Contributions to cytochrome c inner- and outer-sphere reorganization energy.

Cytochromes c are small water-soluble proteins that catalyze electron transfer in metabolism and energy conversion processes. Hydrogenobacter thermophilus cytochrome c 552 presents a curious case in displaying fluxionality of its heme axial methionine ligand; this behavior is altered by single point mutation of the Q64 residue to N64 or V64, which fixes the ligand in a single configuration. The reorganization energy (λ) of these cytochrome c 552 variants is experimentally determined using a combination of rotating disc electrochemistry, chronoamperometry and cyclic voltammetry. The differences between the λ determined from these complementary techniques helps to deconvolute the contribution of the active site and its immediate environment to the overall λ (λ Total). The experimentally determined λ values in conjunction with DFT calculations indicate that the differences in λ among the protein variants are mainly due to the differences in contributions from the protein environment and not just inner-sphere λ. DFT calculations indicate that the position of residue 64, responsible for the orientation of the axial methionine, determines the geometric relaxation of the redox active molecular orbital (RAMO). The orientation of the RAMO with respect to the heme is key to determining electron transfer coupling (H AB) which results in higher ET rates in the wild-type protein relative to the Q64V mutant despite a 150 mV higher λ Total in the former.

Redox-Induced Structural Reorganization Dictates Kinetics of Cobalt(III) Hydride Formation via Proton-Coupled Electron Transfer.

Two-electron, one-proton reactions of a family of [CoCp(dxpe)(NCCH3)]2+ complexes (Cp = cyclopentadienyl, dxpe = 1,2-bis(di(aryl/alkyl)phosphino)ethane) form the corresponding hydride species [HCoCp(dxpe)]+ (dxpe = dppe (1,2-bis(diphenylphosphino)ethane), depe (1,2-bis(diethylphosphino)ethane), and dcpe (1,2-bis(dicyclohexylphosphino)ethane)) through a stepwise proton-coupled electron transfer process. For three [CoCp(dxpe)(NCCH3)]2+ complexes, peak shift analysis was employed to quantify apparent proton transfer rate constants from cyclic voltammograms recorded with acids ranging 22 pKa units. The apparent proton transfer rate constants correlate with the strength of the proton source for weak acids, but these apparent proton transfer rate constants curiously plateau (kpl) as the reaction becomes increasingly exergonic. The absolute apparent proton transfer rate constants across both these regions correlate with the steric bulk of the chelating diphosphine ligand, with bulkier ligands leading to slower kinetics (kplateau,depe = 3.5 × 107 M-1 s-1, kplateau,dppe = 1.7 × 107 M-1 s-1, kplateau,dcpe = 7.1 × 104 M-1 s-1). Mechanistic studies were conducted to identify the cause of the aberrant kPTapp-ΔpKa trends. When deuterated acids are employed, deuterium incorporation in the Cp ring is observed, indicating protonation of the CoCp(dxpe) species to form the corresponding hydride proceeds via initial ligand protonation. Digital simulations of cyclic voltammograms show ligand loss accompanying initial reduction gates subsequent PCET activity at higher driving forces. Together, these experiments reveal the details of the reaction mechanism: reduction of the Co(III) species is followed by dissociation of the bound acetonitrile ligand, subsequent reduction of the unligated Co(II) species to form a Co(I) species is followed by protonation, which occurs at the Cp ring, followed by tautomerization to generate the stable Co(III)-hydride product [HCoCp(dxpe)]+. Analysis as a function of chelating disphosphine ligand, solvent, and acid strength reveals that the ligand dissociation equilibrium is directly influenced by the steric bulk of the phosphine ligands and gates protonation, giving rise to the plateau of the apparent proton transfer rate constant with strong acids. The complexity of the reaction mechanism underpinning hydride formation, encompassing dynamic behavior of the entire ligand set, highlights the critical need to understand elementary reaction steps in proton-coupled electron transfer reactions.

Photochemical Hydrogen Evolution from Neutral Water with a Cobalt Metallopeptide Catalyst.

CoGGH, a Gly-Gly-His tripeptide coordinated to a cobalt ion, is shown to catalyze the reduction of aqueous protons to hydrogen (H2) in a light-driven reaction in water near neutral pH. Using [Ru(bpy)3]2+ as a photosensitizer and ascorbate as an electron donor, a turnover number up to 2200 with respect to CoGGH has been observed with the system remaining active for more than 48 h. The reaction conditions that favor H2 production are consistent with a reductive quenching mechanism. Results also suggest that CoGGH is robust under these reaction conditions and loss of activity over time results from [Ru(bpy)3]2+ degradation.

Cobalt Metallopeptide Electrocatalyst for the Selective Reduction of Nitrite to Ammonium.

A cobalt-tripeptide complex (CoGGH) is developed as an electrocatalyst for the selective six-electron, eight-proton reduction of nitrite to ammonium in aqueous buffer near neutral pH. The onset potential for nitrite reduction occurs at -0.65 V vs Ag/AgCl (1 M KCl). Controlled potential electrolysis at -0.90 V generates ammonium with a faradaic efficiency of 90 ± 3% and a turnover number of 3550 ± 420 over 5.5 h. CoGGH also catalyzes the reduction of the proposed intermediates nitric oxide and hydroxylamine to ammonium. These results reveal that a simple metallopeptide is an active functional mimic of the complex enzymes cytochrome c nitrite reductase and siroheme-containing nitrite reductase.

Hydrogen Evolution from Water under Aerobic Conditions Catalyzed by a Cobalt ATCUN Metallopeptide.

The cobalt complex of an amino-terminal copper and nickel (ATCUN) motif model tripeptide (CoGGH) is shown to act as an electrocatalyst for hydrogen evolution from water near neutral pH with high Faradaic efficiency. The catalyst performance is not significantly impacted by exposure to oxygen. CoGGH represents a new class of hydrogen evolution catalyst that is straightforward to prepare and to modify.

Semisynthetic and Biomolecular Hydrogen Evolution Catalysts.

There has been great interest in the development of stable, inexpensive, efficient catalysts capable of reducing aqueous protons to hydrogen (H2), an alternative to fossil fuels. While synthetic H2 evolution catalysts have been in development for decades, recently there has been great progress in engineering biomolecular catalysts and assemblies of synthetic catalysts and biomolecules. In this Forum Article, progress in engineering proteins to catalyze H2 evolution from water is discussed. The artificial enzymes described include assemblies of synthetic catalysts and photosynthetic proteins, proteins with cofactors replaced with synthetic catalysts, and derivatives of electron-transfer proteins. In addition, a new catalyst consisting of a thermophilic cobalt-substituted cytochrome c is reported. As an electrocatalyst, the cobalt cytochrome shows nearly quantitative Faradaic efficiency and excellent longevity with a turnover number of >270000.

Hydrogen evolution from neutral water under aerobic conditions catalyzed by cobalt microperoxidase-11.

A molecular electrocatalyst is reported that reduces protons to hydrogen (H2) in neutral water under aerobic conditions. The biomolecular catalyst is made from cobalt substitution of microperoxidase-11, a water-soluble heme-undecapeptide derived from the protein horse cytochrome c. In aqueous solution at pH 7.0, the catalyst operates with near quantitative Faradaic efficiency, a turnover frequency ~6.7 s(-1) measured over 10 min at an overpotential of 852 mV, and a turnover number of 2.5 × 10(4). Catalyst activity has low sensitivity to oxygen. The results show promise as a hydrogenase functional mimic derived from a biomolecule.

A loop in the N-lobe of human serum transferrin is critical for binding to the transferrin receptor as revealed by mutagenesis, isothermal titration calorimetry, and epitope mapping.

Transferrin (TF) is a bilobal transport protein that acquires ferric iron from the diet and holds it tightly within the cleft of each lobe (thereby preventing its hydrolysis). The iron is delivered to actively dividing cells by receptor mediated endocytosis in which diferric TF preferentially binds to TF receptors (TFRs) on the cell surface and the entire complex is taken into an acidic endosome. A combination of lower pH, a chelator, inorganic anions, and the TFR leads to the efficient release of iron from each lobe. Identification of residues/regions within both TF and TFR required for high affinity binding has been an ongoing goal in the field. In the current study, we created human TF (hTF) mutants to identify a region critical to the interaction with the TFR which also constitutes part of an overlapping epitope for two monoclonal antibodies (mAbs) to the N-lobe, one of which was previously shown to block binding of hTF to the TFR. Four single point mutants, P142A, R143A, K144A, and P145A in the N-lobe, were placed into diferric hTF. Isothermal titration calorimetry (ITC) revealed that three of the four residues (Pro142, Lys144, and Pro145) in this loop are essential to TFR binding. Additionally, Lys144 is common to the recognition of both mAbs which show different sensitivities to the three other residues. Taken together these studies prove that this loop is required for binding of the N-lobe of hTF to the TFR, provide a more precise description of the role of each residue in the loop in the interaction with the TFR, and confirm that the N-lobe is essential to high affinity binding of diferric hTF to TFR.