Silver nanowire electrodes for transparent light emitting devices based on WS2monolayers.

Transition metal dichalcogenide (TMDC) monolayers with their direct band gap in the visible to near-infrared spectral range have emerged over the past years as highly promising semiconducting materials for optoelectronic applications. Progress in scalable fabrication methods for TMDCs like metal-organic chemical vapor deposition (MOCVD) and the ambition to exploit specific material properties, such as mechanical flexibility or high transparency, highlight the importance of suitable device concepts and processing techniques. In this work, we make use of the high transparency of TMDC monolayers to fabricate transparent light-emitting devices (LEDs). MOCVD-grown WS2is embedded as the active material in a scalable vertical device architecture and combined with a silver nanowire (AgNW) network as a transparent top electrode. The AgNW network was deposited onto the device by a spin-coating process, providing contacts with a sheet resistance below 10 Ω sq-1and a transmittance of nearly 80%. As an electron transport layer we employed a continuous 40 nm thick zinc oxide (ZnO) layer, which was grown by atmospheric pressure spatial atomic layer deposition (AP-SALD), a precise tool for scalable deposition of oxides with defined thickness. With this, LEDs with an average transmittance over 60% in the visible spectral range, emissive areas of several mm2and a turn-on voltage of around 3 V are obtained.

Impact of synthesis temperature and precursor ratio on the crystal quality of MOCVD WSe2monolayers.

Structural defects in transition metal dichalcogenide (TMDC) monolayers (ML) play a significant role in determining their (opto)electronic properties, triggering numerous efforts to control defect densities during material growth or by post-growth treatments. Various types of TMDC have been successfully deposited by MOCVD (metal-organic chemical vapor deposition), which is a wafer-scale deposition technique with excellent uniformity and controllability. However, so far there are no findings on the extent to which the incorporation of defects can be controlled by growth parameters during MOCVD processes of TMDC. In this work, we investigate the effect of growth temperature and precursor ratio during MOCVD of tungsten diselenide (WSe2) on the growth of ML domains and their impact on the density of defects. The aim is to find parameter windows that enable the deposition of WSe2ML with high crystal quality, i.e. a low density of defects. Our findings confirm that the growth temperature has a large influence on the crystal quality of TMDC, significantly stronger than found for the W to Se precursor ratio. Raising the growth temperatures in the range of 688 °C to 791 °C leads to an increase of the number of defects, dominating photoluminescence (PL) at low temperatures (5.6 K). In contrast, an increase of the molar precursor ratio (DiPSe/WCO) from 1000 up to 100 000 leads to less defect-related PL at low temperatures.

Role of Surface Adsorbates on the Photoresponse of (MO)CVD-Grown Graphene-MoS2 Heterostructure Photodetectors.

A promising strategy toward ultrathin, sensitive photodetectors is the combination of a photoactive semiconducting transition-metal dichalcogenide (TMDC) monolayer like MoS2 with highly conductive graphene. Such devices often exhibit a complex and contradictory photoresponse as incident light can trigger both photoconductivity and photoinduced desorption of molecules from the surface. Here, we use metal-organic chemical vapor deposition (MOCVD) to directly grow MoS2 on top of graphene that is deposited on a sapphire wafer via chemical vapor deposition (CVD) for realizing graphene-MoS2 photodetectors. Two-color optical pump-electrical probe experiments allow for separation of light-induced carrier transfer across the graphene-MoS2 heterointerface from adsorbate-induced effects. We demonstrate that adsorbates strongly modify both magnitude and sign of the photoconductivity. This is attributed to a change of the graphene doping from p- to n-type in case adsorbates are being desorbed, while in either case, photogenerated electrons are transferred from MoS2 to graphene. This nondestructive probing method sheds light on the charge carrier transfer mechanisms and the role of adsorbates in two-dimensional (2D) heterostructure photodetectors.

WS2 monolayer-based light-emitting devices in a vertical p-n architecture.

2D semiconductors represent an exciting new material class with great potential for optoelectronic devices. In particular, WS2 monolayers are promising candidates for light-emitting devices (LEDs) due to their direct band gap with efficient recombination in the red spectral range. Here, we present a novel LED architecture by embedding exfoliated WS2 monolayer flakes into a vertical p-n layout using organic p- and inorganic n-supporting layers. Laser lithography was applied to define the current path perpendicular to the WS2 flake. The devices exhibit rectifying behavior and emit room temperature electroluminescence with luminance up to 50 cd m-2 in the red spectral range.