The VP53 protein encoded by RNA2 of a fabavirus, broad bean wilt virus 2, is essential for viral systemic infection.

Plant viruses evolves diverse strategies to overcome the limitations of their genomic capacity and express multiple proteins, despite the constraints imposed by the host translation system. Broad bean wilt virus 2 (BBWV2) is a widespread viral pathogen, causing severe damage to economically important crops. It is hypothesized that BBWV2 RNA2 possesses two alternative in-frame translation initiation codons, resulting in the production of two largely overlapping proteins, VP53 and VP37. In this study, we aim to investigate the expression and function of VP53, an N-terminally 128-amino-acid-extended form of the viral movement protein VP37, during BBWV2 infection. By engineering various recombinant and mutant constructs of BBWV2 RNA2, here we demonstrate that VP53 is indeed expressed during BBWV2 infection. We also provide evidence of the translation of the two overlapping proteins through ribosomal leaky scanning. Furthermore, our study highlights the indispensability of VP53 for successful systemic infection of BBWV2, as its removal results in the loss of virus infectivity. These insights into the translation mechanism and functional role of VP53 during BBWV2 infection significantly contribute to our understanding of the infection mechanisms employed by fabaviruses.

The potential bone regeneration effects of leptin- and osteolectin-coated 3D-printed PCL scaffolds: an in vivo study.

This study investigated the effectiveness of bone regeneration upon the application of leptin and osteolectin to a three-dimensional (3D) printed poly(ε-caprolactone) (PCL) scaffold. A fused deposition modeling 3D bioprinter was used to fabricate scaffolds with a diameter of 4.5 mm, a height of 0.5 mm, and a pore size of 420-520 nm using PCL (molecular weight: 43,000). After amination of the scaffold surface for leptin and osteolectin adhesion, the experimental groups were divided into the PCL scaffold (control), the aminated PCL (PCL/Amine) scaffold, the leptin-coated PCL (PCL/Leptin) scaffold, and the osteolectin-coated PCL (PCL/Osteo) scaffold. Next, the water-soluble tetrazolium salt-1 (WST-1) assay was used to assess cell viability. All groups exhibited cell viability rates of >100%. Female 7-week-old Sprague-Dawley rats were used for in vivo experiments. Calvarial defects were introduced on the rats' skulls using a 5.5 mm trephine bur. The rats were divided into the PCL (control), PCL/Leptin, and PCL/Osteo scaffold groups. The scaffolds were then inserted into the calvarial defect areas, and the rats were sacrificed after 8-weeks to analyze the defect area. Micro-CT analysis indicated that the leptin- and osteolectin-coated scaffolds exhibited significantly higher bone regeneration. Histological analysis revealed new bone and blood vessels in the calvarial defect area. These findings indicate that the 3D-printed PCL scaffold allows for patient-customized fabrication as well as the easy application of proteins like leptin and osteolectin. Moreover, leptin and osteolectin did not show cytotoxicity and exhibited higher bone regeneration potential than the existing scaffold.

A leptin-loaded poly-ϵ-caprolactone 3D printing scaffold for odontoblastic differentiation in human dental pulp cells.

This study investigated the effects on odontoblast differentiation of a 3D-printed poly-ϵ-caprolactone (PCL) scaffold that incorporated leptin. Material extrusion-type 3D printing with a 43 000-molecular weight PCL material was used to fabricate a PCL scaffold with a 6 mm diameter, 1 mm height, and 270-340 µm pore size. The experimental groups were PCL scaffolds (control group), PCL scaffolds with aminated surfaces (group A), and PCL scaffolds with leptin on the aminated surface (group L). The aminated surface was treated with 1,6-hexanediamine and verified by ninhydrin analysis. Leptin loading was performed using Traut's reagent and 4-(N-Maleimidomethyl)cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC). Groups A and L showed significantly higher surface wettability, pulp cell adhesion, and proliferation than the control group. Group L exhibited increased alkaline phosphatase, calcification deposits, and mRNA and protein expression of dentin sialophosphoprotein and dentin matrix acidic phosphoprotein 1 compared with the control group. In this study, a 3D-printed PCL scaffold containing leptin was enhanced odontoblast differentiation and dental pulp cells adhesion and proliferation.

Pressure Dependence of Solid Electrolyte Ionic Conductivity: A Particle Dynamics Study.

The search for safe, reliable, and compact high-capacity energy storage devices has led to increased interest in all-solid-state battery research. The use of solid electrolytes provides enhanced safety and durability due to their reduced flammability and increased mechanical strength compared to organic liquid electrolytes. Still, the use of solid electrolytes remains challenging. A significant issue is their generally low Li-ion conductivity, which depends on the lattice diffusion of Li ions through the solid phase, as well as on the limited contact area between the electrolyte particles. While the lattice diffusion can be addressed through the chemistry of the solid electrolyte material, the contact area is a mechanical and structural problem of packing and compression of the electrolyte particles depending on their size and shape. This work studies the effect of pressurization on the electrolyte conductivity exploring cases of low as well as high grain boundary (GB) conductivity, compared to the bulk conductivity. Scaling dependence, σ ∼ Pη, of the conductivity σ with pressure P is revealed. For an idealized electrolyte represented as spheres in hexagonal closely packed configuration, η = 2/3 and η = 1/3 have been theoretically calculated for the two cases of low and high GB conductivity, respectively. For randomly packed spheres, the equivalent exponent values were numerically estimated to be approximately 3/4 and 1/2, respectively, which are higher than the closed packed values due to the additional decrease of porosity with the increase in pressure. As demonstrated in the study, experimental measurement of η can indicate which type of bulk or GB conductivity is dominant in a particular electrolyte powder and could be used in addition to electrochemical impedance spectroscopy measurements.

The Impact of Particle Size and Surface Treatment of Zirconia Suspension for Photocuring Additive Manufacturing.

To prepare a photocurable ceramic suspension for use in commercialized additive manufacturing equipment, the effects of the rheological properties of zirconia particles added to a binder, and the presence or absence of a silane coupling agent on the particles was evaluated. To this end, three experimental groups (ZSs, ZMs, ZLs) and three control groups (ZS, ZM, ZL) were designed depending on the size of the underlying zirconia particles. The test-group zirconia suspensions were prepared through silanization, which was not applied to the control-group suspensions. Depending on the particle size, viscosity differences between the test and control groups were 16,842, 18,623, and 12,303 mPa·s, respectively. Compared to the other groups, the viscosity of the ZLs group suspension decreased by 70.98-88.04%. This confirmed that the viscosity of the suspensions was affected by the particle size and the presence of silane coating. The dispersion stability of the zirconia suspensions was evaluated over 20 days. A sedimentation test confirmed that the sedimentation rate of the ZLs group was slower than those of the other groups. This study aimed to optimize the suspension manufacturing method to effectively be utilized in further commercializing zirconia three-dimensional (3D) printing and could also help to develop various medical applications.

Effects of UV Absorber on Zirconia Fabricated with Digital Light Processing Additive Manufacturing.

This study evaluated the effect of UV absorbers on the dimensional accuracy of zirconia specimens fabricated by additive manufacturing using a digital light process. Zirconia suspension for additive manufacturing was prepared by setting the volume fractions (0, 0.005, 0.05, and 0.1%) of various UV absorbers. The effect of UV absorber content was evaluated through curing thickness, geometric overgrowth model design, linear deviation, and microstructure evaluation before and after sintering. Statistical analysis was performed by Kruskal-Wallis H and post-tested by the Bonferroni correction method. There was no significant difference in the cure depth according to the presence or absence of the UV absorber, the difference in geometric overgrowth was from 2.1 to 12.5%, and the overgrowth significantly decreased as the amount of added UV absorber increased. This result may contribute to improved precision of 3D multilayer ceramic products.

Tomato ARPC1 regulates trichome morphology and density and terpene biosynthesis.

MAIN CONCLUSION: Based on transcriptomic analysis of wild-type and mutant tomato plants, ARPC1 was found to be important for trichome formation and development and it plays a key role in terpene synthesis. Trichomes are protruding epidermal cells in plant species. They function as the first defense layer against biotic and abiotic stresses. Despite the essential role of tomato trichomes in defense against herbivores, the understanding of their development is still incomplete. Therefore, the aim of this study was to identify genes involved in trichome formation and morphology and terpene synthesis, using transcriptomic techniques. To achieve this, we examined leaf morphology and compared the expression levels of some putative genes involved in trichome formation between wild-type (WT) and hairless-3 (hl-3) tomato mutant. The hl-3 plants displayed swollen and distorted trichomes and reduced trichome density (type I and IV) and terpene synthesis compared with that of the WT plants. Gene expression analysis showed that Actin-Related Protein Component1 (ARPC1) was expressed more highly in the WT than in the hl-3 mutant, indicating its critical role in trichome morphology and density. Additionally, the expression of MYC1 and several terpene synthase genes (TPS9, 12, 20), which are involved in type VI trichome initiation and terpene synthesis, was lower in the hl-3 mutant than in the WT plants. Moreover, transformation of the hl-3 mutant with WT ARPC1 restored normal trichome structure and density, and terpene synthesis. Structural and amino acid sequence analysis showed that there was a missplicing mutation in the hl-3 mutant, which was responsible for the abnormal trichome structure and density, and impaired terpene synthesis. Overall, the findings of this study demonstrated that ARPC1 is involved in regulating trichome structure and terpene synthesis in tomato.

AvrRps4 effector family processing and recognition in lettuce.

During pathogenesis, effector proteins are secreted from the pathogen to the host plant to provide virulence activity for invasion of the host. However, once the host plant recognizes one of the delivered effectors, effector-triggered immunity activates a robust immune and hypersensitive response (HR). In planta, the effector AvrRps4 is processed into the N-terminus (AvrRps4N ) and the C-terminus (AvrRps4C ). AvrRps4C is sufficient to trigger HR in turnip and activate AtRRS1/AtRPS4-mediated immunity in Arabidopsis; on the other hand, AvrRps4N induces HR in lettuce. Furthermore, AvrRps4N -mediated HR requires a conserved arginine at position 112 (R112), which is also important for full-length AvrRps4 (AvrRps4F ) processing. Here, we show that effector processing and effector recognition in lettuce are uncoupled for the AvrRps4 family. In addition, we compared effector recognition by lettuce of AvrRps4 and its homologues, HopK1 and XopO. Interestingly, unlike for AvrRps4 and HopK1, mutation of the conserved R111 in XopO by itself was insufficient to abolish recognition. The combination of amino acid substitutions arginine 111 to leucine with glutamate 114 to lysine abolished the XopO-mediated HR, suggesting that AvrRps4 family members have distinct structural requirements for perception by lettuce. Together, our results provide an insight into the processing and recognition of AvrRps4 and its homologues.

Case Report: Aortic Regurgitation of Postocclusion and Long-Term Outcome Following PDA Correction in an Adult Dog.

A 9-year-old intact female Maltese dog was admitted for further evaluation of previously diagnosed patent ductus arteriosus (PDA). The dog showed severe coughing and exercise intolerance. On physical examination, a grade VI/VI continuous heart murmur was auscultated. Thoracic radiography demonstrated cardiomegaly, pulmonary overcirculation, and moderate bronchointerstitial pattern. Echocardiography revealed severe dilation of the left ventricle and atrium, decreased left ventricular contractility, and left-to-right PDA. On electrocardiography (ECG), R amplitude was increased. Computed tomographic angiography revealed type IIA PDA. The serum N-terminal pro-B-type natriuretic peptide (NT-proBNP) concentration was >10,000 pmol/L. Transarterial occlusion was performed and the Amplatz® Canine Duct Occluder was successfully deployed. On echocardiography 48 h after the procedure, aortic regurgitation (AR) and residual ductal flow were noted. Long-term follow-up on clinical signs, physical examination, radiography, echocardiography, ECG, and serum NT-proBNP were evaluated until 30 months after correction of PDA. The clinical indices of physical examination, thoracic radiography, echocardiography, ECG, and serum NT-proBNP concentration were improved, although the postocclusion AR and residual ductal flow persisted. The dog followed up without clinical signs for 41 months following the correction. To our knowledge, this is the first case report to demonstrate quite a long time of follow-up (41 months) in an older dog with transarterial occlusion of PDA with postocclusion AR and residual flow.

Effect of physical activity on the development and the resolution of nonalcoholic fatty liver in relation to body mass index.

BACKGROUND: Data on whether physical activity (PA) levels are related to nonalcoholic fatty liver disease (NAFLD) when considering body mass index (BMI) are scarce. We assessed whether PA affects the development or resolution of NAFLD in conjunction with BMI changes. METHODS: Overall, 130,144 participants who underwent health screening during 2011-2016 were enrolled. According to the PA level in the Korean version of the validated International PA Questionnaire Short Form, participants were classified into the inactive, active, and health-enhancing PA (HEPA) groups. RESULTS: In participants with increased BMI, the hazard ratio (HR) and 95% confidence interval after multivariable Cox hazard model for incident NAFLD was 0.97 (0.94-1.01) in the active group and 0.94 (0.89-0.99) in the HEPA group, whereas that for NAFLD resolution was 1.03 (0.92-1.16) and 1.04 (0.88-1.23) (reference: inactive group). With increased BMI, high PA affected only new incident NAFLD. PA enhancement or maintenance of sufficient PA prevented new incident NAFLD. In participants with decreased BMI, the HRs were 0.98 (0.90-1.07) and 0.88 (0.78-0.99) for incident NAFLD and 1.07 (0.98-1.17) and 1.33 (1.18-1.49) for NAFLD resolution in the active and HEPA groups, respectively. With decreased BMI, high PA reduced incident NAFLD and increased NAFLD resolution. Maintenance of sufficient PA led to a considerable resolution of NAFLD. CONCLUSION: In this large longitudinal study, PA prevented incident NAFLD regardless of BMI changes. For NAFLD resolution, sufficient PA was essential along with BMI decrease. Maintaining sufficient PA or increasing the PA level is crucial for NAFLD prevention or resolution.

Evaluation of Physical Properties of Zirconia Suspension with Added Silane Coupling Agent for Additive Manufacturing Processes.

In this study, we have analysed the effects of a silane coupling agent on the volume fraction of zirconia for digital light processing (DLP)-based additive manufacturing processes. Zirconia suspension was prepared by the incorporation of silane-modified zirconia particles (experimental group) or untreated zirconia particles (control group). Furthermore, the control and experimental group were subdivided into three groups based on the volume fraction (52, 54, and 56 vol%) of zirconia particles. The disk-shaped zirconia samples were 3D (three-dimensional) printed using the DLP technique and their physical and mechanical properties were evaluated. The addition of a silane coupling agent to the zirconia samples was found to have influence of about 6% on the hardness and biaxial flexural strength. Moreover, the decrease in minute air gaps inside the zirconia layers significantly increased the material density (visualized from the microstructure analysis). Thus, from this study, it was established that the silane-modified zirconia particles had a positive effect on the physical properties of the zirconia parts.

Association of inter-arm systolic blood pressure differences with arteriosclerosis and atherosclerosis: A cohort study of 117,407 people.

BACKGROUND AND AIMS: Inter-arm blood pressure differences (IADs) are known to be associated with adverse cardiovascular outcomes. We evaluated the distribution of IADs in a large cohort of apparently healthy people and the association of IADs with brachial-ankle pulse wave velocity (baPWV) and coronary artery calcium (CAC). METHODS: Blood pressure was measured in both arms of 117,407 people who participated in the Kangbuk Samsung Health Study. IAD was defined as the absolute difference in systolic blood pressure in both arms and was confirmed by measuring the baPWV using an automatic oscillometric device. Arterial stiffness was measured by the baPWV, and CAC was assessed using multi-detector computed tomography. RESULTS: The mean IAD in the overall subjects was 3.09 ± 2.83 mmHg, 6 mmHg in the 90th percentile, 8 mmHg in the 95th percentile, and 10 mmHg in the 97th percentile. In the multivariable-adjusted analysis of 92,949 subjects excluding those with a history of HTN, DM, and cardiovascular disease (CVD), increasing IAD did not statistically increase the risk of developing a CAC >0. However, IAD was associated with a baPWV >1400 cm/s (odds ratio [95% confidence interval], 1.23 [1.13-1.35] in the total cohort, 1.19 [1.08-1.31] in males, and 1.39 [1.11-1.73] in females). CONCLUSIONS: More than 97% of all participants had an IAD of 10 mmHg or less. IAD was significantly associated with arterial stiffness, reflecting arteriosclerosis, but not with the presence of CAC, reflecting atherosclerosis. IAD may be a valuable tool for the early detection of asymptomatic, low-risk individuals with subclinical arterial disease.

Relationship between alcohol consumption and insulin resistance measured using the homeostatic model assessment for insulin resistance: A retrospective cohort study of 280,194 people.

BACKGROUND AND AIM: Alcohol consumption causes metabolic disorders and is a known risk factor for cardiovascular disease. However, some studies suggested that low level alcohol consumption improves insulin resistance. We evaluated the effects of alcohol consumption on insulin resistance using the homeostatic model assessment for insulin resistance (HOMA-IR). METHODS AND RESULTS: This study included 280,194 people without diabetes who underwent comprehensive health examinations more than twice between 2011 and 2018. The levels of alcohol intake were obtained through a self-questionnaire. All subjects were divided into two groups based on the Korean standard cut-off value of HOMA-IR, 2.2. Cox proportional hazard analysis was used to assess the risk of insulin resistance according to alcohol consumption. The mean age of the study subjects was 38.2 years and 55.7% were men. During the follow-up period (median 4.13 years), HOMA-IR progressed from <2.2 to ≥2.2 in 64,443 subjects (23.0%) and improved from ≥2.2 to <2.2 in 21,673 subjects (7.7%). In the parametric survival analysis, alcohol consumption was associated with improvement of HOMA-IR (HR [95% CI], 1.09[1.03-1.14], 1.11[1.06-1.17] and 1.20[1.13-1.26], respectively). In the analysis classified according to changes in alcohol consumption amounts, increased alcohol consumption tended to prevent the progression of HOMA-IR (0.97[0.96-0.99]; p = 0.004). However, the association between the changes in alcohol consumption amounts and improvement of HOMA-IR was not statistically significant. CONCLUSION: This retrospective observational study has shown that alcohol consumption can improve insulin resistance and increased alcohol consumption amounts may have preventive effects on the progression of HOMA-IR compared to the baseline level.

Three-Dimensional Zirconia-Based Scaffolds for Load-Bearing Bone-Regeneration Applications: Prospects and Challenges.

The design of zirconia-based scaffolds using conventional techniques for bone-regeneration applications has been studied extensively. Similar to dental applications, the use of three-dimensional (3D) zirconia-based ceramics for bone tissue engineering (BTE) has recently attracted considerable attention because of their high mechanical strength and biocompatibility. However, techniques to fabricate zirconia-based scaffolds for bone regeneration are in a stage of infancy. Hence, the biological activities of zirconia-based ceramics for bone-regeneration applications have not been fully investigated, in contrast to the well-established calcium phosphate-based ceramics for bone-regeneration applications. This paper outlines recent research developments and challenges concerning numerous three-dimensional (3D) zirconia-based scaffolds and reviews the associated fundamental fabrication techniques, key 3D fabrication developments and practical encounters to identify the optimal 3D fabrication technique for obtaining 3D zirconia-based scaffolds suitable for real-world applications. This review mainly summarized the articles that focused on in vitro and in vivo studies along with the fundamental mechanical characterizations on the 3D zirconia-based scaffolds.

Optimized Zirconia 3D Printing Using Digital Light Processing with Continuous Film Supply and Recyclable Slurry System.

Stereolithography (SL) can fabricate complex ceramic parts layer by layer using computer-aided design (CAD) models. The traditional SL system utilizes a vat filled with ceramic slurry with a high solid content, which for ceramics contributes to several limitations and operational difficulties, and further renders it nonrecyclable mainly due to the presence of printed residue and its high viscosity. In this study, we utilized a continuous film supply (CFS) system integrated with a tape-casting type digital light processing (DLP) printer to fabricate zirconia prototypes with a solid content of 45 volume percent (vol.%). Various printing and postprocessing parameters were studied for optimization, to achieve a relative density of 99.02% ± 0.08% with a microhardness of 12.59 ± 0.47 GPa. Slurry reusability was also demonstrated by printing with recycled slurry to produce consistent relative density values in the range of 98.86% ± 0.02% to 98.94% ± 0.03%. This method provides new opportunities for material recycling and the fabrication of dense complex ceramic products, reducing the consumption of the material.

SlHair2 Regulates the Initiation and Elongation of Type I Trichomes on Tomato Leaves and Stems.

Trichomes are hair-like structures that are essential for abiotic and biotic stress responses. Tomato Hair (H), encoding a C2H2 zinc finger protein, was found to regulate the multicellular trichomes on stems. Here, we characterized Solyc10g078990 (hereafter Hair2, H2), its closest homolog, to examine whether it was involved in trichome development. The H2 gene was highly expressed in the leaves, and its protein contained a single C2H2 domain and was localized to the nucleus. The number and length of type I trichomes on the leaves and stems of knock-out h2 plants were reduced when compared to the wild-type, while overexpression increased their number and length. An auto-activation test with various truncated forms of H2 using yeast two-hybrid (Y2H) suggested that H2 acts as a transcriptional regulator or co-activator and that its N-terminal region is important for auto-activation. Y2H and pull-down analyses showed that H2 interacts with Woolly (Wo), which regulates the development of type I trichomes in tomato. Luciferase complementation imaging assays confirmed that they had direct interactions, implying that H2 and Wo function together to regulate the development of trichomes. These results suggest that H2 has a role in the initiation and elongation of type I trichomes in tomato.

Fatty Liver Is Associated with Low N-Terminal Pro-B-Type Natriuretic Peptide in a Healthy Population.

Fatty liver (FL), insulin resistance (IR) and obesity often coexist, but data on the independent impacts of these factors on N-terminal pro-B-type natriuretic peptide (NT-proBNP) levels are scarce. We examined the impact of FL, IR and obesity on NT-proBNP levels using a large set of cross-sectional data. The associations of FL, IR and obesity with NT-proBNP were analyzed in 39,923 healthy adult participants. IR was estimated using a homeostasis model assessment-estimated insulin resistance (HOMA-IR) index. A multivariable regression model was conducted to identify associations between NT-proBNP and FL on abdominal ultrasound. FL, IR and obesity showed independent inverse associations with NT-proBNP after multiple adjustments for baseline characteristics. In a multivariable regression model adjusting for IR and obesity, FL was independently associated with lower levels of NT-proBNP (estimates, Exp(ß) 0.864, 0.849-0.880). The combination of FL and IR was a powerful dual indicator, lowering NT-proBNP levels approximately 25% in the generally healthy study population. In conclusion, FL was independently associated with lower NT-proBNP levels. FL and a high HOMA-IR index are a powerful indicator combination for lower NT-proBNP levels. Further research is needed to elucidate the mechanism underlying the association between FL and NT-proBNP.

Effects of Age, Sex, and Obesity on N-Terminal Pro B-Type Natriuretic Peptide Concentrations in the General Population.

BACKGROUND: Data regarding complex relationships between age, sex, obesity and N-terminal pro B-type natriuretic peptide (NT-proBNP) remain scarce. Thus, we investigated sex-specific associations of obesity and NT-proBNP levels among adults in the general healthy population in Korea.Methods and Results:The associations of age, sex and obesity-associated parameters (waist circumference [WC], body mass index [BMI] and body weight) with NT-proBNP were analyzed in 39,937 healthy adult participants. Multivariable regression models adjusted for factors known to affect NT-proBNP were used to identify associations between NT-proBNP and obesity-related parameters. NT-proBNP levels were higher in females than males. Older age was also associated with higher NT-proBNP levels in the overall population (P<0.001). When accounting for age in multivariable linear regression models, there was a strong inverse association between WC, BMI, and NT-proBNP in females and a weaker inverse association in males, with a significant difference between the sexes (P interaction <0.001). After adjusting for the effects of WC and BMI on each other, abdominal obesity was associated with lower NT-proBNP levels in females but not males (P interaction <0.001). CONCLUSIONS: In this large sample of young and healthy Asians, younger age, male sex, and increases in obesity-related parameters were related to lower levels of NT-proBNP. Further comprehensive studies are needed to understand the factors affecting NT-proBNP levels in different populations.

Hybrid porous zirconia scaffolds fabricated using additive manufacturing for bone tissue engineering applications.

For the formation of new bone in critical-sized bone defects, bioactive scaffolds with an interconnected porous network are necessary. Herein, we fabricated three-dimensional (3D) porous hybrid zirconia scaffolds to promote hybrid functionality, i.e., excellent mechanical properties and bioactive performance. Specifically, the 3D printed scaffolds were subjected to Zn-HA/glass composite coating on glass-infiltrated zirconia (ZC). In addition, to pertain the extracellular matrix of bone, biopolymer (alginate/gelatine) was embedded in a developed 3D construct (ZB and ZCB). A zirconia-printed scaffold (Z) group served as a control. The structural and mechanical properties of the constructed scaffolds were studied using essential characterization techniques. Furthermore, the biological performance of the designed scaffolds was tested by a sequence of in vitro cell tests, including the attachment, proliferation, and osteogenic differentiation of dental pulp cells (DPCs). The ZC and ZCB scaffolds exhibited 20% higher compression strength than the zirconia (Z) scaffolds. More importantly, the ZC constructs exhibited superior cell-adhesion, distribution, and osteogenic differentiation ability due to the synergistic effects of the composite coating. In addition, the biopolymer-embedded scaffolds (ZB, ZCB) showed an excellent biological and mechanical performance. Thus, our results suggest that the Zn-HA/glass composite-coated glass-infiltrated zirconia (ZC, ZCB) scaffolds are a dynamic approach to designing bioactive 3D scaffolds for the load-bearing bone regeneration applications.