Fabrication and optimization of extended-release beads of diclofenac sodium based on Ca++ cross-linked Taro (Colocasia esculenta) stolon polysaccharide and pectin by quality-by-design approach.

The present investigation was aimed to fabricate and optimize extended-release beads of diclofenac sodium based on an ion-cross-linked matrix of pectin (PTN) and taro (Colocasia esculenta) stolon polysaccharide (TSP) with 23 full factorial design. Total polysaccharide concentration (TPC), polysaccharide ratio (PR), and cross-linker concentration ([CaCl2]) were taken as independent factors with two levels of each. Initially, TSP was extracted, purified, and characterized. Fourier-transform infrared spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) showed drug-polymer compatibility. The study also revealed the significant positive effect of TSP on drug entrapment efficiency (DEE) and sustaining drug release. The response variables (DEE, cumulative % drug-release at 1, 2, 4, 6, and 10 h, release-constant, time for 50 % and 90 % drug release (T50%, T90%), release-similarity factor (f2), and difference factor (f1) were analyzed, and subsequently, independent fabrication variables were numerically optimized by Design-Expert software (Version-13; Stat-Ease Inc., Minneapolis). The optimized batch exhibited appreciable DEE of 88.5 % (± 2.2) and an extended-release profile with significantly higher T50%, T90%, and release-similarity factor (f2) of 4.7 h, 11.4 h, and 71.6, respectively. Therefore, the study exhibited successful incorporation of the novel TSP as a potential alternative adjunct polysaccharide in the pectin-based ion-cross-linked inter-penetrating polymeric network for extended drug release.

Premix technologies for drug delivery: manufacturing, applications, and opportunities in regulatory filing.

Active pharmaceutical ingredients (APIs) and excipients can be carefully combined in premix-based materials before being added to dosage forms, providing a flexible platform for the improvement of drug bioavailability, stability, and patient compliance. This is a promising and transformative approach in novel and generic product development, offering both the potential to overcome challenges in the delivery of complex APIs and viable solutions for bypassing patent hurdles in generic product filing. We discuss the different types of premixes; manufacturing technologies such as spray drying, hot melt extrusion, wet granulation, co-crystal, co-milling, co-precipitation; regulatory filing opportunities; and major bottlenecks in the use of premix materials in different aspects of pharmaceutical product development.

Surface engineered nanodiamonds: mechanistic intervention in biomedical applications for diagnosis and treatment of cancer.

In terms of biomedical tools, nanodiamonds (ND) are a more recent innovation. Their size typically ranges between 4 to 100 nm. ND are produced via a variety of methods and are known for their physical toughness, durability, and chemical stability. Studies have revealed that surface modifications and functionalization have a significant influence on the optical and electrical properties of the nanomaterial. Consequently, surface functional groups of NDs have applications in a variety of domains, including drug administration, gene delivery, immunotherapy for cancer treatment, and bio-imaging to diagnose cancer. Additionally, their biocompatibility is a critical requisite for theirin vivoandin vitrointerventions. This review delves into these aspects and focuses on the recent advances in surface modification strategies of NDs for various biomedical applications surrounding cancer diagnosis and treatment. Furthermore, the prognosis of its clinical translation has also been discussed.

Exploring the interaction between extracellular matrix components in a 3D organoid disease model to replicate the pathophysiology of breast cancer.

In vitro models are necessary to study the pathophysiology of the disease and the development of effective, tailored treatment methods owing to the complexity and heterogeneity of breast cancer and the large population affected by it. The cellular connections and tumor microenvironments observed in vivo are often not recapitulated in conventional two-dimensional (2D) cell cultures. Therefore, developing 3D in vitro models that mimic the complex architecture and physiological circumstances of breast tumors is crucial for advancing our understanding of the illness. A 3D scaffold-free in vitro disease model mimics breast cancer pathophysiology by allowing cells to self-assemble/pattern into 3D structures, in contrast with other 3D models that rely on artificial scaffolds. It is possible that this model, whether applied to breast tumors using patient-derived primary cells (fibroblasts, endothelial cells, and cancer cells), can accurately replicate the observed heterogeneity. The complicated interactions between different cell types are modelled by integrating critical components of the tumor microenvironment, such as the extracellular matrix, vascular endothelial cells, and tumor growth factors. Tissue interactions, immune cell infiltration, and the effects of the milieu on drug resistance can be studied using this scaffold-free 3D model. The scaffold-free 3D in vitro disease model for mimicking tumor pathophysiology in breast cancer is a useful tool for studying the molecular basis of the disease, identifying new therapeutic targets, and evaluating treatment modalities. It provides a more physiologically appropriate high-throughput platform for screening large compound library in a 96-384 well format. We critically discussed the rapid development of personalized treatment strategies and accelerated drug screening platforms to close the gap between traditional 2D cell culture and in vivo investigations.

Exploring novel and fast stability or sameness evaluation tool for different categories of injectable formulations.

The establishment of drug product stability and sameness is the heart of generic formulation development. For regulatory filing, various instrumental methods are used on a case basis to establish the generic and innovator product sameness in multiple aspects. Here in the present study, we explored the applicability of the Time-correlated single photon counting (TCS-PC) technique as a fast, reliable, and nondestructive method for establishing the sameness of three different categories of injectable formulations, namely, Amphotericin B liposome for injection, enoxaparin injection, and iron sucrose injection. All three category formulations were evaluated in their native and artificially induced post degradation state to identify the discrimination power of the used instrumental techniques. The degradation of materials were confirmed by high performance liquid chromatography (HPLC). Based on the product category, pre and post-degradation samples were evaluated by selective instrumental methods like differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), fluorescence spectroscopy, particle size analysis by dynamic light scattering (DLS), small angle X-ray scattering (SAXS), Raman spectroscopy, inductively coupled plasma optical-emission spectrometry (ICP-OES) and circular dichroism study. All pre and post-degradation samples were further analyzed by TCS-PC. We observed that, TCS-PC can identify the differences between the initial and post degradation samples in very less time with promising discrimination power across the different injectable formulation types. Thus TCS-PC can be used as a fast and promising stability or sameness evaluation tool for different injectable drug products.

Bootstrap Statistics and Its Application in Disintegration and Dissolution Data Analysis.

Disintegration time (DT) and rate of drug dissolution in different media are among the most widely studied crucial parameters for various types of drug products. In the ever-evolving landscape of generic formulation development, dissolution comparison of reference and test products is the major reliable in vitro method of establishing product similarity. This is one of the most widely accepted methods of proving pharma equivalency between two drug products. A well-studied match between the disintegration and dissolution profile of the test and reference formulations can ensure in vitro product similarity. Various statistical approaches have been employed to establish product performance similarity; among them, the similarity factor (f2) calculation based approach is the most widely accepted and explored method to date. However, the f2 statistics fail to predict the similarity of batches with unit-to-unit variability. Bootstrap statistical analysis of dissolution data between the test and reference products was introduced to overcome the problems associated with batches with unit variability. Bootstrap can also be applied to extract statistically significant results by treating a series of data from different batches, which can further help to understand the trend. The current review depicts different case study based approaches to show the applications of bootstrap statistics in disintegration and dissolution similarity evaluation for both conventional and additively manufactured solid dosage forms. It is concluded that bootstrap statistics can be a very promising and reliable data analytical tool for establishing in vitro product similarity for both conventional and additively manufactured formulations with a high level of intraunit variability.

Current pharmaceutical design on adhesive based transdermal drug delivery systems.

Drug-in-adhesive transdermal drug delivery matrix exploits intimate contact of the carrier with stratum corneum, the principal skin barrier to drug transport, to deliver the actives across the skin and into the systemic circulation. The main application challenges of drug-in-adhesive matrix lie in the physicochemical properties of skin varying with age, gender, ethnicity, health and environmental condition of patients. This in turn poses difficulty to design a universal formulation to meet the intended adhesiveness, drug release and drug permeation performances. This review focuses on pressure-sensitive adhesives, and their adhesiveness and drug release/permeation modulation mechanisms as a function of adhesive molecular structure and formulation attributes. It discusses approaches to modulate adhesive tackiness, strength, elasticity, hydrophilicity, molecular suspension capability and swelling capacity, which contribute to the net effect of adhesive on skin bonding, drug release and drug permeation.

Comparative bio-safety and in vivo evaluation of native or modified locust bean gum-PVA IPN microspheres.

Strategically developed natural polymer-based controlled release multiparticulate drug delivery systems have gained special interest for "spatial placement" and "temporal delivery" of drug molecules. In our earlier study, locust bean gum-poly(vinyl alcohol) interpenetrating polymer network (LBG-PVA IPN), carboxymethylated locust bean gum-poly(vinyl alcohol) interpenetrating polymer network (CMLBG-PVA IPN) and acrylamide grafted locust bean gum-poly(vinyl alcohol) interpenetrating polymer network (Am-g-LBG-PVA IPN) were prepared and characterized. The present study deals with accelerating stability testing, comparative bio-safety and single dose in vivo pharmacokinetic study of all three IPN microspheres for controlled oral delivery of buflomedil hydrochloride (BH). From the stability study, it was observed that the particles were stable throughout the study period. From toxicity and biodegradability study it was proved that the microspheres were safe for internal use and complied with bio-safety criterion. From the in vivo pharmacokinetic study in rabbits, it was observed that the CMLBG-PVA IPN microspheres possessed almost similar Tmax value with BH oral suspension. However, in comparison between the LBG-PVA and Am-g-LBG-PVA IPN microspheres, the later showed well controlled release property than the first in biological condition. Thus, this type of delivery system might be useful to achieve the lofty goals of the controlled release drug delivery.

Synthesis, characterization and evaluation of methacrylamide grafted gellan as sustained release tablet matrix.

In the present study, the microwave induced synthesis of polymethacrylamide-grafted-gellan gum (PMaa-g-GG) was carried out by free radical initiation using cerric (IV) ammonium nitrate (CAN) as redox initiator. Concentrations of methacrylamide (Maa), CAN and microwave irradiation time were taken as variable synthetic parameters. The modified polysaccharide obtained from different synthetic conditions was then characterized by FTIR, CHN analysis, DSC and powder X-ray diffraction. The yield and extent of grafting were assessed by determining percentage grafting, percentage grafting efficiency, percentage conversion and these were correlated with elemental analysis. The acute oral toxicity study of modified polysaccharide was performed as per OECD guideline. Histological comparison of different organs between control and test animal showed no significant difference. Sustained release tablets of diclofenac sodium (DS) were prepared with modified gellan. In vitro dissolution study showed the tablets were capable of releasing the drug over a period of 8 h.

Microwave assisted synthesis of acrylamide grafted locust bean gum and its application in drug delivery.

Acrylamide grafted copolymer of locust bean gum was prepared by microwave irradiation using ceric ammonium nitrate as redox initiator. The grafting process was optimized in terms of irradiation time, amount of initiator and acrylamide by using constant amount of native locust bean gum. The grafted gum was characterized by Fourier transform infrared spectroscopy (FT-IR), (13)C nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), X-ray diffraction study (XRD), differential scanning calorimetry (DSC), elemental analysis, contact angle, viscosity, molecular weight, swelling and biodegradability studies. The grafted gum was found to be biodegradable and non-toxic. It was further used to prepare controlled-release matrix tablet of buflomedil hydrochloride. The in vitro release profile of the tablet showed the rate controlling property of acrylamide grafted locust bean gum was similar to that of hydroxypropyl methylcellulose (HPMC-K15M).

Interpenetrating polymer network of locust bean gum-poly (vinyl alcohol) for controlled release drug delivery.

A novel interpenetrating polymer network (IPN) microspheres of locust bean gum (LBG) and poly (vinyl alcohol) (PVA) was developed for oral controlled release of buflomedil hydrochloride (BH) by emulsion crosslinking method using glutaraldehyde as crosslinker. The effects of gum-polymer ratio, concentration of crosslinker and internal phase viscosity were evaluated thoroughly. Drug entrapment efficiency, particle size distribution, swelling property and in vitro release characteristics with kinetic modelling of microspheres were evaluated. The microspheres were characterised by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), solid state C(13) NMR, X-ray diffraction study (XRD) and differential scanning colorimetry (DSC). The microspheres showed control release property without showing any incompatibility in IPN device. Hence, IPN microspheres of LBG and PVA can be used as a potential carrier for controlled oral delivery of highly water soluble drugs like BH.

Microwave-induced solid dispersion technology to improve bioavailability of glipizide.

OBJECTIVES: The effect of microwave (MW) irradiation and conventional heating (CH) on solid dispersion (SD) of poorly water-soluble glipizide (GPZ) and polyethylene glycol 4000 (PEG 4000) were studied in detail. METHODS: The chemical stability of GPZ on exposure to MW irradiation and CH was confirmed by high-performance liquid chromatography, Fourier transform infra red spectroscopy, proton nuclear magnetic resonance and mass spectroscopy studies. Comparative bioavailability studies were performed in rabbits using glipizide sustained-release tablets prepared using MW irradiation (MW-SD) or CH (CH-SD), with Glytop 2.5 mg SR as a reference. KEY FINDINGS: The MW-assisted melt mixing showed higher efficiency than CH in obtaining a homogeneous mixture having glass transparency. The polymorphic transformation of GPZ in each case was further confirmed by powder X-ray diffraction study. The solubility of GPZ in phosphate buffer pH 6.8 was greater for MW-SD (72.250 ± 0.154 µg/ml) than CH-SD (46 ± 0.201 µg/ml). The MW-SD matrix tablet (2.5 mg) displayed retarded drug release (releasing 99.320 ± 4.992% drug in 12 h). In-vivo pharmacokinetic study in rabbits revealed that the relative bioavailability of GPZ from MW-SD tablets improved greatly (153.73 ± 9.713%). CONCLUSIONS: MW-induced SD technology could be a better alternative to CH-SD for the enhanced solubility and bioavailability of GPZ.

Microwave assisted synthesis and characterization of acrylamide grafted gellan, application in drug delivery.

The synthesis of acrylamide-grafted-gellan gum was carried out by microwave-assisted free radical polymerization using cerric ammonium nitrate (CAN) as redox initiator. A series of graft copolymers, varying in amount of acrylamide, CAN and microwave irradiation time was prepared. The modified gum was extracted with 20% (v/v) methanol to remove the homopolymer formed during polymerization reaction. These graft copolymers were characterized by FTIR, (13)C NMR, CHN, SEM, rheological studies and DSC studies. Comparison of grafting parameters such as grafting efficiency, percentage grafting and percentage conversion were carried out among various series of graft copolymers and then correlating it with elemental analysis, DSC, viscosity results. The acute oral toxicity study of grated gum was evaluated as per OECD guideline. Tablets were prepared by incorporating antidiabetic drug metformin hydrochloride (MTF) in grafted gum along with excipients. In vitro studies were performed on prepared tablet formulations showing release up to 8 h.

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application.

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.

Development and evaluation of xanthan gum-facilitated ethyl cellulose microsponges for controlled percutaneous delivery of diclofenac sodium.

In this study, xanthan gum-facilitated ethyl cellulose microsponges were prepared by the double emulsification technique and subsequently dispersed in a carbopol gel base for controlled delivery of diclofenac sodium to the skin. Scanning electron microscopy revealed the porous, spherical nature of the microsponges. Increase in the drug/polymer ratio (0.4:1, 0.6:1, 0.8:1, m/m) increased their yield (79.1-88.5%), drug entrapment efficiency (50.0-64.1%), and mean particle diameter (181-255 µm). Compared to the microsponges with high drug/polymer ratio (0.8:1, m/m), the flux of entrapped drug through excised rat skin decreased by 19.9% and 17.0%, respectively, for the microsponges prepared at low and intermediate drug/polymer ratios. When an equivalent amount of pure drug (not entrapped into microsponges) was dispersed into the gel base and the flux was compared, the microsponges (drug/polymer ratio 0.8:1, m/m) were found to reduce the flux by 33.3%. Whether the drug was dispersed either in un-entrapped or entrapped form into the gel base, the drug permeation through rat skin followed Higuchi's diffusion kinetic model. The microsponges prepared at the lowest drug/polymer ratio exhibited a comparatively slower drug permeation profile and were hence considered most suitable for controlled drug delivery application. FTIR spectroscopy and DSC analyses indicated the chemically stable, amorphous nature of the drug in these microsponges. The gel containing these optimized microsponges was comparable to that of a commercial gel formulation and did not show serious dermal reactions. Hence, the microsponge system obtained at the lowest drug/polymer ratio could be useful for controlled release of diclofenac sodium to the skin.

Tailoring of locust bean gum and development of hydrogel beads for controlled oral delivery of glipizide.

In this study, carboxymethyl derivative of locust bean gum was prepared, characterized, and its gelling ability with different concentrations (1-5% w/v) of aluminum chloride (AlCl(3)) was utilized for the development of glipizide-loaded beads in a completely aqueous environment. The beads were spherical when observed under a scanning electron microscope. Increase in gelling ion concentration decreased the drug entrapment efficiency from 97.68% to 95.14%. The beads swelled more slowly in pH 1.2 KCl-HCl buffer and exhibited a slower drug release pattern than that observed in pH 7.4 phosphate buffer. Irrespective of the dissolution media, the drug release became slower at higher AlCl(3) concentration. The drug release in alkaline medium was found to be controlled by a combination of diffusion as well as polymer relaxation phenomena. Comparing the release profiles, it was observed that the beads treated with 5% AlCl(3) provided slower drug release up to 10 h in alkaline medium without any sign of disintegration and, thus, this formulation was selected for further studies. Fourier transform infrared (FTIR) spectroscopy indicated the stable nature of the drug in the beads. Differential scanning calorimetry and X-ray diffraction analysis showed that most of the drug remained in amorphous state in the beads. Stability study indicated no statistical significant difference in drug entrapment efficiency of the beads. In vivo activity of the beads was tested and a prolonged hypoglycemic effect was achieved. Hence, carboxymethyl locust bean beads could be a potential carrier for controlled oral delivery of glipizide.

Microsponges: A novel strategy for drug delivery system.

Microsponges are polymeric delivery systems composed of porous microspheres. They are tiny sponge-like spherical particles with a large porous surface. Moreover, they may enhance stability, reduce side effects and modify drug release favorably. Microsponge technology has many favorable characteristics, which make it a versatile drug delivery vehicle. Microsponge Systems are based on microscopic, polymer-based microspheres that can suspend or entrap a wide variety of substances, and can then be incorporated into a formulated product such as a gel, cream, liquid or powder. The outer surface is typically porous, allowing a sustained flow of substances out of the sphere. Microsponges are porous, polymeric microspheres that are used mostly for topical use and have recently been used for oral administration. Microsponges are designed to deliver a pharmaceutical active ingredient efficiently at the minimum dose and also to enhance stability, reduce side effects, and modify drug release.

Investigation on processing variables for the preparation of fluconazole-loaded ethyl cellulose microspheres by modified multiple emulsion technique.

Fluconazole-loaded ethyl cellulose microspheres were prepared by alginate facilitated (water-in-oil)-in-water emulsion technology and the effects of various processing variables on the properties of microspheres were investigated. Scanning electron microscopy revealed spherical nature and smooth surface morphology of the microspheres except those prepared at higher concentration of emulsifiers and higher stirring speeds. The size of microspheres varied between 228 and 592 mum, and as high as 80% drug entrapment efficiency was obtained depending upon the processing variables. When compared up to 2 h, the drug release in pH 1.2 HCl solution was slower than in pH 7.4 phosphate buffer saline solution. However, this trend was reversed at high shear conditions. The microspheres provided extended drug release in alkaline dissolution medium and the drug release was found to be controlled by Fickian-diffusion mechanism. However, the mechanism shifted to anomalous diffusion at high shear rates and emulsifier concentrations. The aging of microspheres did not influence the drug release kinetics. However, the physical interaction between drug and excipients affected the drug dissolution behaviors. X-ray diffractometry (X-RD) and differential scanning calorimetry (DSC) analysis revealed amorphous nature of drug in the microspheres. Fourier transform infrared (FTIR) spectroscopy indicated stable character of fluconazole in the microspheres. The stability testing data also supported the stable nature of fluconazole in the microspheres. The fluconazole extracted from 80% drug-loaded formulation showed good in vitro antifungal activity against Candida albicans. Thus, proper control of the processing variables involved in this modified multiple emulsion technology could allow effective incorporation of slightly water soluble drugs into ethyl cellulose microspheres without affecting drug stability.