Unraveling Non-Uniform Strain-Induced Crystallization Near a Crack Tip in Natural Rubber.

Strain-induced crystallization (SIC) in natural rubber (NR) near crack tips significantly enhances crack growth resistance, but understanding the interplay between local strain field and crystallization remains challenging due to confined and heterogeneous characteristics. Using micro-scale digital image correlation (DIC) and scanning wide-angle X-ray diffraction (WAXD, with a narrow 10 µm square beam), this study maps local strain tensor properties and SIC in the vicinity of the crack tip and its peripheral zone (≈3 mm × 1 mm area). The analysis reveals a significant correlation between these properties. In the peripheral zone, there is a noticeable deviation of both the principal strain axis and the crystal orientation from the crack opening direction. These deviations are linearly correlated, which indicates that shear strain plays a significant role in determining the crystal orientation. Crucially, the maximum tensile component in the tensor of local principal strains predominantly dictates local crystallinity. This simplicity is attributed to the limited variation in types of deformation within the SIC region, with corresponding to deformations falling between planar and uniaxial stretching. These findings pave the way for predicting crystallinity distribution using solely strain field data, offering valuable insights into the role of SIC in enhancing the crack growth resistance of NR.

Marine biodegradation of poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate] elastic fibers in seawater: dependence of decomposition rate on highly ordered structure.

Here, we report the marine degradability of polymers with highly ordered structures in natural environmental water using microbial degradation and biochemical oxygen demand (BOD) tests. Three types of elastic fibers (non-porous as-spun, non-porous drawn, and porous drawn) with different highly ordered structures were prepared using poly[(R)-3-hydroxybutyrate-co-16 mol%-4-hydroxybutyrate] [P(3HB-co-16 mol%-4HB)], a well-known polyhydroxyalkanoate. Scanning electron microscopy (SEM) images indicated that microorganisms attached to the fiber surface within several days of testing and degraded the fiber without causing physical disintegration. The results of BOD tests revealed that more than 80% of P(3HB-co-16 mol%-4HB) was degraded by microorganisms in the ocean. The plastisphere was composed of a wide variety of microorganisms, and the microorganisms accumulated on the fiber surfaces differed from those in the biofilms. The microbial degradation rate increased as the degree of molecular orientation and porosity of the fiber increased: as-spun fiber < non-porous drawn fiber < porous drawn fiber. The drawing process induced significant changes in the highly ordered structure of the fiber, such as molecular orientation and porosity, without affecting the crystallinity. The results of SEM observations and X-ray measurements indicated that drawing the fibers oriented the amorphous chains, which promoted enzymatic degradation by microorganisms.

Artifact removal in the contour areas of SAXS-CT images by Tikhonov-L1 minimization.

Small-angle X-ray scattering (SAXS) coupled with computed tomography (CT), denoted SAXS-CT, has enabled the spatial distribution of the characteristic parameters (e.g. size, shape, surface, length) of nanoscale structures inside samples to be visualized. In this work, a new scheme with Tikhonov regularization was developed to remove the effects of artifacts caused by streak scattering originating from the reflection of the incident beam in the contour regions of the sample. The noise due to streak scattering was successfully removed from the sinogram image and hence the CT image could be reconstructed free from artifacts in the contour regions.

Mechanism of Elastic Properties of Biodegradable Poly[(R)-3-Hydroxybutyrate-co-4-hydroxybutyrate] Films Revealed by Synchrotron Radiation.

Reversible elastic films of biobased and biodegradable poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate] [P(3HB-co-4HB)] were prepared by uniaxial drawing procedures. Mechanical properties and highly ordered film structures were investigated by tensile testing and both static-state and in situ wide-angle X-ray diffraction and small-angle X-ray scattering with synchrotron radiation during stretching and relaxing. Despite the crystalline nature of the polymers, the elongation at break of these films was greater than 1500%. Reversible elasticity was achieved after the first 10 times of uniaxial stretching. X-ray measurement results indicated that on stretching, ß-form molecular chains with a planar zigzag conformation were introduced from molecular chains with random coils in the amorphous regions between α-form lamellar crystals. Notably, the orientation of the α-form lamellar crystals increased after relaxation of the molecular chains with a planar zigzag conformation (ß-form) between the lamellar crystals (α-form). Reversible elastic properties were regenerated by a planar zigzag conformation between the lamellar crystals, the extension of molecular chains in lamellar crystals by the rotation of molecular conformation, and changes in the degree of orientation of the lamellar crystals.

Surface Segregation of a Star-Shaped Polyhedral Oligomeric Silsesquioxane in a Polymer Matrix.

A simple way to control only the surface properties of polymer materials, without changing the bulk properties, has long been desired. The segregation behavior when a component with a tiny amount fed into the matrix is thermodynamically enriched at the surface is one of the candidate methods. This capability was examined herein by focusing on a star-shaped polyhedral oligomeric silsesquioxane (s-POSS), where the central POSS unit is tethered to eight isobutyl-substituted POSS cages as a surface modifier. X-ray photoelectron spectroscopy revealed that the surface of a film of poly(methyl methacrylate) (PMMA) was almost completely covered with POSS units by adding just 5 wt % s-POSS to it. The segregated POSS dramatically altered the physical properties such as molecular motion and the mechanical and dielectric responses at the surface of the PMMA film. These findings make it clear that s-POSS is an excellent surface modifier for glassy polymers.

Enzymatic Self-Biodegradation of Poly(l-lactic acid) Films by Embedded Heat-Treated and Immobilized Proteinase K.

Non-biodegradable microplastics have become a global problem. We propose a new enzyme-embedded biodegradable plastic that can be self-biodegraded anytime and anywhere. Proteinase K from Tritirachium album was embedded in poly(l-lactic acid) (PLLA). The PLLA solution-cast film with embedded proteinase K showed weight loss of 78% after 96 h incubation. In addition, PLLA extruded films embedding immobilized proteinase K encapsulated in polyacrylamide were produced at 200 °C and embedded-enzyme degradation was monitored. Immobilized proteinase K embedded in the extruded film maintained its degradation activity and degraded the PLLA film from inside to make small holes and cavities, suggesting that immobilization is a powerful technique to prepare thermoforms with embedded enzymes. The rate of embedded-enzyme degradation was accelerated by dividing the film into smaller pieces, which can be regarded as a model experiment for biodegradation of microplastics. Various biodegradable plastics with specific embedded enzymes will contribute to solve global environmental problems.

Improving grazing-incidence small-angle X-ray scattering-computed tomography images by total variation minimization.

Grazing-incidence small-angle X-ray scattering (GISAXS) coupled with computed tomography (CT) has enabled the visualization of the spatial distribution of nanostructures in thin films. 2D GISAXS images are obtained by scanning along the direction perpendicular to the X-ray beam at each rotation angle. Because the intensities at the q positions contain nanostructural information, the reconstructed CT images individually represent the spatial distributions of this information (e.g. size, shape, surface, characteristic length). These images are reconstructed from the intensities acquired at angular intervals over 180°, but the total measurement time is prolonged. This increase in the radiation dosage can cause damage to the sample. One way to reduce the overall measurement time is to perform a scanning GISAXS measurement along the direction perpendicular to the X-ray beam with a limited interval angle. Using filtered back-projection (FBP), CT images are reconstructed from sinograms with limited interval angles from 3 to 48° (FBP-CT images). However, these images are blurred and have a low image quality. In this study, to optimize the CT image quality, total variation (TV) regularization is introduced to minimize sinogram image noise and artifacts. It is proposed that the TV method can be applied to downsampling of sinograms in order to improve the CT images in comparison with the FBP-CT images.

In vitro synthesis of linear α-1,3-glucan and chemical modification to ester derivatives exhibiting outstanding thermal properties.

Bio-based polymer is considered as one of potentially renewable materials to reduce the consumption of petroleum resources. We report herein on the one-pot synthesis and development of unnatural-type bio-based polysaccharide, α-1,3-glucan. The synthesis can be achieved by in vitro enzymatic polymerization with GtfJ enzyme, one type of glucosyltransferase, cloned from Streptococcus salivarius ATCC 25975 utilizing sucrose, a renewable feedstock, as a glucose monomer source, via environmentally friendly one-pot water-based reaction. The structure of α-1,3-glucan is completely linear without branches with weight-average molecular weight (Mw) of 700 kDa. Furthermore, acetate and propionate esters of α-1,3-glucan were synthesized and characterized. Interestingly, α-1,3-glucan acetate showed a comparatively high melting temperature at 339 °C, higher than that of commercially available thermoplastics such as PET (265 °C) and Nylon 6 (220 °C). Thus, the discovery of crystalline α-1,3-glucan esters without branches with high thermal stability and melting temperature opens the gate for further researches in the application of thermoplastic materials.

One-pot microbial production, mechanical properties, and enzymatic degradation of isotactic P[(R)-2-hydroxybutyrate] and its copolymer with (R)-lactate.

P[(R)-2-hydroxybutyrate] [P((R)-2HB)] is an aliphatic polyester analogous to poly(lactic acid) (PLA). However, little has been known for its properties because of a high cost of commercially available chiral 2HB as a starting substance for chemical polymer synthesis. In this study, P[(R)-2HB] and P[(R)-2HB-co-(R)-lactate] [P((R)-2HB-co-(R)-LA)] with a new monomer combination were successfully synthesized in recombinant Escherichia coli LS5218 from less-expensive racemic 2HB using an R-specific polyester synthase. The cells expressing an engineered polyhydroxyalkanoate synthase from Pseudomonas sp. 61-3 and propionyl-CoA transferase from Megasphaera elsdenii were grown on LB medium containing 2HB and glucose in a shake flask and accumulated up to 17 wt % of P[(R)-2HB] with optical purity of >99.1%. In addition, the same cells cultured in a jar-fermentor produced P(86 mol % 2HB-co-LA) copolymer. Notably, the molecular weights (Mw) of P(2HB) (27000) and P(2HB-co-LA) (39000) were 2- and 3-fold higher than that of P(2HB) previously synthesized by chemical polycondensation. P(2HB) was processed into a transparent film by solvent-casting and it had flexible properties with elongation at break of 173%, which was contrast to the rigid PLA. Regarding mechanical properties, P(2HB-co-LA) was tougher but less stretchy than P(2HB). These results demonstrated that P(2HB) has useful properties and LA units in 2HB-based polymers can act as a controllable modulator of the material properties. In addition, P[(R)-2HB] was efficiently degraded by treatment of Novozym 42044 (lipase) but not Savinase 16L (protease), indicating that the degrading behavior of the polymer was similar to that of P[(R)-LA].