Choice of osteoblast model critical for studying the effects of electromagnetic stimulation on osteogenesis in vitro.

The clinical benefits of electromagnetic field (EMF) therapy in enhancing osteogenesis have been acknowledged for decades, but agreement regarding the underlying mechanisms continues to be sought. Studies have shown EMFs to promote osteoblast-like cell proliferation, or contrarily, to induce differentiation and enhance mineralization. Typically these disparities have been attributed to methodological differences. The present paper argues the possibility that the chosen osteoblast model impacts stimulation outcome. Phenotypically immature cells, particularly at low seeding densities, appear to be prone to EMF-amplified proliferation. Conversely, mature cells at higher densities seem to be predisposed to earlier onset differentiation and mineralization. This suggests that EMFs augment ongoing processes in cell populations. To test this hypothesis, mature SaOS-2 cells and immature MC3T3-E1 cells at various densities, with or without osteo-induction, were exposed to sinusoidal 50 Hz EMF. The exposure stimulated the proliferation of MC3T3-E1 and inhibited the proliferation of SaOS-2 cells. Baseline alkaline phosphatase (ALP) expression of SaOS-2 cells was high and rapidly further increased with EMF exposure, whereas ALP effects in MC3T3-E1 cells were not seen until the second week. Thus both cell types responded differently to EMF stimulation, corroborating the hypothesis that the phenotypic maturity and culture stage of cells influence stimulation outcome.

Electrochemical detection of hydrogen peroxide on platinum-containing tetrahedral amorphous carbon sensors and evaluation of their biofouling properties.

Hydrogen peroxide is the product of various enzymatic reactions, and is thus typically utilized as the analyte in biosensors. However, its detection with conventional materials, such as noble metals or glassy carbon, is often hindered by slow kinetics and biofouling of the electrode. In this study electrochemical properties and suitability to peroxide detection as well as ability to resist biofouling of Pt-doped ta-C samples were evaluated. Pure ta-C and pure Pt were used as references. According to the results presented here it is proposed that combining ta-C with Pt results in good electrocatalytic activity towards H2O2 oxidation with better tolerance towards aqueous environment mimicking physiological conditions compared to pure Pt. In biofouling experiments, however, both the hybrid material and Pt were almost completely blocked after immersion in protein-containing solutions and did not produce any peaks for ferrocenemethanol oxidation or reduction. On the contrary, it was still possible to obtain clear peaks for H2O2 oxidation with them after similar treatment. Moreover, quartz crystal microbalance experiment showed less protein adsorption on the hybrid sample compared to Pt which is also supported by the electrochemical biofouling experiments for H2O2 detection.

Glutamate detection by amino functionalized tetrahedral amorphous carbon surfaces.

In this paper, a novel amperometric glutamate biosensor with glutamate oxidase (GlOx) immobilized directly on NH2 functionalized, platinum doped tetrahedral amorphous carbon (ta-C) film, has been successfully developed. First, we demonstrate that direct GlOx immobilization is more effective on amino-groups than on carboxyl- or hydroxyl-groups. Second, we show that anodizing and plasma treatments increase the amount of nitrogen and the proportion of protonated amino groups relative to amino groups on the aminosilane coating, which subsequently results in an increased amount of active GlOx on the surface. This effect, however, is found to be unstable due to unstable electrostatic interactions between GlOx and NH3(+). We demonstrate the detection of glutamate in the concentration range of 10µM-1mM using the NH2 functionalized Pt doped ta-C surface. The biosensor showed high sensitivity (2.9nA µM(-1)cm(-2)), low detection limit (10µM) and good storage stability. The electrode response to glutamate was linear in the concentrations ranging from 10µM to 500µM. In conclusion, the study shows that GlOx immobilization is most effective on aminosilane treated ta-C surface without any pre-treatments and the fabricated sensor structure is able to detect glutamate in the micromolar range.

The effect of pulsed electromagnetic fields and dehydroepiandrosterone on viability and osteo-induction of human mesenchymal stem cells.

The hypothesis of this work was that human bone marrow-derived mesenchymal stem cells (MSCs) are regulated by pulsed electromagnetic fields (PEMFs) and by intracrine conversion of an adrenal prohormone to dihydrotestosterone. The effect of PEMF and dehydroepiandrosterone (DHEA) on viability and osteogenic differentiation of human MSCs and on the viability of osteoblastic SaOS-2 cells was evaluated. It was found that PEMF promoted the viability rate of both cell types, whereas DHEA decreased the viability rate in a concentration-dependent manner. PEMF did not have major effects on osteo-induction at this low seeding density level (3000 cells/cm(2) ). Instead, DHEA, after MSC-mediated and 5α-reductase-dependent conversion to dihydrotestosterone, clearly promoted the osteo-induction of MSCs induced with ß-glyserophosphate, ascorbate and dexamethasone. Alkaline phosphatase (ALP), SMAD1, RUNX2, osteopontin (OP) and osteocalcin (OC) RNA levels were increased and alizarin red S- and hydroxyapatite-specific OsteoImage(TM) stainings disclosed a promoted mineralization process. In addition, DHEA increased OP and OC mRNA levels of non-induced MSCs. A sequential use of mitogenic PEMF early during the fracture healing, followed by later administration of DHEA with osteogenic differentiating effect, might be worth subjecting to a randomized clinical trial.

Sample processing, protocol, and statistical analysis of the time-of-flight secondary ion mass spectrometry (ToF-SIMS) of protein, cell, and tissue samples.

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is increasingly being used in analysis of biological samples. For example, it has been applied to distinguish healthy and osteoarthritic human cartilage. This chapter discusses ToF-SIMS principle and instrumentation including the three modes of analysis in ToF-SIMS. ToF-SIMS sets certain requirements for the samples to be analyzed; for example, the samples have to be vacuum compatible. Accordingly, sample processing steps for different biological samples, i.e., proteins, cells, frozen and paraffin-embedded tissues and extracellular matrix for the ToF-SIMS are presented. Multivariate analysis of the ToF-SIMS data and the necessary data preprocessing steps (peak selection, data normalization, mean-centering, and scaling and transformation) are discussed in this chapter.

Osteogenic differentiation on DLC-PDMS-h surface.

The hypothesis was that anti-fouling diamond-like carbon polydimethylsiloxane hybrid (DLC-PDMS-h) surface impairs early and late cellular adhesion and matrix-cell interactions. The effect of hybrid surface on cellular adhesion and cytoskeletal organization, important for osteogenesis of human mesenchymal stromal cells (hMSC), where therefore compared with plain DLC and titanium (Ti). hMSCs were induced to osteogenesis and followed over time using scanning electron microscopy (SEM), time-of-flight secondary ion mass spectrometry (ToF-SIMS), immunofluorescence staining, quantitative real-time polymerase chain reaction (qRT-PCR), and hydroxyapatite (HA) staining. SEM at 7.5 hours showed that initial adherence and spreading of hMSC was poor on DLC-PDMS-h. At 5 days some hMSC were undergoing condensation and apoptotic fragmentation, whereas cells on DLC and Ti grew well. DAPI-actin-vinculin triple staining disclosed dwarfed cells with poorly organized actin cytoskeleton-focal complex/adhesion-growth substrate attachments on hybrid coating, whereas spread cells, organized microfilament bundles, and focal adhesions were seen on DLC and in particular on Ti. Accordingly, at day one ToF-SIMS mass peaks showed poor protein adhesion to DLC-PDMS-h compared with DLC and Ti. COL1A1, ALP, OP mRNA levels at days 0, 7, 14, 21, and/or 28 and lack of HA deposition at day 28 demonstrated delayed or failed osteogenesis on DLC-PDMS-h. Anti-fouling DLC-PDMS-h is a poor cell adhesion substrate during the early protein adsorption-dependent phase and extracellular matrix-dependent late phase. Accordingly, some hMSCs underwent anoikis-type apoptosis and failed to complete osteogenesis, due to few focal adhesions and poor cell-to-ECM contacts. DLC-PDMS-h seems to be a suitable coating for non-integrating implants/devices designed for temporary use.

Diamond-like carbon (DLC) thin film bioelectrodes: effect of thermal post-treatments and the use of Ti adhesion layer.

The effect of thermal post-treatments and the use of Ti adhesion layer on the performance of thin film diamond like carbon bioelectrodes (DLC) have been investigated in this work. The following results were obtained: (i) The microstructure of the DLC layer after the deposition was amorphous and thermal annealing had no marked effect on the structure, (ii) formation of oxygen containing SiOx and Ti[O,C] layers were detected at the Si/Ti and Ti/DLC interfaces with the help of transmission electron microscope (TEM), (iii) thermal post-treatments increased the polar fraction of the surface energy, (iv) cyclic voltammetry (CV) measurements showed that the DLC films had wide water windows and were stable in contact with dilute sulphuric acid and phosphate buffered saline (PBS) solutions, (v) use of Ti interlayer between Pt(Ir) microwire and DLC layer was crucial for the electrodes to survive the electrochemical measurements without the loss of adhesion of the DLC layer, (vi) DLC electrodes with small exposed Pt areas were an order of magnitude more sensitive towards dopamine than Pt electrodes and (vii) thermal post-treatments did not markedly change the electrochemical behavior of the electrodes despite the significant increase in the polar nature of the surfaces. It can be concluded that thin DLC bioelectrodes are stable under physiological conditions and can detect dopamine in micro molar range, but their sensitivity must be further improved.

IL-17C and its receptor IL-17RA/IL-17RE identify human oral epithelial cell as an inflammatory cell in recurrent aphthous ulcer.

BACKGROUND: Recurrent aphthous ulcer (RAU) is an ulcerative disease of non-keratinized oral mucosa. Colon and bronchial epithelial cells produce interleukin-17C (IL-17C) upon stimulation of Toll-like receptor 2 (TLR2), TLR3 and TLR5, which are highly expressed in epithelial cells in RAU lesions. We therefore investigated the eventual presence and function of IL-17C in cultured human oral keratinocytes (HOK) and control biopsies compared to RAU lesions. METHODS: Expression of IL-17A, IL-17C, IL-17RA and IL-17RE was analysed in cultured HOK cells using quantitative real-time polymerase chain reaction (qRT-PCR). HOK cells were stimulated with IL-17C and analysed for IL-8 and tumour necrosis factor-α (TNF-α) using qRT-PCR. Control mucosa (n = 5) was immunostained for IL-17A, IL-17C, IL-8, TNF-α and mast cell tryptase and compared with RAU lesions (n = 5) using the mean grey scale value. RESULTS: IL-17C, but no IL-17A, mRNA was found in cultured HOK cells. Components of the heterodimeric IL-17RA/IL-17RE receptor for IL-17C were also highly expressed. Stimulation of HOK with IL-17C increased TNF-α mRNA (P = 0.03; IL-8 increase was not statistically significant). HOK in RAU lesions stained intensively for IL-17C compared to controls (P = 0.006). This was associated with increased epithelial immunostaining of TNF-α (P = 0.04) and IL-8 (P = 0.02). Most of the inflammatory cells which stained for IL-17A in control mucosa and RAU lesions were also mast cell tryptase positive. CONCLUSION: IL-17C is highly expressed in epithelial cells in RAU lesions, where it seems to stimulate oral keratinocytes via IL-17RA/IL-17RE to produce pro-inflammatory cytokines. Human oral epithelial cells are probably important inflammatory cells in RAU.

Improving the function of dopamine electrodes with novel carbon materials.

For therapeutic purposes, an accurate measurement of dopamine level in situ would be highly desirable. A novel strategy for the selective determination of dopamine concentration based on the diamond-like carbon (DLC) electrode is presented in this abstract. The developed DLC electrode is able to detect 10 µM dopamine and has improved sensitivity compared to platinum. Compared to carbon fiber electrodes, the DLC electrode is more stable because the background current is much lower.

Circadian timekeeping is disturbed in rheumatoid arthritis at molecular level.

INTRODUCTION: Patients with rheumatoid arthritis (RA) have disturbances in the hypothalamic-pituitary-adrenal (HPA) axis. These are reflected in altered circadian rhythm of circulating serum cortisol, melatonin and IL-6 levels and in chronic fatigue. We hypothesized that the molecular machinery responsible for the circadian timekeeping is perturbed in RA. The aim of this study was to investigate the expression of circadian clock in RA. METHODS: Gene expression of thirteen clock genes was analyzed in the synovial membrane of RA and control osteoarthritis (OA) patients. BMAL1 protein was detected using immunohistochemistry. Cell autonomous clock oscillation was started in RA and OA synovial fibroblasts using serum shock. The effect of pro-inflammatory stimulus on clock gene expression in synovial fibroblasts was studied using IL-6 and TNF-α. RESULTS: Gene expression analysis disclosed disconcerted circadian timekeeping and immunohistochemistry revealed strong cytoplasmic localization of BMAL1 in RA patients. Perturbed circadian timekeeping is at least in part inflammation independent and cell autonomous, because RA synovial fibroblasts display altered circadian expression of several clock components, and perturbed circadian production of IL-6 and IL-1ß after clock resetting. However, inflammatory stimulus disturbs the rhythm in cultured fibroblasts. Throughout the experiments ARNTL2 and NPAS2 appeared to be the most affected clock genes in human immune-inflammatory conditions. CONCLUSION: We conclude that the molecular machinery controlling the circadian rhythm is disturbed in RA patients.

Formation and retention of staphylococcal biofilms on DLC and its hybrids compared to metals used as biomaterials.

Staphylococcus epidermidis and Staphylococcus aureus cause most of the implant-related infections. Antibiotic treatment often fails and cure requires surgical intervention. It was hypothesized that biomaterial coatings resistant to biofilms offer a preventive option. Physical vapour deposited diamond-like carbon (DLC) and its polytetrafluoroethylene (DLC-PTFE-h) and polydimethylsiloxane (DLC-PDMS-h) hybrids were compared to titanium (Ti), tantalum (Ta) and chromium (Cr) thin films on silicon wafers for their resistance against formation and/or retention of biofilms produced by S. epidermidis and S. aureus in vitro. Sample surfaces were characterized for surface topography, contact angle and zeta-potential, because such properties might affect the biofilm. Biofilm was stained using calcofluor white and analysed in fluorescence microscopy using morphometry. Sixteen hour incubation was selected in pilot tests; at this checkpoint Ti, Ta, Cr and DLC-PDMS-h were almost fully covered by biofilm, but DLC and DLC-PTFE-h were only partially biofilm coated by S. epidermidis (88±26%, p<0.001 and 56±39%, p<0.001, respectively) or S. aureus (81±24%, p<0.001 and 51±26%, p<0.001, respectively). DLC and its PTFE hybrid offer a potential biofilm hostile surface coating for implants and medical devices. This ability to resist biofilm formation and attachment could not be explained by only one factor, but it seems to be related to a combination of various properties, with electrokinetic streaming potential and protein coating being particularly important for its outcome.

Cell adhesion and osteogenic differentiation on three-dimensional pillar surfaces.

We hypothesized that when compared with conventional two-dimensional (2D) cultures, substrates containing 3D micropillars would allow cells to grow at levels, activating their cytoskeleton to promote osteogenesis. Fibroblasts, osteoblast-like cells, and mesenchymal stem cells (MSCs) were studied. Planar substrates were compared with 200-nm-, 5-µm-, and 20-µm-high pillars of Ormocomp®, Si, diamond-like carbon, or TiO(2). Scanning electron microscopy and staining of actin cytoskeleton showed 7.5-h adhesion to pillar edges and 5-day stretching between adhesion contacts > 100-µm distances of fibroblast and MSC in 3D networks, whereas SaOS-2 cells adhered flatly and individually on horizontal and vertical surfaces. ERK and ROCK immunostaining at 14 and 21 days confirmed activation of the cytoskeleton. In contrast to expectations, success to induce osteogenesis was dominated by the cytocompatibility of the substrate over the 3D structure. This was shown using early alkaline phosphatase, intermediate osteopontin, and late mineralization markers, together with bone nodule formation, which were seen in planar substrates and low-profile TiO(2) pillars, but were poor in the 20-µm landscape. The lack of intercellular contacts seems to halt the osteogenesis-promoting effects of cytoskeletal organization and tension described earlier.

Osteogenesis of human mesenchymal stem cells on micro-patterned surfaces.

Osteogenic responses of human mesenchymal stromal cells (hMSCs) were compared on square-patterned, inverse square-patterned, and planar titanium, chromium, diamond-like carbon (DLC), and tantalum; hypothesis was that both the materials and patterns affect osteogenesis. Samples were produced using photolithography and physical vapor deposition. Early-marker alkaline phosphatase (ALP) and mid-markers, small body size and mothers against decapentaplegic-related protein-1 (SMAD1), runt-related transcription factor-2 (RUNX2), and osteopontin were studied using quantitative real-time polymerase chain reaction. ALP and hydroxyapatite, were colorimetrically studied. ALP reached highest values on both patterned titanium samples, but mid-markers disclosed that it was already lagging behind planar and inverse patterned tantalum. Hydroxyapatite formation disclosed that osteo-induced hMSCs passed all the differentiation stages (except on planar chromium). Presence of hydroxyapatite disclosed that both types of patterning promoted (p < 0.001) osteogenesis compared to planar samples. Results suggest that the osseocompatibility/integration of implants could be improved by changing the monotonous and featureless implant-host interface into micro-patterned interface to provide physical differentiation cues.

Chemical and physical properties of regenerative medicine materials controlling stem cell fate.

Regenerative medicine is a multidisciplinary field utilizing the potential of stem cells and the regenerative capability of the body to restore, maintain, or enhance tissue and organ functions. Stem cells are unspecialized cells that can self-renew but also differentiate into several somatic cells when subjected the appropriate environmental cues. The ability to reliably direct stem cell fate would provide tremendous potential for basic research and clinical therapies. Proper tissue function and regeneration rely on the spatial and temporal control of biophysical and biochemical cues, including soluble molecules, cell-cell contacts, cell-extracellular matrix contacts, and physical forces. The mechanisms involved remain poorly understood. This review focuses on the stem cell-extracellular matrix interactions by summarizing the observations of the effects of material variables (such as overall architecture, surface topography, charge, ζ-potential, surface energy, and elastic modulus) on the stem cell fate. It also deals with the mechanisms underlying the effects of these extrinsic, material variables. Insight in the environmental interactions of the stem cells is crucial for the development of new material-based approaches for cell culture experiments and future experimental and clinical regenerative medicine applications.

Enhancement of silicon using micro-patterned surfaces of thin films.

Micro-textured biomaterials might enhance cytocompatibility of silicon-based micro-electro-mechanical system (bio-MEMS) dummies. Photolithography-physical vapour deposition was used to produce diamond-like carbon (DLC) or Ti squares and circles on silicon, and also their inverse replicas; then DLC and Ti were compared for their guiding potential, using a SaOS-2 cell model. Scanning electron microscopy at 48 hours indicated cells were well-spread on large-sized patterns (several cells on one pattern) and assumed the geometrical architecture of underlying features. Medium-sized patterns (slightly smaller than solitary indicator cells) were inhabited by singular cells, which stretched from one island to another, assuming longitudinal or branching morphologies. On small-sized patterns (much smaller than individual cells;rpar; cells covered large micro-textured areas, but cellular filopodia bypassed the bare silicon. Immunofluorescence and confocal laser scanning microscopy indicated that the actin cytoskeleton and vinculin-containing adhesion junctions were present on the patterned areas, but not on the bare silicon. Cell density/coverage disclosed a 3.4-3.7-fold preference for the biomaterial patterns over silicon substrate (p 0.001). Differences in the cellular response between materials were lost at 120 hours when cells were confluent. The working hypothesis was proven; enhancement by micro-patterning depends on the pattern size, shape and material and can be used to improve biocompatibility during the initial integration phase of the device.

Adhesion, spreading and osteogenic differentiation of mesenchymal stem cells cultured on micropatterned amorphous diamond, titanium, tantalum and chromium coatings on silicon.

It was hypothesized that human mesenchymal stromal cell (hMSC) can be guided by patterned and plain amorphous diamond (AD), titanium (Ti), tantalum (Ta) and chromium (Cr) coatings, produced on silicon wafer using physical vapour deposition and photolithography. At 7.5 h hMSCs density was 3.0-3.5 x higher (P < 0.0003, except Ti) and cells were smaller (68 vs. 102 microm, P 0.000006-0.02) on patterns than on silicon background. HMSC-covered surface of the background silicon was lower on Ti than AD patterns (P = 0.015), but at 5 days this had reversed (P = 0.006). At 7.5 h focal vinculin adhesions and actin cytoskeleton were outgoing from pattern edges so cells assumed geometric square shapes. Patterns allowed induced osteogenesis, but less effectively than plain surfaces, except for AD, which could be used to avoid osseointegration. All these biomaterial patterns exert direct early, intermediate and late guidance on hMSCs and osteogenic differentiation, but indirect interactions exist with cells on silicon background.

Microbial antigens mediate HLA-B27 diseases via TLRs.

HLA-B27 positive individuals are predisposed to reactive arthritis developing 1-3 weeks after urogenital and gastrointestinal infections. Also ankylosing spondylitis (AS) associates strongly to HLA-B27, but no specific infection, Klebsiella pneumoniae excluded, has been linked to it. Before the discovery of its HLA-B27 association there were many reports suggesting a link between chronic prostatitis in men or pelvic inflammatory disease in women and AS. They have since been forgotten although HLA-B27 did not help to understand, why this disease has an axial and ascending nature. It is proposed that the urogenital organs form a source of damage (or danger)-associated molecular patterns (DAMPs), either exogenous pathogen-associated molecular patterns (PAMPs) from microbes or endogenous alarmins, such as uric acid, released from necrotic cells or urate deposits. DAMPs are slowly seeded from low-down upwards via the pelvic and spinal lymphatic pathways. They reach Toll-like receptors (TLRs) in their target mesenchymal stem cells, which are stimulated to ectopic enchondral bone formation leading to syndesmophytes and bamboo spine. At the same time inflammatory cytokines induce secondary osteoporosis of the spine. This new paradigm places microbes, HLA-B27 and TLRs in the pathogenic centre stage, but without pinpointing any (one) specific pathogen; instead, shared microbial patterns are indicated.