Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds.

This review highlights the synthesis, properties, and advanced applications of synthetic and natural polymers 3D printed using stereolithography for soft tissue engineering applications. Soft tissue scaffolds are of great interest due to the number of musculoskeletal, cardiovascular, and connective tissue injuries and replacements humans face each year. Accurately replacing or repairing these tissues is challenging due to the variation in size, shape, and strength of different types of soft tissue. With advancing processing techniques such as stereolithography, control of scaffold resolution down to the µm scale is achievable along with the ability to customize each fabricated scaffold to match the targeted replacement tissue. Matching the advanced manufacturing technique to polymer properties as well as maintaining the proper chemical, biological, and mechanical properties for tissue replacement is extremely challenging. This review discusses the design of polymers with tailored structure, architecture, and functionality for stereolithography, while maintaining chemical, biological, and mechanical properties to mimic a broad range of soft tissue types.

Improving cancer therapies by targeting the physical and chemical hallmarks of the tumor microenvironment.

Tumors are highly heterogeneous at the patient, tissue, cellular, and molecular levels. This multi-scale heterogeneity poses significant challenges for effective therapies, which ideally must not only distinguish between tumorous and healthy tissue, but also fully address the wide variety of tumorous sub-clones. Commonly used therapies either leverage a biological phenotype of cancer cells (e.g. high rate of proliferation) or indiscriminately kill all the cells present in a targeted volume. Tumor microenvironment (TME) targeting represents a promising therapeutic direction, because a number of TME hallmarks are conserved across different tumor types, despite the underlying genetic heterogeneity. Historically, TME targeting has largely focused on the cells that support tumor growth (e.g. vascular endothelial cells). However, by viewing the intrinsic physical and chemical alterations in the TME as additional therapeutic opportunities rather than barriers, a new class of TME-inspired treatments has great promise to complement or replace existing therapeutic strategies. In this review we summarize the physical and chemical hallmarks of the TME, and discuss how these tumor characteristics either currently are, or may ultimately be targeted to improve cancer therapies.

In vitro characterization of polyesters of aconitic acid, glycerol, and cinnamic acid for bone tissue engineering.

In this study, a novel class of polyesters of glycerol, aconitic acid, and cinnamic acid were synthesized along with their hydroxyapatite (HA) composites, and studied for their potential application in bone defect repair. An osteogenic study was conducted with human adipose derived mesenchymal stem cells (hASCs) to determine the osteoinductive ability of aconitic acid-glycerol (AG) polyesters, AG:HA (80:20), aconitic acid-glycerol-cinnamic acid (AGC) polyesters, and AGC:HA (80:20) to serve as bone scaffolds. The results indicate that AGC scaffolds have the highest mechanical strength in comparison to AG, AG:HA (80:20), and AGC:HA (80:20) scaffolds due to its low porosity. It was determined by cytotoxicity and osteogenesis experiments that hASCs cultured for 21 days on AG:HA (80:20) scaffolds in stromal medium exhibited a greater number of live cells than control PCL:HA composites. Moreover, hASCs cultured on foamed AG:HA (80:20) scaffolds resulted in the highest levels of mineralization, increased alkaline phosphatase (ALP) expression, and the greatest osteocalcin (OCN) expression after 21 days. Overall, AG:HA (100:0 and 80:20) scaffolds had higher mechanical strength and cytocompatibility than the PCL:HA control. In vitro osteogenic study demonstrated that AG:HA (100:0 and 80:20) synthesized using sugarcane industry by-products hold potential as scaffolds for bone tissue engineering applications.

A critical comparison of methyl and ethyl esters production from soybean and rice bran oil in the presence of microwaves.

Transesterification of vegetable oils (from soybeans and rice bran) into methyl and ethyl esters using a batch microwave system was investigated in this study. A critical comparison between the two alcohols was performed in terms of yields, quality, and reaction kinetics. Parameters tested were temperature (60, 70 and 80°C) and time (5, 10, 15 and 20 min). At all tested conditions, more than 96% conversion rates were obtained for both ethanol and methanol. Use of microwave technology to assist the transesterification process resulted in faster reaction times and reduced catalyst requirement (about ten-fold decrease). Methanol required lower alcohol:oil ratios than normally used in conventional heating, whereas ethanol required higher molar ratios. All esters produced using this method met ASTM biodiesel quality specifications. Methanol performed better in terms of performance and costs, while ethanol may have some environmental and safety benefits.

Oil extraction from Scenedesmus obliquus using a continuous microwave system--design, optimization, and quality characterization.

A 1.2 kW, 2450 MHz resonant continuous microwave processing system was designed and optimized for oil extraction from green algae (Scenedesmus obliquus). Algae-water suspension (1:1 w/w) was heated to 80 and 95°C, and subjected to extraction for up to 30 min. Maximum oil yield was achieved at 95°C and 30 min. The microwave system extracted 76-77% of total recoverable oil at 20-30 min and 95°C, compared to only 43-47% for water bath control. Extraction time and temperature had significant influence (p<0.0001) on extraction yield. Oil analysis indicated that microwaves extracted oil containing higher percentages of unsaturated and essential fatty acids (indicating higher quality). This study validates for the first time the efficiency of a continuous microwave system for extraction of lipids from algae. Higher oil yields, faster extraction rates and superior oil quality demonstrate this system's feasibility for oil extraction from a variety of feedstock.

Microwave assisted extraction of biodiesel feedstock from the seeds of invasive chinese tallow tree.

Chinese tallow tree (TT) seeds are a rich source of lipids and have the potential to be a biodiesel feedstock, but currently, its invasive nature does not favor large scale cultivation. Being a nonfood material, they have many advantages over conventional crops that are used for biodiesel production. The purpose of this study was to determine optimal oil extraction parameters in a batch-type and laboratory scale continuous-flow microwave system to obtain maximum oil recovery from whole TT seeds using ethanol as the extracting solvent. For the batch system, extractions were carried out for different time-temperature combinations ranging from 60 to 120 degrees C for up to 20 min. The batch system was modified for continuous extractions, which were carried out at 50, 60, and 73 degrees C and maintained for various residence times of up to 20 min. Control runs were performed under similar extraction conditions and the results compared well, especially when accounting for extremely short extraction times (minutes vs hours). Maximum yields of 35.32% and 32.51% (by weight of dry mass) were obtained for the continuous and batch process, respectively. The major advantage of microwave assisted solvent extraction is the reduced time of extraction required to obtain total recoverable lipids, with corresponding reduction in energy consumption costs per unit of lipid extracted. This study indicates that microwave extraction using ethanol as a solvent can be used as a viable alternative to conventional lipid extraction techniques for TT seeds.