Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Oral Sci ; 65(3): 153-157, 2023 Jul 01.
Artigo em Inglês | MEDLINE | ID: mdl-37258232

RESUMO

PURPOSE: This study aimed at evaluating the effects of surface treatments with tetrabutylammonium dihydrogen trifluoride (TDTF) on the bond strengths of indirect resin composites with titanium-aluminum-vanadium (Ti-6Al-4V) and cobalt-chromium (Co-Cr) alloys. METHODS: Disk-shaped Ti-6Al-4V and Co-Cr alloy specimens were air-abraded with alumina, treated with an etchant (MEP) containing TDTF for 10 s (MEP10) or 30 s (MEP30), and rinsed with water. Subsequently, a primer containing 6-methacryloyloxyhexyl phosphonoacetate was applied to the surfaces, and the specimens were veneered with a light-curing indirect resin composite. Specimens without MEP were prepared as controls (no-MEP). Shear bond strengths were determined before or after 100,000 thermocycles, and the data were analyzed using the Steel-Dwass test (α = 0.05, n = 10). RESULTS: No significant difference was found in the bond strengths between the Ti-6Al-4V and Co-Cr alloys. In each metal alloy, the MEP10 and MEP30 specimens exhibited higher bond strengths than the no-MEP controls after 100,000 thermocycles. Scanning electron microscopy observations revealed that submicron-pits and crevices were formed on both the metal alloys upon applying the MEP etchant. CONCLUSION: Surface treatments with TDTF following air abrasion are useful for improving bonding durability while veneering resin composites on Ti-6Al-4V or Co-Cr alloy frameworks.


Assuntos
Ligas de Cromo , Titânio , Ligas de Cromo/química , Titânio/química , Ligas Dentárias/química , Alumínio , Vanádio , Abrasão Dental por Ar , Propriedades de Superfície , Resinas Compostas , Teste de Materiais
3.
Clin Oral Investig ; 26(10): 6327-6337, 2022 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-35751704

RESUMO

OBJECTIVES: In this clinical study, the 8-year clinical performances of a flowable resin composite was compared with that of a conventional resin composite. MATERIALS AND METHODS: Ninety non-carious cervical lesions (NCCLs) in 19 participants were involved in this trial. NCCLs were restored with a flowable composite (Clearfil Flow FX: FX, Kuraray Noritake, Japan) or a conventional resin composite (Clearfil AP-X: AP) in conjunction with a one-step self-etch adhesive (Clearfil S3 Bond). Each participant had both types of resin composite restorations that were randomly allocated. The restorations were evaluated at baseline and annually up to 8 years using modified USPHS criteria. The data were statistically analyzed using the Fisher's exact test, Kaplan-Meier method, and a multivariate Cox-regression with frailty models (p < 0.05). RESULTS: The 8-year participant recall rate was 95%. One hundred percent retention was recorded for AP, whereas four out of 46 restorations were lost for FX during the 8 years. The incidence of marginal staining increased over time regardless of the type of resin composite, showing 48% for AP and 57% for FX after 8 years. Wear of the resin composite occurred only for the flowable material and there was a significant difference between the types of resin composite (p = 0.024). Overall survival rates at 8 years for AP and FX were 98% and 82% respectively (p = 0.110). CONCLUSIONS: The flowable resin composite presented lower wear resistance and showed a lower survival rate compared with the conventional composite after eight years of clinical service. CLINICAL RELEVANCE: Flowable resin composites may show greater wear after long-term clinical service. TRIAL REGISTRATION NUMBER: UMIN000028745, Date of registration: August 19, 2017.


Assuntos
Restauração Dentária Permanente , Colo do Dente , Resinas Compostas/química , Adaptação Marginal Dentária , Restauração Dentária Permanente/métodos , Adesivos Dentinários , Diagnóstico Bucal , Humanos , Japão , Cimentos de Resina/química , Colo do Dente/patologia
4.
J Oral Sci ; 64(2): 167-171, 2022.
Artigo em Inglês | MEDLINE | ID: mdl-35370182

RESUMO

PURPOSE: This study compared the bond strengths of four adhesive systems and four different resin composite block materials: Gradia Block (GR), Shofu Block HC (SH), Estelite Block (ES), and KZR-CAD HR2 (KZ). METHODS: A primer (PZ-AB) containing a silane (γ-MPTS) with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) was applied to ground surfaces of the resin composite block specimens, and the specimens were then bonded to stainless-steel rods using two methyl methacrylate-tributylborane (MMA-TBB)-based luting agents (SB and MT), designated as the PZ-AB/SB and PZ-AB/MT adhesive systems, respectively. The SB resin contained 4-methacryloyloxyethyl trimellitate anhydride (4-META), whereas the MT resin did not. The SB resin without primer (No primer/SB) and a dual-curing composite-type adhesive system (UPA/RelyX) were used as controls. The 24-h tensile bond strengths were determined and analyzed using the Tukey-Kramer HSD test (α = 0.05, n = 8). RESULTS: The highest bond strengths were obtained for the GR/PZ-AB/MT, GR/PZ-AB/SB, KZ/PZ-AB/MT, ES/PZ-AB/SB, and KZ/No primer/SB groups, whereas the KZ/UPA/RelyX, ES/UPA/RelyX, SH/UPA/RelyX, and SH/No primer/SB groups exhibited the lowest bond strengths. CONCLUSION: For each resin composite block material primed with γ-MPTS and MDP, the MMA-TBB-based luting agents, irrespective of the presence of 4-META, provided higher bond strengths than the dual-curing composite-type adhesive system.


Assuntos
Colagem Dentária , Cimentos Dentários , Compostos de Boro , Cimentos Dentários/química , Teste de Materiais , Metacrilatos/química , Metilmetacrilato/química , Fosfatos , Silanos/química
6.
J Dent Sci ; 14(1): 109-112, 2019 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-30988891

RESUMO

This study investigated the effect of titanium surface treatment with tetrabutylammonium dihydrogen trifluoride (TDTF) on the bond between the titanium and resins for dental applications. Commercially pure titanium (cpTi) specimens were air-abraded with alumina particles, surface-treated with an etchant containing TDTF (Monobond Etch & Prime; ETCH) for 10 s (ETCH10) or 30 s (ETCH30), rinsed with water, treated with a phosphoric monomer-based primer, and bonded to an indirect resin composite. Non-ETCH-treated specimens (no-ETCH) were prepared as a control. The shear bond strengths were determined before and after 100,000 thermocycles, and the means and standard deviations for eight specimens were calculated and statistically analyzed using a non-parametric Steel-Dwass test (α = 0.05). The ETCH10 and ETCH30 specimens exhibited the highest bond strengths, which were maintained for 100,000 thermocycles, while significantly lower values were obtained for no-ETCH specimens. In conclusion, the surface treatment with a TDTF-containing etchant considerably improved the durability of the resin-cpTi bond strength. Appropriate surface treatment of cpTi should be selected for achieving longer-lasting treatments and better clinical solutions for patients.

7.
Biomed Res Int ; 2014: 187989, 2014.
Artigo em Inglês | MEDLINE | ID: mdl-24818130

RESUMO

It is well known that D-glucosamine hydrochloride (DGL) has a variety of biological activities and is regarded as a nutritional supplement effective in improving various disorders, including osteoarthritis and atherosclerosis. Although it has been reported that DGL has a significant pain relief effect in treating osteoarthritis, little is known about the characteristics of the effects of this compound on dental pain. The present study was undertaken to evaluate the applicability of DGL as a medicament to control pulpalgia. Using an in vitro rat mandible-inferior alveolar nerve preparation (jaw-nerve preparation), we evaluated the effects of DGL on 5-hydroxytryptamine (5-HT) sensitive nociceptive responses in the tooth pulpal nerve. 5-HT-induced nociceptive responses were fairly suppressed by direct application of DGL, suggesting that DGL have a pain relief effect on patients with dental pain.


Assuntos
Polpa Dentária/efeitos dos fármacos , Polpa Dentária/inervação , Glucosamina/farmacologia , Tecido Nervoso/fisiologia , Nociceptividade/efeitos dos fármacos , Serotonina/farmacologia , Potenciais de Ação , Animais , Masculino , Tecido Nervoso/efeitos dos fármacos , Ratos Wistar
8.
J Integr Neurosci ; 12(2): 235-46, 2013 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-23869863

RESUMO

In the limbic system, the anterior cingulate cortex (ACCX) is one of the key areas involved in the close association between pain and emotion. However, neuronal changes in ACCX nociceptive responses after stress conditioning have not yet been quantitatively investigated. We investigated the modulation of nociceptive responses in the ACCX neurons following restraint stress in rats. The present study demonstrated that stress-conditioning enhanced excitatory nociceptive responses in the ACCX following tail stimuli in the mid-term (7 days). Short-term (3 days) and long-term (21 days) of stress conditioning did not affect these responses significantly. Nociceptive responses evoked by other sites of the body (nose, back and four paws) stimulation were not changed by stress-conditioning, indicating that neural information from the tail is important for emotional system modulation. It is suggested that the emotional/affective part of the pain sensation is strongly modified by stress through neuroplasticity in the ACCX.


Assuntos
Giro do Cíngulo/fisiopatologia , Nociceptividade/fisiologia , Dor/fisiopatologia , Estresse Fisiológico , Potenciais de Ação/fisiologia , Vias Aferentes/fisiologia , Análise de Variância , Animais , Mapeamento Encefálico , Extremidades/inervação , Lateralidade Funcional , Neurônios/fisiologia , Nariz/inervação , Dor/psicologia , Estimulação Física/efeitos adversos , Ratos , Ratos Wistar , Tronco/inervação
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...