochastic structural patterns combining both order and disorder, which is difficult to be consistently reproduced yet being important for materials' functionality. Their compositional variability make systematic studies even harder. Here, a model system of FeSe2 "hedgehog" particles (HPs) was selected  to gain insight into the mechanisms of charge storage n complex nanostructured materials common for batteries and supercapacitors. Specifically, HPs represent self-assembled biomimetic nanomaterials with a medium level of complexity; they display an organizational pattern of spiky colloids with considerable disorder yet non-random; this patternt is consistently reproduced from particle to particle. . It was found that HPs can accommodate ≈70× greater charge density than spheroidal nano- and microparticles. Besides expanded surface area, the enhanced charge storage capacity was enabled by improved hole transport and reversible atomic conformations of FeSe2 layers in the blade-like spikes associated with the rotatory motion of the Se atoms around Fe center. The dispersibility of HPs also enables their easy integration into energy storage devices. HPs quadruple stored electrochemical energy and double the storage modulus of structural supercapacitors.

Scalable Solution Phase Synthesis of 2D Siloxene via a Two-Step Interlayer Expansion Process.

Two-dimensional (2D) siloxene is attracting considerable research interest recently principally owing to its inherent compatibility with silicon-based semiconductor technology. -The synthesis of siloxene has been mostly limited to multilayered structures using traditional topochemical reaction procedures. Herein, we report high-yield synthesis of single to few-layer siloxene nanosheets by developing a two-step interlayer expansion and subsequent liquid phase exfoliation procedure. Our protocol enables high-yield production of few-layer siloxene nanosheets with a lateral dimension of up to 4 µm and thickness ranging from 0.8 to 4.8 nm, corresponding to single to a few layers, well stabilized in water. The atomically flat nature of exfoliated siloxene can be exploited for the construction of 2D/2D heterostructure membranes via typical solution processing. We demonstrate highly ordered graphene/siloxene heterostructure films with synergistic mechanical and electrical properties, which deliver noticeably high device capacitance when assembled into a coin cell symmetric supercapacitor device structures. Additionally, we demonstrate that the mechanically flexible exfoliated siloxene-graphene heterostructure enables its direct use in flexible and wearable supercapacitor applications.

Application of 2D Materials for Adsorptive Removal of Air Pollutants.

Air pollution is on the priority list of global safety issues, with the concern of fatal environmental and public health deterioration. 2D materials are potential adsorbent materials for environmental decontamination, owing to their high surface area, manageable interlayer binding, large surface-to-volume ratio, specific binding capability, and chemical, thermal, and mechanistic stability. Specifically, graphene oxide and reduced graphene oxide have been attracting attention, taking advantage of their low cost synthesis, excessive oxygen containing surface functionalities, and intrinsic aqueous dispersibility, making them desirable for the development of cost-effective, high performance air filters. Many different material designs have been proposed to expand their filtration capability, including the functionalization and integration with other metals and metal oxides, which act not only as binding agents to the target pollutants but also as antimicrobial agents. This review highlights the advantages and drawbacks of 2D materials for air filtration and summarizes the interrelationships among various strategies and the resultant filtration performance in terms of structural engineering, morphology control, and material compositions. Finally, potential future directions are suggested toward the idealized designs of 2D material based air filters.

Molecular-Level Lubrication Effect of 0D Nanodiamonds for Highly Bendable Graphene Liquid Crystalline Fibers.

Graphene fiber is emerging as a new class of carbon-based fiber with distinctive material properties particularly useful for electroconductive components for wearable devices. Presently, stretchable and bendable graphene fibers are principally employing soft dielectric additives, such as polymers, which can significantly deteriorate the genuine electrical properties of pristine graphene-based structures. We report molecular-level lubricating nanodiamonds as an effective physical property modifier to improve the mechanical flexibility of graphene fibers by relieving the tight interlayer stacking among graphene sheets. Nanoscale-sized NDs effectively increase the tensile strain and bending strain of graphene/nanodiamond composite fibers while maintaining the genuine electrical conductivity of pristine graphene-based fibers. The molecular-level lubricating mechanism is elucidated by friction force microscopy on the nanoscale as well as by shear stress measurement on the macroscopic scale. The resultant highly bendable graphene/nanodiamond composite fiber is successfully weaved into all graphene fiber-based textiles and wearable Joule heaters, proposing the potential for reliable wearable applications.

Self-Planarization of High-Performance Graphene Liquid Crystalline Fibers by Hydration.

Graphene fibers (GFs) are promising elements for flexible conductors and energy storage devices, while translating the extraordinary properties of individual graphene sheets into the macroscopically assembled 1D structures. We report that a small amount of water addition to the graphene oxide (GO) N-methyl-2-pyrrolidone (NMP) dispersion has significant influences on the mesophase structures and physical properties of wet-spun GFs. Notably, 2 wt % of water successfully hydrates GO flakes in NMP dope to form a stable graphene oxide liquid crystal (GOLC) phase. Furthermore, 4 wt % of water addition causes spontaneous planarization of wet-spun GFs. Motivated from these interesting findings, we develop highly electroconductive and mechanically strong flat GFs by introducing highly crystalline electrochemically exfoliated graphene (EG) in the wet-spinning of NMP-based GOLC fibers. The resultant high-performance hybrid GFs can be sewn on cloth, taking advantage of the mechanical robustness and high flexibility.

2D Materials Decorated with Ultrathin and Porous Graphene Oxide for High Stability and Selective Surface Activity.

2D black phosphorus (BP) and MXenes have triggered enormous research interest in catalysis, energy storage, and chemical sensing. Unfortunately, the low stability of these materials under practical operating conditions remains a critical bottleneck, particularly as they are prone to oxidization under moisture. In this work, the design and application of stable 2D heterostructures obtained from decorating BP and MXene (Ti3 C2 Tx ) with few-layer holey graphene oxide (FHGO) membranes are presented. In the resulting heterostructured systems, FHGO serves as a multifunctional passivation layer that shields BP or MXene from oxidative degradation, while allowing the selective diffusion of target gas molecules through its micropores and toward the underlying 2D material. Through a case study of dilute NO2 sensing, it is demonstrated that these heterostructures show a greatly enhanced sensing performance under humid conditions, where fast sensing speed and response are consistently observed, and high stability is impressively retained upon repetitive sensing cycles for 1000 min. These results corroborate the efficacy of material decoration with porous FHGO membranes and suggest that this is a generalizable strategy for reliable high-performance applications of 2D materials.

Mussel-Inspired Defect Engineering of Graphene Liquid Crystalline Fibers for Synergistic Enhancement of Mechanical Strength and Electrical Conductivity.

Inspired by mussel adhesive polydopamine (PDA), effective reinforcement of graphene-based liquid crystalline fibers to attain high mechanical and electrical properties simultaneously is presented. The two-step defect engineering, relying on bioinspired surface polymerization and subsequent solution infiltration of PDA, addresses the intrinsic limitation of graphene fibers arising from the folding and wrinkling of graphene layers during the fiber-spinning process. For a clear understanding of the mechanism of PDA-induced defect engineering, interfacial adhesion between graphene oxide sheets is straightforwardly analyzed by the atomic force microscopy pull-off test. Subsequently, PDA could be converted into an N-doped graphitic layer within the fiber structure by a mild thermal treatment such that mechanically strong fibers could be obtained without sacrificing electrical conductivity. Bioinspired graphene-based fiber holds great promise for a wide range of applications, including flexible electronics, multifunctional textiles, and wearable sensors.

Graphene oxide liquid crystals: a frontier 2D soft material for graphene-based functional materials.

Graphene, despite being the best known strong and electrical/thermal conductive material, has found limited success in practical applications, mostly due to difficulties in the formation of desired large-scale highly organized structures. Our discovery of a liquid crystalline phase formation in graphene oxide dispersion has enabled a broad spectrum of highly aligned graphene-based structures, including films, fibers, membranes, and mesoscale structures. In this review, the current understanding of the structure-property relationship of graphene oxide liquid crystals (GOLCs) is overviewed. Various synthetic methods and parameters that can be optimized for GOLC phase formation are highlighted. Along with the results from different characterization methods for the identification of the GOLC phases, the typical characteristics of different types of GOLC phases introduced so far, including nematic, lamellar and chiral phases, are carefully discussed. Finally, various interesting applications of GOLCs are outlined together with the future prospects for their further developments.

Interface-Confined High Crystalline Growth of Semiconducting Polymers at Graphene Fibers for High-Performance Wearable Supercapacitors.

We report graphene@polymer core-shell fibers (G@PFs) composed of N and Cu codoped porous graphene fiber cores uniformly coated with semiconducting polymer shell layers with superb electrochemical characteristics. Aqueous/organic interface-confined polymerization method produced robust highly crystalline uniform semiconducting polymer shells with high electrical conductivity and redox activity. When the resultant core-shell fibers are utilized for fiber supercapacitor application, high areal/volume capacitance and energy densities are attained along with long-term cycle stability. Desirable combination of mechanical flexibility, electrochemical properties, and facile process scalability makes our G@PFs particularly promising for portable and wearable electronics.

Ultrafast Interfacial Self-Assembly of 2D Transition Metal Dichalcogenides Monolayer Films and Their Vertical and In-Plane Heterostructures.

Cost effective scalable method for uniform film formation is highly demanded for the emerging applications of 2D transition metal dichalcogenides (TMDs). We demonstrate a reliable and fast interfacial self-assembly of TMD thin films and their heterostructures. Large-area 2D TMD monolayer films are assembled at air-water interface in a few minutes by simple addition of ethyl acetate (EA) onto dilute aqueous dispersions of TMDs. Assembled TMD films can be directly transferred onto arbitrary nonplanar and flexible substrates. Precise thickness controllability of TMD thin films, which is essential for thickness-dependent applications, can be readily obtained by the number of film stacking. Most importantly, complex structures such as laterally assembled 2D heterostructures of TMDs can be assembled from mixture solution dispersions of two or more different TMDs. This unusually fast interfacial self-assembly could open up a novel applications of 2D TMD materials with precise tunability of layer number and film structures.