Piped-slow-release calcium nitrate dosing: A new approach to in-situ sediment odor control in rural areas.

Calcium nitrate addition is economically viable and highly efficient for the in-situ treatment of contaminated sediment and enhancement of surface water quality, particularly in rural areas. However, conventional nitrate addition technologies have disadvantages such as excessive nitrate release, sharp ammonium increase, and weakened sulfide oxidation efficiency owing to rapid nitrate injection into the sediment. To resolve these defects, we propose a piped-slow-release (PSR) calcium nitrate dosing method and investigate its treatment efficiency and underlying mechanisms. The results illustrated that PSR dosing had a longer half-life (t1/2 = 5.08 days) and a lower maximum apparent nitrate escape rate of 1.28 % than conventional nitrate injection and other dosing methods. In addition, the PSR managed the inorganic nitrogen release into the overlying water, and after the treatment, the nitrate, ammonium, and nitrite concentrations of 0 mg/L, 8.60 mg/L, and 0 mg/L on day 28 were close to those of the control group (0 mg/L, 8.76 mg/L, and 0 mg/L, respectively). Moreover, the PSR method maintained a moderate nitrate concentration of approximately 3000 mg/L in sediment interstitial water by its controlled-release design, thus greatly enhancing the sulfide oxidation efficiency by relieving the inhibitory effects of high nitrate concentrations, with 83.0 % sulfide being eradicated within 5 days. Sulfide-ferrous nitrate reduction (denitrification and dissimilatory nitrate reduction to ammonium) genera (e.g., Sulfurimonas, Thiobacillus, and Thioalkalispira) were successively enhanced and dominated the microbial community, and the related functional genes displayed high relative abundances. These results imply that the PSR dosing method for calcium nitrate, characterized by flexible operation, high efficiency, low cost, and controllable processes, is appropriate for remediating black-odorous sediment in rural areas.

The optimum particle size of anaerobic ammonia oxidation granular sludge under different substrate concentrations.

The nitrogen removal performance of anaerobic ammonia oxidation granular sludge (AnGS) varies widely among particle sizes. In this paper, the nitrogen removal performance, extracellular polymeric substances (EPS) secretion level and microbial community of AnGS with different particle sizes were investigated to select the optimal particle size for different substrate concentrations. The results showed that the optimal particle size migrated from 0.6-1.6 mm to 1.6-2.5 mm and then to 2.5-3.2 mm as the substrate concentration increased. When the influent concentration of NH4+-N was 110 mg/L, granular sludge with particle size of 1.6-2.5 mm showed excellent nitrogen removal performance with the highest EPS secretion, while the highest EPS secretion gradually migrated to smaller particles as the substrate concentration decreased. The nitrogen removal performance of AnGS with different particle sizes depends on different proportions of anaerobic ammonium-oxidizing (anammox) bacteria (Candidates_Jettenia, Candidates_Kuenenia, Candidatus_Brocadia), heterotrophic nitrification aerobic denitrifying bacteria (Acinetobacter) and denitrifying bacteria (Denitratisoma). The optimum particle size range for AnGS has been clarified for different influent nitrogen concentrations, which can provide some new understanding for the application of anammox reactors.