A detailed investigation of gamma and neutron shielding capabilities of ternary composites doped with polyacrylonitrile and gadolinium (III) sulfate.

The shielding efficiencies of gamma and neutron radiations for ternary composites containing polyester resin, polyacrylonitrile and gadolinium (III) sulfate at different ratios were investigated in the present study. In order to investigate the gamma radiation shielding capacity of the produced ternary composites, linear and mass attenuation coefficients, half value layer, effective atomic number and radiation protection efficiency parameters were determined experimentally, theoretically and using the GEANT4 simulation code. The gamma shielding capabilities of the composites were studied in the photon energy range of 59.5-1332.5 keV. In order to investigate the neutron shielding abilities of composites, inelastic, elastic, capture and transport numbers, total macroscopic cross section and mean free path parameters were determined with the help of GEANT4 simulation code. In addition, the number of transmitted neutrons at different sample thicknesses and neutron energies were also determined. It was observed that gamma radiation shielding properties were improved due to the increasing amount of gadolinium (III) sulfate and neutron shielding properties were improved due to the increasing amount of polyacrylonitrile. While the composite coded P0Gd50 exhibits a better gamma radiation shielding ability than the others, the neutron shielding of the sample coded P50Gd0 is also more favorable than the others.

A comparative neutron and gamma-ray radiation shielding investigation of molybdenum and boron filled polymer composites.

This work presents a detailed radiation shielding study for polymer composites filled with Boron and Molybdenum additives. The chosen novel polymer composites were produced at different percentages of the additive materials to provide a proper evaluation of their neutron and gamma-ray attenuation abilities. The effect of additive particle size on the shielding characteristics was further investigated. On the gamma-ray side, simulation, theoretical and experimental evaluations were performed in a wide range of photon energies varying from 59.5 keV to 1332.5 keV with help of MC simulations (GEANT4 and FLUKA), WinXCOM code, a High Purity Germanium Detector, respectively. A remarkable consistency was reported between them. On the neutron shielding side, the prepared samples produced with nano and micron particle size additives were additionally examined by providing fast neutron removal cross-section (ΣR) and the simulated neutron transmissions through the prepared samples. The samples filled with nano sized particles show better shielding capability than the one filled with micron sized particles. In other words, a new polymer shielding material that does not contain toxic content is introduced: the sample codded N-B0Mo50 exhibits superior radiation attenuation.

Shielding features, to non-ionizing and ionizing photons, of FeCr-based composites.

This paper has been focused on the a detail study on non-ionizing and ionizing electromagnetic (EM) shielding features and build-up factors of reinforced with ferrochrome (FeCr) composites. The non-inozing electromagnetic shielding performance quantities of composites have been determined in the frequency range between 12.4 and 18.0 GHz. Also, the experimental mass attenuation coefficients (MAC) have been estimated using gamma spectrometer and various radioactive point, and compared to those of theoretical and simulation (MCNPX) results. With help of the obtained linear attenuation coefficients, several attenuation quantities, i.e., effective atomic number (Zeff), half value layer (HVL), and mean free path (MFP) have been discussed. In addition, buildup factors (EBF and EABF) values have been estimated utilizing the G-P fitting method. The results showed that composite encoded FeCr(15%) is superior shielding attenuation properties among the investigated samples.

Determination of Kα,ß excitation factors in thin target for selected elements from Y to Te at 59.54 keV excitation energy.

The paper presents the first measurements of the Kα and Kß excitation factors for some selected elements from Y to Te. To determine the Kα and Kß excitation factors, the experimental values of K shell X-ray production cross sections and total absorption photoelectric cross sections were used. The measurements were performed using a Si(Li) detector coupled with 2048 multichannel analyzer and an Am-241 annular radioisotope source which is emitted 59.54 keV γ-photons. It is observed that the Kα excitation factors are 5-6 times larger than the Kß excitation factors. The measured excitation factors were compared only with theoretical calculated ones since there are no other experimental reports for the present elements in the literature. The present experimental values of Kα and Kß excitation factors are in satisfactory agreement with the theoretical results.

Studies on effective atomic numbers, electron densities from mass attenuation coefficients near the K edge in some samarium compounds.

The effective atomic numbers and electron densities of some samarium compounds were determined using the experimental total mass attenuation coefficient values near the K edge in the X-ray energy range from 36.847 up to 57.142 keV. The measurements, in the region from 36.847 to 57.142 keV, were done in a transmission geometry utilizing the Kα2, Kα1, Kß1 and Kß2 X-rays from different secondary source targets excited by the 59.54 keV gamma-photons from an Am-241 annular source. This paper presents the first measurement of the effective atomic numbers and electron densities for some samarium compounds near the K edge. The results of the study showed that the measured values were in good agreement with the theoretically calculated ones.

L-shell polarization and alignment of heavy elements induced by 59.54keV photons.

The polarization (%) of L-shell fluorescent X-rays (Lα, Lß and Ll) of Lu, Hf, Ta, W, Os, Pt, Au, Hg, Tl, Pb, Bi, Th and U excited by 59.54keV photons has been measured. These polarization degrees were then used to determine the alignment parameters A(2.) The Ll X-rays were found to be strongly polarized, whereas Lα and Lß X-rays showed less polarization. In this regard, the Lα, Lß and Ll groups show anisotropic spatial distributions. The results for polarization (%) as well as alignment parameters were compared with the ones available in literature.