RESUMO
This study investigated a new dismantling system for concrete structures using a steam pressure cracking agent. We improved the mechanical systems such that it can drill through reinforcing steel bars. Therefore, the control method of the system and shape of the drill tip were improved. When the drill tip is stuck with chips and stopped, it is automatically pulled out and reinserted to recover the rotation. By changing the tip angle of the drill bit from 75° to 90°, it became possible to cut reinforcing bars, which were difficult to cut previously. In addition, we designed a crawler-type mechanical system and improved it such that it can be moved to the appropriate position and operated at any angle. This study revealed that the energy required for the drilling process accounts for more than 90% of the total dismantling energy. Through experiments using an impact hammer drill and observations of fracture surfaces using a three-dimensional scanner, we analysed the characteristics of reinforced concrete. In addition, the feasibility of the design for dismantling reinforced concrete was confirmed based on the determined energy associated with crack propagation.
RESUMO
This study demonstrates that a single-crystal diamond substrate can be cut along designed lines using the diamond-saw-wire cutting method. We developed an original saw-wire fixed diamond-grain using a bronze solder with a high melting temperature. We created a unique product machine system with a high vacuum furnace and a bronze solder that contains a metallic compound. The diamond cutting mechanism employed in this study is based on the mild wear phenomenon, owing to the friction between the diamond surfaces. A linear relationship between the cutting length and wire feed distance was observed. The relationship can be approximated as y = 0.3622x, where y (µm) is the cutting depth and x (km) is the wire feed distance. The life of the saw-wire was longer than that of the 6000 km wire feed distance and was tested by reciprocating an 8-m short wire at a speed, tension, and cutting force of 150 m/min, 1 N, and 0.2 N, respectively. A single crystal diamond substrate could be cut along the designed line, which was more than 2 mm long. The cutting speed was maintained constant at 0.36 µm/km.
RESUMO
OBJECTIVE: A newly designed combination chemotherapy for multiple myeloma, MMCP [ranimustine (MCNU), melphalan (MPH), cyclophosphamide (CPM) and prednisolone (PSL)], was analyzed and compared with the results of our previous randomized trial of VMCP [vincristine, MPH, CPM and PSL] and MMPP [MCNU, MPH, procarbazine and PSL]. METHODS: MCNU (33.3 mg/m2, div) on day 1 and MPH (4 mg/m2, po), CPM (66.7 mg/m2, po) and PSL (30 mg/m2, po) from day 1 to 4, were administered. Each cycle was repeated every 3 weeks. PATIENTS OR MATERIALS: From January 1991 until August 1995, 104 patients with multiple myeloma diagnosed at 10 hospitals of Nagoya Cooperative Study Group were enrolled. RESULTS: Of the 87 evaluable patients, partial response rate for MMCP was 65.5% and was significantly higher than that of VMCP (13/47=27.7%, p<0.0001) and that of MMPP (21/47=44.7%, p=0.0196). A plateau attainment was observed in 49.4%. The percentage of the patients who attained plateau was significantly increased in the MMCP arm than in the VMCP arm (19.1 %, p=0.0017) but was not in comparison with that of MMPP arm (42.6%, p=0.6790). Patients treated with MMCP survived significantly longer than those treated with VMCP or MMPP (p=0.0009 by generalized Wilcoxon test, p=0.0023 by log-rank test) with median survival for MMCP being 31.6 months, for VMCP 22.5 months, and for MMPP 22.9 months. No significant differences were observed with respect to adverse effects among the three regimens. CONCLUSION: The newly designed MMCP is a candidate as an induction chemotherapy for multiple myeloma.
