RESUMO
PURPOSE: We aimed to investigate whether a clinically feasible dual time-point (DTP) approach can accurately estimate the metabolic uptake rate constant (Ki) and to explore reliable acquisition times through simulations and clinical assessment considering patient comfort and quantification accuracy. METHODS: We simulated uptake kinetics in different tumors for four sets of DTP PET images within the routine clinical static acquisition at 60-min post-injection (p.i.). We determined Ki for a total of 81 lesions. Ki quantification from full dynamic PET data (Patlak-Ki) and Ki from DTP (DTP-Ki) were compared. In addition, we scaled a population-based input function (PBIFscl) with the image-derived blood pool activity sampled at different time points to assess the best scaling time-point for Ki quantifications in the simulation data. RESULTS: In the simulation study, Ki estimated using DTP via (30,60-min), (30,90-min), (60,90-min), and (60,120-min) samples showed strong correlations (r ≥ 0.944, P < 0.0001) with the true value of Ki. The DTP results with the PBIFscl at 60-min time-point in (30,60-min), (60,90-min), and (60,120-min) were linearly related to the true Ki with a slope of 1.037, 1.008, 1.013 and intercept of -6 × 10-4, 2 × 10-5, 5 × 10-5, respectively. In a clinical study, strong correlations (r ≥ 0.833, P < 0.0001) were observed between Patlak-Ki and DTP-Ki. The Patlak-derived mean values of Ki, tumor-to-background-ratio, signal-to-noise-ratio, and contrast-to-noise-ratio were linearly correlated with the DTP method. CONCLUSIONS: Besides calculating the retention index as a commonly used quantification parameter inDTP imaging,our DTP method can accurately estimate Ki.
Assuntos
Estudos de Viabilidade , Fluordesoxiglucose F18 , Tomografia por Emissão de Pósitrons , Humanos , Fluordesoxiglucose F18/metabolismo , Tomografia por Emissão de Pósitrons/métodos , Fatores de Tempo , Processamento de Imagem Assistida por Computador/métodos , Cinética , Neoplasias/diagnóstico por imagem , Neoplasias/metabolismo , Transporte Biológico , Masculino , Feminino , Pessoa de Meia-Idade , Idoso , Simulação por ComputadorRESUMO
Background: Positron emission tomography (PET) imaging encounters the obstacle of partial volume effects, arising from its limited intrinsic resolution, giving rise to (I) considerable bias, particularly for structures comparable in size to the point spread function (PSF) of the system; and (II) blurred image edges and blending of textures along the borders. We set out to build a deep learning-based framework for predicting partial volume corrected full-dose (FD + PVC) images from either standard or low-dose (LD) PET images without requiring any anatomical data in order to provide a joint solution for partial volume correction and de-noise LD PET images. Methods: We trained a modified encoder-decoder U-Net network with standard of care or LD PET images as the input and FD + PVC images by six different PVC methods as the target. These six PVC approaches include geometric transfer matrix (GTM), multi-target correction (MTC), region-based voxel-wise correction (RBV), iterative Yang (IY), reblurred Van-Cittert (RVC), and Richardson-Lucy (RL). The proposed models were evaluated using standard criteria, such as peak signal-to-noise ratio (PSNR), root mean squared error (RMSE), structural similarity index (SSIM), relative bias, and absolute relative bias. Results: Different levels of error were observed for these partial volume correction methods, which were relatively smaller for GTM with a SSIM of 0.63 for LD and 0.29 for FD, IY with an SSIM of 0.63 for LD and 0.67 for FD, RBV with an SSIM of 0.57 for LD and 0.65 for FD, and RVC with an SSIM of 0.89 for LD and 0.94 for FD PVC approaches. However, large quantitative errors were observed for multi-target MTC with an RMSE of 2.71 for LD and 2.45 for FD and RL with an RMSE of 5 for LD and 3.27 for FD PVC approaches. Conclusions: We found that the proposed framework could effectively perform joint de-noising and partial volume correction for PET images with LD and FD input PET data (LD vs. FD). When no magnetic resonance imaging (MRI) images are available, the developed deep learning models could be used for partial volume correction on LD or standard PET-computed tomography (PET-CT) scans as an image quality enhancement technique.
RESUMO
PURPOSE: This work set out to propose an attention-based deep neural network to predict partial volume corrected images from PET data not utilizing anatomical information. METHODS: An attention-based convolutional neural network (ATB-Net) is developed to predict PVE-corrected images in brain PET imaging by concentrating on anatomical areas of the brain. The performance of the deep neural network for performing PVC without using anatomical images was evaluated for two PVC methods, including iterative Yang (IY) and reblurred Van-Cittert (RVC) approaches. The RVC and IY PVC approaches were applied to PET images to generate the reference images. The training of the U-Net network for the partial volume correction was trained twice, once without using the attention module and once with the attention module concentrating on the anatomical brain regions. RESULTS: Regarding the peak signal-to-noise ratio (PSNR), structural similarity index (SSIM), and root mean square error (RMSE) metrics, the proposed ATB-Net outperformed the standard U-Net model (without attention compartment). For the RVC technique, the ATB-Net performed just marginally better than the U-Net; however, for the IY method, which is a region-wise method, the attention-based approach resulted in a substantial improvement. The mean absolute relative SUV difference and mean absolute relative bias improved by 38.02 % and 91.60 % for the RVC method and 77.47 % and 79.68 % for the IY method when using the ATB-Net model, respectively. CONCLUSIONS: Our results propose that without using anatomical data, the attention-based DL model could perform PVC on PET images, which could be employed for PVC in PET imaging.
Assuntos
Encéfalo , Fluordesoxiglucose F18 , Encéfalo/diagnóstico por imagem , Redes Neurais de Computação , Tomografia por Emissão de Pósitrons/métodos , Razão Sinal-Ruído , Processamento de Imagem Assistida por Computador/métodosRESUMO
BACKGROUND: Attenuation and scatter correction is crucial for quantitative positron emission tomography (PET) imaging. Direct attenuation correction (AC) in the image domain using deep learning approaches has been recently proposed for combined PET/MR and standalone PET modalities lacking transmission scanning devices or anatomical imaging. PURPOSE: In this study, different input settings were considered in the model training to investigate deep learning-based AC in the image space. METHODS: Three different deep learning methods were developed for direct AC in the image space: (i) use of non-attenuation-corrected PET images as input (NonAC-PET), (ii) use of attenuation-corrected PET images with a simple two-class AC map (composed of soft-tissue and background air) obtained from NonAC-PET images (PET segmentation-based AC [SegAC-PET]), and (iii) use of both NonAC-PET and SegAC-PET images in a Double-Channel fashion to predict ground truth attenuation corrected PET images with Computed Tomography images (CTAC-PET). Since a simple two-class AC map (generated from NonAC-PET images) can easily be generated, this work assessed the added value of incorporating SegAC-PET images into direct AC in the image space. A 4-fold cross-validation scheme was adopted to train and evaluate the different models based using 80 brain 18 F-Fluorodeoxyglucose PET/CT images. The voxel-wise and region-wise accuracy of the models were examined via measuring the standardized uptake value (SUV) quantification bias in different regions of the brain. RESULTS: The overall root mean square error (RMSE) for the Double-Channel setting was 0.157 ± 0.08 SUV in the whole brain region, while RMSEs of 0.214 ± 0.07 and 0.189 ± 0.14 SUV were observed in NonAC-PET and SegAC-PET models, respectively. A mean SUV bias of 0.01 ± 0.26% was achieved by the Double-Channel model regarding the activity concentration in cerebellum region, as opposed to 0.08 ± 0.28% and 0.05 ± 0.28% SUV biases for the network that uniquely used NonAC-PET or SegAC-PET as input, respectively. SegAC-PET images with an SUV bias of -1.15 ± 0.54%, served as a benchmark for clinically accepted errors. In general, the Double-Channel network, relying on both SegAC-PET and NonAC-PET images, outperformed the other AC models. CONCLUSION: Since the generation of two-class AC maps from non-AC PET images is straightforward, the current study investigated the potential added value of incorporating SegAC-PET images into a deep learning-based direct AC approach. Altogether, compared with models that use only NonAC-PET and SegAC-PET images, the Double-Channel deep learning network exhibited superior attenuation correction accuracy.
Assuntos
Aprendizado Profundo , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Fluordesoxiglucose F18 , Processamento de Imagem Assistida por Computador/métodos , Imageamento por Ressonância Magnética/métodos , Tomografia por Emissão de Pósitrons/métodos , Encéfalo/diagnóstico por imagemRESUMO
This study aimed to assist doctors in detecting early-stage lung cancer. To achieve this, a hierarchical system that can detect nodules in the lungs using computed tomography (CT) images was developed. In the initial phase, a preexisting model (YOLOv5s) was used to detect lung nodules. A 0.3 confidence threshold was established for identifying nodules in this phase to enhance the model's sensitivity. The primary objective of the hierarchical model was to locate and categorize all lung nodules while minimizing the false-negative rate. Following the analysis of the results from the first phase, a novel 3D convolutional neural network (CNN) classifier was developed to examine and categorize the potential nodules detected by the YOLOv5s model. The objective was to create a detection framework characterized by an extremely low false positive rate and high accuracy. The Lung Nodule Analysis 2016 (LUNA 16) dataset was used to evaluate the effectiveness of this framework. This dataset comprises 888 CT scans that include the positions of 1186 nodules and 400,000 non-nodular regions in the lungs. The YOLOv5s technique yielded numerous incorrect detections owing to its low confidence level. Nevertheless, the addition of a 3D classification system significantly enhanced the precision of nodule identification. By integrating the outcomes of the YOLOv5s approach using a 30% confidence limit and the 3D CNN classification model, the overall system achieved 98.4% nodule detection accuracy and an area under the curve of 98.9%. Despite producing some false negatives and false positives, the suggested method for identifying lung nodules from CT scans is promising as a valuable aid in decision-making for nodule detection.
Assuntos
Neoplasias Pulmonares , Nódulo Pulmonar Solitário , Humanos , Neoplasias Pulmonares/diagnóstico por imagem , Nódulo Pulmonar Solitário/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Pulmão/diagnóstico por imagem , Redes Neurais de Computação , Interpretação de Imagem Radiográfica Assistida por Computador/métodosRESUMO
BACKGROUND: To investigate the use of dynamic radiomics features derived from dual-time-point (DTP-feature) [18F]FDG PET metabolic uptake rate Ki parametric maps to develop a predictive model for response to chemotherapy in lymphoma patients. METHODS: We analyzed 126 lesions from 45 lymphoma patients (responding n = 75 and non-responding n = 51) treated with chemotherapy from two different centers. Static and DTP radiomics features were extracted from baseline static PET images and DTP Ki parametric maps. Spearman's rank correlations were calculated between static and DTP features to identify features with potential additional information. We first employed univariate analysis to determine correlations between individual features, and subsequently utilized multivariate analysis to derive predictive models utilizing DTP and static radiomics features before and after ComBat harmonization. For multivariate modeling, we utilized both the minimum redundancy maximum relevance feature selection technique and the XGBoost classifier. To evaluate our model, we partitioned the patient datasets into training/validation and testing sets using an 80/20% split. Different metrics for classification including area under the curve (AUC), sensitivity (SEN), specificity (SPE), and accuracy (ACC) were reported in test sets. RESULTS: Via Spearman's rank correlations, there was negligible to moderate correlation between 32 out of 65 DTP features and some static features (ρ < 0.7); all the other 33 features showed high correlations (ρ ≥ 0.7). In univariate modeling, no significant difference between AUC of DTP and static features was observed. GLRLM_RLNU from static features demonstrated a strong correlation (AUC = 0.75, p value = 0.0001, q value = 0.0007) with therapy response. The most predictive DTP features were GLCM_Energy, GLCM_Entropy, and Uniformity, each with AUC = 0.73, p value = 0.0001, and q value < 0.0005. In multivariate analysis, the mean ranges of AUCs increased following harmonization. Use of harmonization plus combining DTP and static features was shown to provide significantly improved predictions (AUC = 0.97 ± 0.02, accuracy = 0.89 ± 0.05, sensitivity = 0.92 ± 0.09, and specificity = 0.88 ± 0.05). All models depicted significant performance in terms of AUC, ACC, SEN, and SPE (p < 0.05, Mann-Whitney test). CONCLUSIONS: Our results demonstrate significant value in harmonization of radiomics features as well as combining DTP and static radiomics models for predicting response to chemotherapy in lymphoma patients.
RESUMO
PURPOSE: This work was set out to investigate the feasibility of dose reduction in SPECT myocardial perfusion imaging (MPI) without sacrificing diagnostic accuracy. A deep learning approach was proposed to synthesize full-dose images from the corresponding low-dose images at different dose reduction levels in the projection space. METHODS: Clinical SPECT-MPI images of 345 patients acquired on a dedicated cardiac SPECT camera in list-mode format were retrospectively employed to predict standard-dose from low-dose images at half-, quarter-, and one-eighth-dose levels. To simulate realistic low-dose projections, 50%, 25%, and 12.5% of the events were randomly selected from the list-mode data through applying binomial subsampling. A generative adversarial network was implemented to predict non-gated standard-dose SPECT images in the projection space at the different dose reduction levels. Well-established metrics, including peak signal-to-noise ratio (PSNR), root mean square error (RMSE), and structural similarity index metrics (SSIM) in addition to Pearson correlation coefficient analysis and clinical parameters derived from Cedars-Sinai software were used to quantitatively assess the predicted standard-dose images. For clinical evaluation, the quality of the predicted standard-dose images was evaluated by a nuclear medicine specialist using a seven-point (- 3 to + 3) grading scheme. RESULTS: The highest PSNR (42.49 ± 2.37) and SSIM (0.99 ± 0.01) and the lowest RMSE (1.99 ± 0.63) were achieved at a half-dose level. Pearson correlation coefficients were 0.997 ± 0.001, 0.994 ± 0.003, and 0.987 ± 0.004 for the predicted standard-dose images at half-, quarter-, and one-eighth-dose levels, respectively. Using the standard-dose images as reference, the Bland-Altman plots sketched for the Cedars-Sinai selected parameters exhibited remarkably less bias and variance in the predicted standard-dose images compared with the low-dose images at all reduced dose levels. Overall, considering the clinical assessment performed by a nuclear medicine specialist, 100%, 80%, and 11% of the predicted standard-dose images were clinically acceptable at half-, quarter-, and one-eighth-dose levels, respectively. CONCLUSION: The noise was effectively suppressed by the proposed network, and the predicted standard-dose images were comparable to reference standard-dose images at half- and quarter-dose levels. However, recovery of the underlying signals/information in low-dose images beyond a quarter of the standard dose would not be feasible (due to very poor signal-to-noise ratio) which will adversely affect the clinical interpretation of the resulting images.
Assuntos
Aprendizado Profundo , Humanos , Processamento de Imagem Assistida por Computador/métodos , Perfusão , Estudos Retrospectivos , Razão Sinal-Ruído , Tomografia Computadorizada de Emissão de Fóton ÚnicoRESUMO
PURPOSE: We aimed to investigate whether short dynamic PET imaging started at injection, complemented with routine clinical acquisition at 60-min post-injection (static), can achieve reliable kinetic analysis. METHODS: Dynamic and static 18F-2-fluoro-2-deoxy-D-glucose (FDG) PET data were generated using realistic simulations to assess uncertainties due to statistical noise as well as bias. Following image reconstructions, kinetic parameters obtained from a 2-tissue-compartmental model (2TCM) were estimated, making use of the static image, and the time duration of dynamic PET data were incrementally shortened. We also investigated, in the first 2-min, different frame sampling rates, towards optimized dynamic PET imaging. Kinetic parameters from shortened dynamic datasets were additionally estimated for 9 patients (15 scans) with liver metastases of colorectal cancer, and were compared with those derived from full dynamic imaging using correlation and Passing-Bablok regression analyses. RESULTS: The results showed that by reduction of dynamic scan times from 60-min to as short as 5-min, while using static data at 60-min post-injection, bias and variability stayed comparable in estimated kinetic parameters. Early frame samplings of 5, 24 and 30 s yielded highest biases compared to other schemes. An early frame sampling of 10 s generally kept both bias and variability to a minimum. In clinical studies, strong correlation (r ≥ 0.97, P < 0.0001) existed between all kinetic parameters in full vs. shortened scan protocols. CONCLUSIONS: Shortened 5-min dynamic scan, sampled as 12 × 10 + 6 × 30 s, followed by 3-min static image at 60-min post-injection, enables accurate and robust estimation of 2TCM parameters, while enabling generation of SUV estimates.
Assuntos
Fluordesoxiglucose F18 , Tomografia por Emissão de Pósitrons , Compostos Radiofarmacêuticos , Humanos , Processamento de Imagem Assistida por Computador , CinéticaRESUMO
OBJECTIVES: Detection of urinary stone composition before treatment can help in its management. The purpose of this work is to study the feasibility of classifying the kidney stone compositions in vivo by dual-energy kidney, ureter, and bladder (DEKUB) X-ray imaging. METHODS: Six urinary stone compositions with nine diameters were simulated in a water phantom, and two 70- and 120-kVp images were acquired by radiography tally of the Monte Carlo code. Six image features among 10 were selected for classification of the kidney stones. Four classification algorithms were applied to the dataset using MatLab software. Five-fold cross-validation was applied to the most accurate algorithm for 1000 times and the true and false detection rates were reported. RESULTS: The obtained accuracy of kidney stone classification was 96 ± 2% and this decreased with increasing noise level. The DEKUB was successful in distinguishing brushite, calcium oxalate monohydrate, cystine, and calcium phosphate stones from other types. CONCLUSIONS: Acceptable results achieved by the low-cost, low-dose DEKUB system in detection of kidney stone composition not only obviates a need for complicated imaging systems such as dual-energy computed tomography, but also provides an available and useful aid for physicians to choose between treatment approaches.
Assuntos
Rim/diagnóstico por imagem , Tomografia Computadorizada por Raios X/métodos , Ureter/diagnóstico por imagem , Bexiga Urinária/diagnóstico por imagem , Cálculos Urinários/diagnóstico por imagem , Estudos de Viabilidade , Humanos , Imagens de Fantasmas , Cálculos Urinários/classificaçãoRESUMO
BACKGROUND AND OBJECTIVE: Over the past years, Monte Carlo codes have widespread use in the radiation research field. Radiography tally of MCNPX Monte Carlo code can be a popular and applicable tool for simulation of radiography images. However, validation is the most important prerequisite before using its results. METHODS: Herein, validation of MCNPX radiography tally with experimental results based on the output image parameters has been investigated. Three cubic phantoms with different thicknesses and aluminum, water, and acrylic inserts were studied. The effects of uniformity correction, the detector efficiency of X-ray in different energies, as well as noise caused by a high statistical error in the simulation were also evaluated. RESULTS: Based on the proposed protocol to correct the error and uniformity of simulated images versus experimental ones, the maximum difference of less than 5% was achieved. CONCLUSIONS: Consequently, using the presented method with fewer steps than previous similar works, the MCNPX radiography tally of Monte Carlo code is a useful and validated tool for medical investigation of radiology images.
RESUMO
Attenuation correction is known as a necessary step in positron emission tomography (PET) system to have accurate and quantitative activity images. Emission-based method is known as a promising approach for attenuation map estimation on TOF-PET scanners. The proposed method in this study imposes additional histogram-based information as a mixture model prior on the emission-based approach using maximum a posteriori (MAP) framework to improve its performance and make such a nearly segmented attenuation map. To eliminate misclassification of histogram modeling, a Median root prior is incorporated on the proposed approach to reduce the noise between neighbor voxels and encourage spatial smoothness in the reconstructed attenuation map. The joint-MAP optimization is carried out as an iterative approach wherein an alteration of the activity and attenuation updates is followed by a mixture decomposition of the attenuation map histogram. Also, the proposed method can segment attenuation map during the reconstruction. The evaluation of the proposed method on the numerical, simulation and real contexts indicate that the presented method has the potential to be used as a stand-alone method or even combined with other methods for attenuation correction on PET/MR systems.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Modelos Teóricos , Tomografia por Emissão de Pósitrons , Algoritmos , Fluordesoxiglucose F18 , Imageamento por Ressonância Magnética , Imagem Multimodal , Imagens de Fantasmas , Fatores de TempoRESUMO
Carotid artery stenosis causes narrowing of carotid lumens and may lead to brain infarction. The purpose of this study was to develop a semi-automated method of segmenting vessel walls, surrounding tissues, and more importantly, the carotid artery lumen by contrast computed tomography angiography (CTA) images and to define the severity of stenosis and present a three-dimensional model of the carotid for visual inspection. In vivo contrast CTA images of 14 patients (7 normal subjects and 7 patients undergoing endarterectomy) were analyzed using a multi-step segmentation algorithm. This method uses graph cut followed by watershed and Hessian based shortest path method in order to extract lumen boundary correctly without being corrupted in the presence of surrounding tissues. Quantitative measurements of the proposed method were compared with those of manual delineation by independent board-certified radiologists. The results were quantitatively evaluated using spatial overlap surface distance indices. A slightly strong match was shown in terms of dice similarity coefficient (DSC) = 0.87±0.08; mean surface distance (Dmsd) = 0.32±0.32; root mean squared surface distance (Drmssd) = 0.49±0.54 and maximum surface distance (Dmax) = 2.14±2.08 between manual and automated segmentation of common, internal and external carotid arteries, carotid bifurcation and stenotic artery, respectively. Quantitative measurements showed that the proposed method has high potential to segment the carotid lumen and is robust to the changes of the lumen diameter and the shape of the stenosis area at the bifurcation site. The proposed method for CTA images provides a fast and reliable tool to quantify the severity of carotid artery stenosis.
RESUMO
Automatic diagnosis tool helps physicians to evaluate capsule endoscopic examinations faster and more accurate. The purpose of this study was to evaluate the validity and reliability of an automatic post-processing method for identifying and classifying wireless capsule endoscopic images, and investigate statistical measures to differentiate normal and abnormal images. The proposed technique consists of two main stages, namely, feature extraction and classification. Primarily, 32 features incorporating four statistical measures (contrast, correlation, homogeneity and energy) calculated from co-occurrence metrics were computed. Then, mutual information was used to select features with maximal dependence on the target class and with minimal redundancy between features. Finally, a trained classifier, adaptive neuro-fuzzy interface system was implemented to classify endoscopic images into tumor, healthy and unhealthy classes. Classification accuracy of 94.2% was obtained using the proposed pipeline. Such techniques are valuable for accurate detection characterization and interpretation of endoscopic images.
RESUMO
OBJECTIVE: The overall aim of this work is to optimize the reconstruction parameters for low-dose yttrium-90 (Y) PET/CT imaging, and to determine Y minimum detectable activity, in an endeavor to investigate the feasibility of performing low-dose Y imaging in-vivo to plan the therapeutic dose in radioembolization. MATERIALS AND METHODS: This study was carried out using a Siemens Biograph 6 True Point PET/CT scanner. A Jaszczak phantom containing five hot syringes was imaged serially over 15 days. For 128 reconstruction parameters/algorithms, detectability performance and quantitative accuracy were evaluated using the contrast-to-noise ratio and the recovery coefficient, respectively. RESULTS: For activity concentrations greater than 2.5 MBq/ml, the linearity of the scanner was confirmed while the corresponding relative error was below 10%. Reconstructions with smaller numbers of iterations and smoother filters led to higher detectability performance, irrespective of the activity concentration and lesion size. In this study, the minimum detectable activity was found to be 3.28±10% MBq/ml using the optimized reconstruction parameters. Although the recovered activities were generally underestimated, for lesions with activity concentration greater than 4 MBq/ml, the amount of underestimation is limited to -15% for optimized reconstructions. CONCLUSION: Y PET/CT imaging, even with a low activity concentration, is feasible for depicting the distribution of Y implanted microspheres using optimized reconstruction parameters. As such, in-vivo PET/CT imaging of low-dose Y in the pretherapeutic stage may be feasible and fruitful to optimally plan the therapeutic activity delivered to patients undergoing radioembolization.
Assuntos
Algoritmos , Imagens de Fantasmas , Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada/instrumentação , Doses de Radiação , Planejamento da Radioterapia Assistida por Computador , Radioisótopos de Ítrio , Estudos de Viabilidade , Processamento de Imagem Assistida por ComputadorRESUMO
PURPOSE: While traditional collimations are widely used in preclinical SPECT imaging, they usually suffer from possessing a low system sensitivity leading to noisy images. In this study, we are aiming at introducing a novel collimator, the slithole, offering a superior resolution-sensitivity tradeoff for small animal SPECT. METHODS: The collimator was designed for a molecular SPECT scanner, the HiReSPECT. The slithole is a knife-edge narrow long aperture extended across long-axis of the camera's head. To meet the data completeness requirement, the collimator-detector assembly spins at each regular SPECT angle. The collimator was modeled within GATE Monte Carlo simulator and the data acquisition was performed for NEMA Image Quality (IQ) phantom. In addition, a dedicated 3D iterative reconstruction algorithm based upon plane-integral projections was also developed. RESULTS: The mean sensitivity of the slithole is 285cps/MBq while the current parallel-hole collimator holds a sensitivity of 36cps/MBq at a 30mm distance. The slithole collimation gives rise to a tomographic resolution of 1.8mm compared to a spatial resolution ofâ¼1.7mm for the parallel-hole one (even after resolution modeling). A 1.75 reduction factor in the noise level was observed when the current parallel-hole collimator is replaced by the slithole. Furthermore, quantitative analysis proves that 3 full-iterations of our dedicated image reconstruction lead to optimal image quality. For the largest rod in the NEMA IQ phantom, a recovery coefficient ofâ¼0.83 was obtained. CONCLUSION: The slithole collimator outperforms the current parallel-hole collimation by exhibiting a better resolution-sensitivity compromise for preclinical SPECT studies.
Assuntos
Tomografia Computadorizada de Emissão de Fóton Único/instrumentação , Algoritmos , Animais , Processamento de Imagem Assistida por Computador , Método de Monte Carlo , Imagens de FantasmasRESUMO
Edge-illumination x-ray phase contrast imaging (EI XPCI) is a non-interferometric phase-sensitive method where two absorption masks are employed. These masks are fabricated through a photolithography process followed by electroplating which is challenging in terms of yield as well as time- and cost-effectiveness. We report on the first implementation of EI XPCI with Pt-based metallic glass masks fabricated by an imprinting method. The new tested alloy exhibits good characteristics including high workability beside high x-ray attenuation. The fabrication process is easy and cheap, and can produce large-size masks for high x-ray energies within minutes. Imaging experiments show a good quality phase image, which confirms the potential of these masks to make the EI XPCI technique widely available and affordable.
RESUMO
Scatter coincidences contain hidden information about the activity distribution on the positron emission tomography (PET) imaging system. However, in conventional reconstruction, the scattered data cause the blurring of images and thus are estimated and subtracted from detected coincidences. List mode format provides a new aspect to use time of flight (TOF) and energy information of each coincidence in the reconstruction process. In this study, a novel approach is proposed to reconstruct activity distribution using the scattered data in the PET system. For each single scattering coincidence, a scattering angle can be determined by the recorded energy of the detected photons, and then possible locations of scattering can be calculated based on the scattering angle. Geometry equations show that these sites lie on two arcs in 2D mode or the surface of a prolate spheroid in 3D mode, passing through the pair of detector elements. The proposed method uses a novel and flexible technique to estimate source origin locations from the possible scattering locations, using the TOF information. Evaluations were based on a Monte-Carlo simulation of uniform and non-uniform phantoms at different resolutions of time and detector energy. The results show that although the energy uncertainties deteriorate the image spatial resolution in the proposed method, the time resolution has more impact on image quality than the energy resolution. With progress of the TOF system, the reconstruction using the scattered data can be used in a complementary manner, or to improve image quality in the next generation of PET systems.
Assuntos
Processamento de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Fótons , Tomografia por Emissão de Pósitrons/métodos , Tomografia Computadorizada por Raios X/métodos , Algoritmos , Simulação por Computador , Humanos , Método de Monte Carlo , Espalhamento de RadiaçãoRESUMO
This pilot study investigates the construction of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for the prediction of the survival time of patients with glioblastoma multiforme (GBM). ANFIS is trained by the pharmacokinetic (PK) parameters estimated by the model selection (MS) technique in dynamic contrast enhanced-magnetic resonance imaging (DCE-MRI) data analysis, and patient age. DCE-MRI investigations of 33 treatment-naïve patients with GBM were studied. Using the modified Tofts model and MS technique, the following physiologically nested models were constructed: Model 1, no vascular leakage (normal tissue); Model 2, leakage without efflux; Model 3, leakage with bidirectional exchange (influx and efflux). For each patient, the PK parameters of the three models were estimated as follows: blood plasma volume (vp ) for Model 1; vp and volume transfer constant (Ktrans ) for Model 2; vp , Ktrans and rate constant (kep ) for Model 3. Using Cox regression analysis, the best combination of the estimated PK parameters, together with patient age, was identified for the design and training of ANFIS. A K-fold cross-validation (K = 33) technique was employed for training, testing and optimization of ANFIS. Given the survival time distribution, three classes of survival were determined and a confusion matrix for the correct classification fraction (CCF) of the trained ANFIS was estimated as an accuracy index of ANFIS's performance. Patient age, kep and ve (Ktrans /kep ) of Model 3, and Ktrans of Model 2, were found to be the most effective parameters for training ANFIS. The CCF of the trained ANFIS was 84.8%. High diagonal elements of the confusion matrix (81.8%, 90.1% and 81.8% for Class 1, Class 2 and Class 3, respectively), with low off-diagonal elements, strongly confirmed the robustness and high performance of the trained ANFIS for predicting the three survival classes. This study confirms that DCE-MRI PK analysis, combined with the MS technique and ANFIS, allows the construction of a DCE-MRI-based fuzzy integrated predictor for the prediction of the survival of patients with GBM.
Assuntos
Neoplasias Encefálicas/mortalidade , Meios de Contraste/química , Lógica Fuzzy , Glioblastoma/mortalidade , Imageamento por Ressonância Magnética/métodos , Modelos Neurológicos , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Meios de Contraste/farmacocinética , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Modelos de Riscos Proporcionais , Análise de Sobrevida , Fatores de Tempo , Adulto JovemRESUMO
Extravascular extracellular space (ve ) is a key parameter to characterize the tissue of cerebral tumors. This study introduces an artificial neural network (ANN) as a fast, direct, and accurate estimator of ve from a time trace of the longitudinal relaxation rate, ΔR1 (R1 = 1/T1 ), in DCE-MRI studies. Using the extended Tofts equation, a set of ΔR1 profiles was simulated in the presence of eight different signal to noise ratios. A set of gain- and noise-insensitive features was generated from the simulated ΔR1 profiles and used as the ANN training set. A K-fold cross-validation method was employed for training, testing, and optimization of the ANN. The performance of the optimal ANN (12:6:1, 12 features as input vector, six neurons in hidden layer, and one output) in estimating ve at a resolution of 10% (error of ±5%) was 82%. The ANN was applied on DCE-MRI data of 26 glioblastoma patients to estimate ve in tumor regions. Its results were compared with the maximum likelihood estimation (MLE) of ve . The two techniques showed a strong agreement (r = 0.82, p < 0.0001). Results implied that the perfected ANN was less sensitive to noise and outperformed the MLE method in estimation of ve .
Assuntos
Neoplasias Encefálicas/diagnóstico por imagem , Gadolínio DTPA/farmacocinética , Glioblastoma/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Modelos Biológicos , Neovascularização Patológica/diagnóstico por imagem , Neovascularização Patológica/metabolismo , Algoritmos , Neoplasias Encefálicas/metabolismo , Neoplasias Encefálicas/patologia , Simulação por Computador , Meios de Contraste/farmacocinética , Glioblastoma/metabolismo , Glioblastoma/patologia , Humanos , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Neovascularização Patológica/patologia , Redes Neurais de Computação , Reconhecimento Automatizado de Padrão/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
PURPOSE: Determination of intra-tumor high-uptake area using 2-deoxy-2-[18F]fluoro-D-glucose ([18F]FDG) positron emission tomography (PET) imaging is an important consideration for dose painting in radiation treatment applications. The aim of our study was to develop a framework towards automated segmentation and labeling of homogeneous vs. heterogeneous tumors in clinical lung [18F]FDG-PET with the capability of intra-tumor high-uptake region delineation. PROCEDURES: We utilized and extended a fuzzy random walk PET tumor segmentation algorithm to delineate intra-tumor high-uptake areas. Tumor textural feature (TF) analysis was used to find a relationship between tumor type and TF values. Segmentation accuracy was evaluated quantitatively utilizing 70 clinical [18F]FDG-PET lung images of patients with a total of 150 solid tumors. For volumetric analysis, the Dice similarity coefficient (DSC) and Hausdorff distance (HD) measures were extracted with respect to gold-standard manual segmentation. A multi-linear regression model was also proposed for automated tumor labeling based on TFs, including cross-validation analysis. RESULTS: Two-tailed t test analysis of TFs between homogeneous and heterogeneous tumors revealed significant statistical difference for size-zone variability (SZV), intensity variability (IV), zone percentage (ZP), proposed parameters II and III, entropy and tumor volume (p < 0.001), dissimilarity, high intensity emphasis (HIE), and SUVmin (p < 0.01). Lower statistical differences were observed for proposed parameter I (p = 0.02), and no significant differences were observed for SUVmax and SUVmean. Furthermore, the Spearman rank analysis between visual tumor labeling and TF analysis depicted a significant correlation for SZV, IV, entropy, parameters II and III, and tumor volume (0.68 ≤ ρ ≤ 0.84) and moderate correlation for ZP, HIE, homogeneity, dissimilarity, parameter I, and SUVmin (0.22 ≤ ρ ≤ 0.52), while no correlations were observed for SUVmax and SUVmean (ρ < 0.08). The multi-linear regression model for automated tumor labeling process resulted in R 2 and RMSE values of 0.93 and 0.14, respectively (p < 0.001), and generated tumor labeling sensitivity and specificity of 0.93 and 0.89. With respect to baseline random walk segmentation, the results showed significant (p < 0.001) mean DSC, HD, and SUVmean error improvements of 21.4 ± 11.5 %, 1.4 ± 0.8 mm, and 16.8 ± 8.1 % in homogeneous tumors and 7.4 ± 4.4 %, 1.5 ± 0.6 mm, and 7.9 ± 2.7 % in heterogeneous lesions. In addition, significant (p < 0.001) mean DSC, HD, and SUVmean error improvements were observed for tumor sub-volume delineations, namely 5 ± 2 %, 1.5 ± 0.6 mm, and 7 ± 3 % for the proposed Fuzzy RW method compared to RW segmentation. CONCLUSION: We proposed and demonstrated an automatic framework for significantly improved segmentation and labeling of homogeneous vs. heterogeneous tumors in lung [18F]FDG-PET images.