Rhodium-Based Catalysts: An Impact of the Support Nature on the Catalytic Cyclohexane Ring Opening.

Because of the growing demand for high-quality fuels, the light cycle oil fraction improvement including cetane number improvement is important. The main way to reach this improvement is the ring opening of cyclic hydrocarbons, and a highly effective catalyst should be found. Cyclohexane ring openings are a possible option to investigate the catalyst activity. In this work, we investigated rhodium-loaded catalysts prepared using the commercially available industrial supports: single-component ones, SiO2 and Al2O3; and mixed oxides CaO + MgO + Al2O3 and Na2O + SiO2 + Al2O3. The catalysts were prepared by incipient wetness impregnation and investigated by N2 low-temperature adsorption-desorption, XRD, XPS, DRS UV-Vis and DRIFT spectroscopy, SEM, and TEM with EDX. The catalytic tests were performed in cyclohexane ring opening in the range of 275-325 °C. The best result was demonstrated by the sample 1Rh/CaMgAlO: the selectivity to n-hexane was about 75% while the cyclohexane conversion was about 25% at 275 °C. The space-time yield was up to 12 mmoln-hexane gcat-1h-1.

Understanding the Working Mechanism of the Novel HKUST-1@BPS Composite Materials as Stationary Phases for Liquid Chromatography.

Composite materials have been used based on coordination polymers or microporous metal-organic frameworks (MOFs) combined with mesoporous matrices for adsorption-related techniques, which enable outflanking some adverse phenomena manifested during pristine components operation and enhance the performance and selectivity of the resulting materials. In this work, for the first time, the novel HKUST-1@BPS composites synthesized by the microwave-assisted (MW) technique starting from microporous HKUST-1 (Cu3(btc)2) MOF and biporous silica matrix (BPS) with bimodal mesopore size distribution were comparatively studied as materials for liquid-phase adsorption techniques utilizing the high-performance liquid chromatography (HPLC) method and benzene as a model adsorbate. It was established that the studied HKUST-1@BPS composites can function as stationary phases for HPLC, unlike the pristine HKUST-1 and bare BPS materials, due to the synergetic effect of both components based on the preliminary enhanced adsorbate mass transfer throughout the silica mesopores and, subsequently, its penetrating into HKUST-1 micropores. The suggested mechanism involves the initial deactivation of open metal Cu2+ sites in the HKUST-1 framework structure by isopropanol molecules upon adding this polar component into the mobile phase in the region of the isopropanol concentration of 0.0 to 0.2 vol.%. Thereafter, at the medium range of varying the isopropanol concentration in the eluent of 0.2 to 0.3 vol.%, there is an expansion of the previously inaccessible adsorption centers in the HKUST-1@BPS composites. Subsequently, while further increasing the isopropanol volume fraction in the eluent in the region of 0.3 to 5.0 vol.%, the observed behavior of the studied chromatographic systems is similar to the quasi-normal-phase HPLC pattern. According to the obtained thermodynamic data, benzene adsorption into HKUST-1 micropores from solutions with a vol.% of isopropanol in the range of 0.4 to 5.0 follows the unique entropy-driven mechanism previously described for the MIL-53(Al) framework. It was found that HKUST-1 loading in the composites and their preparation conditions have pronounced effects on their physicochemical properties and adsorption performance, including the adsorption mechanism.

Ethanol to Acetaldehyde Conversion under Thermal and Microwave Heating of ZnO-CuO-SiO2 Modified with WC Nanoparticles.

The nonoxidative conversion of ethanol to acetaldehyde under thermal and microwave heating was studied on mixed oxide ZnO-CuO-SiO2 catalysts modified with additives of tungsten carbide nanoparticles. The results revealed that the WC-modified catalyst exhibited superior activity and selectivity under microwave heating conditions. It is assumed that when microwave heating is used, hot zones can appear at the contact points of WC nanoparticles and active centers of the mixed oxide ZnO-CuO-SiO2 catalyst, which intensively absorb microwave energy, allowing the more efficient formation of acetaldehyde at moderate temperatures. Thermodynamic calculations of equilibrium concentrations of reagents and products allowed us to identify the optimal conditions for effective acetaldehyde production. The initial catalyst and the catalyst prepared by the coprecipitation of the oxides with the addition of WC were characterized by physicochemical methods (TPR-H2, XRD, DRIFTS of adsorbed CO). The active centers of the oxide catalyst can be Cu+ cations.

Properties of Dicationic Disiloxane Ionic Liquids.

A number of dicationic ionic liquids with a disiloxane linker between imidazolium cations and bis(trifluoromethylsulfonyl)imide anion were synthesized and characterized. Melting points, viscosity, and volatility in a vacuum were measured; the thermal and hydrolytic stability of ionic liquids were also studied. The dependence of the properties on the structure of substituents in the cation of the ionic liquid was demonstrated.

Impact of the Preparation Procedure on the Performance of the Microporous HKUST-1 Metal-Organic Framework in the Liquid-Phase Separation of Aromatic Compounds.

To date, metal-organic frameworks (MOFs) have been recognized as promising solid phases in high-performance liquid chromatography (HPLC). This research aimed to elucidate the role of the physico-chemical characteristics of the microporous HKUST-1 metal-organic framework in its operation as a selective adsorbent in HPLC. For this, the HKUST-1 samples were prepared by microwave-assisted synthesis and a solvothermal procedure. According to the chromatographic examinations, the HKUST-1 material synthesized in the microwave fields shows an efficient performance in the selective adsorption of aromatic compounds with different functionalities. This study revealed a significant impact of the preparation procedure on the mechanism of the liquid-phase adsorption on the HKUST adsorbents under conditions of the HPLC. An effect of the elution solvent with the different coordination ability to the Cu2+ sites in the HKUST-1 structure on the adsorption selectivity was observed.

Adsorption of 2,4-dichlorophenoxyacetic acid in an aqueous medium on nanoscale MIL-53(Al) type materials.

A series of flexible metal-organic frameworks (MOFs) belonging to the MIL-53 family, such as MIL-53(Al), its amino-functionalized analog NH2-MIL-53(Al), and MIL-53(Al) type materials with Al3+ ions and mixed benzene-1,4-dicarboxylate and 2-aminobenzene-1,4-dicarboxylate linkers (MixLR) in various proportions were prepared in a nanocrystalline form using MW-activation under atmospheric pressure according to the original solvothermal procedure. The MIL-53(Al) and NH2-MIL-53(Al) samples feature nanocrystals with sizes of 200-300 nm, while MixLR matrices synthesized in this manner are composed of small nanoparticles with sizes of about 20-30 nm. MIL-53(Al) type materials (MIL-53(Al), NH2-MIL-53(Al) and MixLR) were probed in the adsorption of a typical herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) in an aqueous medium. This study revealed a strong impact of the flexibility and porosity of the synthesized MIL-53(Al) type matrices on their physicochemical characteristics. MIL-53(Al) type materials show much higher 2,4-D adsorption rates than an activated carbon matrix (CSAC). The structural characteristics of the studied MIL-53(Al) type materials were established with a high resolution X-ray powder diffractometer equipped with a synchrotron radiation source. The obtained results can be used for the development of advanced adsorbents based on MIL-53(Al) type materials for water remediation.