X-ray structure and mutagenesis analyses of Clostridioides difficile endolysin Ecd09610 glucosaminidase domain.

Clostridioides difficile endolysin (Ecd09610) consists of an unknown domain at its N terminus, followed by two catalytic domains, a glucosaminidase domain and endopeptidase domain. X-ray structure and mutagenesis analyses of the Ecd09610 catalytic domain with glucosaminidase activity (Ecd09610CD53) were performed. Ecd09610CD53 was found to possess an α-bundle-like structure with nine helices, which is well conserved among GH73 family enzymes. The mutagenesis analysis based on X-ray structures showed that Glu405 and Asn470 were essential for enzymatic activity. Ecd09610CD53 may adopt a neighboring-group mechanism for a catalytic reaction in which Glu405 acted as an acid/base catalyst and Asn470 helped to stabilize the oxazolinium ion intermediate. Structural comparisons with the newly identified Clostridium perfringens autolysin catalytic domain (AcpCD) in the P1 form and a zymography analysis demonstrated that AcpCD was 15-fold more active than Ecd09610CD53. The strength of the glucosaminidase activity of the GH73 family appears to be dependent on the depth of the substrate-binding groove.

Biochemical Characterizations of the Putative Amidase Endolysin Ecd18980 Catalytic Domain from Clostridioides difficile.

Clostridioides difficile is the major causative pathogen of pseudomembranous colitis, and novel antimicrobial agents are required for treatment. Phage-derived endolysins exhibiting species-specific lytic activity have potential as novel antimicrobial agents. We surveyed the genome of C. difficile strain 630 and identified a gene encoding an endolysin, Ecd18980, which has an amidase_3 domain at the N-terminus but unknown C-terminal domain. The genes encoding Ecd18980 and its catalytic domain (Ecd18980CD) were cloned and expressed in Escherichia coli as N-terminal histidine-tagged proteins. These purified proteins showed lytic activity against C. difficile. Ecd18980CD showed higher lytic activity than the wild-type enzyme and near-specific lytic activity against C. difficile. This species specificity is thought to depend on substrate cleavage activity rather than binding. We also characterized the biochemical properties of Ecd18980CD, including optimal pH, salt concentration, and thermal stability.

X-ray structures of Enterobacter cloacae allose-binding protein in complexes with monosaccharides demonstrate its unique recognition mechanism for high affinity to allose.

d-Allose is an aldohexose of the C3-epimer of d-glucose, existing in very small amounts in nature, called a rare sugar. The operon responsible for d-allose metabolism, the allose operon, was found in several bacteria, which consists of seven genes: alsR, alsB, alsA, alsC, alsE, alsK, and rpiB. To understand the biological implication of the allose operon utilizing a rare sugar of d-allose as a carbon source, it is important to clarify whether the allose operon functions specifically for d-allose or also functions for other ligands. It was proposed that the allose operon can function for d-ribose, which is essential as a component of nucleotides and abundant in nature. Allose-binding protein, AlsB, coded in the allose operon, is thought to capture a ligand outside the cell, and is expected to show high affinity for the specific ligand. X-ray structure determinations of Enterobacter cloacae AlsB (EtcAlsB) in ligand-free form, and in complexes with d-allose, d-ribose, and d-allulose, and measurements of the thermal parameters of the complex formation using an isothermal titration calorimeter were performed. The results demonstrated that EtcAlsB has a unique recognition mechanism for high affinity to d-allose by changing its conformation from an open to a closed form depending on d-allose-binding, and that the binding of d-ribose to EtcAlsB could not induce a completely closed form but an intermediate form, explaining the low affinity for d-ribose.

Structural and biochemical characterization of Clostridium perfringens pili protein B collagen-binding domains.

Sortase-mediated pili are flexible rod proteins composed of major and minor/tip pilins, playing important roles in the initial adhesion of bacterial cells to host tissues. The pilus shaft is formed by covalent polymerization of major pilins, and the minor/tip pilin is covalently attached to the tip of the shaft involved in adhesion to the host cell. The Gram-positive bacterium Clostridium perfringens has a major pilin, and a minor/tip pilin (CppB) with the collagen-binding motif. Here, we report X-ray structures of CppB collagen-binding domains, collagen-binding assays and mutagenesis analysis, demonstrating that CppB collagen-binding domains adopt an L-shaped structure in open form, and that a small ß-sheet unique to CppB provides a scaffold for a favourable binding site for collagen peptide.

Structural and biochemical characterizations of Thermus thermophilus HB8 transketolase producing a heptulose.

Transketolase is a key enzyme in the pentose phosphate pathway in all organisms, recognizing sugar phosphates as substrates. Transketolase with a cofactor of thiamine pyrophosphate catalyzes the transfer of a 2-carbon unit from D-xylulose-5-phosphate to D-ribose-5-phosphate (5-carbon aldose), giving D-sedoheptulose-7-phosphate (7-carbon ketose). Transketolases can also recognize non-phosphorylated monosaccharides as substrates, and catalyze the formation of non-phosphorylated 7-carbon ketose (heptulose), which has attracted pharmaceutical attention as an inhibitor of sugar metabolism. Here, we report the structural and biochemical characterizations of transketolase from Thermus thermophilus HB8 (TtTK), a well-characterized thermophilic Gram-negative bacterium. TtTK showed marked thermostability with maximum enzyme activity at 85 °C, and efficiently catalyzed the formation of heptuloses from lithium hydroxypyruvate and four aldopentoses: D-ribose, L-lyxose, L-arabinose, and D-xylose. The X-ray structure showed that TtTK tightly forms a homodimer with more interactions between subunits compared with transketolase from other organisms, contributing to its thermal stability. A modeling study based on X-ray structures suggested that D-ribose and L-lyxose could bind to the catalytic site of TtTK to form favorable hydrogen bonds with the enzyme, explaining the high conversion rates of 41% (D-ribose) and 43% (L-lyxose) to heptulose. These results demonstrate the potential of TtTK as an enzyme producing a rare sugar of heptulose. KEY POINTS: • Transketolase catalyzes the formation of a 7-carbon sugar phosphate • Structural and biochemical characterizations of thermophilic transketolase were done • The enzyme could produce non-phosphorylated 7-carbon ketoses from sugars.

Biochemical Characterizations of the Putative Endolysin Ecd09610 Catalytic Domain from Clostridioides difficile.

Clostridioides difficile is the major pathogen of pseudomembranous colitis, and novel antimicrobial agents are sought after for its treatment. Phage-derived endolysins with species-specific lytic activity have potential as novel antimicrobial agents. We surveyed the genome of C. difficile strain 630 and identified an endolysin gene, Ecd09610, which has an uncharacterized domain at the N-terminus and two catalytic domains that are homologous to glucosaminidase and endopeptidase at the C-terminus. Genes containing the two catalytic domains, the glucosaminidase domain and the endopeptidase domain, were cloned and expressed in Escherichia coli as N-terminal histidine-tagged proteins. The purified domain variants showed lytic activity almost specifically for C. difficile, which has a unique peptide bridge in its peptidoglycan. This species specificity is thought to depend on substrate cleavage activity rather than binding. The domain variants were thermostable, and, notably, the glucosaminidase domain remained active up to 100 °C. In addition, we determined the optimal pH and salt concentrations of these domain variants. Their properties are suitable for formulating a bacteriolytic enzyme as an antimicrobial agent. This lytic enzyme can serve as a scaffold for the construction of high lytic activity mutants with enhanced properties.

Crystal structure and conformational stability of a galectin-1 tandem-repeat mutant with a short linker.

Modification of the domain architecture of galectins has been attempted to analyze their biological functions and to develop medical applications. Several types of galectin-1 repeat mutants were previously reported but, however, it was not clear whether the native structure of the wild type was retained. In this study, we determined the crystal structure of a galectin-1 tandem-repeat mutant with a short linker peptide, and compared the unfolding profiles of the wild type and mutant by chemical denaturation. The structure of the mutant was consistent with that of the dimer of the wild type, and both carbohydrate-binding sites were retained. The unfolding curve of the wild type with lactose suggested that the dimer dissociation and the tertiary structure unfolding was concomitant at micromolar protein concentrations. The midpoint denaturant concentration of the wild type was dependent on the protein concentration and lower than that of the mutant. Linking the two subunits significantly stabilized the tertiary structure. The mutant exhibited higher T-cell growth-inhibition activity and comparable hemagglutinating activity. Structural stabilization may prevent the oxidation of the internal cysteine residue.

Structural and biochemical characterization of the Clostridium perfringens-specific Zn2+-dependent amidase endolysin, Psa, catalytic domain.

Phage-derived endolysins, enzymes that degrade peptidoglycans, have the potential to serve as alternative antimicrobial agents. Psa, which was identified as an endolysin encoded in the genome of Clostridium perfringens st13, was shown to specifically lyse C. perfringens. Psa has an N-terminal catalytic domain that is homologous to the Amidase_2 domain (PF01510), and a novel C-terminal cell wall-binding domain. Here, we determined the X-ray structure of the Psa catalytic domain (Psa-CD) at 1.65 Å resolution. Psa-CD has a typical Amidase_2 domain structure, consisting of a spherical structure with a central ß-sheet surrounded by two α-helix groups. Furthermore, there is a Zn2+ at the center of Psa-CD catalytic reaction site, as well as a unique T-shaped substrate-binding groove consisting of two grooves on the molecule surface. We performed modeling study of the enzyme/substrate complex along with a mutational analysis, and demonstrated that the structure of the substrate-binding groove is closely related to the amidase activity. Furthermore, we proposed a Zn2+-mediated catalytic reaction mechanism for the Amidase_2 family, in which tyrosine constitutes part of the catalytic reaction site.

Modulation of the carbohydrate-binding specificity of two Xenopus proto-type galectins by site-directed mutagenesis.

The galectin family is a representative soluble lectin group, which is responsible for the modulation of various cell functions. Although the carbohydrate-binding specificity of galectins has been well-studied, the relationship between protein structure and specificity remains to be elucidated. We previously reported the characteristics of a Xenopus laevis skin galectin, xgalectin-Va, which had diverged from galectin-1. The carbohydrate selectivity of xgalectin-Va was different from that of human galectin-1 and xgalectin-Ib (a Xenopus laevis galectin-1 homolog). In this study, we clarified the key residues for this selectivity by site-directed mutagenesis. Substitution of two amino acids of xgalectin-Va, Val56Gly/Lys76Arg, greatly enhanced the binding ability to N-acetyllactosamine and conferred significant T-cell growth inhibition activity, although the wild type had no activity. These two residues, Gly54 and Arg74 in galectin-1, would cooperatively contribute to the N-acetyllactosamine recognition. The loop region between the S4 and S5 ß-strands was involved in the binding to the TF-antigen disaccharide. The loop substitution successfully changed the carbohydrate selectivity of xgalectin-Va and xgalectin-Ib.

X-ray structures of Clostridium perfringens sortase C with C-terminal cell wall sorting motif of LPST demonstrate role of subsite for substrate-binding and structural variations of catalytic site.

Pili of Gram-positive bacteria are flexible rod proteins covalently attached to the bacterial cell wall, that play important roles in the initial adhesion of bacterial cells to host tissues and bacterial colonization. Pili are formed by the polymerization of major and minor pilins, catalyzed by class C sortase (SrtC), a family of cysteine transpeptidases. The Gram-positive bacterium Clostridium perfringens has a major pilin (CppA), a minor pilin (CppB), and SrtC (CpSrtC). CpSrtC recognizes the C-terminal cell wall sorting signal motifs with five amino acid residues, LPSTG of CppA and LPETG of CppB, for the polymerization of pili. Here, we report biochemical analysis to detect the formation of Clostridium perfringens pili in vivo, and the X-ray structure of a novel intermolecular substrate-enzyme complex of CpSrtC with a sequence of LPST at the C-terminal site. The results showed that CpSrtC has a subsite for substrate-binding to aid polymerization of pili, and that the catalytic site has structural variations, giving insights into the enzyme catalytic reaction mechanism and affinities for the C-terminal cell wall sorting signal motif sequences.

Crystal structure of a novel homodimeric l-ribulose 3-epimerase from Methylomonus sp.

d-Allulose has potential as a low-calorie sweetener which can suppress fat accumulation. Several enzymes capable of d-allulose production have been isolated, including d-tagatose 3-epimerases. Here, we report the isolation of a novel protein from Methylomonas sp. expected to be a putative enzyme based on sequence similarity to ketose 3-epimerase. The synthesized gene encoding the deduced ketose 3-epimerase was expressed as a recombinant enzyme in Escherichia coli, and it exhibited the highest enzymatic activity toward l-ribulose, followed by d-ribulose and d-allulose. The X-ray structure analysis of l-ribulose 3-epimerase from Methylomonas sp. (MetLRE) revealed a homodimeric enzyme, the first reported structure of dimeric l-ribulose 3-epimerase. The monomeric structure of MetLRE is similar to that of homotetrameric l-ribulose 3-epimerases, but the short C-terminal α-helix of MetLRE is unique and different from those of known l-ribulose 3 epimerases. The length of the C-terminal α-helix was thought to be involved in tetramerization and increasing stability; however, the addition of residues to MetLRE at the C terminus did not lead to tetramer formation. MetLRE is the first dimeric l-ribulose 3-epimerase identified to exhibit high relative activity toward d-allulose.

Structural and biochemical characterizations of the novel autolysin Acd24020 from Clostridioides difficile and its full-function catalytic domain as a lytic enzyme.

Autolysin is a lytic enzyme that hydrolyzes peptidoglycans of the bacterial cell wall, with a catalytic domain and cell wall-binding (CWB) domains, to be involved in different physiological functions that require bacterial cell wall remodeling. We identified a novel autolysin, Acd24020, from Clostridioides (Clostridium) difficile (C. difficile), with an endopeptidase catalytic domain belonging to the NlpC/P60 family and three bacterial Src-homology 3 domains as CWB domains. The catalytic domain of Acd24020 (Acd24020-CD) exhibited C. difficile-specific lytic activity equivalent to Acd24020, indicating that Acd24020-CD has full-function as a lytic enzyme by itself. To elucidate the specific peptidoglycan-recognition and catalytic reaction mechanisms of Acd24020-CD, biochemical characterization, X-ray structure determination, a modeling study of the enzyme/substrate complex, and mutagenesis analysis were performed. Acd24020-CD has an hourglass-shaped substrate-binding groove across the molecule, which is responsible for recognizing the direct 3-4 cross-linking structure unique to C. difficile peptidoglycan. Based on the X-ray structure and modeling study, we propose a dynamic Cys/His catalyzing mechanism, in which the catalytic Cys299 and His354 residues dynamically change their conformations to complement each step of the enzyme catalytic reaction.

Structures of human galectin-10/monosaccharide complexes demonstrate potential of monosaccharides as effectors in forming Charcot-Leyden crystals.

The galectins are a family of ß-galactoside-specific animal lectins, and have attracted much attention as novel regulators of the immune system. Galectin-10 is well-expressed in eosinophils, and spontaneously forms Charcot-Leyden crystals (CLCs), during prolonged eosinophilic inflammatory reactions, which are frequently observed in eosinophilic diseases. Although biochemical and structural characterizations of galectin-10 have been done, its biological role and molecular mechanism are still unclear, and few X-ray structures of galectin-10 in complex with monosaccharides/oligosaccharides have been reported. Here, X-ray structures of galectin-10 in complexes with seven monosaccharides are presented with biochemical analyses to detect interactions of galectin-10 with monosaccharides/oligosaccharides. Galectin-10 forms a homo-dimer in the face-to-face orientation, and the monosaccharides bind to the carbohydrate recognition site composed of amino acid residues from two galectin-10 molecules of dimers, suggesting that galectin-10 dimer likely captures the monosaccharides in solution and in vivo. d-Glucose, d-allose, d-arabinose, and D-N-acetylgalactosamine bind to the interfaces between galectin-10 dimers in crystals, and they affect the stability of molecular packing in crystals, leading to easy-dissolving of CLCs, and/or inhibiting the formation of CLCs. These monosaccharides may serve as effectors of G10 to form CLCs in vivo.

X-ray structure of the direct electron transfer-type FAD glucose dehydrogenase catalytic subunit complexed with a hitchhiker protein.

The bacterial flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase complex derived from Burkholderia cepacia (BcGDH) is a representative molecule of direct electron transfer-type FAD-dependent dehydrogenase complexes. In this study, the X-ray structure of BcGDHγα, the catalytic subunit (α-subunit) of BcGDH complexed with a hitchhiker protein (γ-subunit), was determined. The most prominent feature of this enzyme is the presence of the 3Fe-4S cluster, which is located at the surface of the catalytic subunit and functions in intramolecular and intermolecular electron transfer from FAD to the electron-transfer subunit. The structure of the complex revealed that these two molecules are connected through disulfide bonds and hydrophobic interactions, and that the formation of disulfide bonds is required to stabilize the catalytic subunit. The structure of the complex revealed the putative position of the electron-transfer subunit. A comparison of the structures of BcGDHγα and membrane-bound fumarate reductases suggested that the whole BcGDH complex, which also includes the membrane-bound ß-subunit containing three heme c moieties, may form a similar overall structure to fumarate reductases, thus accomplishing effective electron transfer.

Structures of major pilins in Clostridium perfringens demonstrate dynamic conformational change.

Pili in Gram-positive bacteria are flexible rod proteins associated with the bacterial cell surface, and they play important roles in the initial adhesion to host tissues and colonization. The pilus shaft is formed by the covalent polymerization of major pilins, catalyzed by sortases, a family of cysteine transpeptidases. Here, X-ray structures of the major pilins from Clostridium perfringens strains 13 and SM101 and of sortase from strain SM101 are presented with biochemical analysis to detect the formation of pili in vivo. The major pilin from strain 13 adopts an elongated structure to form noncovalently linked polymeric chains in the crystal, yielding a practical model of the pilus fiber structure. The major pilin from strain SM101 adopts a novel bent structure and associates to form a left-handed twist like an antiparallel double helix in the crystal, which is likely to promote bacterial cell-cell interactions. A modeling study showed that pilin with a bent structure interacts favorably with sortase. The major pilin from strain SM101 was considered to be in an equilibrium state between an elongated and a bent structure through dynamic conformational change, which may be involved in pili-mediated colonization and sortase-mediated polymerization of pili.

X-ray structure of Arthrobacter globiformis M30 ketose 3-epimerase for the production of D-allulose from D-fructose.

The X-ray structure of ketose 3-epimerase from Arthrobacter globiformis M30, which was previously reported to be a D-allulose 3-epimerase (AgD-AE), was determined at 1.96 Šresolution. The crystal belonged to the hexagonal space group P6522, with unit-cell parameters a = b = 103.98, c = 256.53 Å. The structure was solved by molecular replacement using the structure of Mesorhizobium loti L-ribulose 3-epimerase (MlL-RE), which has 41% sequence identity, as a search model. A hexagonal crystal contained two molecules in the asymmetric unit, and AgD-AE formed a homotetramer with twofold symmetry. The overall structure of AgD-AE was more similar to that of MlL-RE than to the known structures of D-psicose (alternative name D-allulose) 3-epimerases (D-PEs or D-AEs), although AgD-AE and MlL-RE have different substrate specificities. Both AgD-AE and MlL-RE have long helices in the C-terminal region that would contribute to the stability of the homotetramer. AgD-AE showed higher enzymatic activity for L-ribulose than D-allulose; however, AgD-AE is stable and is a unique useful enzyme for the production of D-allulose from D-fructose.

The first crystal structure of manganese superoxide dismutase from the genus Staphylococcus.

A recombinant Staphylococcus equorum manganese superoxide dismutase (MnSOD) with an Asp13Arg substitution displays activity over a wide range of pH, at high temperature and in the presence of chaotropic agents, and retains 50% of its activity after irradiation with UVC for up to 45 min. Interestingly, Bacillus subtilis MnSOD does not have the same stability, despite having a closely similar primary structure and thus presumably also tertiary structure. Here, the crystal structure of S. equorum MnSOD at 1.4 Šresolution is reported that may explain these differences. The crystal belonged to space group P3221, with unit-cell parameters a = 57.36, b = 57.36, c = 105.76 Å, and contained one molecule in the asymmetric unit. The symmetry operation indicates that the enzyme has a dimeric structure, as found in nature and in B. subtilis MnSOD. As expected, their overall structures are nearly identical. However, the loop connecting the helical and α/ß domains of S. equorum MnSOD is shorter than that in B. subtilis MnSOD, and adopts a conformation that allows more direct water-mediated hydrogen-bond interactions between the amino-acid side chains of the first and last α-helices in the latter domain. Furthermore, S. equorum MnSOD has a slightly larger buried area compared with the dimer surface area than that in B. subtilis MnSOD, while the residues that form the interaction in the dimer-interface region are highly conserved. Thus, the stability of S. equorum MnSOD may not originate from the dimeric form alone. Furthermore, an additional water molecule was found in the active site. This allows an alternative geometry for the coordination of the Mn atom in the active site of the apo form. This is the first structure of MnSOD from the genus Staphylococcus and may provide a template for the structural study of other MnSODs from this genus.

X-ray structure of Clostridium perfringens sortase B cysteine transpeptidase.

The pathogenesis and infectivity of Gram-positive bacteria are mediated by many surface proteins that are covalently attached to peptidoglycans of the cell wall. The covalent attachment of these proteins is catalyzed by sortases (Srts), a family of cysteine transpeptidases, which are classified into six classes, A - F, based on their amino acid sequences and biological roles. Clostridium perfringens, one of the pathogenic clostridial species, has a class B sortase (CpSrtB) with 249 amino acid residues. X-ray structures of CpSrtB and its inactive mutant form were determined at 2.2 Å and 1.8 Å resolutions, respectively. CpSrtB adopts a typical sortase-protein fold, and has a unique substrate-binding groove formed by three ß-strands and two helices creating the sidewalls of the groove. The position of the catalytic Cys232 of CpSrtB is significantly different from those commonly found in Srts structures. The modeling study of the CpSrtB/peptide complex suggested that the position of Cys232 found in CpSrtB is preferable for the catalytic reaction to occur. Structural comparison with other class B sortases demonstrated that the catalytic site likely converts between two forms. The movement of Cys232 between the two forms may help His136 deprotonate Cys232 to be activated as a thiolate, which may the catalytic Cys-activated mechanism for Srts.

X-ray structure of a protease-resistant mutant form of human galectin-9 having two carbohydrate recognition domains with a metal-binding site.

Galectin-9 (G9) is a tandem-repeat type ß-galactoside-specific animal lectin having N-terminal and C-terminal carbohydrate recognition domains (N-CRD and C-CRD, respectively) joined by a linker peptide that is involved in the immune system. G9 is divalent in glycan binding, and structural information about the spatial arrangement of the two CRDs is very important for elucidating its biological functions. As G9 is protease sensitive due to the long linker, the protease-resistant mutant form of G9 (G9Null) was developed by modification of the linker peptide, while retaining its biological functions. The X-ray structure of a mutant form of G9Null with the replacement of Arg221 by Ser (G9Null_R221S) having two CRDs was determined. The structure of G9Null_R221S was compact to associate the two CRDs in the back-to-back orientation with a large interface area, including hydrogen bonds and hydrophobic interactions. A metal ion was newly found in the galectin structure, possibly contributing to the stable structure of protein. The presented X-ray structure was thought to be one of the stable structures of G9, which likely occurs in solution. This was supported by structural comparisons with other tandem-repeated galectins and the analyses of protein thermostability by CD spectra measurements.

X-ray structures of fructosyl peptide oxidases revealing residues responsible for gating oxygen access in the oxidative half reaction.

Current enzymatic systems for quantifying glycated hemoglobin are based on the FAD-containing enzyme fructosyl peptide oxidase (FPOX). FPOX has substrate specificity for fructosyl-α N-valyl-histidine derived from proteolytic digestion of the N-terminus of the HbA1c ß-chain. This study reports the X-ray structures of the wild-type and Asn56Ala (N56A) mutant of Phaeosphaeria nodorum fructosyl peptide oxidase (PnFPOX) to elucidate the residues responsible for the oxidative half-reaction. N56A showed decreased oxidase activity compared to the wild -type, while its dye-mediated dehydrogenase activity was higher than that of wild type. In wild-type PnFPOX, Asn56 forms a hydrogen bond with Lys274, thereby preventing it from forming a salt bridge with Asp54. By contrast, Lys274 of PnFPOX N56A moves toward Asp54, and they approach each other to form a salt bridge at a distance of 2.92-3.35 Å. Site-directed mutagenesis studies and protein channel analysis suggest that Asp54 assists in accepting oxygen properly at the position of the bound water molecule in the main oxygen channel. These results reveal that Asn56 in PnFPOX is essential for maintaining an effective oxygen accession path, and support the role of Asp54 as a gate keeper that cooperates with Lys274 to enable oxygen to reach the active site properly.