Enhanced Removal of Endocrine-Disrupting Compounds from Wastewater Using Reverse Osmosis Membrane with Titania Nanotube-Constructed Nanochannels.

This paper presents a comprehensive study of the performance of a newly developed titania nanotube incorporated RO membrane for endocrine-disrupting compound (EDC) removal at a low concentration. EDCs are known as an emerging contaminant, and if these pollutants are not properly removed, they can enter the water cycle and reach the water supply for residential use, causing harm to human health. Reverse osmosis (RO) has been known as a promising technology to remove EDCs. However, there is a lack of consensus on their performance, especially on the feed concentrations of EDC that vary from one source to another. In this study, polyamide thin-film composite (PA TFC) membrane was incorporated with one-dimensional titania nanotube (TNT) to mitigate trade-off between water permeability and solute rejection of EDC. The characterization indicated that the membrane surface hydrophilicity has been greatly increased with the presence of TNT. Using bisphenol A (BPA) and caffeine as model EDC, the removal efficiencies of the pristine TFC and thin-film nanocomposite (TFN) membranes were evaluated. Compared to TFC membrane, the membrane modified with 0.01% of TNT exhibited improved permeability of 50% and 49% for BPA and caffeine, respectively. A satisfactory BPA rejection of 89.05% and a caffeine rejection of 97.89% were achieved by the TNT incorporated TFN membranes. Furthermore, the greater hydrophilicity and smoother surface of 0.01 TFN membrane led to lower membrane fouling tendency under long-term filtration.

Removal of emerging organic micropollutants via modified-reverse osmosis/nanofiltration membranes: A review.

Hazardous micropollutants (MPs) such as pharmaceutically active compounds (PhACs), pesticides and personal care products (PCPs) have emerged as a critical concern nowadays for acquiring clean and safe water resources. In the last few decades, innumerable water treatment methods involving biodegradation, adsorption and advanced oxidation process have been utilized for the removal of MPs. Of these methods, membrane technology has proven to be a promising technique for the removal of MPs due to its sustainability, high efficiency and cost-effectiveness. Herein, the aim of this article is to provide a comprehensive review regarding the MPs rejection mechanisms of reverse osmosis (RO) and nanofiltration (NF) membranes after incorporation of nanomaterials and also surface modification atop the PA layer. Size exclusion, adsorption and electrostatic charge interaction mechanisms play important roles in governing the MP removal rate. In addition, this review also discusses the state-of-the-art research on the surface modification of thin film composite (TFC) membrane and nanomaterials-incorporated thin film nanocomposite (TFN) membrane in enhancing MPs removal performance. It is hoped that this review can provide insights in modifying the physicochemical properties of NF and RO membranes to achieve better performance in water treatment process, particularly for the removal of emerging hazardous substances.

The Influences of 1-Butyl-3-Methylimidazolium Tetrafluoroborate on Electrochemical, Thermal and Structural Studies as Ionic Liquid Gel Polymer Electrolyte.

After decades of development, ionic liquid gel polymer electrolytes (ILGPEs) are currently experiencing a renaissance as a promising electrolyte to be used in electrochemical devices. Their inherent tendency towards poor electrochemical properties have limited their applications and commercialization activities. Henceforth, gel polymer electrolyte (GPE) is being introduced to alleviate the abovementioned issues. In this work, the assessment of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] in poly (vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) to form ILGPE was done. The relationship of [BMIM][BF4] towards the dielectric properties at different wt. % ratios and temperature was ascertained. The results indicated that [BMIM]BF4 is able to facilitate fast conduction. Moreover, it was found that [BMIM][BF4] could serve as an effective agent in reducing crystallinity and glass transition temperature of the polymer and thus enhanced the ionic conductivity of the samples. Notwithstanding, the ILGPE sample possessed a high thermal stability up to 300 °C and good electrochemical stability of 4.2 V which are beneficial for operation in electrochemical devices. All in all, the correlation between the ionic liquid chemistry and electrochemical performances could provide a valuable insight to rational selection and design for ILGPE electrolytes.